단일병원에서 관찰한 최근 10년간의 소아 우발사고에 관한 연구 : 이물흡인을 중심으로

김철민,송준영,김자형,김기수,홍수종 대한소아과학회 2002 小兒科 Vol.45 No.9

어깨 근막통 증후군에서 어깨 관절운동범위에 대한 분석

김정수,김인아,이수진,김용규,박시복,고재우,송재철 大韓産業醫學會 2005 대한직업환경의학회지 Vol.17 No.4

Objective: This study was carried out to investigate if the measurement of range of motion(ROM) could be applied in the diagnosis of Myofascial Pain Syndrome(MPS) and to determine the severity by analyzing ROM in MPS patients. Methods: The study subjects were 476 female telephone number information service workers. Southampton Protocol and Pittsburgh Protocol were used to diagnose MPS and to measure ROM. ROMs were measured by 2 inclinometers exercising each shoulder passively and actively in 5 directions ; abduction, forward flexion, extension, external rotation, and internal rotation. Results: Compared to the normal group (n=147), the mean of right side ROM in the subjects (n=270) with same side MPS was 2.1˚ (SD=11.5) lesser in active extension and 1.7˚ (SD=10.4) lesser in passive extension. Compared to the mild group (n=210), the mean of right side ROM in the patients with same side severe MPS (N=58) was lesser in all directions. Especially in active forward flexion, passive forward flexion, active extension, passive extension and active external rotation, ROM in the subjects with severe MPS was lesser by 6.5˚ (SD=13.1), 5.1˚ (SD=12.8), 5.9˚ (SD=11.8), 5.0˚ (SD=10.6) and 3.9˚ (SD=9.8), respectively, than those of the subjects with mild MPS. Compared to the subjects with left side mild MPS(n=172), ROM in the subjects with left side severe MPS (n=59) was 5.3˚ (SD=13.3) lesser in active forward flexion. Conclusions: In this study, ROMs in the subjects with severe MPS tended to be lesser than those in mild patients. This tendency was more prominent in the right side than the left, active range of motion than passive and forward flexion and extension than others. The results of this study are expected to help diagnose shoulder MPS and determine severity.

게우젓 製造에 關한 硏究(II) : 熱成중 呈味成分 및 組織學的 變化 Changes in Teste Compunds and Histological Properties during Fermentation

金成洙,河璡桓,姜永周,金洙賢,金永東,宋大鎭 제주대학교 1990 논문집 Vol.30 No.-

To evaluate the composition of Gae-Woo Jeot which is one of important traditional salted and fermented sea foods in Cheju Do, changes of nucleotides and their related compounds, free amino acids, TMAO(trimethylamine oxide), TMA(trimethylamine) contents and histological properties during fermentation was examined. AMP was as high as 3.6?mole/?? in raw small abalone but IMP content was only trace while hypoxanthine and IMP was dominant in raw topshell-4.5 mole/?? and 4.3??mole/?? respectively. Hypoxanthine was predominant in 65 days fermented Gae-Woo Jeot. Main amino acid in Gae-Woo Jeot were glycine, arginine, glutamic acid, alanine, valine and histidine in order. These were consisted 50~60% of the total free amino acid while phenylalanine, tyrosine, methionine and isoleucine were poor in content. During fermentation TMAO decreased slowly and eventually disappeard within 85 days while TMA was increased until 65 days and started to decrease down to 6~9mg%. Muscle texture showed the disappearance of elasticity soon after the adding of 10% salt while no change of texture was oberved until 50 days of fermentation in 20% salt group.

Kim,Seong-soo : Possiblity of Low Salting Process in Gae-Woo Jeot(Salted and Fermented Gastrophoda) and Changes in Fatty Acid Composition during Fermntation 低鹽化 可能性 檢討 및 熱成중 脂肪酸 組成의 變化

姜永周,河璡桓,金永東,宋大鎭,金洙賢,金成洙 제주대학교 1990 논문집 Vol.30 No.-

To establish the way of processing of Gae-Woo jeot which used abalone intestine that has not been systematically used compare to its characteristic taste and fame as main ingredient and to develop as a local tourist good, the change of constituents the quality of salted fish products suring Gae-Woo jeot fermentation were examined. The results are as follows. 1. In the organoleptic test, Gae-Woo jeot which fermented through 65 days were dominant and the group of 105 salkt concentration were better than that of 20%. It was the best of 10% salted products to add small abalone. Both law salted(10%) and high salted (20%) Gae-Woo jeot were similar in general constityents, nutrients and texture. 2. Compositions of highly unsaturated acid were farely high to 45.6% and 46.1% in small abalone added froup and top sheel added group respectively. during 3 months fermentation low decreasing rate of 3~4% was shown. EPA(eicosapentaenoic acid) was approximately 7~8% and DHA(docosahexaenoic acid) was extremely low to be less than 0.3%. 3. In the changes General composition and pH, pH was within range of 4~5.5, 9~12% in protein, 3~5% in total sugar, 0.5~1% in lipid and approximately 1% in ash. 4. Gae-Woo jeot can be made with 10% low salting method, and 10% group gets all the better for taste, small abalone adding is recommended. 5. When low salt fermented fish of 10% is processed, it is highly recommended to put sorbitol, ethyl alcohol, lactic acid or other humectant for better taste and longer storage and good quality food additives must be developed for tourist and presently applied mil ordering transportation must be sought.

판막 질환에서의 심근 섬유화 : 심근 조직을 이용한 형태학적 연구 및 혈청 생화학적 지표의 분석

강수진,박덕우,송재관,박경민,송종민,강덕현,한기훈,송현,이재원,주석중,송명근,김정선 대한순환기학회 2004 Korean Circulation Journal Vol.34 No.2

우리나라 지역 직업성질환 감시체계의 현황과 전망

임종한,장성실,김성아,문재동,채창호,홍윤철,김수영,김진석,김영욱,한상환,이혜숙,원종욱,송동빈,하은희,강성규 대한산업의학회 2001 대한직업환경의학회지 Vol.13 No.2

기존의 특수건강진단과 작업환경측정을 통한 직업병 관리가 진폐증, 소음성난청 등의 소수 특정질환에 국한되고 실제 직업병 발생 규모 파악이나 신종 직업병의 발견에 한계를 보인다는 사실은 산업의학전문가들 사이에서도 공감을 이루고 있다. 미국과 영국 등에서의 직업성질환 감시체계에 대한 경험은 우리 나라의 직업성질환 감시체계 구축에도 새로운 자극제가 되면서, 1998년이후 인천, 대전, 여천, 구미, 부울경 지역에서 지역 직업성질환감시체계를 산업보건관리의 중요한 시스템으로 구축하려는 노력이 확산되고 있다. 새로이 구축되어지는 이들 지역 직업성질환 감시체계는 감시하고자 하는 대상질환, 활용 가능한 인적자원 및 자료원, 지역 의료체계의 특수성 등에 따라서 목적과 방법을 달리하면서 독특한 형태로 발전을 하고 있다. 각 지역단위 감시체계들이 그 상황에 맞게 독특한 목적과 전략들을 발전 시키면서도, 향후 발전할 국가적인 차원의 직업성질환 감시체계 구축을 위하여 직업성질환 감시의 기본 전략 등을 공유하는 등의 노력이 필요하다. 환례 정의 및 기본적인 등록 서식의 공유, 직업성질환 감시 자료원의 발굴, 공동의 정보 네트워크 및 직업성질환 감시 데이터베이스 구축 등 직업성질환 감시활동을 지원하기 위한 여러 기초 인프라 구축에 힘을 모아야 할 것이다. 우리 나라에서 직업성질환 감시체계를 성공적으로 구축하기 위해서는 수집된 자료의 질 관리를 위한 직업성질환 감시의 원칙 제정과 감시 전략의 공유 등이 필요하며, 전국적인 직업성질환 감시체계의 하부구조라고 할 수 있는 지역감시체계의 기초 토대 마련과 강화작업이 절실하게 필요하다.

VP-16으로 성공적으로 치료된 위 Kaposi 육종 1예

양웅석,송근암,조몽,이재승,송철수,김형욱,김영민,이수봉,김태오,이성훈 대한소화기내시경학회 1999 Clinical Endoscopy Vol.19 No.4

The skin is an uncommon site of distant metastasis from any internal malignancy, and the incidence of metastatic skin lesions as the first symptom of disease is only 0.8% in patients with all systemic malignancies. Furthermore, cutaneous metastasis from adenocarcinoma of the stomach has been found to be extremely rare. A 35-year-old female patient was admitted due to multiple cutaneous nodules in her chest, abdomen, and back. A gastroendoscopic examination and biopsy was made according to the results of skin pathologic findings. Stomach and skin biopsy results revealed a signet ring cell type of adenocarcinoma. A case of gastric adenocarcinoma in which metastatic skin nodules appeared as the first sign of disease, is here in reported with a review of related literature.

Proportion And Characteristics Of Transient Nodules In A Retrospective Analysis Of Pulmonary Nodules

( Jin Yeong Yu ),( Su Young Chi ),( Hee Jung Ban ),( Yong Soo Kwon ),( In Jae Oh ),( Kyu Sik Kim ),( Yu Il Kim1 ),( Sung Chul Lim ),( Song Choi ),( Yun Hyeon Kim ),( Young Chul Kim ) 대한내과학회 2011 대한내과학회 추계학술대회 Vol.2011 No.-

카드뮴 장기간 투여에 따른 흰쥐의 신장내 카드뮴 축적량과 뇨중 배설량의 변화

송인순,조영채,김수영,박암,손경선,이태용,이동배 大韓産業醫學會 1997 대한직업환경의학회지 Vol.9 No.1

This study was performed to compare the cadmium accumulation levels in kidney with urinary cadmium excretion levels according to the duration of cadmium exposure in rats. Total 120 male rats, 6 weeks of age, were administered 0.5 mg/day of Cd to subcutaneously, intraperitoneally and orally 6 times per week for 12 weeks. The animals were sacrificed in the 1st day of 2nd, 4th, 6th, 8th, 10th and 12th week after beginning of cadmium administrations. Body weight, hematologic values, enzyme activities, renal Cd levels, urinary Cd and proteins were calculated and each value was compared according to the Cd administration routes. The Cd accumulation levels in the kidney of rats increased remarkably for 6-8th weeks which were experimented and urinary Cd excretion levels and urinary protein levels showed the tendency of increasing with the Cd accumulations in kidneys, especially in the subcutaneous injected rats. On the other hand, there was a significant positive correlation among the total Cd administration, the Cd accumulation in the kidneys, the urinary Cd excretion and protein.

Z-Map기법을 이용한 머시닝센터용 CAD/CAM기술에 관한 연구

송수용,양희구,김석일 한국항공대학교 1996 論文集 Vol.34 No.-

본 연구에서는 확장형 Z-Map모델을 토대로 3차원 제품의 형상설계에서 머시닝센터에 의한 CNC가공까지를 일괄적으로 처리할 수 있는 CAD/CAM시스템을 IBM PC와 Borland C++4.5를 이용하여 Windows환경에서 개발하였다. 3차원 제품의 형상은 기본 입체의 생성기능, 자유곡면형 입체의 생성기능, 평행이동, 회전스위프기능 등과 같은 입체정의기능, 그리고 스플리트기능, 불리안기능 등과 같은 입체조직기능을 통해서 쉽게 설계 및 구형할 수 있다. 또한 제품과 소재의 형상정보, 밀링공구의 제원, 그리고 절삭조건을 토대로 황삭가공과 정삭가공에 대한 공구경로의 자동생성, 머시닝센터용 CNC프로그햄의 자동생성, 시뮬레이션, 표면조도 확인 등과 같은 여러 가지 기능들을 갖추고 있다. 특히 과대절삭이 방지된 공구경로는 밀링공구의 제원과 절삭조건을 토대로 제품형상을 옵셋시켜서 생성한 CL Z-Map모델을 이용해서 도출하였다. In this paper, the extended Z-Map model based CAD/CAM system which is able to process systematically from the three dimensional shape design of products to the CNC cutting of products by the machining center, is realized on the Windows environment by using IBM PC and Borland C++4.5. The three dimensional shape of products can be easily designed and constructed by means of the solid definition functions such as the creation operation of primitives and solids with free-formed surfaces besides the translational and rotational sweep operations, and the solid manipulation functions such as the split operation and the Boolean operation. And the system has the various capabilities related to the automatic generation of tool path for the rough and finish cutting processes, the automatic elimination of overcut, the automatic generation of CNC program for a machining center, the cutting simulation, and the surface roughness evaluation of machined product. Especially the overcut-free tool path is obtained by using the CL Z-Map models which are composed of the offset surfaces of the geometric shape of product.