환경교육을 위한 웹 기반 프로젝트 학습 시스템의 설계 및 구현

전우천,정효숙,김동용,엄종진,정성모,최수경 서울교육대학교 2001 한국초등교육 Vol.12 No.2

The use of the Web (World Wide Web) has been changing roles of traditional education style. Especially, the Web can overcome time and space limitations in the traditional schools. Teachers and students are now using the Web to access vast amounts of information and resources on cyber space. Also, the learning via the Web enables both synchronous and asynchronous communication. Despite of many benefits of the Web, it may weaken students motivation due to lack of face-to-face communication. In this paper, we provide a learning model called Web Project Learning, which is based on the contructivism, to provide motivation and collaborative learning for students in the Web environment. The model is based on the Project-Based Learning model and is revised for use in the Web. The model can also encourage the participation of parents as well as students, and be applied to any subject. We implement our model and show that the model can be used for environmental education as an instance.

A2024와 SM45C 마찰용접의 열전달 해석

이상윤,고준빈,명태식,김기길,강형모 大田産業大學校 2001 한밭대학교 논문집 Vol.18 No.-

The heat transfer mechanism initiating the friction welding is examined and a transient three dimensional heat conduction model for the welding of two dissimilar cylindrical metal bars is investigated. The cylindrical metal bars are made of materials made of A2024 and SM45C. Numerical simulations of heat flow are performed using the finite volume method. Respectively, Commercial FLUENT code is used in the heat flow simulation and maximum temperature and distribution of temperature are calculated. Temperature of friction welded joining face is compared with the temperature distribution measured by experiment and numerical simulation. The maximum temperature of friction welded joining face is lower than melting point of A2024-T6 aluminum alloy using insert metal. The temperature distribution of friction welded joining face with insert metal is more uniform than that of without insert metal

접촉연소검지방식을 이용한 후막형 메탄가스센서의 제조 및 그 특성

박준식,이재석,홍성제,박효덕,신상모 경북대학교 센서기술연구소 1995 센서技術學術大會論文集 Vol.6 No.1

본 연구에서는 스크린 프린팅 기술을 이용한 병렬저항열원을 갖는 후막형 가연성 가스센서를 제조하고, 메탄가스에 대한 감도특성을 조사하였다 알루미나 기판의 양면 위에 제조된 병렬형 백금 후막발열체는 후막형 백금 저항체로 사용된 백금페이스트 온도 감지 특성과 표면 특성을 조사하여 paste A로 선정하였다. 제조된 백금 후막 발열체는 평균저항값이 1.8Ω이고, TCR값은 3685ppm/℃이었다. 제조된 백금 발열체상에 Pt과 Pd이 첨가된 촉매 페이스트를 제조하고 가지부는 Pt과 Pd가 첨가된 촉매를 스크린 프린팅하여 후막을 형성하고 열처리하여 제조하였다. 제조된 후막형 센서는 메탄가스에 대해 4.3mV/1009ppm의 감도를 보였으며, 소비전력은 2.12W이었다. We fabricated the sensors with parallel Pt heaters using screen printing process and investigated sensitivities to hydrocarbon gases. The paste A was selected as Pt paste for heater by investigated the properties of TCRs and thick film microstructures. The average resistance of parallel Pt heaters was 1.8Ω, and the best TCR obtained was 3685ppm/℃. On the top of the Pt heaters, a sensing layer added with Pt and Pd as catalyst paste was screen printed and heat treated. The sensitivity of fabricated the sensor was 4.3mV/1000ppm to methane. The power consumption of the sensors was 2.12watts

한국인 정상 성인의 하부요추 횡돌기 단면적에 대한 연구

안재성,이준규,양준영,김영모,이문종 충남대학교 의과대학 지역사회의학연구소 1999 충남의대잡지 Vol.26 No.1

A posterolateral intertransverse process fusion is generally considered to be one of the most common types of lumbar fusion and a reliable procedure. It is reported that establishment of blood supply is important for nutrition as well as for formation of new bone during bone graft healing. Since the major interosseous blood supply for vascularization of autogenous bone graft is originated from the upper and lower transverse process, the one of the transverse process can he related to rate of bony union. It can be constructed that different union rate can result from the differences in transverse process areas. In this study, the area of the transverse processes of L5 were measured in normal adult. For this purpose, Ushikata area-Curvimeter (X-PLAN 360) was used. In Results, there was no significant differences in the age, but there was differences in the gender.

5-GHz대 WLAN용 SiGe HBT MMIC 가변이득 증폭기 설계 및 제작

김상모,김창우,장승호,전승범 경희-다반 ASIC 설계교육센터 2003 경희-다반 ASIC센터 논문집 Vol.4 No.-

SiGe HBT를 이용하여 C-band WLAN용 가변이득 증폭기를 설계 및 제작하였다. 가변이득 증폭기의 회로는 선형성이 우수한 Gilbert Cell 구조를 기초로 한 이중평형형 상호 컨덕턴스 가변형 회로로 설계하였다. 5.15 ~ 5.35GHz서, 가변이득 증폭기는 9dB 최대 이득과 26dB의 최대 감쇄를 나타내어 35dB의 이득 조절 범위를 갖는다. 이득 가변 조절 감도(Gain control sensitivity)는 감쇄 영역에서 27 mV/dB고 이득을 갖는 구간에서 195mV/dB이다. 3.2 V의 동작 전압에서 소모전류는 24 ~ 34 mA이다.

만성 활동성 간염에 있어서 Ursodeoxycholic acid의 치료효과

김성록,안병철,윤영미,탁원영,곽규식,최용환,정준모 慶北大學校 醫科大學 1991 慶北醫大誌 Vol.32 No.4

The purpose of this study is to evaluate the clinical and biochemical effects of SGD-F^(R)(UDCA, Vitamin B_1, Vitamin B_2 complex) in chronic active hepatitis. Observed cases were given orally after each meal(three times a day) for 4 weeks. The results were as follows: 1. Among subjective symptoms, improvement rate showed in easy fatigability 86.7%, anorexia 68.0%, indigestion 80.0%, nausea and vomiting 72.7%, RUQ pain 83.3%. 2. Biochemical parameters such as SGOT, SGPT, showed to be improved significantly after the 4 weeks treatment.(p<0.01) 3. There was no specific side effect during the study period in all cases. In conclusion, SGD-F^(R) capsule may be safe and effective for chronic active hepatitis.

폐 섬유 보강 복합재의 제조와 마찰특성

차준용,이정민,모상영,이재달,배기서,홍영기 忠南大學校 産業技術硏究所 1996 산업기술연구논문집 Vol.11 No.2

Fiber-reinforced composite materials are used in a wide variety of applications in the advanced field of industries such as electric clutch, motor, car, space and aviation etc. It is well known that the brake lining made of fiber-reinforced composites show excellent friction and wear properties compared to the conventional asbestos brakes and also are known to have high absorption energy and excellent high temperature properties in braking. In order to endow high friction and wear stability to the commercial brake lining, the waste fiber such as cotton, PAN, PET, nylon,kevlar, glass and it's binary mixture fibers were used the fiber reinforcements. The fiber/phenolic resin system has been carried out by preform molding method. The friction tester was especially designed and prepared for evaluation of frictional properties such as friction coefficient and stability. The physical properties of fiber reinforced composites were investigated in terms of the 3-point bending strength, the properties of friction, and morphology. The results obtained from the work are as follows ; 1. The friction properties of the cotton fiber reinforced composites were similar to those of the commercial brake linings, but in the cases of reinforcement of kevlar, glass. we can improve those properties, 2. The proper amount of organic and inorganic fiber mixtures can improve the properties of friction and the mechanical properties, 3. It is more desirable to manufacture hybrid fiber reinforced composites because single cotton or synthetic fiber reinforced composites aren't improved frictional properties, and 4. On evaluating frictional properties of waste fiber reinforced composites, frictional properties of waste fiber reinforced composites are superior to commercial disc lining. Therefore we can confirm practical possibility of waste fiber reinforced disc lining.

von Willebrand's disease 1예

박치영,모성환,문철호,곽재정,김태종,전용준,박유환,정춘해 朝鮮大學校 附設 醫學硏究所 1995 The Medical Journal of Chosun University Vol.20 No.2

von Willebrand's disease (vWD) is the most common autosomal-dominant inherited disorder resulting from a quantitative or a qualitative defect of von Willebrand factor (vWF). The most diagnostic pattern is the combination of a prolonged bleeding time, a reduction in plasma vWF concentration, a parallel reduction in ristocetin cofactor activity, and reduced factor Ⅷ activity, In this case, ristocetin-induced platelet aggregation data were compatible with that of vWD. Bleeding times were prolonged over 4 minutes, vWF antigen levels were 45%. vWF ristocetin cofactor activities were 0~1% and factor Ⅷ levels were 31%, when compared to the normal control. We report the case of a family with vWD. characterized by a quantitative defect in vWF

von Willebrand's diseasee 1예

박치영,모성환,문철호,곽재정,김태종,전용준,박유환,정춘해 조선의대 1995 The Medical Journal of Chosun University Vol.20 No.2

다발성 골수종으로 이행한 단일형질세포종 1예

정재용,모성환,기장도,문철호,김창욱,전용준,박유환,정춘해,오윤경 조선의대 1995 The Medical Journal of Chosun University Vol.20 No.2