Brief introduction of Butterfly(Lepidoptera) from Myanmar

Ja Lang LIM,Jinyoung PARK,Ik Je CHOI,Yong Kyun OH,Eui Seok JEONG,Dong Pyeo LYU,U Pho Cho,Khin Mar Myint,Khin Mar Yi,Jong Kyun PARK 한국응용곤충학회 2013 한국응용곤충학회 학술대회논문집 Vol.2013 No.04

Myanmar is located in the south-east Asia peninsular and it is flanked by five neighboring states: Bangladesh, India, China, Laos and Thailand. It is located 10~22 degree north latitude, to 92~101 degrees east longitude. Myanmar has a tropical climate with three seasons in Myanmar. Hot season (March through April), rainy season (May through October) and the cool season (November through February). The coastal regions can get very hot and humid, especially before the rainy season. Myanmar has a monsoon season from May to October when there are heavy rains and often flooding. The investigation was carried out during the dry season(2013) in Nat Ma Taung National Park and Popa Mountain Park. Popa Mountain Park is located in Kyawpadaung Township, Myinchan district, Mandaly Division. The area is 49.63 square miles. Its coordinates are 29°31'60" N and 27°43'60" E. Nat Ma Taung National Park, Myanmar treasure is in Mindut District of Chin State and its area of 279 square miles. It is the third highest mountain in Myanmar with the height of 10,500 feet. Its coordinates are 21°14'00" N and 93°54'00" E. As the result, butterflies(Lepidoptera) collected in the two regions were about 60 species of 7 familys. Collecting dates, expedition activities, photo of main specimen and information of Myanmar were provided.

한국산 길쭉먼지벌레족의 수리분류(Ⅱ)

朴鐘均,權容正 慶北大學校農業科學技術硏究所 1996 慶北大農學誌 Vol.14 No.-

韓國産 길쭉먼지벌레族을 대상으로 "NC" 값을 인정하지 않은 상태에서 定性的 形態形質을 根據로 表現論的 數理分類方式을 利用한 群分析을 실시하였다. 그 結果, 비록 일부 種에서는 傳統分類 結果와 다소 一致하지 않은 경우도 있었으나 대부분 經驗的 分類와 類似한 傾向을 나타내었다. 그리고 대부분 種들이 期待한 屬 또는 亞屬내에 分布하였다. A numerical taxonomy based on the phenetic characters of 59 Korean Pterostichini species is conducted to determine the effect on the assessment of the 7 different methods combined by 3 similarity or dissimilarity coefficients. using 87 morphological multistate characters.

외과적 보조의 급속상악확장술 : 치험 5예 REPORT OF 5 CASES

박충열,이용욱,송종운,김영운,박홍주,오희균,유선열,이기현,황현식 대한악안면성형재건외과학회 2002 Maxillofacial Plastic Reconstructive Surgery Vol.24 No.1

Five adults (3 cases of bilateral posterior crossbite, 2 cases of unilateral posterior crossbite) with intermaxillary discrepancy of over 5㎜ due to maxillary transverse deficiency were treated by surgically assisted rapid maxillary expansion (SARME). Bilateral maxillary horizontal osteotomies, osteotomies of pterygomaxillary junction and anterior lateral nasal wall, ans anterior palatal osteotomy were performed in 4 cases, and unilateral osteotomies in 1case, followed by palatal expansion with tooth-borne orthopedic applicance. No significant complication was observed. The mean palatal expansion was 7.2㎜ (5.8∼10.0㎜) in the maxillary first molar region. During the mean follow-up period of 4 years (5 months∼8 years 7 months), no recurrence of crossbite was observed in all cases. The SARME seemed to be a simple, stable, and reliable procedure for achieving a permanent increase of over 5㎜ in skeletal maxillary transverse width of adults.

前腕部 經穴 取穴에서 骨度分寸法과 一夫法의 比較 硏究

박히준,채윤병,차웅석,박종배,이혜정,이향숙,인창식,고형균,김수영,최일환,김강식,문정배,배기태,유경환,육근영,정병주,손인철,임사비나 WHO COLLABORATING CENTRE FOR TRADITIONAL MEDICINE 2004 東西醫學硏究所 論文集 Vol.2004 No.-

Background : The cun measurement System, an essential and convenient method in locating acupoints, has been widely used in the practice of acupuncture. However, traditional cun measurement has been criticized for its lack of reliability. Objectives : The purposes of this study are to determine if one cun measured by the directional methods have a consistency with that of proportional methods and to investigate which factors are related with these differences, especially in forearm. Methods : The distance between the elbow crease and the wrist crease of forearm was compared to a reference value of one cun obtained by the directional method. In this method, one cun is one third of the distance between index finger and Small finger of a subject, measured at proximal interphalangeal joint. In addition, to investigate the factors influencing the differences between these two methods, we measured the height and body weight and calculated body mass index (BMI). Finally we analyzed the factors correlated with these lengths by linear regression test. Results : The results showed that one cun obtained by the directional methods were significantly different from one cun by the proportional methods in forearm. It was demonstrated that the length acquired with the directional method was more correlated with body weight and body mass index, while the length obtained by the proportional method was more correlated with the height.

일부 부인과 양성 질환자의 지방조직 및 혈청의 PCBs와 DDE 농도

박성균,이강숙,노영만,구정완,민선영,한진구,고원경,김미란,정재근,이종승,김진홍 大韓産業醫學會 2000 대한직업환경의학회지 Vol.12 No.1

목적 : 본 연구는 지방조직과 혈청의 PCBs와 DDE 농도를 측정하고, 이에 영향을 미치는 것으로 알려진 요인들과의 관련성을 평가하고자 하였다. 방법 : 유방암, 자궁내막증 등 유기염소계 화합물의 영향이 있는 것으로 알려진 호르몬 관련 질병을 제외한 부인과 환자 52명을 대상으로 지방조직과 혈청을 분석하였으며, 설문조사를 통하여 연령, 교육수준, 직업, 비만도, 흡연과 음주, 출산력, 수유력등을 조사하였다. 지방조직과 혈청의 PCBs와 DDE 농도는 가스크로마토그래피를 사용하여 측정하였다. 결과 : 지방조직의 경우, 13개 PCBs congeners 농도의 합은 중앙값이 48.29 ng/g, 기하평균값이 56.78 ng/g이었고, DDE 농도는 중앙값이 142.89ng/g, 기하평균값이 117.06 ng/g이었으며, 혈청의 경우는 PCBs congeners 농도의 합은 중앙값이 4.67 ㎍/L, 기하평균값이 4.85 ㎍/L이었고, DDE 농도는 중앙값이 1.75 ㎍/L, 기하평균값이 2.09 ㎍/L로 나타났다. 지방조직과 혈청의 DDE 농도 사이는 높은 상관성을 보였으나(r²=0.310, p=0,0002), PCBs는 상관성이 약한 것으로 나타났다(r²=0.029, p=0.2582). 영향요인을 범주화한 후 로그변환 시킨 지방조직과 혈청의 PCBs, DDE 평균의 차이를 분석한 결과, 지방조직의 DDE만이 출산자녀수(p=0.015), 초산연령 (p=0.014), 비만지수(p=0.035)와 연관성이 발견되었다 다중회귀분석의 결과 지방조직의 DDE는 출산자녀수가 적을수록, 초산연령이 늦을수록 증가하는 경향을 보였다. 결론 : 출산자녀수와 초산연령, 비만도가 지방조직의 DDE와 관련성을 보였으며, 또한 유기염소계 화합물의 장기간의 노출에 의한 영향을 평가하는데 있어서 혈청보다 지방조직이 더 유용한 생물지표임을 알 수 있었다. Objectives : This study was purposed to determine the levels of PCBs and DDE in adipose tissue and serum and to evaluate the relations with factors affecting these levels. Methods : We analyzed adipose tissues and sera from 52 gynecologic benign disease patients aged 27-78 years, except hormonal diseases such as breast cancer and endometriosis. We also surveyed age, education, occupation, body mass index (BMI), smoking, drinking, number of children, and duration of breastfeeding by questionnaires. Tissue and serum levels of PCBs and DDE were measured using gas chromatography. Results : The median and geometric mean levels of PCBs were 48.29 ng/g, 56.78 ng/g for adipose tissue and 4.67 ㎍/L, 4.85 ㎍/L for serum, and those of DDE were 142.89 ng/g, 117.06 ng/g for adipose tissue and 1.75 ㎍/L, 2.09 ㎍/L for serum, respectively. Adipose tissue and serum levels for DDE showed high correlation (r²=0.310, p=0.0002), but those of PCBs didn't (r²=0.029, p=0.2582). In analyses of the differences of the means of log transformed adipose tissue and serum PCBs and DDE levels for groups of potential covariates, only adipose tissue DDE levels were significantly associated with number of children (p=0.015), age at first birth (p=0.074) and BMI (p=0.035). In multiple regression analysis, adipose tissue DDE levels were significantly increased with decreasing number of children and increasing age at first birth. Conclusions : This study suggested that parity and adiposity were associated with levels of DDE in adipose tissue, and adipose tissue is a better biomarker than serum for evaluating the long-term exposure of organochlorines.

대학의 교수학습 개발에 대한 요구분석 연구 : 동국대학교 교수집단을 중심으로 focusing on Faculties of the Dongguk University

박명희,김성훈,박명숙,이중권,박종호,이성림 동국대학교 교육연구원 2005 교육문제연구 Vol.16 No.-

본 연구의 목적은 동국대학교의 교수들이 수행하고 있는 교수학습 방식을 파악하고 각 방법들의 효과성을 교수들이 어떻게 인식하고 있는지를 알아 보고자 하였으며 창의적 교수학습방법개발에 대한 교수들의 요구를 파악하여 교수학습개발센터의 프로그램개발을 위한 기초자료로 삼고자 하였다. 수업방식에 있어서 전공, 교양을 막론하고 대부분이 강의식 수업방식이 높았으며(80.9%, 86%), 발표식, 토론식이 (14%, 18.6%) 실험실습 등이 그 다음으로 나타났다. 교수들은 전공과목보다는 교양수업에서 학생들의 요구에 맞는 수업 수업방식을 고려하고 있는 반면 수업방식의 효과에 대해 53%만이 효과적이라고 보고하고 있다. 교수들도 효과적인 강의방법 등 교수법에 대해 체계적으로 학습할 필요성을 느끼고 있었다. 강의 기술(교수방법)과 토론 중심 수업 방법에 대한 워크샵에 대한 요구가 가장 높게 나타났고 발표수업과 프로젝트수업 방법 등 강의식 수업 이외의 다른 수업방식에 대한 워크샵 요구도가 높았다. 그 외에 학교의 지원에 대해서는 첨단 수업 기자재 활용을 위한 보조자(조교)에 대한 요구도가 가장 높고 강의 운영을 위한 보조금, 개인별 상담 지원 순으로 요구도가 높게 나타났다. The purpose of this study was to comprehend the methods of teaching and learning carried out by the teachers of Dongguk University, and to find out how the professors found those methods effective. This research was also used to serve as a basis for the development of a more creative teaching-learning system to enhance better programs for the Professor Teaching-Learning Development Center. In teaching methods, regardless of classes for majors or for cultural enrichment, most of the courses were in the form of lectures (80.9%, 86%) followed by research and discussion (14%, 18.6%), with experiment and practical training coming in third. Although professors tend to choose a more student-oriented class method in distribution courses more than in major courses, it was reported that only 53% of the faculty claimed this class method to be effective. The faculty felt the need for professors to have more constructive learning in incorporating more effective teaching methods. The demand for professor workshops on teaching skills (teaching methods) and discussion oriented classes proved to be high, as well as the need for workshops on teaching methods other than lectures, such as research courses and project oriented class methods. Regarding other demands for university support, the demand for an assistant (assistant teacher) to help with the new technology equipment was the highest, followed by subsidies for course management and support in individual counseling.

더블T형 콘크리트 교량의 수화열에 의한 온도응력해석 및 균열발생검토

김종우,이대근,박석균 대전대학교 산업기술연구소 1998 산업기술연구소 論文集 Vol.9 No.2

The analysis of thermal stress and cracking of concrete can be characterized from a knowledge of concrete temperature at early ages, environmental conditions, and cement hydration in the mixture. Several methods have been suggested to account for those interactions. These methods are to be classified into the approximate method and the exact method. For selecting the best method, it has to be considered the demand accuracy for the estimation of concrete temperature and thermal movement in the analysis model . In this study, the exact method based on finite element method (FEM) model is used to analysis the temperature distribution and thermal behavior of concrete at early alges in double T-type girder bridge. Double T-type girder bridge is being constructed at first in Korea. But it is apprehensive thermal cracking of concrete because double T-type girder has massive structure and is constructed all over by full concrete. Therefore. thermal stress and cracking of concrete in this bridge was also investigated.

균열저감형 생석회계 바닥마감 모르타르의 배합 및 입도조건 변화에 따른 팽창 및 건조수축특성

이종열,이웅종,박석균 대전대학교 산업기술연구소 1999 산업기술연구소 論文集 Vol.10 No.2

The cement based mortar is typically used as the surface finishing material for apartment floor. By the way, the crack is easily appeared with the lapse of time in this floor mortar because of the shrinkage effect of the cement. In our country, the most popular expansive additive is hauyne(CSA) or free lime(free-CaO) system. The types of shrinkage in the surface finishing mortar is known as plastic shrinkage, dry shrinkage and autogenous shrinkage. In this study, the expansive properties of the free lime system with various size distribution is analyzed. In particular, the experiment for the expansive properties is carried out by using the soundness molds and with various humidity and dry setting conditions. In addition, the difference of dry shrinkage properties between the cement with expansive additives and OPC is investigated under different conditions of water/cement ratio and sand/cement ratio.

Effects of Pilger Rolling and Heat Treatment on Microstructure and Corrosion Resistance of Ag-electroplated 304 Stainless Steel Tubes

Hyun Park,Woo‑Jin Lee,Jae‑Han Son,Han‑Kyun Shin,Sung‑Kyu Hong,Hyo‑Jong Lee 대한금속·재료학회 2022 METALS AND MATERIALS International Vol.28 No.8

We introduce a cost-effective method that combines electroplating with metal cold working processes to manufacture compositetubes with robust corrosion resistance. First, a 3-step electroplating process was developed to form an adhesive anduniform Ag coating on the outer wall of a 304 stainless steel tube. The process consisted of a Ni-strike step for removing thepassivation layer of the initial 304 tube, Cu deposition for smoothing the surface by adding a buffer layer, and Ag deposition. To reinforce the interfacial adhesion between the electroplated layers and the 304 tube and increase the area of the Ag coating,a pilger rolling or pilger rolling + heat-treatment process was performed after the Ag electroplating process. Scanningelectron microscopy of the composite tubes after each process indicated that the as-deposited Ag coating changed fromhaving a rough to smooth surface after only pilger rolling and with additional heat treatment. Electron backscatter diffractionanalysis of the microstructures and textures of the tubes revealed that dynamic recrystallization occurred extensively duringpilger rolling, resulting in the formation of a relatively defect-free grain structure without heat treatment. Furthermore,electrochemical polarization curves determined that the Ag-coated composite tubes are superior to the uncoated 304 tubein terms of corrosion resistance under Cl−atmosphere, owing to the formation of a AgCl passivation layer during testing. Surface analysis of the composite tubes suggests that the properties of the AgCl passivation layer are related to the grainsize of the Ag coating and the density of plastic-deformation-induced defects.

公州地域 野外地質實習資料 開發 및 指導方案에 關한 硏究

禹榮均,朴鍾浩,曺龍鉉 공주대학교 사범대학 과학교육연구소 1994 과학교육연구 Vol.25 No.1

According to anaiyses of earth science curricula and textbooks for elemantary, middle and high school(Table 1∼8), it is clear that the effective learnings about the important factors in geologic part such as minerals, rocks, weathering, erosion, transportation, deposition, geologic structure, strata, fossils, geologic survey and ore deposits, can be obtained through the field work investigation. In the Kongju area, various types of igneous, sedimentary and matanmorphic rocks are distributed, so there are plenty of the various field geologic practical materials. Therefore Kongju area is the suitable place for the developments of field geologic practical courses(Figure 1). In our present school circumstance, it is difficult that the field geologic time is especially shared. Therefore it is desirable that the field geologic practical work is concurrently acted in the chance of the annual school functions such as picnic and camping. So the field geologic practical courses developed here are the adequate place for picnics and campings.