http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
지능형 주거 공간을 위한 24시간 연속적인 건강 모니터링 시스템 구현
오승환,이희영 전남대학교 전자통신기술연구소 2001 전자통신기술논문지 Vol.4 No.1
This paper presents a wireless potable telemetry healthcare monitoring system with the characteristics of small size (42mmx75mmx15mm) and low power consumption (90mw) for the elderly and the disabled. The healthcare system consists of a measurement device, a diagnosis S/W and a user interface S/W. The measurement device is designed according to the international specifications of the recommendation of AAMI (Association for the Advancement of Medical Instrumentation). The measurement device has the functions that adjust gain and cut-off frequency to acquire various bio-signals such as ECG, EMG and EEG. It has wireless communication using Bluetooth to send a data between a host computer and other device.
오승환,임현민,이동희,서동혁,김원진,김륜나,김우병,Oh, Seung-Hwan,Yim, Hyeonmin,Lee, Donghee,Seo, Dong Hyeok,Kim, Won Jin,Kim, Ryun Na,Kim, Woo-Byoung 한국재료학회 2022 한국재료학회지 Vol.32 No.9
In this study, surface roughness and interfacial defect characteristics were analyzed after forming a high-k oxide film on the surface of a prime wafer and a test wafer, to study the possibility of improving the quality of the test wafer. As a result of checking the roughness, the deviation in the test after raising the oxide film was 0.1 nm, which was twice as large as that of the Prime. As a result of current-voltage analysis, Prime after PMA was 1.07 × 10 A/cm<sup>2</sup> and Test was 5.61 × 10 A/cm<sup>2</sup>, which was about 5 times lower than Prime. As a result of analyzing the defects inside the oxide film using the capacitance-voltage characteristic, before PMA Prime showed a higher electrical defect of 0.85 × 10<sup>12</sup> cm<sup>-2</sup> in slow state density and 0.41 × 10<sup>13</sup> cm<sup>-2</sup> in fixed oxide charge. However, after PMA, it was confirmed that Prime had a lower defect of 4.79 × 10<sup>11</sup> cm<sup>-2</sup> in slow state density and 1.33 × 10<sup>12</sup> cm<sup>-2</sup> in fixed oxide charge. The above results confirm the difference in surface roughness and defects between the Test and Prime wafer.
오승환 한국사회복지교육협의회 2005 한국사회복지교육 Vol.1 No.2
본 연구는 사회복지실습만족도 결정요인에 관한 연구이다. 사회복지실습이 매우 중요함에도 불구하고 사회복지실습교육의 효과나 실습만족도에 대한 연구는 매우 부족하다. 이에 본 연구에서는 학부생의 사회복지실습만족도에 영향을 미치는 요인을 발견하기 위하여 사회복지실습과목을 이수한 사회복지전공 학부생 274명을 조사하였다. 분석결과 실습생의 개인적 특성에서는 연령이, 학교특성에서는 희망기관 배정여부, 사전교육여부, 학교비용지원 여부 등이, 수퍼비전 특성에서는 수퍼비전의 교육적 기능과 지지적 기능이, 그리고 실습주체 특성에서는 학교와 기관과의 연계, 기관의 역할, 학생의 역할 등이 실습만족도에 영향을 미치고 있는 것으로 나타났다. 이러한 결과를 바탕으로 효과적인 사회복지현장실습을 위한 실천적인 함의를 제시하였다.