한국 국립공원 산림생태계의 수목 탄소저장량 평가

이상진,박홍철,박관수,김현숙,이창민,김진원,심규원,최승운,Lee, Sang-Jin,Park, Hong-Chul,Park, Gwan-Soo,Kim, Hyoun-Sook,Lee, Chang-Min,Kim, Jin-Won,Sim, Gyu-Won,Choi, Seung-Woon 한국환경복원기술학회 2022 한국환경복원기술학회지 Vol.25 No.3

The purpose of this study is to quantitatively evaluate the amount of carbon storage for trees in forest ecosystem to support the foundation for carbon neutrality implementation in Korea National Park. It targeted 22 national parks designated and managed as national parks in Korea, and conducted research on forest trees in the terrestrial ecosystem among various natural and ecological carbon sink. The survey and analysis method followed the IPCC guidelines and the National Greenhouse Gas Inventory in Korea. The amount of tree carbon storage in the forest ecosystem of Korea National Park was confirmed to be about 218,505 thousand CO₂-ton and the amount of carbon storage per unit area was 570.8 CO₂-ton per hectare. Compared to 299.7 CO₂-ton per hectare, the average carbon storage per unit area of the entire Korean forest, it was found that about twice as much carbon was stored when assuming the same area. In other words, it means that the tree carbon storage function of the national park is about twice as high as that of the average tree carbon storage function of entire Korean forest. It has great implications in Korea National Park not only provides biodiversity promotion and exploration services as a national protected area, but also performs excellent functions as a carbon sink.

Parthenogenetic Activity of Porcine Sperm Factor to In Vìtro Matured tured Porcine Oocyte

Park, Chun_Gyu,Jin-Ki Parκ,Sung-Woo Kim,Ju-Young Lee,Joo-hee Han,Seung-Eun Lee,Kyung-Nye Baek,Won-Chung Chang 한국동물생명공학회(구 한국동물번식학회) 2004 Reproductive & Developmental Biology(Supplement) Vol.28 No.2s

당뇨병환자에서 뇨증 Fibronectin농도의 증가에 관한 연구

한승범,조준승,손건영,서성문,박근용,조성래,박규영,박정모,이인규,여준기 啓明大學校 醫科大學 1994 계명의대학술지 Vol.13 No.4

Plasma fibronectin is an α₂-glyoprotein, which is produced by vascular endothelial cells. Raised level of plasma fibronectin has been observed in diabetic patients particularly in the presence of microvascular complications. However, no available data exist about urine level of this glycoprotein in diabetic patients. We measured urine fibronectin level by ELISA methods in 54 diabetic patients who have microvascular comlications or not. The following results were obtained. 1) Urine fibronectin level(㎍/g creatinine) in diabetic group(1740.0±678.0) is increased compaired with those in normal control group(471.0±59.0). but this results were not significantly different among two groups(P>0.05). 2) Urine fibronectin level(㎍/g creatinine) was significantly increased in patients with nephropathy (6188.0±3144.0) compared with those in normal control group(471.0±59.0) and patients without nephropathy(645.0±251.0)(P<0.001). 3) There were a significant correlation between BUN, creatinine, creatinine clearance, 24hr urine total protein and urine fibronectin level in diabetic patients. Our data suggest that urine fibronectin excretion level might be used as a sensitive guide for diabectic nephropathy.

관동맥질환에서 저밀도 지단백 입자 크기의 분포

임효영,김인숙,승기배,강동헌,전두수,장기육,박준철,이수영,홍순조,최규보 대한순환기학회 1998 Korean Circulation Journal Vol.28 No.8

전기화학적 방법을 이용한 수소제거에 관한 연구

박창규,김재홍,김정구,안승호,박진석,김종성,진태은 대한금속재료학회 2005 대한금속·재료학회지 Vol.43 No.3

Hydrogen embrittlement (HE) mitigation on the low alloy steel was studied using electrochemical technique. This method can be applied to reduce HE susceptibility. Hydrogen induced cracking (HIC) characteristics of the low alloy steel was investigated in aerated and deaerated borate buffer solution (0.3M H₃BO₃ + 0.074M N₂B_(4)O_(7), pH 8.4). The electrochemical properties of the low alloy steel showed passive behavior in this environment. By performing galvanostatic and potentiostatic test, hydrogen was charged and discharged to specimens respectively. By applying the potential of +630 mV_(SCE), the accumulated hydrogen was eliminated electrochemically. A specimen discharged for 24h indicated the efficiency of the hydrogen discharge up to 99.9%. Slow strain rate tests (SSRT) results showed that a specimen with higher hydrogen concentration revealed inferior mechanical properties such as shorter time to fracture, lower elongation, ultimate tensile strength and yield strength values. Furthermore, SEM fractographs revealed that the higher the hydrogen concentration is, the more probable the features of brittle fracture are. (Received July 26, 2004)

Cu-6Ni-4Sn 합금에서 Cr 첨가에 따른 전기화학적 특성에 관한 연구

박창규,김정구,안승호,한승전 대한금속재료학회 2005 대한금속·재료학회지 Vol.43 No.3

Corrosion characteristics of Cu-6%Ni-4%Sn-x%Cr alloys in a acid-chloride solution (0.1M H₂SO₄+ 0.0056M NaCl) at pH = 6, were studied as a function of chromium addition. Three kinds of Cu-6%Ni-4%Sn-x%Cr alloys were prepared by melting, and casting, followed by thermomechanical treatments. The corrosion behavior of Cu-6%Ni-4%Sn-x%Cr alloys was investigated by electrochemical corrosion tests (potentiodynamic polarization test, electrochemical impedance spectroscopy) and surface analyses (optical microscopy, electron probe micro analysis, scanning electron microscopy). Cr additions were found to prevent the localized corrosion behavior. This is the reason that the small addition of Cr promoted the decomposition behaviors of the supersaturated solid solution a in Cu-6%Ni-4%Sn alloy, i.e., the number of like-Sn-rich carbide impurities (LCI), which increased the galvanic effect between the matrix and the LCI, decreased with increasing the Cr addition. (Received September 8, 2004)

플라즈마 산화 처리된 65/35황동의 산소 분압별 부식특성에 관한 연구

박창규,안승호,김정구,정윤모,한전건 대한금속재료학회 2005 대한금속·재료학회지 Vol.43 No.4

Brasses are the most widely used copper-based alloys because of the good corrosion resistance, formability, high strength and excellent hot-working properties. However, dezincification occurs when one or more components of an alloy are more susceptible to corrosion than the rest and, as a result, are preferentially dissolved. In order to enhance the corrosion resistance, the oxide film was deposited on the 65/35 brass by pulsed dc plasma oxidation with various pressure. The corrosion behavior of plasma oxidized brasses with various oxygen pressure was investigated by electrochemical methods (potentiodynamic polarization test, potentiostatic test, electrochemical impedance spectroscopy) and surface analyses (x-ray diffraction, scanning electron microscopy, auger electron spectroscopy, electron probe micro analyzer). Particular attention was paid to the effects of oxygen pressure and oxide thickness on the coating properties related to the corrosion behavior. From the results of electrochemical test, it was found that the oxidized brass under condition of 1.5 Torr oxygen pressure was effective in improving corrosion resistance. It was attributed to the protective oxidized layer (ZnO). Finally, an optimized oxidation condition for corrosion protection was found to be 1.5 Torr oxygen pressure and 1 pun thickness. (Received September 3, 2004)

4∼5세기 加耶土器의 變動과 系統에 관한 硏究

朴升圭 동의대학교 인문과학연구소 2000 인간과 문화 연구 Vol.5 No.-

부신피질 자극호르몬 단독결핍 1례

박경식,이승현,최석영,박태규,이동화,이찬우,정성복,이인규 啓明大學校 醫科大學 1997 계명의대학술지 Vol.16 No.3

부신피질 자극호르몬 단독결핍은 국내에서 7례만이 보고된 희귀 질환이며 병인 및 경과 등 아직 불분명한 측면이 많다. 이는 질환지체의 희귀성도 있지만 치료후 자연경과에 대한 장기적인 추적검사가 이루어진 경우가 드물기 때문이기도 하다. 저자들은 비특이적인 전신증상을 주소로 내원한 폐경기후의 56세 여자 환자에서 자가면역질환의 증거없이 고프로릭틴혈증을 보인 부신피질 자극호르몬 단독결핍 1례를 경험하고 1년간의 부신피질호르몬 대치요법후 추적검사를 실시하였기에 문헌 고찰과 함께 보고하는 바이다. Isolated ACTH deficiency is a rare disorder which shows secondary adrenal insufficiency with normal states of other pituitary hormones. A 56-year-old postmenopausal woman complaining general weakness and intermittent mental confusion presented negligible serum cortisol and ACTH level with hyperprolactinemia and mild hyponatremia. Rapid ACTH stimulation test did not show significant increase of serum cortisol level. Combined pituitary stimulation test showed negligible response of cortisol and ACTH, and slightly decreased response of prolactin and gonadotropin. But the responses of TSH and GH were normal. There was no evidence of organic pituitary of hypothalamic lesion in brain MRI and antithyroid autoantibody was not detected in serum. After receiving 12 months of glucocorticoid replacement therapy, she skipped the medicine for 3 weeks and we performed follow-up endocrinologic tests. Serum ACTH and cortisol level was also negligible and prolonged ACTH simulation test showed normal response of serum cortisol. CRF stimulation test showed no response of serum ACTH. Basal prolactin level was decreased to near normal and combined pituitary stimulation test showed normal response of prolactin with slightly blunted response of TSH and GH. We concluded that the case was nonautoimmune origined isolated ACTH deficiency which was accompanied by hyperprolactinemia and resultant deficiency of gonadotropin, so we report this case with review of literatures.

순차적 크리깅기법을 이용한 미소혼합기의 최적화

박재용,유진식,황승민,임민규,오영규,김용대,한석영,맹주성 한국공작기계학회 2008 한국공작기계학회 추계학술대회논문집 Vol.2008 No.-

An active micro-mixer, which is composed of an oscillating micro-stirrer in the micro-channel to provide effective mixing was optimized. The effects of molecular diffusion and disturbance by the stirrer were considered with regard to two types of mixer models: the simple straight micro-channel and micro-channel with an oscillating stirrer. Two types of mixer models were studied by analyzing mixing behaviors such as their interaction after the stirrer. The mixing was calculated by Lattice Boltzmann methods using the D2Q9 model. In this study, the time-averaged mixing index formula was used to estimate the mixing performance of time-dependent flow. The mixing indices of the two models were compared. From the results, it was found that the mixer with an oscillating stirrer was much more enhanced' and stabilized. Therefore, an approximate optimization of an active micro-mixer with an oscillating stirrer was performed using Kriging method with OLHD (Optimal Latin Hypercube Design) in order to determine the optimal design variables. The design parameters were established as the frequency, the length and the angle of the stirrer. The optimal values were obtained as 1.5754, 0.803D and ±45°, respectively. It was found that the mixing index of the optimal design increased by 83.36% compared with that of the original design.