http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박양병(Yang Byung Park),장원준(Won Jun Jang),박해수(Hae Soo Park) 한국산업경영시스템학회 2011 한국산업경영시스템학회지 Vol.34 No.4
The operation of vending machine system presents a decision-making problem which consists of determining the product allocation to vending-machine storage compartments, replenishment intervals of vending machines, and vehicle routes, all of which have critical effects on system profit. Especially, it becomes more difficult to determine the operation variables optimally when demand for a product that is out-of-stock spills over to another product or is lost. In this paper, we propose a heuristic for solving the operation problem of the vending machine system and evaluate it by comparing with Yang’s algorithm on various test problems with respect to system profit via a computer simulation. The results of computational experiments show a substantial profit increase of the proposed heuristic over Yang’s algorithm. Sensitivity analysis indicates that some input variables impact the profit increase significantly.
양재춘,오희필,전재식,이호연,오헌진,정문규,박해용 충남대학교 기초과학연구소 1987 연구논문집 Vol.7 No.-
중성자와 우라늄의 핵반응에 의해 생성된 핵분열생성물의 물리적 특성을 이용하여 원자로 내의 핵연료 상태를 해석하는 모델을 개선하였다. 이 모델에서는 고체 핵연료 내에서 특정핵종의 핵분열생성물의 생성과 이것이 원자로 냉각재까지 방출되는 과정을 계산하고 추적하여 방사능농도와 결함 핵연료봉의 수를 관계짓는 방정식의 계수들을 결정한다. 핵분열생성물의 거동은 이탈(knock out)과 이동(migration) 두 부분으로 나누어 해석하였으며 트램프 우라늄의 영향을 분리할 수 있도록 하였다. 실측자료로는 가압 경수형 원자로인 고리 원자력발전소 1호기의 1차 냉각재를 분석해서 얻은 I-131과 I-133의 방사능 강도를 이용하였다. 이 실험자료와 위 방정식에서 구한 방사능 강도로부터 구한 결함 핵연료의 수는 제3주기에서 9.34±1.13개 제6주기에서 0.294±0.092개로 나타났다. An improved mothod of assessing fuel status by analyzsis of the fission product in the reactor coolant system is proposed. The release mechanism of specific fission products is established for determination of the coefficients in the equations which relate the radioactivities with the amount of detected fuel. Knock-out and migration models are employed in the formulation of the release mechanism. The influence of the tramp uranium is quantified. Sample calculations were made for KNU 1 reactor system using the I-131 and I-133 concentrations in the primary coolant. The estimated number of defected fuel pins in the third and sixth cycles appeared to be 9.34±1.13 and 0.294±0.092, respectively.
이호연,오헌진,전재식,오희필,양재춘,정문규,박해용 대한방사선 방어학회 1986 방사선방어학회지 Vol.11 No.2
중성자와 우라늄의 핵반응에 의해 생성된 핵분열생성물의 물리적 특성을 이용하여 원자로 내의 핵연료 상태를 해석하는 모델을 개선하였다. 이 모델에서는 고체 핵연료 내에서 특정핵종의 핵분열 생성물의 생성과 이것이 원자로 냉각재까지 방출되는 과정을 계산하고 추적하며 방사능농도와 결합핵연료봉의 수를 관계짓는 방정식의 계수들을 결정한다. 핵분열생성물의 거동은 이탈(knock out)과 이동(migration) 두 부분으로 나누어 해석하였으며 트램프 우라늄의 영향을 분리할 수 있도록 하였다. 실측자료로는 가압 경수형 원자로인 고리 원자력발전소 1호기의 1차 냉각제를 분석해서 얻은 I-131과 I-133의 방사능 강도를 이용하였다. 이 실험자료와 위 방정식에서 구한 방사능 강도로부터 구한 결함 핵연료의 수는 제3주기에서 9.34±1.13개 제6주기에서 0.294±0.092개로 나타났다. An improved method of assessing fuel status by analysis of the fission product in the reactor coolant system is proposed. The release mechanism of specific fission products is established for determination of the coefficients in the equations which relate the radioactivities with the amount of defected fuel. Knock-out and migration models are employed in the formulation of the release mechanism. The influence of the tramp uranium is quantified. Sample calculations were made for KNU 1 reactor system using the I-131 and I-133 concentrations in the primary coolant. The estimated number of defected fuel pins in the third and sixth cycles appeared to be 9.34±1.13 and 0.294±0.092, respectively.
Yang, Hae Jun,Yun, Hyun Do Trans Tech Publications, Ltd. 2013 Advanced materials research Vol.663 No.-
<P>In this study, two reinforced concrete (RC) squat shear walls with height-to-length ratio of 0.55 and non-ductile reinforcement details are tested under reversed cyclic loading. Emphasis of the study is placed on the hysteretic behavior and cracking procedure of RC squat shear walls in accordance with the presence and absence of vertical seam on the wall panel. Two specimens had the same rectangular cross-section of 1,100 x 50mm, with wall panel heights of 600mm. To investigate the effect of vertical seams on the wall panel on the structural behavior of shear wall, one wall (CON-S) with three vertical seams with dimension of 260 x 40mm was made and the other (CON-N) was a solid wall without seams. The test results indicated that a squat shear wall with vertical seams exhibited more stable hysteretic behavior than a solid shear wall. Vertical seams on the wall panel improve the ductility and energy dissipation capacity but decrease the maximum strength of RC non-ductile squat shear wall.</P>