새터민의 기초직업능력 진단

이찬,이용환,이윤조,신재호,홍윤선,최홍주 한국농업교육학회 2007 농업교육과 인적자원개발 Vol.39 No.3

이 연구는 새터민의 고용현황 및 문제점을 고찰하고 새터민의 기초직업능력을 진단하여 직업능력개발 방향에 있어 시사점을 제공하는데 그 목적이 있었다. 새터민의 기초직업능력 진단을 위한 도구는 관련 문헌 고찰과 pilot test 및 새터민 교육ㆍ지원 담당자의 안면타당도 검증 등을 통하여 개발되었다. 연구의 목적을 달성하기 위하여 현재 하나원에서 사회 적응교육 및 직업교육을 받고 있는 새터민의 기초직업능력을 진단함으로써 우리나라에 거주하는 새터민의 기초직업능력을 파악하였다. 주요 결과는 다음과 같다. 첫째,새터민들의 기초직업능력 중에서 직업윤리능력은 상당히 갖추어져 있는 것으로 인식하고 있으며,정보능력,즉 컴퓨터 사용능력은 상대적으로 낮은 수준으로 평가하고 있다. 둘째,성별에 따라서는 기초직업능력에 있어서 통계적으로 유의미한 차이를 보이지 않았다. 연령에 따라서는 정보능력과 수리 능력,조직이해능력 영역에 있어서 통계적으로 유의미한 차이를 보였다. 셋째,학력에 따라서는 문제해결능력과 의사소통능력,수리능력,대인관계 영역에 있어서 통계적으로 유의미한 차이를 보였다. 넷째,새터민의 취업을 위한 기초직업능력 개발에 있어 정보능력,수리능력,의사소통능력의 비중 확대,수준별ㆍ맞춤형 교육프로그램개발,새터민을 위한 취업 및 사업정보 제공 등을 제시하였다. The purpose of this study was to explore the current employment status and HRD issues of North Korean refugees and to assess their level of the basic vocational competencies. The assessment tool for the basic vocational competencies was developed based on literature reviews and pilot tests from the North Korean refugees. The face validity was verified by educators and counselors for the North Korean refugees. The major findings in this study were as follows: First, among the basic vocational competencies of the North Korean refugees, the level of vocational ethics was the highest and the level of information teachnology competency was the lowest. Second, the North Korean refugees' basic vocational competencies showed no statistical differences by gender. Territories of information competency, mathematical competency, and communication competency showed statistical differences by age. Third, territories of problem-solving competency, communication competency, mathematical competency, mathematical competency, and communication competency showed statistical differences by education level. Fourth, to develop the basic vocational competencies for North Korean refugees, the following suggestions were presented.; 1) extend the importance of information technology, mathematical, and communication competencies,; 2) develop the customized training programs by competency level,; and 3) offer the employment information for North Korean refugees.

Cytoreductive surgery with hyperthermic intraperitoneal chemotherapy in management of peritoneal carcinomatosis: Single center experience in Korea

Hee Ju Lee1,HyungJoo Baik1,박요한,서상혁,김광희,Ki Beom Bae,Kwan Hee Hong,김기향,변정미,Dae Hoon Jeong,Kyung Bok Lee,오민경,조광래,안민성 대한종양외과학회 2019 Korean Journal of Clinical Oncology Vol.15 No.2

Purpose: Peritoneal carcinomatosis (PC) has been considered a terminal condition and cytoreductive surgery with hyperthermic intraperitoneal chemotherapy (CRS/HIEPC) is regarded as an alternative therapeutic option. This study aimed to evaluate the 30-day clinical outcomes of CRS/HIPEC and the feasibility of the surgery by investigating the morbidity and mortality in Inje University Hospital. Methods: Data were retrospectively collected from 19 patients with PC who underwent CRS/HIPEC at Inje University Hospital in 2018. We evaluated pre-, intra-operative parameters and postoperative clinical outcomes and early complications. Results: The mean operating time was 506.95 minutes and the mean blood loss was 837.11 mL. Six cases (31.58%) had morbidity of grade III or above. A longer operating time (≥560 minutes, P=0.038) and large blood loss (≥700 mL, P=0.060) were positively correlated with grade III or worse postoperative complications. Conclusion: Our early experience with CRS/HIPEC resulted in a 31.58% morbidity rate of grade III and above, with risk factors being longer operating time and greater intraoperative blood loss. As the surgical team’s skills improve, a shorter operating time with less intraoperative blood loss could result in better short-term outcomes of CRS/HIPEC.

The Identification of Aucklandiae Radix, Inulae Radix, Vladimiriae Radix and Aristolochiae Radix, Using Macroscopic, Microscopic and Physicochemical Methods

Jee-Hyun Yoon,Ha-Yeong Park,Tae-Ju Kim,Seung-Ho Lee,Jung-Hoon Kim,Guem-San Lee,Hong-Jun Kim,Young-Sung Ju 대한한의학회 2014 대한한의학회지 Vol.35 No.4

The Identification of Aucklandiae Radix, Inulae Radix, Vladimiriae Radix and Aristolochiae Radix, Using Macroscopic, Microscopic and Physicochemical Methods

Yoon, Jee-Hyun,Park, Ha-Yeong,Kim, Tae-Ju,Lee, Seung-Ho,Kim, Jung-Hoon,Lee, Guem-San,Kim, Hong-Jun,Ju, Young-Sung The Society of Korean Medicine 2014 대한한의학회지 Vol.35 No.4

Objectives: This study aimed for establishing the discriminative criteria for Aucklandiae Radix, Inulae Radix, Vladimiriae Radix and Aristolochiae Radix, which can be confused as 'Mokhyang', because of similar appearances and synonyms. Methods: Morphological characteristics of dried herbal medicines were compared by macroscopic observation. To examine microscopic features of 'Mokhyang', paraffin embedding and the staining by using Ju's method were conducted. Physicochemical experiments were performed using HPLC analysis and antioxidant assay. Results: The types of stem, phyllotaxy and leaf shape were chosen as macroscopic criteria and the size, oil spots, color and root top as well as phloem and central cylinder were compared using microscopic features. The HPLC results showed different amounts of costunolide and dehydrocostuslactone among Aucklandiae Radix, Inulae Radix and Vladimiriae Radix. However, Aristolochiae Radix only contained aristolochic acid. The antioxidant assays also showed that Vladimiriae Radix exhibited strongest antioxidant activity followed by Aucklandiae Radix, Inulae Radix and Aristolochiae Radix. Conclusions: These results demonstrate that macroscopic, microscopic and physicochemical methods would be useful tools for the discrimination of 4 kinds of 'Mokhyang'.

타타늄의 열처리 조건에 따른 동전위 양극분극특성 및 표면 미세구조 변화

주동현,이용렬,정영화,양홍서,박상원,이도재,송호준,박영준 大韓齒科器材學會 2002 대한치과재료학회지 Vol.29 No.2

The corrosion resistance of metallic implants is essential for successful implant osseointegration. Moreover, the implant surface should have appropriate surface roughness for the attachment of the osteoblast and collagen fibrils. When titanium is exposed to air a thermodynamically very stable oxide film is formed at once. This oxide is very thin and yet it protects the metal from corrosion instantaneously. However, the oxide would not be ideal, and it would be supposed that the state of oxide film would be various by the different conditions when it is formed. The objective of this study was to evaluate the electrochemical properties and surface microstructural changes of titanium after passivation treatment or exposure to high heat (in vacuum or in air). ASTM grade 2 commercially pure titanium (Ti) disks of 10㎜ diameter were wet ground and polished with 240 and 600 grit SiC, and then ultrasonically cleaned with distilled water and ethanol. Cleansed as-received samples (As-R group) were passivated with 30% nitric acid solution at 50℃ for 15 minutes to make the Pas group. The Std-V samples were made by treating the Ti disks in vacuum quartz tube (10^-8 Torr) at 530℃ for 40 min for stress relieving, followed by annealing at 700℃ for 90 min, and then slow cooling to room temperature. The Std-A samples undergo identical procedure as the Std-V group except that it is done in air. For 530℃-V samples, Ti disks were heated at 530℃ for 40 minutes and slow cooled to room temperature. The 1000℃-V samples were produced by heating Std-V specimens again at 1000℃ for 2 hr, followed by cooling to room temperature. 530℃-A and 1000℃-A samples were also prepared. Potentiodynamic anodic polarization measurement, SEM, AFM and XRD analysis were performed to evaluate the effects of the various treatments. The difference in the mean values of E_corr between groups showed statistically significant difference (P<0.05), but that of I_corr did not show significance (P>0.05). When Ti surface was passivated there was a shift of corrosion potential (E_corr) in the noble direction and a lower corrosion current density (I_corr) value. Std-A samples showed most noble E_corr value among the tested groups. 530℃-V samples showed more noble E-corr than other tested groups except Std-A group. 1000℃-V samples showed more noble E-corr than those of Std-V sample. In the case of Std-, 530℃- and 1000℃-groups, -A sub-groups showed better corrosion resistant characteristics than -V sub-groups in regard to E-corr and I_corr values. In the SEM observations, the surfaces of the As-R samples showed only scratch line on smooth surface. In Pas samples, thick oxide layer covered the surface under high magnification observation. 530℃-A samples were covered by oxide granules, and Std-A samples had 25~50 nm-thick acicular oxides. The 1000℃-A samples were covered by coarse oxide crystals with a granule diameter of 0.1~0.6 μm having a gross appearance of milky white color, which was identified by XRD as a rutile. On the other hand, 1000℃-V samples showed an Widmansta¨tten structrue of which the orientation of the lattice is formed along crystallographic planes of the parent crystals. On the AFM observation, 530℃-A samples showed RMS roughness of 79.38 nm which is 5 times rougher than those of the As-R samples. Std-A sample had a roughness of 330.47 nm which is about 20-times rougher than that of the As-R sample. 1000℃-A samples were covered by coarse granular oxides and the roughness were about 0.56 μm. Vacuum sub-group samples showed a more smooth surface than air sub-group samples, and the oxide film was more dense. Due to variability of the surface treatment and heat treatment conditions, the process of the oxide formation seems to be affected thereby making the corrosion properties and surface micro-morphology different. However, more various electrochemical analysis together with surface analysis, and an investigation for the effects of those on the osteoblast cell adhesion and calcium phosphate apposition are needed for the improvement of the osseointegration rates of the titanium implants.

이온교환법에 의한 고분자전해질형 연료전지용 전극의 제조와 특성 고찰

이주성,박수길,오태영,이홍기,심중표 한양대학교 에너지.환경기술연구소 1995 에너지·環境技術論文集 Vol.2 No.-

고분자전해질형 연료전지용 전극의 백금 이용률을 높이기 위해 촉매제조시 이온교환법을 이용하여 백금을 carbon에 담지하고 이에 따른 전지성능변화를 고찰하였다. 전극제조시 Nafion이 첨가되지 않은 경우 이온교환양이 증가함에 따라 전기화학적인 활성이 증가하여 전지성능이 증가하였다. 전극제조시 Nafion이 첨가된 경우, Nafion첨가량이 증가함에 따라 전지성능은 증가하였는 데 Nafin첨가에 의해 이온교환되지 않은 백금이 전기화학적인 활성을 가지게 되어 전지성능은 증가하였다. To improve platinum utilization of PEMFC(Proton exchange membrane fuel cell) electrode, in preparing catalytic powder, platinum was impregnated on carbon by ion exchange method and its cell performance was investigated. When electrode was prepared without adding Nafion solution, as Nafion pre-impregnated amount was increased, electrochemically active area and cell performance was increased. When electrode was prepared with Nafion solution, increase of adding Nafion amount was improvement of cell performance. By adding Nafion at preparation of electrode, non ion-exchange platinum was shown electrochemical activity, cell performance was improved.

주의력 결핍·과잉행동장애 소년의 자기공명 영상을 이용한 뇌량 및 측뇌실의 계량적 특성분석

이정섭,홍강의,김주한 大韓神經精神醫學會 1997 신경정신의학 Vol.36 No.2

By means of retrospecitive quantitative neuroanatomic imaging, the authors assessed the corpus callosum and the lateral venticle in the boys with attention deficit hyperactivity disorder(ADHD). The midsagittal cross-sectional area of the corpus callosum, divided into seven regions, and the axial ventricle-brain ratio were measured from magnetic resonance images of 18 boys with ADHD and 15 comparison boys. Two anterior regions, the genu and the rostral body, were found to have significantly smaller areas in the ADHD boys. There was no significant difference in ventricle-brain ratio between ADHD and comparison boys. This finding supports the theory of abnormal frontal lobe development in ADHD.

실드공법에 의한 도심지 터널의 해석

이홍주,김수석,진치섭 釜山大學校 都市問題硏究所 1997 都市硏究報 Vol.5 No.-

The use of underground space has been increased according as area of city has been limited by the urban concentration of population. So it was demanded to increasing tunnel, but this tunnel construction was made trouble in open cut method which has been used generally. Consequently, shield tunneling method is highlighting in urban civil. In the past decade soft clay shield tunneling technology have been improved to permit continuous support to the face of a tunnel. These advanced shield can be operated such that in initial heaving is created, this helps to decrease the inward soil movement into the tail void. In this paper, the measurement of slurry shield and EPB shield were used and two dimensional elasto-plastic programs EPSHILD developed for shield tunnel analysis were approved. The excavation steps corresponding with construction stages were settled and heaving load, load factors were considered. This study is based on the instantaneous settlement which is occured in the process of shield construction but not the secondary settlement by consolidation.

文章音聲認識을 위한 效率的인 言語 모델링

이주덕,홍광석 成均館大學校 科學技術硏究所 1997 論文集 Vol.48 No.2

This paper presents the language model and the selection of candidate for words in sentence speech recognition for Korean language. In this paper, a small scale task for airplane reservation was used for recognition experiment. Considering the size of task, the language model was based on the formal language theory and gave priority to the lexical property of the task. The selection of candidate for words considered practical recognition rate of the task. The result of the experiments show that the application of language model was fitted with the recognition task and the proposed method for the selection of candidate was effective in sentence recognition.

Green 정리를 이용한 철근 콘크리트 단주해석

이홍주,박현재,진치섭 釜山大學校生産技術硏究所 1997 生産技術硏究所論文集 Vol.53 No.-

구조물 설계에서, 축하중과 2축 휨을 동시에 받는 기둥 설계를 자주 접하게 된다. 이러한 부재의 해석과 설계는, 모멘트 평형에 따른 여러 변수들의 값을 동시에 구하기 위하여 반복적인 작업이 필요하기 때문에 많은 시간을 요구한다. 본 연구에서는 축력과 2축 휨을 받는 철근 콘크리트 단주의 극한강도를 계산할 수 있는 컴퓨터 프로그램 COLI을 개발하였고, Green정리를 사용하여 임의 형상의 역학적 특성을 계산할 수 있는 수치 방법을 제시하였다. In structural design, columns subjected to combined axial load and biaxial bending are frequently encountered. The analysis and design of such members, are both time consuming and demanding because an iterative procedure is required in order to simultaneously evaluate a number of variables to achieve moment equilibrium. A computer program COLI is developed to compute the ultimate strength of reinforced concrete short columns subjected to combined compression and biaxial bending in this paper. A numerical procedure using Green's theorem is presented that calculates the mechanical properties of generic shapes.