별'에 대한 초등학교 교사와 학생들의 幼年的 槪念과 核心 信念 비교

오준형,채동현 경북대학교 사범대학 부속 중등교육연구소 2004 중등교육연구 Vol.52 No.1

This article presents the results which investigated elementary school students' and teachers' conceptions about the stars. Samples consisted of one hundred forty eight 5th-grade students, one hundred seventy four 6th-grade students, and thirty eight primary science teachers. Research method was paper-pencil test. Their responses to these questions revealed considerable apparent naive conceptions. and the study results proved that the items showing a high response rate of teachers' childhood concept also resulted in a high response rate of students' naive concept. A great of this apparent inconsistency could be explained by assuming that the students used, a naive core belief of the stars other than a target scientific concept of the stars. And, elementary school students and teachers often held a different naive core beliefs based on their other experiences rather than scientific theories. this paper was also discussed the core beliefs that elementary school students and teachers held to overcome these naive conceptions.

濕式法에 依한 輝安鑛으로부터 三酸化 안티모니의 製造에 關하여

오재현,김준수,고인용,정원용 연세대학교 산업기술연구소 1979 논문집 Vol.11 No.1

An investigation on the production of high purity Sb₂O₃was carried out by means of the acid leaching process from the roasted ore of stibnite. The approach of these studies has been to investigate purity, particle size, recovery and crystal structure of Sb₂O₃obtained through the subsequent treatments of leaching, hydrolysis and neutralization under various conditions. The results obtained in these experiments are summarized as follows; 1) It was possible to use dilute hydrochloric acid to extract Sb₂O₃from the roasted stibnite. Because of the prior roasting treatment, the contamination of impurities could also be reduced in the final products. 2) The rate of extraction of Sb₂O₃from the roasted stibnite was increased concentration of hydro-chloric acid as increased amount of addition of the acid. 3) The yield of Sb₂O₃obtained by hydrolysis of SbCl₃was increased with increasing temperature of hydrolysis. 4) The crystal structure of Sb₂O₃obtained by hydrolysis of SbCl₃at 20℃(room temperature) was confirmed as a orthorhombic crystal structure which is the same as that of valentinite. The recovery of Sb₂O₃from the roasted ore appeared to be nearly 100% under optimum conditions.

이동로봇의 실시간 장애물인식에 관한 연구

오세봉,Nguyen Huu Cong,김준홍,조창제,한성현 한국공작기계학회 2008 한국공작기계학회 추계학술대회논문집 Vol.2008 No.-

This paper achieves a research about avoidance of obstacles avoidance based on ultrasonic sensor. The performance of the proposed obstacle avoidance robot controller in order to determine the exact dynamic systems modeling system that uncertainty is difficult for nomadic controlled robot direction angle by ultrasonic sensors throughout controlled performance tests. In additionally, this study is an in different ways than the self-driving simulator in the development of ultrasonic sensors and unmanned remote control techniques used by the self-driving robot controlled driving through an unmanned remote controlled unmanned realize the performance of factory automation.

치과용 심미 수복 재료들의 색상 연구를 통한 새로운 치과용 색체계의 제안

오윤정,박수정,김동준,조현구,황윤찬,오원만,황인남 대한치과보존학회 2007 Restorative Dentistry & Endodontics Vol.32 No.1

본 연구는 새로운 치과용 색체계 개발을 목적으로 현재 치과에서 사용되고 있는 Vita shade를 사용하는 9 제조사의 12종의 광중합형 복합레진과 1종의 치과용 도재의 색상을 diffuse/8° 수광 방식을 사용하는 분광색체계 (MiniScan XE plus, Model 4000S, Hunter Lab, USA)를 이용해 D65 표준광과 10도 관찰자 시야 하에서 CIE L^(*)a^(*)b^(*) 값을 측정하고 색상 범위를 분석하였다. 분석한 정보를 color sorting system을 응용한 CNU Cons Dental Color Chart의 색상 표현 방식인 T###에 치과용 수복 재료들의 범위를 적용하여 다음의 결과를 얻었다. 측정된 L^(*)a^(*)b^(*)값의 분포를 분석해 보면 L^(*)값은 80.40과 52.70 사이에, a^(*)값은 10.60과-3.60 사이에, 그리고 b^(*)값은 28.40과 2.21 사이에 분포한다. L^(*)값의 평균값은 67.40, 중앙값은 67.30이며, a^(*)값은 2.89와 2.91, b^(*)값은 14.30 과 13.90 이다. 이러한 분석을 토대로 CNU Cons Dental Color Chart의 T###의 첫 번째 숫자에 해당하는 L^(*)값의 각 숫자간의 차이는 2.0으로, 그리고 2번째 숫자인 a^(*)값의 각 숫자간의 차이는 1, 그리고 세 번째 숫자인 b^(*)값의 각 숫자간의 차이는 2로 정하였다. T555에 해당하는 L^(*)값의 범위는 66.0이상, 68.0미만으로, a^(*)값의 범위는 3이상 4미만으로, b^(*)값의 범위는 14이상 16미만으로 결정하였다. The purpose of this study is to develope new dental color-space system. Twelve kinds of dental composites and one kind of dental porcelain were used in this study. Disk samples (15 ㎜ in diameter, 4 ㎜ in thickness) of used materials were made and sample’s CIE L^(*)a^(*)b^(*) value was measured by Spectrocolorimeter (MiniScan XE plus, Model 4000S, diffuse/8° viewing mode, 14.3 ㎜ Port diameters, Hunter Lab. USA). The range of measured color distribution was analyzed. All the data were applied in the form of T### which is expression unit in CNU Cons Dental Color Chart. The value of L^(*) lies between 80.40 and 52.70. The value of a^(*) are between 10.60 and 3.60 and b^(*) are between 28.40 and 2.21. The average value of L^(*) is 67.40, and median value is 67.30. The value of a^(*) are 2.89 and 2.91 respectively. And for the b^(*), 14.30 and 13.90 were obtained. The data were converted to T### that is the unit count system in CNU-Cons Dental Color Chart. The value of L^(*) is converted in the first digit of the numbering system. Each unit is 2.0 measured values. The second digit is the value of a^(*) and is converted new number by 1.0 measured value. For the third digit b^(*) is replaced and it is 2.0 measured unit apart. T555 was set to the value of L^(*) ranging from 66.0 to 68.0, value of a^(*) ranging from 3 to 4 and b^(*) value ranging from 14 to 16.

시그마 수준과 계산 방법에 대한 고찰

박준오,박성현 한국품질경영학회 2003 품질경영학회지 Vol.31 No.2

It is very important to understand and interpret the meaning of the sigma level correctly through the Six Sigma project. Especially, the confusion over the relation between sigma level from the short-term point of view and defective proportion or DPMO from the long-term point of view may make a big gap between expected results of the Six Sigma project and real results in the field. The one-tail approximation is commonly used to calculate the sigma level both in most literatures introducing Six Sigma and actual cases of the Six Sigma project. Since the one-tail approximation undervalues the sigma level of the fields such as business and service of which the sigma level is generally low, however, there can be misleading results of the explanation of the sigma level and inappropriate project evaluation. This paper describes the relation between sigma level and defective proportion in detail and clears the difference between the one-tail and two-tail approximation.

이중혈류유발 심폐소생술이 심정지를 유발한 개의 단기 생존율에 미치는 영향

황성오,조준휘,강구현,김성환,문중범,이강현,이승환,윤정한,최경훈,홍은석 대한응급의학회 2000 대한응급의학회지 Vol.11 No.3

Background and Objectives: We previously reported that, compared with standard cardiopulmonary resuscitation(S-CPR), better hemodynamic effects could be achieved by simultaneous sterno-thoracic cardiopulmonary resuscitation(SST-CPR) in which we compressed the sternum and constricted the thorax circumferentially during the systolic period by using a device. This study was designed to assess whether SST-CPR, compared with S-CPR, improve the survival rate of dogs with cardiac arrest. Subjects and methods: Twenty-five mongrel dogs(19∼31㎏) were enrolled in this study. After four minutes of ventricular fibrillation induced by an AC current, animals were randomized to resuscitate with either S-CPR(n=13) or SST-CPR(n=12). Epinephrine(1 ㎎) was injected into the right atrium every three minutes after the beginning of CPR. Defibrillation was attempted after 6 minutes of CPR. Standard advanced cardiac life support was started if defibrillation was not successful. Results: SST-CPR resulted in significantly(p<0.001) higher systolic arterial pressure(91±47 vs 47±24 ㎜ Hg), diastolic pressure(43±24 vs 17±10 ㎜ Hg), coronary perfusion pressure(35±25 vs 13±9㎜ Hg), and end tidal CO2 tension(9±4 vs 3±2 ㎜ Hg). Two of 13 animals(15 %) resuscitated with S-CPR and six of 12 animals(50%) resuscitated with SST-CPR survived until 12 hours after cardiac arrest(p<0.05). Donclusion: SST-CPR, compared with S-CPR, improves the short-term survival rate in canine cardiac arrest.

IPO의 初期收益率과 長期收益率에 관한 實證硏究

林俊亨,吳起賢 조선대학교 경영경제연구소 1997 經營經濟硏究 = Management and economics research Vol.20 No.1

이동로봇의 장애물 회피기술

김준홍,심병균,오세봉,Nguyen Huu Cong,한성현 한국공작기계학회 2008 한국공작기계학회 춘계학술대회논문집 Vol.2008 No.-

In this paper, it is presented a new approach to the design of intelligent control system of a autonomous robot with two drive wheel. The proposed control scheme uses a Gaussian function as a unit function in the fuzzy neural network, and back propagation algorithm to train the fuzzy neural network controller in the framework of the specialized learning architecture, It is proposed a learning controller consisting of two neural network-fuzzy based on independent reasoning and a connection net with fixed weights to simply the neural networks-fuzzy. The performance of the proposed controller is shown by performing the computer simulation for trajectory tracking of the speed and azimuth of a mobile robot driven by two independent wheels

전신성 홍반성 루프스 환자에서 발생한 자가 면역성 간염 1례

김준재,백나나,김현정,전태주,서동대,오태훈,최원충 인제대학교 2008 仁濟醫學 Vol.29 No.-

SLE 환자에서 간 효소 수치의 상승은 여러 가지 원인에 의하여 드물지 않게 관찰될 수 있다. 이 중 자가 면역 기전에 의해 발생되는 질환으로 자가 면역성 간염과 SLE에 동반된 간염이 있으며, 두 가지 질환의 감별은 환자의 예후 및 치료에 중요하다. 따라서 간 조직 검사를 포함한 정확한 진단 기준으로 조기에 진단하여야 하며, 이에 따른 적절한 치료를 통해서 간 부전 및 비가역적 간경변증으로 진행을 방지할 수 있을 것으로 사료된다. Patients with systemic lupus erythematosus (SLE) have a 25-50% chance of developing abnormal liver tests in their lifetime and various causes are related to elevation of liver enzyme, such as hepatic involvement of lupus, hepatotoxic drug, viral infection, autoimmune hepatitis and so on. Discrimination of autoimmune hepatitis from SLE-associated hepatitis is important because complications and therapy are quite different, although both are autoimmune syndromes. Here we are presenting a case of SLE patient with type I autoimmune hepatitis proved with liver biopsy.

웹 기반 건설 하도급 대금지불 프로세스 모델

노준오,이현종,구교진,현창택 대한건축학회 2004 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.24 No.1

The purpose of this study is to improve the subcontract payment process in domestic Construction industry. This study researches the previous documents and payment processes of construction company so that improves subcontract payment process. Recently, subcontract increase with time in domestic construction industry. But many subcontract companies have difficulty in financing problems because of unreasonable practice. Requesting a payment, contractor and subcontractor make out a payment so their time and effort necessarily were spent. Therefore unnecessary things are removed in subcontract payment process so that settle a reasonable subcontract payment process.