우리나라 지역 직업성질환 감시체계의 현황과 전망

임종한,장성실,김성아,문재동,채창호,홍윤철,김수영,김진석,김영욱,한상환,이혜숙,원종욱,송동빈,하은희,강성규 대한산업의학회 2001 대한직업환경의학회지 Vol.13 No.2

기존의 특수건강진단과 작업환경측정을 통한 직업병 관리가 진폐증, 소음성난청 등의 소수 특정질환에 국한되고 실제 직업병 발생 규모 파악이나 신종 직업병의 발견에 한계를 보인다는 사실은 산업의학전문가들 사이에서도 공감을 이루고 있다. 미국과 영국 등에서의 직업성질환 감시체계에 대한 경험은 우리 나라의 직업성질환 감시체계 구축에도 새로운 자극제가 되면서, 1998년이후 인천, 대전, 여천, 구미, 부울경 지역에서 지역 직업성질환감시체계를 산업보건관리의 중요한 시스템으로 구축하려는 노력이 확산되고 있다. 새로이 구축되어지는 이들 지역 직업성질환 감시체계는 감시하고자 하는 대상질환, 활용 가능한 인적자원 및 자료원, 지역 의료체계의 특수성 등에 따라서 목적과 방법을 달리하면서 독특한 형태로 발전을 하고 있다. 각 지역단위 감시체계들이 그 상황에 맞게 독특한 목적과 전략들을 발전 시키면서도, 향후 발전할 국가적인 차원의 직업성질환 감시체계 구축을 위하여 직업성질환 감시의 기본 전략 등을 공유하는 등의 노력이 필요하다. 환례 정의 및 기본적인 등록 서식의 공유, 직업성질환 감시 자료원의 발굴, 공동의 정보 네트워크 및 직업성질환 감시 데이터베이스 구축 등 직업성질환 감시활동을 지원하기 위한 여러 기초 인프라 구축에 힘을 모아야 할 것이다. 우리 나라에서 직업성질환 감시체계를 성공적으로 구축하기 위해서는 수집된 자료의 질 관리를 위한 직업성질환 감시의 원칙 제정과 감시 전략의 공유 등이 필요하며, 전국적인 직업성질환 감시체계의 하부구조라고 할 수 있는 지역감시체계의 기초 토대 마련과 강화작업이 절실하게 필요하다.

3단계 층화확률화응답모형

김종민,채성산,Kim, Jong-Min,Chae, Seong-S. 한국통계학회 2010 응용통계연구 Vol.23 No.3

직접면접으로 민감한 질문을 할때 발생하는 무응답이나 거짓응답의 문제를 개선하고자 Warner (1965)가 최초로 제안한 확률화응답모형에 관한 연구는 이후 많은 연구자들에 의해 개선, 발전되어 오고 있다. 본 연구에서 표본은 층화임의복원추출법에 의해 추출되었으며, 표본배분은 최적배분법에 의해 배분되었다. 한편, Kim과 Elam (2005)의 2단계 층화확률화응답모형을 확장한 3단계 층화확률화응답모형을 사용하였다. Kim과 Elam (2005)의 2단계 층화확률화응답모형과 상대효율을 비교한 결과 본 논문에서 제시한 3단계 층화확률화모형의 효율성이 상대적으로 높다는 결과가 도출되었다. 그러나 2단계확률화응답모형을 3단계로 확장함으로써 상대적으로 효율성은 증대되지만 반대로 조사과정의 어려움이 예상된다. Asking sensitive questions by a direct survey method causes non-response bias and response bias. Non-response bias arises from interviewees refusal to respond and response bias arises from giving incorrect responses. To rectify these biases, Warner (1965) introduced a randomized response model which is an alternative survey method for socially undesirable or incriminating behavior questions. The randomized response model is a procedure for collecting the information on sensitive characteristics without exposing the identity of the respondent. Many survey researchers have proposed diverse variants of the Warner randomized response model and applied their model to collect the information of sensitive questions. Using an optimal allocation, we proposed three-stage stratified randomized response technique which is an extension of the Kim and Elam (2005) two-stage stratified randomized response technique. In this study, we showed that the estimator based on the proposed response model is more efficient than Kim and Elam (2005). But by adding one more survey step to the Kim and Elam (2005), our proposed model may have relatively less privacy protection compared to the Kim and Elam (2005) model.

한국인 직무 스트레스 측정도구의 개발 및 표준화

장세진,고상백,강동묵,김성아,강명근,이철갑,정진주,조정진,손미아,채창호,김정원,김정일,김형수,노상철,박재범,우종민,김수영,김정연,하미나,박정선,이경용,김형렬,공정옥,김인아,김정수,박준호,현숙정,손동국 大韓産業醫學會 2005 대한직업환경의학회지 Vol.17 No.4

Background and Purposes: Over the past three decades, numerous studies performed in Korea have reported that job stress is a determinant risk factor for chronic diseases and work disability. Every society has its own culture and occupational climate particular to their organizations, and hence experiences different occupational stress. An occupational stress measurement tool therefore needs to be developed to estimate it objectively. The purpose of this study is to develop and standardize the Korean Occupational Stress Scale (KOSS) which is considered to be unique and specific occupational stressors in Korean employees. Subjects and Methods: Data were obtained from the National Study for Development and Standardization of Occupational Stress (NSDSOS Project: 2002-2004). A total of 12,631 employees from a nationwide sample proportional to the Korean Standard Industrial Classification and the Korean Standard Occupational Classification were administered. The KOSS was developed for 2 years (2002-2004). In the first year, we collected 255 items from the most popular job stress measurement tools such as JCQ, ERI, NIOSH and OSI, and 44 items derived from the a qualitative study (depth interview). Forty-three items of KOSS, in the second year, were retained for use in the final version of the KOSS by using Delphi and factor analysis. Items were scored using conventional 1-2-3-4 Likert scores for the response categories. Results: We developed eight subscales by using factor analysis and validation process: physical environment (3 items), job demand (8 items), insufficient job control (5 items), interpersonal conflict (4 items), job insecurity (6 items), organizational system (7 items), lack of reward (6 items), and occupational climate (4 items). Together they explained 50.0% of total variance. Internal consistency alpha scores were ranged from 0.51 to 0.82. Twenty-four items of the short form of the KOSS (KOSS-SF) were also developed to estimate job stress in the work setting. Because the levels of the subscales of occupational stress were gender dependent, gender-specific standard norms for both the 43-item full version and the 24-item short form using a quartile for the subscales of KOSS were presented. Conclusion: The results of this study suggest that KOSS might be an appropriate measurement scale to estimate occupational stress of Korean employees. Further and more detailed study needs to be conducted to improve the validity of this scale.

Proteomic Approach to Analyzing Flooding Stress in Soybean (Glycine max(L.) Merr.)

Kim,Tae-Seon,Cho,Seong-Woo,Lee,Jae-Eun,Kim,Yook-Han,Cho,Kun,Choi,Jong-Soon,Chung,Keun-Yook,Song,Beom-Heon,Jong,Seung-Keun,Kim,Hong-Sig,Woo,Sun-Hee 한국작물학회 2005 한국작물학회 학술발표대회 논문집 Vol.2005 No.-

로드셀을 이용한 고속 감자 중량계량법

김상철,임종환,김귀식,김성근,양종훈 제주대학교 공과대학 첨단기술연구소 2001 尖端技術硏究所論文集 Vol.12 No.2

Potatos, together with tangerines, are one of the major agricultural products in Jeju, and the production account for more than 30% of the domestic production. Recently some kinds of sorting machine for potatos are available, but they are not extensively used because their performance is not satisfactory and/or they are very expensive. This paper presents a load based high speed weighting method for sorting the potatos. This method is based on the fact that the linear momentum of a potato is proportional to the mass of it. The usefulness of the method is demonstrated with sets of experiments.

정전위 SSRT법에 의한 해양구조물용 Cu함유 고장력저합금강의 수소취성한계전위 규명에 관한 연구

김성종,박태원,심인옥,김종호,김영식,문경만 한국해양대학교 해양과학기술연구소 2001 硏究論文集 Vol.10 No.1

A marine structural material was well known to have high tensile strength, good weldability and proper corrosion resistance . Cu-containing high strength low alloy (HSLA) steel was recently developed for their purposes mentioned above, And the steel is free about preheating for welding, therefore it is reported that shipbuilding cost by using it can be saved more or less. However the marine structural materials like Cu-containing HSLA steel are being generally adopted with cathodic protection method in severe corrosive environment like natural sea water but the high strength steel may give rise to Hydrogen Embrittlement due to over protection at high cathodic current density for cathodic protection. In this study, Cu-containing HSLA steel using well for marine atructure was investigated about the susceptibility of Hydrogen Embrittlement as functions of tensile strength, strain ratio, fracture time, and fracture mode, etc. and an optimum cathodic protection potential by slow strain rate test(SSRT) method as well as corrosion properties in natural sea water. And its corrosion resistance was superior to SS400 steel , but Hydrogen Embrittlement susceptibility of Cu-containing HSLA steel was hider than that of SS400 steel. However Hydrogen Embrittlement of its steel by SSRT method was showed with pheonomena such as decreasing of fracture time. strain ratio and fracture mode of QC (quasi-cleavage) Eventually it is suggested that an optimum cathodic protection potential not presenting Hydrogen Embrittlement of Cu-containing of HSLA steel by SSRT method was from-770mV(SCE) to - 900mV(SCE) under natural sea water. (Received September 21, 2000)

생체분해성 망막압정을 이용한 망막고정에 대한 실험적 연구

김용백,민병무,김창식,박근성,김승영,길숙종,조항진,이성복,노승무,송규상,강대영,조준식,양준묵,정경수,최선웅,이진호,김학용,인현빈 충남대학교 의과대학 지역사회의학연구소 1998 충남의대잡지 Vol.25 No.1

Biodegradable retinal fixation devices obtain mechnical fixation of the retina with desirable chorioretinal scarring and with the potential for local, sustained release of antimetabolites and steroids to inhibit proliferative vitreoretinopathy. We manufactured a biodegradable retinal tack with barb that was designed in order to prevent intrusion from implantation of retinal tacks. This study was carried to evaluate the efficacy for retinal fixation and the capability for sustained release of drugs with a newly designed biodegradable retinal tack Biodegradable retinal tacks were made of polymers of glycolic acids and were designed with barbs in a shape to prevent the disinsertion. Biodegradale retinal tacks are divided into 3 parts, a conical portion that is inserted into the sclera, a cylinder portion that remains in the vitreous, and a neck portion between the pin and the cylinder. The tapered conical end was manufactured to allow easy insertion through the retina and choroid into the sclera. A cylinder portion was manufactured with a tapered angle that fixes firmly into the orifice of 19 gauge spinal needle. A neck portion, 0.4 mm in diameter, was designed to prevent disinsertion from following implantation of retinal tack. The applicator was a 19 gauge spinal needle and its orifice was prepared to 15°angle to accept the tapered cylinder portion of the retinal tack. The retinal tacks, secured in the needles, were passed through the formed vitreous and inserted into the retina, choroid, and sclera and were released by pushing the internal needle, usually within 2-3mm of the medullary ray of the posterior rabbit retina A retinal tack was placed in each of 8 pigmented rabbit eyes. Slit-lamp biomicroscopy, indirect ophthalmoscopy and fundus photography were performed periodically from 1 day to 8 weeks after surgery. Eight eyes were enucleated and studied by light microscopy at 8 weeks. Biomicroscopic evaluation of the animals revealed edemas adjacent to the retinal surfaces immediately after insertion of the biodegradable retinal tacks in all the animals. These edemas disappeared after 1 week. The first noticeable change in the size of retinal tacks was shown after 2weeks. The size of the retinal tacks gradually got smaller, decreasing to about one-half at 4 weeks and about one-third at 8 weeks. All retinal tacks remained in inserted places without any movement for an 8 week period. On light microscopy, epiretinal proliferations were seen to extend into the vitreous cavity. Cellular capsules that lined the inner aspect of the scleral defect caused by tack insertion were found. However the adjacent retina had a normal cytologic appearance and architecture in all specimens. We manufactured a biodegradable retinal tack that is designed to prevent intrusion from implantation of retinal tacks. All biodegradable retinal tacks reduce in size with time, but no retinal tacks extruded from the inserted place. The newly designed biodegradable retinal tack can be used for retinal fixation and may be used as a vehicle for the introduction of pharmacologic agents to prevent the cellular events that promote proliferative vitreoretinopathy.

국가 대표급과 제주도 고교 대표급 수영선수들의 그랩 스타트의 운동학적 분석

김철원,김승곤,오만원,임상용,김성찬,이창준,남사웅,이세형,류재청,신석종,김세민 濟州大學敎 體育科學硏究所 1998 체육과학연구 Vol.4 No.-

The purpose of the study was to undertaken to analysis the Grab starting technique between national representive team(3) and Cheju's representive team(3) with 3D cinematography. The conclusions obtained were as follows: Cheju's showed more elapsed time than national representive team on starting block. and more vertical than horizontal direction of COG position, more concentrated vertical velocity & acceleration than forward direction. Therefore It is necessory for cheju's to train balanced trust force in horizontal and vertical direction in grab starting technique.

DBD(Dielectric Barrier Discharges)에서 플라즈마 발생 해석

김종봉,신명수,김종호,김성영,이혜진 한국공작기계학회 2008 한국공작기계학회 춘계학술대회논문집 Vol.2008 No.-

DBD(Dielectric Barrier Dischages) plasma is often used to clean the surface of semiconductor. The cleaning performance is affected mainly by plasma density and duration time. In this study, the plasma density is predicted by coupled simulation of flow, chemistry mixing and reaction, plasma, and electric field. 13.56 MHz of RF source is used to generate plasma. The effect of dielectric thickness, gap distance, and flow velocity on plasma density is investigated. It is shown that the plasma density increases as the dielectric thickness decreases and the gap distance increases.

Trichloroethyene 처리한 흰쥐의 이물질 대사효소의 활성도에 관한 연구

김기웅,강성규,최병순,이종성,김종성,문영한 大韓産業醫學會 1994 대한직업환경의학회지 Vol.6 No.2

Trichloroethylene(TRI) is one of the most widely used organic solvent in many industries. It is used a degreasing agent, extract and dillution solvents. TRI is metabolized by liver microsomal cytochrome P450 to reactive intermediates, which are considered responsible for its hepatotoxicity. Cytochrome P450 is a key enzyme in the first step of TRI metabolism resulting in chloral hydrate(CH) formation, which is a rate-limiting step in TRI metalbolism. This study was performed to find change of hepatic cytochrome P$%) levels and of electron transport system for P-450 dependent reaction. Injections of TRI were done to the male Sprague Dawley rats(mean body wights, 170±10g) in corn the dosage of 150,300,600 ㎎/㎏ for 2 days. The results of experiments are following: 1. The contents of microsomal protein, cytochrome P450 and b5 are tended to be decreased with increasing amount of TRI, but not signifcantlly(p>0.05). 2. The activity of NADPH-cytochrome P450 reductase is slowly decreased by increasing amount of TRI, but not significantlly(p>0.05). On the other hand, the activity of NADH-b5 reductase is increased with increasing amount of TRI(p<0.05). 3. The activity of 7-ethoxyresolufin O-deethylase did not show any critical changes(P>0.05). This result suggests that the inductive pattern of TRI may not be related to P 450IA1 and P450IIB.