Phong Shading 알고리즘을 적용한 3차원 영상을 위한 고속 그래픽스 가속기 연구

박윤옥,박종원,Park, Youn-Ok,Park, Jong-Won 한국인터넷방송통신학회 2010 한국인터넷방송통신학회 논문지 Vol.10 No.5

2차원 그래픽을 3차원 그래픽으로 변환하기 위한 삼차원 그래픽 알고리즘들은 복잡하고 다양한 기법의 사용으로 인하여 대규모의 반복 연산이 요구되고, 이로 인하여 실시간 삼차원 그래픽의 처리가 어려운 경우가 많다. 본 논문은 삼차원 그래픽 처리와 관련된 여러 가지 알고리즘 중에서 Phong Shading 알고리즘의 병렬처리 방법과 고속 하드웨어 처리를 위한 삼차원 그래픽 가속기에 관한 것으로, Park's 다중접근 기억장치와 다수의 연산기로 구성된 SIMD처리기를 사용한 삼차원 그래픽 가속기 구조를 제안하고 있으며, 제안된 가속기 구조를 HDL을 사용한 시뮬레이션을 통해 본 논문에서 제안된 삼차원 그래픽 가속기에 의해 복잡한 알고리즘을 갖은 어떠한 삼차원 그래픽 알고리즘도 병렬 처리 알고리즘을 적용하여 SIMD 가속기에 의한 실시간 처리가 가능함을 보였다. There are many algorithms for 2D to 3D graphic conversion technology which have the high complexity and large scale of iterative computation. So in this paper propose parallel algorithm and high speed graphics accelerator architecture using Park's MAMS(Multiple Access Memory System) for Phong Shading, one of many 3D algorithms. The Proposed SIMD processor architecture is simulated by HDL and simulated and got 30 times faster result. It means any kinds of 3D algorithm can make parallel algorithm and accelerated by SIMD processor with Park's MAMS for real time processing.

3차진료기관 외래약국 투약대기시간에 영향을 주는 요인

박하영,한옥연,나현오 한국의료QA학회 1994 한국의료질향상학회지 Vol.1 No.2

Background: The number of outpatients visiting large university teaching hospitals has increased drastically with the introduction of a nationwide health care insurcnce in 1989 and the improvement of the socio-economic status of the population. This resulted in long waiting times for services, parlicularly prescribed drugs, which have been patients chief complaints. Hospitals have tried to solve the problem with limited success because their approach lacked comprehansive research. The objective of this study is to investigate associations between waiting times and variables defining a total work system. Methods: Data for the outpatient pharmacy department in a tertiary care university teaching hospital located in Seoul was analyzed to achieve the study objective. Associations of pharmacy system variables -work load, work force, pharmacist work schedule, machine problems, and inventory control- with mean and 99th percentile of waiting times were examined by the hierarchical stepwise regression method. Day was a unit of the analyses. Results: The regression models explained 65.8% of variance in the mean waiting time and 61.34% in the 99th percentile of waiting times. The break-down of the printer for drug envelops, Automatic Tablet Counters (ATCs), and main compute system lasted longer than 30 minutes increased the mean for 7.7 minutes, 4.5 minutes, and 7.0 minutes, respectively and the 99th percentile for 14.8 minutes, 9.0 minutes, and 15.7 minutes, respectively. Concerning the work force, study results showed that there were significant differences in the productivity of pharmacists with work experience more than three years, one to three years, and less than one year, and showed that peak time aid work by pharmacists at job assignments other than the outpatient pharmacy, part-time pharmacists, and the installation of ATCs were effective in reducing waiting times. Finally, study findings indicated that the operational policy of work assignment and rotation schedule, supply and inventory of drugs at work tables, and readiness for undisrupted work during the work hours could have a significant effect on waiting times. Conclusion: The study results indicated that efforts to reduce waiting times for prescribed drugs should be geared toward every components of the pharmacy work system ranging from work schedule of pharmacists and supply of drugs at work tables. These findings should provide hospital managers with right directions in battling the problem.

디자인 프로세스를 적용한 환자복 개발 사례 연구

이연희;박재옥;서미아;안민영 한양대학교 2004 韓國 生活 科學 硏究 Vol.- No.24

The purpose of this project was to design a patient's uniform which gives functional and psychological satisfaction to the patients. The project was developed to follow the design process. That is, the project was based on the survey which is on dissatisfaction of exiting patient's uniform, evaluation criteria and design preference for patient's uniform. The result of the survey was reflected to the design of new patient's uniform for Hanyang University Hospital. The uniform consists of a shirt and a pair of pants. The style of the garment is comfortable box-silhouette for ease and action. The shirt has a compromised neckline of U-neckline and round-neckline. It has buttons on front for closure, a patch pocketon left side of the garment. It also has three-quarter sleeves to complement dissatisfactions on the length and the distinction of seasons. The button extension was deeply given to avoid becoming open. To give decorative accents, piping was added. The ankle-length pants aredesigned to satisfy the need for shortening the length of existing uniform pants. The waistband of the pants has both closures, a drawstring and an elastic band, to make up for the dissatisfactions on durability and slip-off problems. The colors, white, light blue, pink, and yellow, are used to give a psychological sense of security to the patients. The flower symbol of Hanyang University was used for the textile surface design. Therefore, this project is worthwhile to present more systematic and scientific approach for patient's uniform design which gives functional and psychological satisfaction to the patients.

CPPU유도 참다래 단위결과 과실의 특성

조윤섭,조혜성,박문영,박재옥,박태동,김월수 全南大學校 農業科學技術硏究所 2001 農業科學技術硏究 Vol.36 No.-

This study was designed to find out an alternative to artificial pollination in kiwifruit production. The parthenocarpic kiwifruits induced by (N-2-chloro-4-pyridyl)-N-phenyl urea (CPPU) treatment tended to be less attractive due to deep furrowing and excessive outgrowth of stigma in mature fruits. Especially, on flower buds after CPPU spray, severe fruit-drop was induced. It was considered enough to spray CPPU at more than 4ppm to attain sufficient fruit set but needed to spray CPPU at more than 16ppm to attain marketable fruit size. When CPPU at 16ppm was sprayed to the same flower once, twice or three time, the fruits received CPPU treatment more time was larger but less attractive. Application of CPPU mare than at 16ppm seemed to be necessary to produce fruits heavier than 80 gr. Enlargement of the fruits received CPPU treatment mainly occurred cross wisely and vertical development was not affected and thickening of outer pericarp primarily contributed to the fruit enlargement. Difference in flesh color or contents of vitamin C and sugars between control fruits and CPPU-treated fruits was not noticed. In conclusion, CPPU treatment to induce parthenocarpic kiwifruits could be commercially applicable, only the method for improving fruit appearance is worked out.

니트제품 생산업체 디자인·기획 및 생산 현황에 관한 연구

이윤미,박재옥,이연희 服飾文化學會 2004 服飾文化硏究 Vol.12 No.2

The purpose of this study is to investigate design process and production in the Korean knitwear industry and to examine the possibility fur our knitwear industry to develop into the developed countries' model. This purpose was empirically pursued through questionnaires, of which respondents were 110 designers, merchandiser(MD), and top managers of knitwear companies and jobbers in Seoul. The questionnaires were analyzed on the basis of such statistical tools as χ^(2)-test, t-test, and one-way ANOVA. Findings of this study were as follows. Designers of knitwear companies evaluated that their design is more creative than that of designers of jobbers. But designers of knitwear companies and jobbers all responded that they obtained their design ideas from samples produced by leading foreign knitwear companies. The dominant form by which knitwear companies use jobbers was that knitwear companies do a major part of designing and order jobbers to elaborate it and produce knitwear samples. The most important reason of hiring jobbers was to obtain specialized technical skills and knowledge.

HFC-134a와 대체냉매 HFC-152a에 CF_3I를 혼합한 자동차냉매 특성

권일욱,박찬수,홍경한,문기선,최운수,서의경,윤갑식,이종인,하옥남 朝鮮大學校 機械技術硏究所 2002 機械技術硏究 Vol.5 No.1

These days, an attention of environment has been increasing all over the world. to prevent the green house effect and destruction of an ozone layer, an ozone destruction potential(ODP) be zero and a refrigerant for low global warming potential(GWP) is needed. HFC-134a, in which hydrogen is mixed instead of chlorine is a refrigerant used for automobile conditioners and its destruction potential is ecologically zero. However, it is not considered as a perfect substitutive refrigerant as its GWP is high. It is studied refrigerant mixtures in which HFC-134a, HFC-152a and CF_3I with low GWP and zero ODP are mixed by experimentally and concluded as follows; 1. with the variation of speed of compressor outside temperature and flow rate, the heat of evaporator and compressor and coefficient of performance was varied, and influenced the air conditioner. 2. The pressure of evaporator was decreased with increasing the speed of compressor and that of the refrigerant HFC-134a was higher 21% than that of azotrope refrigerant mixed with CF_3I. The overall capacity of condensor and evaporator was increased and HGC-134a was higher than azotrope refrigerant mixed with CF_3I 3. The capacity of evaporator with the refrigerant HFC-134a was higher 6% than azotrope refrigerant mixed with CF31 and the required power with zaotrope refrigerant mixed with CF_3I was higher 11% than that of HFC-134a. 4. The COP of the refrigerant FHC-134a was higher 31% in 1000RPM. when outside temperature was increased, COP was decreased. 5. Performance of HFC-134a is better than azotrope refrigerant mixed with CF_3I but prefered zaotrope refrigerant mixed with CF_3I considering the environment.

PFC를 적용한 AC/DC 승압형 컨버터 설계

백형래,박수강,최연옥,한엄용,이성길 조선대학교 에너지.자원신기술연구소 1999 에너지·자원신기술연구소 논문지 Vol.21 No.1

Single-Phase diode rectifiers are widely used in industry. These rectifier, however, generate many harmonic components in the AC Power line and have the poor input power factor, which may create a power quality problem for other electrical apparatus in the vicinity of the rectifier. Power factor improvement and harmonic reduction in the AC line current have become very significant problems in single-phase diode rectifiers. In this paper, the high power factor boost converter using soft switching is proposed to improve the demerit. The simulation results show the validity of the proposed system.

패류중 중금속함량에 관한 연구

신현수,허옥순,이진하,김세은,주인선,신동우,강석종,박만종,김지연,김근희,강숙경,정래석,허숙진,소유섭,최장덕,문병우,김진수 식품의약품안전청 2001 식품의약품안전청 연보 Vol.5 No.-

본 연구는 패류중 중금속함량 측정을 위한 분석효율이 높고 간편한 분해법을 찾아내어 그 방법에 의끓 유종중인 패류중 중금속함량을 파악하고자 수행하였다. 시료를 분해시키는 Microwave와 습식, 건식회법을 비교한 결과 변형습식회화르가 가장 적합하였다. 변형습식회차딘는 려린0,3+C104+H2SOf의 혼찰산을 쪼 · j 1 (v/v)의 비율로 혼합하여 사용하였 을 때 회수을 Pb린틴. Cd 97.8, Cu 94.2, Zn 92.8%를 나타내었근 분해시간은 2~2.5시간 소요되었다. 유통중인 패류중 중금속함량 」최소~최대(평균), mgAgl 은 Pb 0.028~o.528(0.153), Cd 0.OO7~1,832(0.587), Cu 0.360~37.375(4.6691, Zn 6.317~233.2iO(38.881), Hg 0.001 ~O.151(0.012)mg/ltg으로 나타났다. 또한 유통중인 5종의 패류중 중금속평균항량이 생산지 하재지역에서 구입한 패류에 비해 모든 중금속언써 약간 높은 함량을 보였으나 오염된 수준이 아닌 자연함유량수준이었다. This study was conducted to improve the digestion method for the determination of heavy metals in shellfishes and to estimate the contents of heavy metal in commercial shellfishes by their digestion method. This digestion method was compared microwave with wet and dry ash digestion for shellfish samples, obtained results showed that the modified wet ash Ⅱ digestion was convenient and easy to use. For the modified wet ash Ⅱ digestion, The mixed acid of HNO₃+HClO₄+H₂SO₄(25:5:1, v/v) was used. Under this condition, Recoveries were Pb 94.3, Cd 97.8, Cu 94.2 and Zn 92.8% and digestion time was ∼2.5 hours. The contents of heavy metal [minimum∼maximum (mean), mg/kg in commercial shellfishes were as follows ; Pb:0.028∼0.528(0.153), Cd:0.007∼1.832(0.587), Cu:0.360∼37.375(4.669), Zn:6.317∼233.250(38.881), Hg:0.001∼0.151(0.013). The contents of heavy metal in commercial shellfishes of five species were slightly greater than those of shellfishes purchased at Hajae. There was no great difference between the contents of heavy metal of Hajae and those of shellfishes purchased at Whole market.

환자복 디자인 개선에 관한 연구

안민영;서미아;박재옥;이연희 한양대학교 2004 韓國 生活 科學 硏究 Vol.- No.24

The purpose of this project was to find out design elements of patients' uniform which satisfied needs and wants of patients and nurses. Data were obtained via a self-administered questionnaire from 127 patients who were admitted and nurses who employed to Hanyang University Hospital. The questionnaires were composed of dissatisfaction of exiting patient's uniform, evaluation criteria, design preference, and demographic factors. For data analysis, Descriptive statistics, one-way ANOVA, and Duncan test were employed. The results of this study were as follows; 1. Patients and nurses considered important design elements of neckline, sleeve length, waistband of the pants, and number of pocket. 2. There were differences in dissatisfaction of exiting patient's uniform related to role types. Patients considered factors related to movement such as comfort, easy to dress more importantly, while nurses considered factors related to affairs such as convenient for medical treatment, classification of size, and colorfastness to the laundry more importantly. 3. There was a significant difference in evaluation criteria of patients' uniform related to role types. Nurses considered more important expressive and economic criteria, while patients considered more important functional criteria than others. 4. There was a difference in deign preference of patients' uniform related to role types. Patients preferred uniform design which composed of U-neckline, sleeve of three-quarter length, pants of ankle length, elastic-band with a drawstring, and colors of pink and light green, while nurses preferred design which composed of round neckline, long sleeve length, pants of floor length, and colors of light green and light blue.

현대 패션에 나타난 그린(GREEN)디자인

이현아;이연희;박재옥 한양대학교 2005 韓國 生活 科學 硏究 Vol.25 No.2

The purpose of this study was to analyze the characteristics of green design in the 1990s based on ecological aesthetics and identify the trend toward eco-design in different times. It was based on our study of literatures and cases along with analysis of contents. To establish the concept of eco-design, the case study was conducted on relevant literatures and photographs, and in terms of cases related to fashion, the study of all design trends occurred in the past analyzed the characteristics of design elements between 1990 and 1999. As the result, trend toward green design could be split into naturalism, minimalism and recycle. The first two trends share the core concept of reduce. As the trend pursued minimalism, at the production stage, it had a simple form and was designed using materials that can minimize the damage to the environment. This kind of materials had natural colors such as ecru. Addition ally, in the recycle trend, recycling fashion that came from the need to conserve resources and protect environment caught on with the reuse of old materials and various methods of expression through diversity of materials. Almost anything could be used; fabrics, paper, recycled plastic, and everyday products. And you can see that fashion had played an active role in recycling resources using various methods like patchwork, collage, fraying, fringe, and layering