낮은 Pr수를 갖는 순수 물질에서의 진동대류에 관한 수치 해석

이동원,현명택,홍남호 濟州大學校 産業技術硏究所 1997 산업기술연구소논문집 Vol.8 No.1

Numerical study was investigated to the transient natural convection in a square cavity. The cavity is filled with the pure substance of a low Prandtl number and the vertical walls are constantly maintained different temperature. while the horizontal boundaries are adiabatic. A control volume approach with a central difference scheme is used to formulate the finite difference equations. The results were presented transient Nusselt number, stream function and temperature distribution. It was found that the flow pattern and heat transfer exhibit time-periodic oscillation at various conditions. The average Nusselt number. the amplitude and the frequency of oscillation increases as the Rayleigh number is increased. The increment of Prandtl number makes that the amplitude and the frequency of oscillation reduced, and average Nusselt number increased.

대전·충남지역 와병노인의 실태에 관한 연구

이동배,심운택,이태용,오장균,정성훈 충남대학교 의과대학 지역사회의학연구소 1991 충남의대잡지 Vol.18 No.1

This study was conducted to investigate the prevalence rate and the relationship between causative diseases and self-help abilities in bed ridden patients of the elderly. The study group was composed of 1.568 peoples aged 65 or more, living in Taejeon city and Chungnam provincial area. The results obtained were as follows : 1. The prevalence rate of bed ridden patients were 5.7% in male, and 4.3% in female. The rates revealed increasing basis with the ages. 2. The prevalence rate was higher in city area with 6.1% than inland and seaside area with 4.3%, 3.7% respectively. 3. The mean age of bed ridden patients were 75.9 years in male. 78. 0 years in female. The rates were variable with residential area. As the cause of bed ridden patients the cerebrovascular disease was higher in urban than rural area. 4. The mean age of causative diseases was the highest in contusion and fracture with 82.8 years. The period of bed ridding was the highest in muscular disease and arthropathy with 60.2 monthes. 5. The average score of activity of daily living was the highest in muscular disease and arthropathy and followed by respiratory disease, other disease, senility, cerebrovascular disease, contusion and fracture with decreasing basis. But most bed ridden patients did the activity of daily living similar to those of normal persons. 6. The causative diseases were diagnosed mainly in general hospital, hospital. and herb medicine. but muscular disease and senility were in self-diagnosed. 7. The helper of bed ridden patients were mainly wives or daughters in law.

콩 종간교잡에서 주요형질의 유전분석

이정동,권택화,조호영,황영현 慶北大學校農業科學技術硏究所 2002 慶北大農學誌 Vol.20 No.-

재배종과 야생종의 인공교잡 분리세대에서 주요형질들의 변이와 유전력을 조사하여 야생종을 이용한 콩 품종육성의 기초자료를 얻고자 수행한 결과를 요약하면 다음과 같다. 두 인공교배의 F_2 집단에서 100립중을 제외한 나머지 조사 형질들은 초원분리를 보였다. F_1과 F_2의 평균 개화일수는 양친의 중간정도로 정규 분포를 보였다. 백립중의 F_1 평균은 은하콩, 소백나물콩 두 조합 각각6.5, 5.7g으로 소립종 쪽으로 치우친 정규분포를 보였다. F_2의 평균수량은 양친의 중간정도이었다. F_1의 덩굴성은 두 조합 각각 6.4, 6.6이었으며 F_2 평균은 은하콩 조합이 6.0으로 덩굴성 쪽으로 치우쳐 덩굴성이 부분적인 우성으로 보였으나, 소백나물콩 조합에서는 4.6으로 은하콩과는 다른 결과를 보였다. 경장, 개회일수, 개체당 협수, 수량, 도복, 덩굴성 등은 높은 광의의 유전력을 보였으며 100립중은 협의의 유전력이 은하콩 조합에서 52.3%, 소백나물콩 조합에서 65.6%로 평가되어 초기세대에서의 선발이 가능한 것으로 나타났다. This study was conducted to obtain the information of varietal development using wild soybean through investigation of variation and heredity of major agronomic characters in F_2 generation of interspecific cross between Glycine max and G. soja. In segregating populations of two crosses, all characters observed except 100-seed weight showed transgressive segregation. Days to flowering showed normal distribution; mean days to flowering in F_1 and F_2 was approximately mean of parent. Mean of F_1 for 100-seed weight was 6.2g and 5.7g for Eunhakong/KLG10084 and Sobaegnamulkong/KLG10084, respectively, which were somewhat skewed distribution to small seeded parent. Mean of F_2 was about mean of two parents. Degree of vine was 6.4 and 5.7 in F_1 for two crosses but it was 6.0 in F_2 for Eunhakong/KLG10084, which revealed the degree of vine as partial dominance while 4.6 for Sobasgnamulkong/KLG10084, somewhat different results from the previous cross. Broad-sense heritability(h^2B) for plant height, days to flowering, pods per plant, seed yield, and degree of vine was comparatively high and narrow-sense heritability(h^2N) for 100-seed weight which is the most important character in the development of small seed-size sprout soybean was 52.3% and 65.6% for Eunhakong/KLG10084 and Sobaegnamulkong/KLG10084, respectively, which indicated that selection for the character in early generation was possible.

후방순환계 뇌동맥류의 임상분석

임동준,이훈갑,정흥섭,김봉룡,권택현,이기찬,서중근 대한신경외과학회 1998 Journal of Korean neurosurgical society Vol.27 No.11

대구지역 산업연관모형에 의한 산업구조분석 : 섬유산업과 성장 유망산업을 중심으로

이춘근,여택동,김영재 한국경상학회, 한국국민경제학회 2003 경제연구 Vol.21 No.4

본 연구는 한국은행에서 작성한 전국 산업연관표를 연구목적에 따라 재분류 통합하여 비조사법에 의해 대구지역 산업연관모형을 작성하고, 이를 토대로 지역산업의 산업연관구조를 분석하고 대구지역에 대한 산업정책적 시사점을 도출하고자 한다. 특히 본 연구에서는 대구지역의 주요 전통산업이 섬유산업이며 그 중에서도 폴리에스터 직물제조가 주종을 이루고 있으므로, 섬유산업을 4개 부문(방적, 직조 및 섬유가공업, 편조업, 의복 및 장신품, 기타 섬유제품)으로 세분하여 대구지역 산업연관표를 작성하고 이를 이용하여 지역산업의 연관구조를 분석하고자 한다. 그리고 대구지역 산업연관모형을 이용한 산업구조분석 결과에 따라 대구지역 지역 전통산업인 섬유산업과 성장유망산업에 관한 산업정책적인 함의를 제시하고자 한다. 특히 본 연구에서는 대구지역의 성장유망산업을 선정함에 있어 입지계수법, 지역 산업연관모형과 같은 지역경제 분석기법을 이용하여 분석한 결과를 반영하여 검토하고자 한다. This paper analyzes the industrial structure in Daegu area. employing the regional input-output model. First, this paper explores the current situation of the regional economy and industrial structure in Daegu and attempts to examine the textile industry which has been a key industry in Daegu region. Second, this paper employs the input-output model to show the linkage effects of both forward and backward directions in the whole industry of Daegu region. Particularly, this paper analyzes the structure of Daegu's textile industry. while considering more categorized sub-divisions of the textile industry in order to investigate the structure of that industry. Lastly, this paper intends to provide the industrial policy implications for the local government as well as the central government. Moreover, the current paper intends to present some fruitful policy implications for the Milan Project that would help enhance the international competitiveness of the textile and apparel industry and thus revive the regional economy in Daegu.

이부성형술에서 강선 고정술과 소강판 고정술간의 안정성에 관한 임상적 연구

이은택,김수남,민승기,이동근,송종민 대한악안면성형재건외과학회 2002 Maxillofacial Plastic Reconstructive Surgery Vol.24 No.3

Performing genioplasty for greater stability of the changed chin position, incision, dissection, osteotomy design and fixation are important technical considerations. Basically, wire osteosynthesis method has been used in genioplasty, but plate/screw osteosynthesis has been introduced in rigid fixation. The purpose of this study is that comparison of stability between wire and plate/screw osteosynthesis in genioplasty. In this study, the genioplasty groups were divided into three groups ; advanced genioplasty group, reduction genioplasty group, advanced with reduction genioplasty group. In wire osteosynthesis groups, there were 15patients who had advanced genioplasty, 13patients who had reduction genioplasty, and 12patients who had advanced with reduction genioplasty. In plate/screw osteosynthesis groups, there were 15patients who had advanced genioplasty, 13patients who had reduction genioplasty, and 13patients who had advnaced with reduction genioplasty. Lateral cephalograms ; pre- and postoperatively, postoperatively 1months, and at the latest follow-up(>6months); were analyzed by linear measurement to evaluate changes in position(hard tissue B, Pogonion point) and compare relapse between both groups.

고기능성 미립 실리카 제조

이재장,노범식,김동수,장광택 강원대학교 부설 석재복합신소재 제품연구센터 2000 석재연 논문집 Vol.5 No.-

본 연구에서는 attrition mill을 활용하여 분쇄시 발생하는 오염물질을 방지하고 고분자 유기물질의 첨가로 평균 입도 2-3㎛의 미립 실리카 분체에 가능성을 부여하여 규석 관련 첨단산업용 고부가가치 상품을 개발하고자 하였다. 실험결과 용기 내부의 코팅재에 따른 미립화 효율은 세라믹 > 텅스텐 카바이드 > 스테인레스 > 포리우레탄 > 테프론의 순이었으며 오염방지 효과는 세라믹 > 폴리우레탄 > 텅스텐 카바이드 > 테프론 > 스테인레스의 순이었다. 고분자 유기물질의 첨가에 의해 분쇄효율이 증가하였으며, 첨가제의 일부가 표면에 코팅되어 원관의 백색도 85에서 92까지 상승되었다. 형상 조절 실험 및 백색도 향상 실험결과 첨가에에 의한 분쇄 산물은 원광보다 구형에 가까운 것을 알 수가 있었다. This study focused on manufacture of the high value-added products for a high-technology industry related to silica. The silica fines less than 3㎛ was manufactured using laboratory attrition mills with various coated liner and analysed the pollutions added from the grinding test. Ground particle's shape was investigated by adding polymer. In the grinding test, coated material of cylinder affects size reduction rate by order of ceramic, tungsten carbide, stainless steel, polyurethane, teflon. In contamination tests the coated liner affects in order of stainless steel, teflon, tungsten carbide, polyurethane, ceramic. It was found also that the result of additive test showed an instant effects of grinding and whiteness.

상악 제3대구치 발거후 발생한 광범위한 피하기종

이은택,민승기,오승환,이동근 大韓顎顔面成形再建外科學會 2003 Maxillofacial Plastic Reconstructive Surgery Vol.25 No.1

Subcutaneous air emphysema is a relatively uncommon phenomenon. It has been reported in both the medical and dental literature following such various procedures as rectal biopsy, nasogastric intubation, radical neck dissection, tonsillectomy, adenoidectomy, root canal treatment, dental restoration and extraction of maxillary and mandibular teeth. The most common cause involves extraction of mandibular third molar. Subcutaneous emphysema of the head, neck and thorax is a swelling caused by introduction of air into the space of the connective tissue. The clinical signs are local swelling, tenting of the skin, and crepitation on palpation. In extreme casesk, air has been reported to pass through the masticatory space into the parapharyngeal and retropharyngeal space, and penetrate into the mediastinum. If the inflowing air contains bacteria, serious infection may ensue. The first case of subcutaneous emphysema associated with a dental procedure was first reported in 1900. This emphysema is a often limited only to the spaces of head and neck, but also can involve deeper structure. This case is diffuse subcutaneous emphysema following maxillary third molar extraction with a high-speed drill.

이질균의 병원성과 수종의 염색체 흡착능과의 상관성

이경민,설성용,조동택 慶北大學校 醫科大學 1991 慶北醫大誌 Vol.32 No.1

To study the correlation between virulence and dye binding of Shigella, 4 invasive strains and 6 non-invasive mutants of S. flexneri to HeLa cell were subjected to investigate the binding ability to congo red, basic fuchsin, safranin and crystal violet in both agar plate and solution. All virulent strains were pigmented on the agar plate containing dyes and some of avirulent mutants also pigmented. Few strains of avirulent mutants showed different dye binding by the concentration of dyes. Dye binding in solution, virulent strains were more binding to the dye than avirulent mutants, but there was no significant statistical difference. Longer the incubation time, more take up the amounts of dyes. But, 1 hour incubated strains were less binding to the dye than 24 hour incubated strains in solution containing crystal violet. There were not always correlation between agar plate and solution in degree of dye binding. To study the correlation between virulence and plasmid carriage, electrophoresis of plasmid DNA was carried out. Four invasive strains of S. flexneri harbored 140 megadalton (Mdal) plasmids and all non-invasive mutants of S. flexneri harbored plasmids between 57 and 95 Mdal, instead of 140 Mdal.

미세 유로에서의 유체 혼합에 대한 수치해석

이동원,현명택,김민찬 제주대학교 공과대학 첨단기술연구소 2004 尖端技術硏究所論文集 Vol.15 No.1

Numerical investigations have been made to study the fluid mixing process in the micro channel. CFD-ACE program was used for the fluid flow in the micro channel. In a straight channel, it takes long time to mix up two fluids because the fluids mixing processes is mainly dependent on the diffusion, while two fluids mix well due to chaotic advection in a two dimensional serpentine micro channel. in the three dimensional analysis of serpentine micro channel, the apparently different effect in fluid mixing processes cannot be found comparing with two dimensional micro channel. Two dimensional serpentine micro channel is recommended as a passive mixer.