http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
증례 : 내분비-대사; 갑상선암과 자궁내막암에서 동시에 전이된 경부림프절에 관한 증례
박경선 ( Kyeong Seon Park ),박효진 ( Hyo Jin Park ),홍아람 ( A Ram Hong ),김영기 ( Yeong Gi Kim ),문재훈 ( Jae Hoon Moon ),박영주 ( Young Joo Park ) 대한내과학회 2014 대한내과학회지 Vol.86 No.3
A 54-year-old woman presenting with dizziness was diagnosed with a metastatic brain tumor. Imaging studies to identify the primary cancer revealed endometrial thickening with a left adnexal mass, enlarged bilateral external iliac lymph nodes, and multiple attenuated nodules in both lobes of the thyroid gland with enlarged central neck nodes. After curettage of the uterine endometrium and ultrasonography-guided gun biopsy of the thyroid gland to confirm uterine and thyroid cancers, respectively, total abdominal hysterectomy with bilateral salpingo-oophorectomy and total thyroidectomy with bilateral central neck dissection were performed. Histopathologic examination of the removed tissues demonstrated both endometrial carcinoma metastasis to the thyroid gland and primary thyroid cancer with synchronous central neck node metastasis originating in the endometrium and thyroid. Three of the four right central lymph nodes were positive for metastatic papillary carcinoma; on the other hand, the remaining right central lymph node and one of the two left central lymph nodes were confirmed to be positive for metastatic endometrial carcinoma.
열 및 물질수지 모델을 활용한 하수슬러지 Bio-drying 공정 평가: 공급공기 온도 및 배출가스 온도에 의한 영향을 중심으로
박재람(Jae-Ram Park),이동훈(Dong-Hoon Lee),김경현(Kyung-Hyun Kim) 대한환경공학회 2020 대한환경공학회지 Vol.42 No.11
목적 : 하수슬러지 bio-drying 공정에서의 수분 제거에 대한 공급공기 온도 및 배출가스 온도제어범위의 영향을 본 공정의 모의를 통해 평가하였으며, 이와 더불어 bio-drying 공정의 수분 제거에 대한 성능 및 효율 지표를 제안하고 이의 효용성을 판단하였다. 방법 : 열 및 물질수지 모델을 수립하고 공급공기 온도와 배출가스 온도제어범위의 조합을 달리하여 하수슬러지 bio-drying 공정의 모의를 수행하였다. 수분 제거에 대한 성능 및 효율 평가를 위한 지표를 선정하여 모의결과를 분석하였다. 결과 및 토의 : 유기물 분해율은 공급공기 온도가 높고 배출가스 온도제어범위가 낮을수록 저감되는 반면, 수분 제거율은 공급공기 온도가 상온에 가까울수록 45~50℃의 특정 배출가스 온도제어범위에서 증가하였다. 고온의 공기공급에 의해 대사열 뿐만 아니라 대류열도 함께 bio-drying 공정의 건조 열원으로 활용됨으로써 건조 성능이 향상될 수 있었다. 또한, bio-drying 공정의 성능 지표로 수분 제거속도가, 효율 지표로는 수분 제거능과 수분 제거비가 제안될 수 있으며, 특히, 수분 제거비는 열적 건조 효율을 대체할 수 있음이 확인되었다. 결론 : 하수슬러지 bio-drying 공정에서 상온의 공기를 공급하는 경우 배출가스 온도가 45~50℃ 범위에 존재할 수 있도록 공기공급량을 제어하는 것이 성능 및 효율 측면에서 가장 효과적인 것으로 확인되었다. 제안된 성능 및 효율 지표의 활용에 있어 bio-drying 공정에 특정된 해당 지표의 범위 또는 최소 요구치 등의 산정이 필요할 것으로 사료된다. Objectives : The effects of temperatures of supplied air and exhaust gas on moisture removal in the bio-drying process of sewage sludge were assessed by simulating the process. We also suggested performance and efficiency indicators for moisture removal in this process and identified their effectivity. Methods : The bio-drying process of sewage sludge was simulated by mathematical modeling of heat and mass balance under different combinations of supplied-air temperatures and control ranges of exhaust gas temperatures. The simulation results were analyzed by using some indicators for assessing the performance and efficiency of moisture removal. Results and Discussion : While BVS (biodegradable volatile solid) degradation was inhibited at a higher supplied-air temperature and a lower control range of exhaust gas temperature, moisture reduction was enhanced at the supplied-air temperature nearer to ambient and the controlled exhaust gas temperature for 45 to 50℃. The drying performance could be improved by the utilization of both metabolic heat and convective heat from hot supplied-air for the source of heat necessary for moisture removal. We suggested the moisture removal rate as a performance indicator, and both the moisture removing capacity of supplied-air and the mass ratio of moisture removal to BVS degradation as an efficiency indicator. We identified that this mass ratio could be an alternative for thermal efficiency of drying. Conclusions : It is effective to control the air-flow rate to keep the exhaust gas temperature within 45~50℃ during bio-drying of sewage sludge in terms of drying performance and efficiency. It is expected that a specified range or minimum required value for the performance and efficiency indicators in the bio-drying process which suggested in this study needs to be established.
박아람,김병주,국훈,우영종,최영륜,마재숙,황태주,Park, A-Ram,Kim, Byung-Ju,Kook, Hoon,Woo, Young-Jong,Choi, Young-Youn,Ma, Jae-Sook,Hwang, Tai-Ju 대한소아소화기영양학회 2000 Pediatric gastroenterology, hepatology & nutrition Vol.3 No.2
Gastroduodenal intussusception is an invagination of part of the stomach through the pylorus and into the duodenum for a varying distance. The lead point of the intussusception is usually a benign gastric tumor such as gastric adenoma. We report a case of gastroduodenal intussusception in a 33-month-old boy presented with nonbilious vomiting and abdominal pain. Laparotomy revealed a gastroduodenal intussusception. After reduction and gastrostomy, a mass measuring $15{\times}5\;cm$ in size, was found at the leading point of the intussusceptum. The mass was resected, and pathological diagnosis showed a gastric hemangiomatosis.
이좌형,박총명,허난숙,조영태,권영완,한우람,선주호,김종욱,유제욱,이강희,정인범,Lee, Joa-Hyoung,Park, Chong-Myung,Heo, Nan-Sook,Jo, Young-Tae,Kwon, Young-Wan,Han, Woo-Ram,Seon, Ju-Ho,Kim, Jong-Wook,Yoo, Jae-Wook,Lee, Kang-Hee,Jung, In-B 한국정보통신학회 2008 한국정보통신학회논문지 Vol.12 No.9
디지털 이미지의 증가로 인해 최근에는 디지털 이미지을 보관하고 감상하기 위한 목적의 전자액자가 등장하였고 전자액자의 가격도 점차 낮아져 새로운 사진 감상용 매체로 떠오르고 있다. 하지만 현재의 전자액자는 주로 사진 출력과 로컬의 동영상 재생의 기능만을 가지고 있다. 이에 본 논문에서는 사용자에게 보다 다양한 서비스를 제공할 수 있는 유비쿼터스 기반의 새로운 전자액자를 설계하고 구현한다. 본 논문에서 제안하는 유비쿼터스 전자액자는 멀티미디어 센서 네트워크와 연동하여 주위 환경 정보 및 특정 지역의 이미지 정보를 사용자에게 제공하여 다양한 응용이 가능하고 네트워크 대역폭에 따른 동적인 동영상 스트리밍을 통해 사용자에게 끊김 없는 동영상을 제공할 수 있다. 또한 웹과 연동하여 인터넷이 되는 곳이라면 언제 어디서든지 사용자가 원하는 컨텐츠를 업로드 하고 전자액자로 출력시킬 수 있다. As the performance of digital camera keeps going on, the digital camera becomes into wide use recently so that the number of digital images taken by digital camera is increased rapidly. Given the augmentation of digital images, the digital photo frame has appeared for storing and enjoying the digital image and receives attention as the price of digital frame becomes down. However, users with the existing digital frame only could display the digital images and stream media stored in local disk. In the paper, we design and implement a new digital photo frame baled on ubiquitous which could provide a more variety of service to the user. With the proposed digital photo frame, the user could obtain the environment information and the digital image from multimedia sensor network. The users also could enjoy the various stream media stored in the remote streaming server seamlessly. In addition, the user could update the digital image through the web site at anywhere.
탄산리튬으로부터 수산화리튬 전환을 위하여 탄산리튬의 열분해에 대한 연구
박재은,박민화,서형준,김태성,김대원,김보람,최희락,Park, Jae Eun,Park, Min Hwa,Seo, Hyeong Jun,Kim, Tae Seong,Kim, Dae Weon,Kim, Bo Ram,Choi, Hee Lack 한국결정성장학회 2021 한국결정성장학회지 Vol.31 No.2
현재 리튬이온 배터리에 사용되는 고니켈계 양극재의 수요 증대에 따라 수산화리튬(LiOH) 제조 연구가 활발히 진행되고 있다. 본 논문에서는 탄산리튬(Li2CO3)으로부터 수산화리튬의 제조를 위하여, 탄산리튬의 열분해를 통한 산화리튬(Li2O)의 전환 공정에 대해 연구하였다. 열처리 시 탄산리튬과 알루미나, 석영 그리고 흑연 도가니 사용에 따른 반응 메커니즘을 확인하였으며, 흑연 도가니를 사용했을 경우 온전한 산화리튬 분말을 얻었다. TG 분석 결과를 바탕으로 열처리 온도를 700℃, 900℃ 그리고 1100℃로 설정하였으며 유지시간 및 분위기를 제어하여 시약급 탄산리튬의 열처리를 진행하였다. XRD 분석 결과, 제조된 산화리튬은 질소 분위기에서 1시간 동안 1100℃의 온도로 열처리를 하였을 때 높은 결정성을 보였다. 또한 수산화리튬으로 전환하기 위해 시약급 산화리튬을 100℃에서 수반응하였다. XRD 분석을 통해 수산화리튬(LiOH)과 수산화리튬 일수화물(LiOH·H2O)이 생성됨을 확인하였다. Research on the production of lithium hydroxide (LiOH) has been actively conducted in response to the increasing demand for high nickel-based positive electrode materials for lithium-ion batteries. Herein we studied the conversion of lithium oxide (Li2O) through thermal decomposition of lithium carbonate for the production of lithium hydroxide from lithium carbonate (Li2CO3). The reaction mechanism of lithium carbonate with alumina, quartz and graphite crucible during heat treatment was confirmed. When graphite crucible was used, complete lithium oxide powder was obtained. Based on the TG analysis results, reagent-grade lithium carbonate was heat-treated at 700℃, 900℃ and 1100℃ for various time and atmosphere conditions. XRD analysis showed the produced lithium oxide showed high crystallinity at 1100℃ for 1 hour in a nitrogen atmosphere. In addition, several reagent-grade lithium oxides were reacted at 100℃ to convert to lithium hydroxide. XRD analysis confirmed that lithium hydroxide (LiOH) and lithium hydroxide monohydrate (LiOH·H2O) were produced.
주방용오물분쇄기 도입 타당성 연구: 서울시 시범사업 사례를 중심으로
배성진 ( Sung Jin Bae ),박재람 ( Jae Ram Park ),함근용 ( Geun Yong Ham ),곽예봉 ( Ruifeng Guo ),최선봉 ( Sun Bong Choi ),서동천 ( Dong Cheon Seo ),이동훈 ( Dong Hoon Lee ) 한국폐기물자원순환학회(구 한국폐기물학회) 2017 한국폐기물자원순환학회 춘계학술발표논문집 Vol.2017 No.-
음식물류폐기물은 배출, 수거 및 처리단계에서 여러 문제점을 내포하고 있다. 배출 및 수거 단계에서는 보관용기 주변에서 발생되는 악취 및 해충 등 위생상의 문제점, 처리 단계에서는 음식폐기물 재활용 산물의 낮은 품질로 인한 유통상의 문제점 등을 들 수 있다. 또한 서울연구원에서 실시한 설문조사에 따르면, 가정 생활폐 기물을 배출하는 데 있어서 가장 어려움을 느끼는 것이 음식폐기물의 배출(50.7%)이라고 응답하였고 주방용오물분쇄기(이하 디스포저) 사용이 허용된다면 사용할 의사가 있다는 응답이 매우 높았다(82.8%). 이에 따라 서울시에서는 디스포저 도입의 타당성을 평가하기 위하여 2009년과 2010년 및 2015년에 배수전처리, 정화조병합, 고액분리 등 총 3가지의 전처리시스템에 대한 시범사업을 실시하였다. 모니터링 항목에는 음식폐기물발생원단위, 디스포저 오수 발생량 및 오염부하량, 디스포저 사용 전후 오수의 성상 변화, 및 주민설문조사 등이 포함되었다. 시범사업의 모니터링 결과, 음식물류폐기물 발생원단위는 0.12~0.15kg/cap·dayfh 측정되었는데, 이는 환경부통계 자료의 30~50% 수준이었다. 주방오수발생량원단위는 29.9L/cap·day, 분쇄오수발생량원단위는 4.1L/cap·day로 측정되었으며, 이는 일본의 국토교통성에서 제시한 자료(30L/cap·day, 5L/cap·day)와 거의 일치하였다. 디스포저 사용 후 배수전처리시설과 정화조병합처리시설 및 고형물회수시설 후단에서 측정된 각각의 BOD는 20.9, 67.8 및 129.0mg/L, SS는 63.7, 47.5 및 63.0mg/L, n-Hexane 추출물질은 18.8, 27.5 및 54.0mg/L를 나타내었다. 시범사업을 통해 전처리시설을 설치하고 디스포저를 사용하는 경우에 공공하수도에 미치는 영향이 매우 적은 것으로 확인되었고, 사용 주민을 대상으로 한 설문조사에서도 현재 법으로 금지되어 있는 디스포저 사용이 허용될 경우 90% 이상의 주민이 사용할 의향이 있다고 조사되었다.