섬유보강 다공성 옥상녹화 황토콘크리트의 물리·역학적 및 온도변화 특성 평가

오리온,김춘수,김황희,전지홍,권완식,박찬기,Oh, Ri On,Kim, Chun Soo,Kim, Hwang Hee,Jeon, Ji Hong,Kwon, Wan Sig,Park, Chan Gi 한국농공학회 2013 한국농공학회논문집 Vol.55 No.4

The physical, mechanical, water purification and temperature properties of fiber reinforced porous hwang-toh green roof concrete have been evaluated in this study. The effect of the depending on replacement ratio of blast furnace slag to cement was investigated such that the replacement ratio is varied to 0 % and 30 %. Also, the replacement ratios of hwang-toh were 0, 20 and 30 %. The polyvinyl alcohol fiber was used for the reinforcing fiber. A series of pH test, unit weight, void ratio, compressive strength, after purification and variation of temperature test have been performed to evaluate the performance, water purification effect and temperature properties of the fiber reinforced porous hwang-toh green roof concrete. The test results indicate that the physical and mechanical properties of fiber reinforced porous hwang-toh green roof concrete is affected by the replacement ratio of the blast furnace slag and hwang-toh contents. Results of purifying water showed that the water purification effect of porous hwang-toh green roof concrete is about 40 %. Also, the temperature properties test results indicate the green roof blocks using fiber reinforced porous hwang-toh green roof concrete have insulation and temperature reduction effect.

Corrigendum to “Vertebral Body Anterior Translation, a Novel Technique for Delayed Myelopathy Due to Osteoporotic Spine Fractures”

Jung Soo Lee,Dong Ki Ahn,Won Shick Shin,Kyung Jun Cho,Young Rok Ko,Il Chan Hwang 대한정형외과학회 2022 Clinics in Orthopedic Surgery Vol.14 No.4

Clinics in Orthopedic Surgery 2020;12:485-492 https://doi.org/10.4055/cios20028 In the article entitled “Vertebral body anterior translation, a novel technique for delayed myelopathy due to osteoporotic spine fractures,”1) the name of one of the authors was incorrectly presented: Il Chan Whang should read Il Chan Hwang.

유산양 유방염에 대한 Chitosan 약침의 치료 효과

황수현,서진석,김덕환,김명철,신상태,전무형,南三郞,김영찬,이우근,표수일 충남대학교 수의과대학 동물의과학연구소 1999 動物醫科學硏究誌 Vol.7 No.-

To improve the therapeutic method for mastitis, treatment effect of chitosan pharmacopuncture was examined in three milking goats(A,B and C). Mastitis was artificially induced in two milking goats(A and B) and one goat(C) was naturally infected case with mastitis. The acupoint used was Yang-Ming and chitosan suspensions(provided from Tottory University, Japan: 30㎎ of chitosan/㎖)were injected to the acupoint with 5㎖/time for 3 days, respectively. As for the change of somatic cells in milk along with chitosan pharmacopuncture, they showed a decreasing tendency after increase on the 3rd day in all udders of B. In addition, as for the change of total leukocyte counts of peripheral blood with chitosan pharmacopuncture, they showed a decreasing tendency after increase on the 3rd day in B and C except A which showed a increasing tendency until on the 7th day. In the change of neutrophil/lymphocyte(N/L) ratio, increasing tendency was seen in A and C but increasing tendency after slight decrease was observed in B. Further, in the change of serum total protein and A/G ratio, serum total protein content was decreased after slightly increase on the 3rd day in A, and they were decreased after increase until on the 7th day in B and C, respectively. As for the change of A/G ratio, different pattern increasing tendency was shown in A, B and C.

항공 교통 관제를 위한 데이타베이스 시스템에 관한 연구

황수찬,이강웅 한국항공대학교 1992 論文集 Vol.30 No.-

본 논문에서는 객체 중심개념을 기반으로한 지식 처리 기법을 이용하여 ATC 업무를 효율적으로 보조할 수 있는 데이타베이스 시스템을 제시하였다. ATC 업무에 관련된 지식을 데이타베이스에 효율적으로 표현하고 처리할 수 있는 방안으로써 객체 중심 관계성 데이타 모델을 개발하여 다양한 제약조건 및 관계성을 데이타베이스에 정확히 모델링할 수 있도록 하였으며, 이 모델을 이용하여 ATC에 관련된 자료 및 지식들을 컴퓨터에 저장, 관리, 이용할 수 있는 방안을 보였다. 그리고 본 논문에서 제시한 지식 처리 데이타베이스 시스템을 이용한 ATC 보조 시스템의 구현 방안도 제시하였다. In this paper, we present the database system which aids ATC jobs using knowledge processing techniques based on the object-oriented paradigm. In order to represent the knowledge for ATC jobs into databases and process them efficiently, we developed a data model Object -Oriented Relationship data Model which provides facilities for modeling various constraints and relationships into databases. And we also present the way to store, manage, and use the knowledges and data related to ATC using the model. Finally, we propose an implementing method for ATC aiding system using our knowledge- processible database system.

치질을 투과한 조사광에 의한 복합레진 중합시 치질의 두께, 광세기 및 조사 시간이 복합레진의 표면 경도에 미치는 영향

조수경,김동준,황윤찬,오원만,황인남 大韓齒科保存學會 2005 Restorative Dentistry & Endodontics Vol.30 No.2

본 연구에서는 치질을 투과한 광에너지량을 측정하고 치질을 투과한 광에너지에 의한 광중합 복합레진의 중합 정도를 표면 경도를 측정하여 분석하였다. 광조사기로는 할로겐 광원을 사용하는 Optilux 501 (Demetron, USA)을 사용하였으며, 중합용 light guide는 840 mW/cm²의 광세기를 갖는 직경 12 mm의 light guide와 1100 nW/cm²의 광세기를 갖는 직경 7 mm의 Turbo light guide를 사용하였다. 광원을 투과시킬 치질은 건전한 상악 중절치의 순면에서부터 법랑질과 상아질을 포함하도록 0.7x0.7cm 의 크기로 두께 1.0 mm와 2.0 mm의 치아 절편을 준비하였다. 직경 5 mm, 두께 2 mm의 주형에 Al 색상의 광중합 복합레진(Charisma, Kulzer, Germany)을 충전하고 각 군에 주어진 조건에 따라 광중합하였다. 시편은 크게 치질의 두께에 따라 (대조군, 1 mm, 2 mm) 3개의 군으로 나누었으며, 각 군은 다시 light guide의 종류와 광조사 시간에 따라 4개의 군으로 나누었다. 제작된 시편은 미세경도측정기를 이용해 광조사면의 비커스 경도를 측정한 결과, 2 mm 치질군과 대조군의 Turbo-light guide으로 40초 동안 중합한 시편이 가장 높은 표면 경도값을 보였으며, 2 mm 치질군에서 light guide의 종류에 상관없이 20초 동안 중합한 시편들이 가장 낮은 표면 경도값을 보였다 (p < 0.05). 이상의 결과는 1 mm 이하와 같은 얇은 치질을 투과하여 복합레진을 중합하는 경우 광세기와 광조사 시간을 증가시키면 중합 정도도 증가하나, 특정 두께 이상의 치질을 투과 시 광세기나 광조사 시간을 증가시키더라도 중합 정도의 증가는 기대하기 어렵다는 것을 시사한다. In this study we measured the amount of light energy that was projected through the tooth material and analyzed the degree of polymerization by measuring the surface hardness of composites. For polymerization, Optilux 501 (Demetron, USA) with two types of light guide was used: a 12 mm diameter light guide with 840 nW/cm² light intensity and a 7 mm diameter turbo light guide with 1100 nW/cm². Specimens were divided into three groups according to thickness of penetrating tooth (1 mm, 2 mm, 0 mm). Each group was further divided into four subgroups according to type of light guide and curing time (20 seconds, 40 seconds). Vickers' hardness was measured by using a microhardness tester. In 0 mm and 1 mm penetrating tooth group, which were polymerized by a turbo light guide for 40 seconds, showed the highest hardness values. The specimens from 2 mm penetrating tooth group, which were polymerized for 20 seconds, demonstrated the lowest hardness regardless of the types of light guides (p < 0.05). The results of this study suggest that, when projecting tooth material over a specified thickness, the increase of polymerization will be limited even if light intensity or curing time is increased.

이방향성 형상기억합금을 이용한 공동 주택용 방화 댐퍼 설계 연구

황성태,이찬희,장진수,변창수,히식수렝,이상욱 순천향대학교 산업기술연구소 2022 순천향 산업기술연구소논문집 Vol.28 No.2

The purpose of this paper is to redesign, compare, and study using bi-directional shape memory alloy spring to compensate for the shortcomings of the existing fire damper performance. Through the spring constant measurement experiment, using the difference in force between the coil spring and the shape memory alloy spring, the damper closes when the set temperature is reached, and opens again when the temperature is lowered. In addition, the internal structure was redesigned through smoke leakage experiments. As a result, semi-permanent usable dampers were modeled.

수리된 복합레진 수복물의 전달결합강도 연구

최수영,정선와,황윤찬,김선호,윤창,오원만,황인남 大韓齒科保存學會 2002 Restorative Dentistry & Endodontics Vol.27 No.6

This study was performed to evaluate the interfacial shear bond strength of base (direct and indirect) and repair composites with aging and surface treatment methods. Direct composites resin specimens (Charisma®, Heraeus Kulzer, Germany) were aged for 5 min, 1 hour, 24 hours, and 1 week in 37℃ distilled water before surface treatment, and then divided into five groups: Group 1, grinding; Group 2, grinding and application of bonding agent; Group 3, grinding, etching with 37% phosphoric acid for 30sec, and application of bonding agent; Group 4, grinding, etching with 37% phosphoric acid for 30sec, silane treatment, and application of bonding agent; Group 5, grinding, etching with 4% hydrofluoric acid for 30sec, silane treatment, and application of bonding agent. Indirect composite resin specimens (Artglass®, Heraeus Kulzer, Germany) were aged for 1 week in 37℃ distilled water and divided into seven groups: Group 1 - Group 5, equal to Charisma specimens; Group 6, grinding, etching 37% phosphoric acid for 60sec, silane treatment, and application of bonding agent; Group 7, grinding, etching with 4% hydrofluoric acid for 60 sec, silane treatment, and application of bonding agent. The repair material(Charisma®) was then added on the center of the surface (5mm in diameter, 5mm in height). The shear bond strength was tested and the data was analyzed using one-way ANOVA and the Student-Newman-Keuls test. The following conclusions were drawn. 1. The shear bond strength of Charisma® specimens aged for 1 hour was significantly higher in Group 2 and Group 5 than in Group 1 (p<0.05), and that of Charisma® specimens aged for 1 week was significantly higher in Group 3 and Group 5 than in Group 1 (p<0.05). No significant difference was found in the bond strength of specimens aged for 5 min and 24 hours. 2. In Group 2 of the Charisma® specimens, there was significant difference between the bond strength of 24 hours and that of 1 week (p<0.05). 3. In Group 4 of the Charisma® specimens, the shear bond strength of specimens aged for 24 hours was significantly higher than the others(p<0.05). 4. There was no significant diiference between the shear bond strength of the Artglass® specimens. 5. Most of the Charisma® specimens showed cohesive fractures. Artglass® specimens that were etched with acid(phosphoric or hydrofluoric) for 30 sec showed more cohesive fractures.

지역별 건설업 인력수급 현황 분석에 관한 연구

전찬민,전용일,황찬수,박태근 대한건축학회 2003 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.23 No.2

In currency crisis(IMF relief loan), the construction industry has prepared a foundation for existence by taking such desperate countermeasure as reducing a lot of construction companies and readjusting the their structure. Even though a number of employee of construction industry came to a million in 1996, it reduced to 980 thousand in 1997 and 710 thousand in 1998. After 1998, there was the trend about reducing a number of employee every year. The final goals of this study have inquired into the current situation of manpower supply and demand per region, compared and analyzed the circumstance of manpower supply and demand, and utilized references in decision-making between construction companies and students.

사파이어의 Fe³^+ -center에 대한 ESR 연구

한찬수,황인섭 순천향대학교 기초과학연구소 2000 순천향자연과학연구 논문집 Vol.6 No.2

An electron spin resonance study of the Fe3+-center in Sapphire has been carried out at room temperature employing the JEOL JE-TE100 X-band spectrometer. The spin Hamiltonian parameters of the center are determined from the measurements using the least-squares method. The sample was prepared from a synthetic corundum doped with iron and titanium, which was grown in the Korean Research Institute of Chemical Technology in Taedok Science Town. It is found that the c-axis is made an angle of about 63˚ with the growing axis of the crystal. All 190 experimental resonance points are used to fit the ESR parameters, the data are well consistent with our calculations with the parameters. There are still unidentified ESR signals in the sample.

도시특성을 고려한 교통유발계수 산정에 관한 연구 : 대전시를 중심으로 In the City of Daejeon

김명수,전찬용,황현종 한밭대학교 2004 한밭대학교 논문집 Vol.21 No.-

The biggest problem in urban transport is congestion. The purpose of this study is to understand "Electronic Road Pricing System, which is one of the traffic demand control plan for relieving such a traffic congestion, and look for the plans to improve it. For this, traffic inducement coefficient was selected, which shows the regional characteristic of Daejeon through investigation on each facility. As one can see from the investigated inducement coefficient, the same type of facilities show different characteristics. Also, it is thought that per unit burden charge that has been maintained for over 20 years should be raised relevantly in consideration to inflation. Also, it is thought that several ways have to be sought for the facility owners' active participation in the traffic volume reduction program. Studies like this research would bring the following items as their effect; Relieve traffic congestion(partly) and reduce the passage time. Personal benefits following fuel cost etc. Socio-economic effect following logistics cost and environmental pollutants etc.