고층빌딩용 강구조물의 고온 균열에 관한 연구

원용신,석한길 三陟大學校 産業科學技術硏究所 2003 産業科學技術硏究論文集 Vol.8 No.1

Tandem SAW process with high heat input is widely used on steel fabrication industries to enhance the productivity by decreasing the melding layers on comer joint of box column. In this process the crack occurred in partial penetration joint. because of carbon contents. high cooling rate. welding groove and welding speed. Otherwise crack &d not occur in full penetration joint. because of - decreasing carbon dilution from base metal. - improving welding condition between weld surface width and weld depth. - low carbon equivalent by GMAW.

자궁근종에서 Phospholipase C 동종효소들의 발현에 관한 연구

윤혜원,류임주,김창미,심재철,서영석 대한해부학회 1995 Anatomy & Cell Biology Vol.28 No.4

중년여성의 댄스스포츠 참여형태에 따른 만족도 및 활성화 방안

원영두,김미숙 한국스포츠리서치 2004 한국 스포츠 리서치 Vol.15 No.4

This study suggested the satisfaction of middle-aged women with dance sports according to its participation type and activation methods of dance sports facilities and conducted questionnaire with total 450 middle-aged women who are participating in dance sports in G metropolitan city in order to offer the basic materials for creating efficient investment and economic profitability of dance sports facilities and data collected were analyzed with SPSS 11.0. One-way ANOVA for analyzing their frequency and satisfaction according to participation type on demographical factors and participation types and activation methods according to participation type in dance sports and multiple correlation analysis for analyzing the relationship between participation type and activation methods were conducted and the following conclusions were obtained. 1. In analysis of participation type of middle-aged women in dance sports, most of them participated in dance sports less than 3 months, frequency of participation in it a week was twice and hours of dance sports was mostly less than 1 hour, 2. In satisfaction of middle-aged women with the period and frequency of participation in dance sports, achievement factor, social factor, leisure and health factors showed statistically significant differences, but participation hours showed significant differences in social, leisure and health factors except achievement factor (p<.05). 3. Study on activation method showed that group participating in dance sports for more than 6 months emphasized the activation of facilities and group participating in dance sports for less than 3 months did that of coach, Group having the career of sports dance between 3 and B months responded program should be activated and improved, On activation of facilities and programs, groups participating in dance sports three times and four times a week had high concerns on it. 4. In correlation analysis between participation type in dance sports and activation methods, participation period and facilities, coach and program showed higher correlations and frequency of participation in dance sports showed higher correlations between coach and program activation, but there was no correlation between facility, coach and program activation according to participation hours.

남서울대학교 교직교육과정 개편 방안

허영주,김원곤,전창석,이석열 남서울대학교 2009 남서울대학교 논문집 Vol.15 No.1

The purpose of this study is to search for method that Teacher's curriculum of Namseoul University is been active. For success of this purpose, we analyze strengthening on Teacher's education of Ministry of Education & Science, and analyze Kindergarten and Middle & High School's curriculum. And we examined the present managerial conditionand the problem of Teacher's curriculum in this university. Also analyze curriculum, support system and existing facilities of other universities.According of this analysis, for acting of Teacher's curriculum through the enlargement of advance into the teaching profession, we found alternate Teacher's curriculum. Key Words : alternate, Teacher's curriculum, teaching profession, survey

열간가공에 따른 강재특성변화 연구

원용신,석한길 三陟大學校 産業科學技術硏究所 1999 産業科學技術硏究論文集 Vol.4 No.-

This paper discribes the test results on the heating and cooling temperature effects of the hot forming method in bending working of steel plate.

十二變에 대한 考察 : 六元正紀大論을 중심으로

채영진,남호현,이석모,여성원,한성규,이재원,안민식,정헌영,금경수 한국전통의학연구소 2003 한국전통의학지 Vol.13 No.1

The six kinds of natural factors(It refers to wind, cold, summer-heat, dampness, dryness and fire.) is constantly moving to maintain the balance of whole climate of one year. Four seasons are the largest mediation of whole climate of one year. The cold and the heat have the relationship of mutual intervention. The dampness and the dryness have it also. In this process they raise various climate appearance. And that various climate appearance influence the whole lives on the earth. This paper is concerned with the classification of them.

한국의 제7차 중학교 과학교육과정과 일본, 영국, 미국의 새 과학 교육과정의 비교 연구

김원숙,김영민 부산대학교 사범대학 과학교육연구소 2005 科學敎育硏究報 Vol.32 No.-

The purposes of this study are to find similarities and differences of the science curricula of a few advance countries-Japan, England, United States of America-comparing with Korean one, and to provide implications for the improvement of the Korean science curriculum. Therefore, the science curricula of Korea, Japan, England, United States(particularly New York and California states) which were gathered mainly from internet web-sites of those countries were analyzed and compared tn respect of their general formats, objectives, contents, instructional methods, and evaluation.

저가 후막 EL소자 제조 및 신뢰성 평가

강계원,김대연,이영훈,강봉석,박정현,최병호 금오공과대학교 산업기술개발연구원 2000 産業技術開發硏究 Vol.16 No.-

AC powder electroluminescence(EL) device consists of seven layers : PET substrate, transparent electrode, phosphor layer, dielectric layer, two layer metal electrodes and protective layer. Etch layer needs to control to improve electrical and optical properties. Both phosphor and dielectric layer among them is more important to increase its properties. For long-time reliability, proper choices of passivation and sealing material are essential. In this paper, influence of phosphor and dielectric layer thickness on EL performance is studied. Type of cellulos is selected as a sealing material to avoid moisture. To add two type of plasticizer to resin improves flexibility and passivation of EL devices. Through this experiments, technologies of fabrication low-cost thick film EL device can be established.

원발성 유방암에서 Sodium Iodide Symporter의 발현과 ^(99m)Tc-MIBI 유방스캔의 관계

석주원,김성장,곽희숙,이창훈,김인주,김용기,배영태,김동수 대한핵의학회 2002 핵의학 분자영상 Vol.36 No.6

목적: hNIS는 갑상선 조직 외에 다른 조직들에서도 발현된다고 알려져 있다. 유방암 세포는 그런 조직들 중에 하나이며, 그에 의한 유방암의 방사성옥소치료의 가능성이 제시되고 있다. 본 연구에서는 유방암 조직에서 hNIS의 발현정도를 알아보고, ^99mTc-MIBI 유방스캔과 hNIS의 발현 정도와의 관계를 조사하여 보았다. 대상 및 방법: 본 연구에서는 유방암으로 수술을 시행했던 56명의 환자를 대상으로 하였다. hNIS의 발현은 면역조직화학염색에 의해서 평가되었으며, 그 결과를 ^99mTc-MIBI 유방스캔의 판정 결과와 비교하였다. 결과: 전체 56명의 환자에서 hNIS의 발현율은 41.1%였다. 병리학적 진단에 의해 침윤성관상피암종이었던 49명에서의 발현율은 42.9%, 관상피내암종이었던 7명에서의 발현율은 28.6%였다. ^99mTc-MIBI 유방스캔에서 국소섭취 소견이 관찰되었던 41명에서의 hNIS의 발현율은 31.7%였다. 비정상적인 섭취 소견이 관찰되지 않았던 15명의 환자에서의 hNIS의 발현율이 의미있게 높게 관찰되었다(66.7%, p>0.05). 결론: 유방암 환자에서의 hNIS의 발현율은 그다지 높지 않았다. ^99mTc-MIBI 유방스캔에서 섭취증가 소견이 없을 때 hNIS의 발현율이 더 높았다. Purpose: Human Na^+/I- symporter (hNIS) is known to be expressed in many tissues other than thyroid gland. The breast cancer cells are one of them and the possibility of radioiodine therapy in treatment of the breast cancer may be suggested. We investigated the expression rate of hNIS and the relationship between the expression of hNIS and the finding of 99mTc-MIBI scintimammography in the breast cancer. Materials and Methods: Surgically proved 56 patients with breast cancer were the subjects of this study. The expression of hNIS were evaluated by immunohistochemistry and the results were compared to the findings of 99mTc-MIBI scintimammography. Results: Overall expression rate of hNIS was 41.1% in 56 patients. According to the pathologic diagnosis, it was 42.9% in 49 patients with invasive ductal carcinoma and 28.6% in the 7 patients with ductal carcinoma in situ. The expression rate of hNIS in the 41 cases with a focal increased uptake at he breast lesion on 99mTc-MIBI scintimammogram was 31.7%. That in the 15 cases without any abnormal uptake on the scan was significantly higher(66.7%, p<0.05). Conclusion: The expression rate of hNIS in the patients with breast cancer was not so high. The rate was higher in the patients with no increased uptake at the breast lesion on 99mTc-MIBI scintimammography. (Korean J Nucl Med 2002;36;325-32)

도재브라켓의 제거방법에 따른 법랑질표면의 주사전자현미경학적 관찰

박미숙,윤영주,김광원 대한치과교정학회 1996 대한치과교정학회지 Vol.26 No.5

도재브라켓의 제거방법에 따라 법랑질표면에 미치는 영향을 비교 평가하기 위하여 80개의 발거된 소구치를 대상으로 통법에 의해 도재브라켓을 부착시키고 일주일 후 각각 40개의 기계적 방법에 의한 제거군과 전기열전도 방법에 의한 제거군으로 구분하여 도재브라켓의 제거를 유도한 후, 그 탈락양상 및 도재브라켓과 법랑질 표면의 주사전자현미경 관찰을 시행하였으며, 전기열전도 방법에 의한 제거군을 다시 각각 10개씩 고속 tungsten carbide bur에 의한 연마군, 저속 sof-lex disc에 의한 연마군, 고속 resin polishing bur에 의한 연마군, 그리고 초음파 치속제거기에 의한 연마군으로 분류하여 잔여레진의 연마를 시행한 후, 잔여레진의 연마를 시행한 후, 잔여레진의 평가에 의해 다음과 같은 결론을 얻었다. 1) 결찰와이어 절단용 겸자를 이용한 도재브라켓의 기계적 제거시, 0.69의 평균 잔여레진 부착지수를 보임으로써 법랑질과 레진 경계부에서 파절이 가장 빈발한 양상을 보였다. 2) 전기열전도 방법을 이용한 도재브라켓의 제거시 2.19의 평균 잔여레진 부착지수를 보임으로써 브라켓과 레진 경계부에서의 파절이 가장 빈발한 양상을 보였다. 3) 기계식 방법으로 도재브라켓의 제거시, 법랑질표면의 주사현미경 관찰소견은 실험군의 7.5%에서 법랑질표면의 탈락과 패임 등의 손상을 보였다. 4) 잔여레진의 제거의 고속 resin polishing bur 사용군에서 가장 적은 잔여레진막을 보였다. The purposes of this study were to evaluate and compare the frequency of ceramic bracket fracture, frequency of enamel fracture, bond fracture site, adhesive remnant index after mechanical and electrothermal debracketing, to evaluate effectiveness of high and low speed rotary instrument and ultrasonic instrument during residual adhesive remnants removal, and to measure resin film surface(percentage) using by image analyser(Leco 300). Bond fracture site, bracket fracture, and enamel surface damage were examined by scanning electron microscope. The following results were obtained: 1. In the mechanical debracketing group, the bond failed predominantly at enamel-adhesive interface with the bulk of adhesive remaining on bracket base. 2. In the electrothermal debracketing group, the bond failed predominantly at adhesive-bracket interface with the bulk of adhesive remaining on enamel surface. 3. The most effectiveness of residual resin removal was obtained by means of the resin polishing bur and the order of scratch formation was the precedure using tungsten carbide bur, ultrasonic scaler, sof-lex disc, and polishing bur. 4. The order of the resin film surface percentage was ultrasonic scaler, tungsten carbide bur, sof-lex disc, and resin polishing bur.