Evaluation of Renal Toxicity by Combination Exposure to Melamine and Cyanuric Acid in Male Sprague-Dawley Rats

Son, Ji Yeon,Kang, Yoon Jong,Kim, Kyeong Seok,Kim, Tae Hyung,Lim, Sung Kwang,Lim, Hyun Jung,Jeong, Tae Cheon,Choi, Dal Woong,Chung, Kyu Hyuck,Lee, Byung Mu,Kim, Hyung Sik Korean Society of ToxicologyKorea Environmental Mu 2014 Toxicological Research Vol.30 No.2

Melamine-induced nephrotoxicity is closely associated with crystal formation in the kidney caused by combined exposure to melamine (Mel) and cyanuric acid (CA). However, there are few dosage-finding studies for toxicological evaluation of chronic co-exposure to Mel and CA. The objective of this study was to investigate the possible mechanism by which a Mel and CA mixture lead to renal toxicity in rats. Mel and CA were co-administered to rats via oral gavage for 50 days. Nephrotoxicity was determined by measuring blood urea nitrogen (BUN) and serum creatinine (sCr) levels. Relative kidney weights were significantly increased in rats after co-exposure to Mel+CA (63/6.3 or 630/6.3 mg/kg) mixtures. BUN and sCr levels were significantly increased after Mel and CA co-exposure. Taken together, significant increase in KIM-1, NGAL, and calbindin levels were observed in the urine of rats exposed to Mel+CA (63/6.3 or 630/6.3 mg/kg) compared with the corresponding control group. Histological analysis revealed epithelial degeneration and necrotic cell death in the proximal tubules of the kidney after co-exposure to Mel+CA (63/6.3 or 630/6.3 mg/kg). Our data suggest that Mel-mediated renal toxicity may be influenced by CA concentrations in Mel-contaminated milk or foods.

Evaluation of Renal Toxicity by Combination Exposure to Melamine and Cyanuric Acid in Male Sprague-Dawley Rats

Ji Yeon Son,Yoon Jong Kang,Kyeong Seok Kim,Tae Hyung Kim,Sung Kwang Lim,Hyun Jung Lim,Tae Cheon Jeong,Dal Woong Choi,Kyu Hyuck Chung,Byung Mu Lee,Hyung Sik Kim 한국독성학회 2014 Toxicological Research Vol.30 No.2

Melamine-induced nephrotoxicity is closely associated with crystal formation in the kidney caused by combined exposure to melamine (Mel) and cyanuric acid (CA). However, there are few dosage-finding studies for toxicological evaluation of chronic co-exposure to Mel and CA. The objective of this study was to investigate the possible mechanism by which a Mel and CA mixture lead to renal toxicity in rats. Mel and CA were co-administered to rats via oral gavage for 50 days. Nephrotoxicity was determined by measuring blood urea nitrogen (BUN) and serum creatinine (sCr) levels. Relative kidney weights were significantly increased in rats after co-exposure to Mel+CA (63/6.3 or 630/6.3 mg/kg) mixtures. BUN and sCr levels were significantly increased after Mel and CA co-exposure. Taken together, significant increase in KIM-1, NGAL, and calbindin levels were observed in the urine of rats exposed to Mel+CA (63/6.3 or 630/6.3 mg/kg) compared with the corresponding control group. Histological analysis revealed epithelial degeneration and necrotic cell death in the proximal tubules of the kidney after co-exposure to Mel+CA (63/6.3 or 630/6.3 mg/kg). Our data suggest that Mel-mediated renal toxicity may be influenced by CA concentrations in Mel-contaminated milk or foods.

유방생검에 대한 임상적 고찰

김천규 조선의대 1983 The Medical Journal of Chosun University Vol.8 No.1

와인딩 공정에서 접압롤의 동특성에 관한 연구

김성수,김규태,천성민,신기현 건국대학교 산업기술연구원 1997 건국기술연구논문지 Vol.22 No.-

In a web winding process, the contact roll plays many important roles in air entrainment control and WIT(Wound In Tension) regulation. The behavior of the contact roll significantly affects the winding tension characteristics specifically at the time of contact and separation when the tangential velocities of contact roll and winding roll are not synchronized. A new mathematical model which includes the behavior of the web tension, the winding roll, the carriage and the contact roll is derived for the control of the winding tension. By using the model derived, a non-linear PID(NPID) controller is designed to control the winding tension at the time of contact and separation between the contact roll and the winding roll. Computer simulation study showed that the performance of the winding system with the NPID controller was significantly improved compared with that of a system with PID controller.

합기도 수련생의 수련 지속 요인에 관한 연구

김의영,남승현,김석일,정용우,정천규 龍仁大學校 武道硏究所 1998 武道硏究所誌 Vol.9 No.1

This study investigated participants who have taken part in Hapkido continuously, in view of age, carrier in exercise, and gender and then analysed how these factors affect continuous participation in Hapkido. 1) The significant factors which enable the participants to continue Hapkido were revealed as health/physical fitness(71.67%), enjoyment / interrest (58.13%), self-protetio / guard(48.28%), phychological benefits(20.94%) 2) The factors of continuing Hapkido were different in ages, which showed significant differences in phychological benefits, skill fulfilment / challenge, accomplishment / position, charm, recreational activity. The response represented specifically in one or two areas in case of younger participants. The more aged, it showed relatively even distribution to the various responses due to the broaden span of thoughts. 3) The factors of continuing Hapkido were different in carrier, which showed significant differences in self-protection / grard, skill fulfillment / challenge, accomplishment/ position in different experiences in exercise. By the time of reaching first phase and second phase, it is thought to show the psychological effect of continuing exercise unconsciously in various areas. 4) The factors of continuing Hapkido were not different in gender, which implicated the fact that the overall attitude and thoughts on Hapkido of female participants and male participants are similar.

노령에서 고관절 골절에 영향을 주는 수상전 요인

김종오,윤여헌,고영도,유재두,정준모,방한천,강규복 대한골절학회 2002 대한골절학회지 Vol.15 No.4

목 적 : 노령에서 고관절골절의 여러 원인적 요인들과 상관관계를 분석, 그 연관성에 대해 알아 보고자 하였다. 대상 및 방법 : 2001년 1월부터 2002년 5월까지 대퇴 고관절 골절로 본원에서 치료받은 환자중 60세 이상이고 골밀도 검사를 시행받은 158례를 대상으로, 수상전 요인을 나이, 성별, 흡연여부, 비만정도, 골절종류, 수상장소, 다른 이환 질환, 골절전 활동도, 골밀도 검사, 수상당시 바닥의 경도, 수상당시 넘어진 방향, 수상에너지에 따라 대퇴 경부골절과 전자간 골절, 전자간 골절중 안정골절과 불안정 골절로 나눠 비교하였다. 결 과 : 80세 이상의 군에서 대퇴 전자간 골절이 대퇴 경부 골절에 비해 의미있게 많이 발생했음을 알 수 잇었으며(p<0.001) 환자의 수상전 활동정도의 비교에서도 활동정도가 낮았던 군에서 대퇴 전자간 골절이 의미있게 많이 발생하였다(p<0.001). 골밀도 검사에 따른 비교에서는 T-score -3.0 이하인 군에서 대퇴 전자간 골절이 많았으며(p<0.005), 수상에너지에 따른 비교에서는 적은 에너지에 의한 골절이 전자간 골절에서 많았다(p<0.05). 대퇴 전자간 골절은 안정 골절과 비안정 골절로 나눈 비교에서는 사회 활동이 어려운 ADL C이하의 군과(p<0.05), 골밀도 T-score -3.0 이하인군에서는 의미있는 차이를 보였다(p<0.001). 결 론 : 노령에서의 고관절 골절 중 80세 이상의 고령에서, 골밀도 T-score -3.0 이하인 경우, 일상생활 활동정도가 낮은 경우에, 비교적 적은 에너지에 의한 충격시에 대퇴 전자간 골절의 발생이 대퇴 경부 골절에 비해 의미있게 많았고 전자간 골절에서 불안정 골절은 사회활동이 적고 골밀도 T-score -3.0 이하인 경우 많음을 알수 있었다. Purpose : We studied the co-relation on the causes of the hip fracture through the analysis of a relevance on the etiological factors as increased incidence according increasing old age. Materials and Methods : Total 158 cases that treated on the hip fracture from 2001 Jan. to 2002 May were studied. The parameters were age, gender, smoking, obesity, type of fracture, place of fracture, other comorbidity, activity of daily living, bone marrow densitometry, hardness of floor, orientation, injury energy. And then, we analysis of difference between femur neck fracture and femur intretrochanter fracture and between stable femur intertrochanter fracture and unstable femur intertrochanter fracture. Results : The incidence of the femoral intertrochanteric fracture was larger significantly than that of the femoral neck fracture in the older then 80(p<0.001). On the comparison of the pre-fractural activity of daily living, the group revealed lower activity had larger incidence of femoral intertrochateric fracture(p<0.001). Also, the femoral intertrochanteric fracture was more larger osteoporosis patient group(p<0.005), and lower energy trauma(p<0.05). In a unstable femoral intertrochanteric fracture, 21 cases(77.7%) of total 27 cases were belong to the group of the activity of daily living scale below C(p<0.05), 24 cases pf 27 cases were belong to the osteoporosis patient who was estimated below -3.0 on T-score(p<0.001). Conclusion : In the hip fracture of the elderly patients, the femoral intertrochanteric fracture is more prevalance ratherthe femoral neck fracture on the cases of older patient more than 80 year-old, lower activity of daily living scale, lower T-score less than -3.0 on BMD, lower energy trauma. Also, in femur intertrochanter fracture, unstable fracture is more common in low daily activity and owteoporosis.

포장방법과 가열방법이 Hamburger patties의 품질에 미치는 영향

김천제,최병규 건국대학교 1991 學術誌 Vol.35 No.2

This study was carried but to investigate the influence of packaging and cooking method on the quality of hamburger patties during frozen storage at -18℃ by measuring the pH, TBA, VBN, cooking lobs and physical propertied. The value of pH in each treatment patties increased during storage period, but did not appear significant (p>0.05) with packaging method. TBA and VBN value some increased with storage period at 60 days and vacuum packaged patties was lowest theme vague with increased storage time. The changes of cooking loss during storage period did not observed significantly, but P. E. P. A-vacuum packaged sample was lowest and un-wrapped sample was highest. The changes of cooking toss according to cooking methods during frozen storage period was highest in microwave cooking, and then oil-frying>boiling>pan-frying was follows. In hardness according to cooking methods, microwave cooking was highest and pan-frying was lowest in significantly. In elasticity, panfrying was highest and microwave was lowest.

알레르기성 비염 환자에서 절지동물성 특이항원의 양성율 및 항원간 일치율

황규윤,남해선,박준수,권준택,백병준,김장묵,오천환,조성란 순천향의학연구소 2000 Journal of Soonchunhyang Medical Science Vol.6 No.2

The current study was designed to evaluate the positive rates of arthropod allergens by Korean inhalant panel of MAST-CLA in patients with allergic rhinitis. One hundred sixty patients, diagnosed to allergic rhinitis in an Out Patient Center of Soonchunhyang University Chunan Hopsital during Aug 1998 to July 2000, were studied. 1. The overall positive rate among 35 specific allergens was 59.4% (95 patients). 2. The arthropod related allergen accounted for 82.1% (78 patients) of the positive rate. 3. Each positive rate of Dermatophagoides farinae (Df), Dermatophagoides pteronyssinus (Dp), house dust (Hd), and cockroach mix (Cm) was 45.0% (72 patients), 43.1% (69 patients), 28.1% (45 patients), and 8.8% (14 patients), respectively. 4.Significant agreement between arthropod allergens was observer (P < 0.05). 5. The obseved agreement between Df and Dp was 95.6%, showing most significant Kappa index (Kappa = 0.911, P < 0.001). There results suggested that although MAST-CLA is a useful measure of identifying specific allergens, the specificity of two mite allergen relatively low, implying because of common allergen between mites in Korean panel of MAST-CLA. Our data also supported that arthropod is the major cause of allergen in patients with allergic rhinitis, however, the MAST-CLA should be modified in order to exclude common allergen of mite and to include more specific mite allergen.

고속가공용 엔드밀 형상설계 S/W 개발

한창규,고성림,서천석,김경배 한국공작기계학회 2004 한국공작기계학회 추계학술대회논문집 Vol.2004 No.-

The tool geometry parameters and cutting process have complex relationships. Until now, various cutting test were needed to acquire optimal design of end mill for the purpose of high speed machining, due to the insufficient knowledge about cutting process in high speed machining. Using various tools with different geometry, relationships between tool geometry parameter (rake angle, clearance angle, length of cutter) and cutting process (cutting force, surface accuracy, surface roughness) have been studied. Acquired data can be used to design optimal tool for high speed machining and to develop a software for design of end mill geometry.

엔드밀 형상에 따른 가공특성 분석을 이용한 형상설계 S/W 개발

한창규,고성림,유중학,서천석,김경배 한국공작기계학회 2004 한국공작기계학회 춘계학술대회논문집 Vol.2004 No.-

The tool geometry parameters and cutting process have complex relationships. Until now, various cutting test were needed to acquire optimal design of end mill for the purpose of high speed machining, due to the insufficient knowledge about cutting process in high speed machining. Using various tools with different geometry, relationships between tool geometry parameter (rake angle, clearance angle, length of cutter) and cutting process (cutting force, surface accuracy, surface roughness) have been studied. Acquired data can be used to design optimal tool for high speed machining and developed tool geometry design S/W.