증폭(蒸曝)에 의한 지황(地黃)의 성분 변화에 대한 고찰

정재우 ( Jae Woo Jung ),김한영 ( Han Young Kim ),류지효 ( Ji Hyo Lyu ),김정훈 ( Jung-hoon Kim ) 대한본초학회 2021 大韓本草學會誌 Vol.36 No.6

Objectives : ‘Steaming and drying’ is a traditional processing method that has been used to produce Suk-ji-hwang (熟地黃; Rehmanniae Radix Preparata) from Ji-hwang (地黃, the fresh root of Rehmannia glutinosa Liboschitz ex Steudel; Rehmanniae Radix). The steaming and drying process, which is proceeded in heating and moisturizing conditions, plays a crucial role in the change of therapeutic effect of Ji-hwang, presumably due to the modification of its chemical constituents. In this article, the chemical influence of the ‘Steaming and drying’ process was investigated for understanding the underlying mechanism of chemical modification of Ji-hwang. Methods : The articles regarding the modifications of chemical constituents of Ji-hwang during the ‘Steaming and drying’ process were collected and analyzed to investigate the influence of the processing to Ji-hwang. Results : The results indicated that iridoid glycosides were degraded to their aglycones and sugars, and such degradations occurred faster at a high pressure than at an atmospheric pressure during the process. The contents of catalpol, ajugol, and acteoside were decreased, while those of rehmannioside A and D were slightly increased during the repeated processing. The contents of oligosaccharides, namely sucrose, maltose, raffinose, and stachyose (except for manninotriose), were decreased, while those of monosaccharides, glucose and fructose, were increased by the repeated processing. Conclusions : These results demonstrate that the ‘Steaming and drying’ process influenced the chemical constituents of Ji-hwang and provide probable basis for the therapeutic modification of Suk-ji-hwang after the processing of Ji-hwang.

임베디드 자바가상기계를 위한 클래스 ROMizer 설계 및 구현

지정훈,양희재 경성대학교 공학기술연구소 2004 공학기술연구지 Vol.11 No.-

Class file contains all necessary information required to run a Java program for Java virtual machine. However, it is found that the structure of Java class file is not as efficient in respect of both size and accessibility. Because embedded systems usually have low-performance processors and small amount of memory, it is not a good idea to store and access class files directly on embedded Java system in storage and performance viewpoint. In this paper, we present a design and implementation of the class ROMizer, a tool that allows Java class files to be pre-loaded in preparation for placing them into the ROM memory of an embedded Java application. The ROMizer produces a single binary image file from a multiple set of Java class files. The binary image file is more effient than class file in repect of both size and accessibility. The basic architecture of the ROMizer is presented and the performance and accessibility of the designed binary image file is analyzed in this paper.

응축형 복합레진의 기계적 성질에 관한 비교연구

정지아,문주훈,고영곤 대한치과보존학회 2001 Restorative Dentistry & Endodontics Vol.26 No.6

The purpose of this study was to compare the mechanical properties of three condensable composite resins and one hybrid composite resin. The compressive strength, diametral tensile strength, Vicker's microhardness were tested for mechanical properties of condensable composite resins (SureFil, Ariston pHc, Synergy compact), and hybrid composite resin (Z 100). The tested materials were divided into four groups : control group - Z 100 (3M Co, USA), experimental group I- Ariston pHc, (Vivadent, Co., Liechtenstein) , experimental group II - SureFil (Dentsply, Co., U.S.A.) , experimental group III- Synergy Compact (Coltene, Co., Swiss) . According to the above classification, we made samples of SureFil, Ariston pHc, Synergy Compact, Z 100 with separable cylindrical metal mold. And then, we measured and compared the value of compressive strength, diametral tensile strength and Vicker's microhardness of each sample. The results were as follows : 1. In compressive strength, control group (Z 100) revealed the highest value (398.85±19.61MPa), and followed by SureFil (381.65±31.24MPa), Synergy compact (354.85±12.22MPa), Ariston pHc (308.60±36.88MPa). There were no significant differences between SureFil group and Z 100 group, whereas there were significant differences between SureFil group and Ariston pHc group (P<0.05) . 2. In diametral tensile strength, Synergy compact revealed the highest value (86.54±3.44MPa) and followed by SureFil (84.54±3.53MPa), Z100 (76.91±1.63MPa), Ariston pHc(60.34±6.95MPa). There were no significant differences between SureFil group and Synergy compact group 3. In microhardness, control group (Z 100)revealed the highest value (223.7 ±58.0Hv), and followed by SureFil (117.5±10.2Hv), Ariston pHc (116.2±11.9Hv), Synergy Compact (101.9±10.8Hv). There were no significant differences between Ariston pHc group and Synergy compact group Key words : Condensable composite resin, Compressive strength Diametral tensile strength, Vicker's microhardness

축구선수의 Detraining과 Retraining이 혈청지질 및 호르몬농도에 미치는 영향

정정화,박재현,채종훈,성혜련,황지인,윤미숙,노금선,윤종관,윤영학,노순덕,정경숙,박일규,김은희,박현태,박상갑 대한스포츠의학회 1999 대한스포츠의학회지 Vol.17 No.1

The purpose of this study was to investigate the effects of detraining and retraining on serum lipid and hormones in soccer players. Subjects were seven male high-school soccer players. V˙O_2max was determined for each subjects by administering a treadmill test(initial speed: 90m/min, grade: 5%, increasing speed per 3 min: 30m/min). Serum lipid(T-C, TG, HDL-C LDL-C) and hormones(epinephrine, norepinephrine, growth hormones, cortisol) were assayed pre and post detraining in 10, 20, 30 days after retraining. The repeated ANOVA was used to determine significant differences. The 0.05 level of significance was as critical level for the study. The results of the study were as follows: 1. V˙O_2max(ml/min) were 3576.3±204.2ml/min pre detraining, 3234.1±198.9 ml/min post detraining. There are significant(p<.05) difference between pre and post detraining. In 10, 20, 30 days after retraining, V˙O_2max(ml/min) were 3601.4±170.9 ml/min. There were significantly(p<.05) increased in retraining periods. 2. V˙O_2max(ml/kg/min) were significantly(p<.05) decreased from 62.3±2.9 ml/kg/min to 55.9±4.7 ml/kg/min in detraining. In 10, 20, 30 days after retraining, V˙O_2max(ml/kg/min) were 62.4±3.4ml/kg/min, 62.7±2.3ml.kg/min, 67.3±7.2ml/kg/min respectively. There were significantly(p<.05) increased in retraining periods. 3. T-C were significantly (p<.05) increased from 166.6±8.5mg/dl to 175.3±10.3 mg/dl in detraining. In 10, 20, 30 days after retraining, T-C were 160.1± 3.2mg/dl, 156.7±3.7mg/dl, 140.3±9.0mg/dl. There were significantly(p<.05) decreased in retraining periods. 4. HDL-C were 61.4±6.6mg/di pre detraining, 5.3±6.6mg/dl post detraining. There are significant(p<.05) difference between pre and post detraining. In 10, 20, 30 days after retraining, HDL-C were 56.9±7.1mg/dl, 56.4±9.2mg/dl, 57.7±9.1mg/dl respectively. There were no significant difference in retraining periods. 5. The hormones(epinephrine. norepinephrine, growth hormone, cortisol) were changed as same patterns. Epinephrine were 26.0±7.0[g/ml pre detraining, 24.6±3.2pg/ml post detraining. In 10, 20, 30 days after retraining, epinephrine were 26.9±5.6pg/ml, 30.6±6.2pg/ml, 29.4±5.6pg/ml respectively. There were no significant difference in retraining periods. In conclusion, HDL-C, epinephrine, norepinephrine, growth hormone and cortisol were decreased, T-C, LDL-C and TG were increased in detraining. But HDL-C, epinephrine, norepinephrine, growth hormone and cortisol were increased, T-C, LDL-C and TG were decreased in retraining.

바나듐계 촉매막 반응기의 특성

정지훈 경기대학교 1996 論文集 Vol.38 No.2

The selective oxidation of butene to maleic anhydride was carried out in a V_(2)O_(5) coated membrane reactor. From the V_(2)O_(5) sol prepared by fusing and melting, the V_(2)O_(5) coated membrane without crack was made on the support. The mean pore diameter and pore volume of the prepared membrane were 30 Å and 0.05cc/g respectively. When the V_(2)O_(5) coated membrane was heated to 450℃ the charge was transfered from O^(2-) to V^(5+) at around 500nm, and V_(2)O_(5) [010] plane which was important site in the selective oxidation reaction was grown selectively. The maximum selectivity was 95%, and this result shows that the V_(2)O_(5) coated membrane reactor is very efficient for the selective oxidation.

상악 제2유구치와 상악 제1대구치의 치관 형태: 치아계측학적 연구

김지인,현홍근,김영재,김정욱,장기택,이상훈,한세현,김종철 大韓小兒齒科學會 2011 大韓小兒齒科學會誌 Vol.38 No.4

The basic structure of the primary crowns usually resemble their succeeding permanent teeth. However, maxillary second primary molars resemble ipsilateral first permanent molars. Accordingly in this study, odontometric data of the two teeth was obtained, then analyzed to verify the morphological relationship and sex difference between the two teeth. Dental study casts were examined for their mesiodistal and buccolingual width of the crowns, diameter of each cusps, and intercuspal distances. Photographs of the crowns were taken to measure the angles between each cusp tip. The results are as follows : 1. In boys, PrI, PaI, DBC angle, and MBC angle did not show any statistically significant difference between the two teeth(p>0.05), and moderate level of correlations were observed. 2. In girls, crown index, DBC angle, and MBC angle of the two teeth did not show any statistically significant difference(p>0.05), and moderate level of correlations were recognized. 3. Measurements that did not show statistically significant difference between the two teeth in both boys and girls were DBC angle and MBC angle(p>0.05). In DLC angle, however, statistically significant difference was observed(p<0.01). 4. Most of the measurements showed sex differences, except DBC angle, which did not show any sex difference in both teeth(p>0.05). 유치 치관의 기본적인 구조는 대개 계승 영구치를 닮는다. 그러나 제2유구치는 계승 영구치인 제2소구치보다 오히려 제1대 구치와 더 유사한 경향이 있다. 이에 본 연구는 한국인에서 상악 제2유구치와 제1대구치의 치아계측학적 자료(odontometric data)를 얻어 두 치아의 형태와 크기 사이의 연관성을 살펴보고, 나아가 남녀간의 차이점 유무를 고찰해 보고자 하였다. 남아 150명, 여아 150명 총 300명의 모형을 이용하여 상악 제2유구치와 상악 제1대구치의 근원심 치관 폭경, 협설측 치관 폭경, 각 교두의 직경, 교두정간 거리를 계측하였고, 치관의 교합면 사진을 촬영하여 각 교두정 사이의 각도를 측정하여 다음과 같은 결과를 얻었다. 1. 남아에서 Protocone index, Paraconeindex, Distobuccal cusp(DBC)각, Mesiobuccal cusp(MBC)각은 상악 제1대 구치와 제2유구치 사이에 통계적 유의차가 관찰되지 않았고(p>0.05), 중등도의 상관관계가 확인되었다. 2. 여아에서 crown index, Distobuccal cusp(DBC)각, Mesiobuccal cusp(MBC)각은 상악 제1대구치와 제2유구치 사 이에 통계적 유의차가 관찰되지 않았고(p>0.05), 중등도의 상관관계가 확인되었다. 3. 남, 여 모두에서 Distobuccal cusp(DBC)각, Mesiobuccal cusp(MBC)각은 두 치아 사이에 유의할만한 차이를 보이 지 않았고(p>0.05), Distolingual cusp(DLC)각에서는 통계적 유의차가 관찰되었다(p<0.01). 4. 대부분의 계측치에서 남녀 차이를 나타냈지만, Distobuccal cusp (DBC)각은 상악 제1대구치와 제2유구치 모두에서 남녀 차이를 보이지 않았다(p>0.05).

ZnO:AI 과 ITO 투명전도막을 이용한 플랙시블 DSCs의 변환효율 특성

정기영,김지훈,성열문,곽동주,추영배 경성대학교 공학기술연구소 2010 공학기술연구지 Vol.16 No.-

In order to investigate the possible application of ZnO films as a transparent conducting oxide (TCO) electrode for film-typed dye sensitized solar cell(F-DSC), ZnO:Al films were prepared by RF magnetron sputtering method. The effects of gas pressure on the structural and electrical properties of ZnO films were mainly studied experimentally. F-DSC using either a ZnO:Al or indium tin oxide (ITO) electrode were also fabricated separately under the same manufacturing conditions. The electro-optical conversion efficiency and fill factor of the F-DSCs using both ZnO:Al and ITO transparent conducting electrodes were measured and compared with each other. ZnO:Al films showed the minimum resistivity of 2.6 x10^(-3)Ω-cm and a transmittance of 91.7% under the experimental conditions of doping concentration of 2 wt% of Al₂0₃ and gas pressure of 5mTorr. ITO films fabricated at 5mTorr of gas pressure also showed the minimum resistivity of 1.5x10^(-3)Ω-cm and transmittance of 92.1%. Although the electrical resistivity of ZnO:Al is higher than that of ITO, the conversion efficiency of F-DSC using ZnO:Al was comparable with that of F-DSC using ITO. The conversion efficiency of F-DSCs using ZnO:Al and ITO electrodes are about 2.8% and 2.9%, respectively.

성장기 아동의 single tooth scissors bite의 교정 치료: 증례 보고

김지인,현홍근,김영재,김정욱,장기택,이상훈,한세현,김종철 大韓小兒齒科學會 2011 大韓小兒齒科學會誌 Vol.38 No.4

A scissors bite in the posterior teeth occurs when the upper teeth are positioned totally buccal to the lower teeth in centric occlusion, either unilaterally or bilaterally. This malocclusion can result from either excessive width of the maxilla or deficient width of the mandible, or sometimes combination of the both. Scissors bite, when left untreated without a proper dental intervention, interferes with the normal mandibular growth leading to a state where consequent disharmony in dental arch width evokes occlusal disturbances. Therefore, early preventive orthodontic treatment is necessary in patients with scissors bite. Scissors bite rarely involves anterior and posterior sites concuttently across the dental arch but usually affect single tooth. Even in the single tooth scissors bite cases, more likely to be met in the clinical fields, immediate dental intervention is indicated because continuous occlusal forces that exacerbate the already adverse axis of the posterior teeth. In this case study, patients with single tooth scissors bite, each 7, 14, 12, and 16 years old, were each treated with criss-cross elastic, fixed appliance, removable appliance, and miniscrews. With the proper selection of appliances appropriate to each specific cases, good treatment outcome can be achieved without resulting any side effects. 중심교합위의 상태에서 편측 혹은 양측으로 상악 구치부의 치아가 하악 구치부의 협측으로 위치한 경우를 scissors bite라 고 한다. 이는 상악의 폭경이 크거나 하악의 폭경이 좁은 경우 발생한다. Scissors bite의 경우 방치하게 되면 하악의 성장이 방해받게 되고 그 결과, 악궁 폭경의 부조화가 심해져 저작 장애를 일으킬 수 있으므로 조기 차단 교정이 반드시 필요하다. 실제 임상에서는 여러 치아의 scissors bite보다 최후방 구치 혹은 그 외 하나의 구치만의 single tooth scissors bite(STSB)을 보이는 경우가 많다. 이러한 STSB의 경우도 방치하게 되면 저작력으로 인하여 구치의 각도가 더욱 악화되므로 즉각적인 치료가 필요하다. 본 증례에서는 STSB를 보이는 7세, 14세, 12세, 16세의 환자에게 각각 criss-cross elastic, 고정성 장치, 가철성 장치, miniscrew를 사용하여 치료한 증례를 보고하였다. 각 환자의 증례에 적합한 장치를 잘 선택하여 사용한다면 치아를 정출시키는 등의 부작용을 야기하지 않고 양호한 결과를 얻을 수 있을 것이다

珍島産 枸杞의 部位別 지방산 및 아미노산 組成

정지흔,강성훈 全南大學校 農漁村開發硏究所 1992 農業科學技術硏究 Vol.27 No.-

진도산 구기의 부위별 지방산및 마미노산 조성을 분석한 결과는 다음과 같다. 전지질에 대한 지방산 조성은 구기자는 필수지방산인 linoleic acid 가 총지방산함량 중 76.8%로 매우 높았으나 linolenic acid 는 미량 검출되었고, 구기엽은 linolenic acid 함량이 41.5% 로 가장 높았으며 oleic acid가 미량 검출되었다. 지골피는 포화지방산인 palmitic acid가 40.8% 로 가장 높았다. 아미노산 조성은 구기자 Glu 가 1.64% 로 가장 높았으며 His, Arg,Leu 등의 순으로 함유되어 있었고, 구기엽은 Leu이 1.26%로 가장 높았으며,지골피는 Glu가 0.79%로 가장 높았다. 유리아미노산 의 총함량은 구기자가 1.5%로서 총유리아미노산에 대한 필수아미노산의 조성비가 24.3%였고, 구기엽과 지골피의 경우는 총유리 아미노산 함량이 약 450mg%로 비슷하였으며 열매에 비해서는 크게 낮은 수준이었으나 지골피는 필수 아미노산이 차지하는 비율이 29.0%로 열매나 잎보다 높은 결과를 나타내었다. Fatty acid and amino acid composition in fruits, leaves and roots of Lycium chinese Mill were analyzed. Major fatty acid in fruit lipid was 76.8% linoletic acid while linolenic acid was trace. Also, major fatty acid in leaves was 41.5% linolenic acid and that of roots was 40.8% palmitic acid. Amino acids were 12.2% in fruits, 13.7% in leaves and 8.3% in roots. Among them, Glu, His, Arg Leu in fruits were abundant while Leu in leaves was 1.3g%,the highest. Free amino acids in fruits were 1.5% and essential amino contents was 24.3%. There was no great difference in free amino acids between leaves and roots while the ratio of essential amino acids in roots was 29.0% which is higher than that in fruits and leaves.

동계 난방시 구조체 축열 공조시스템의 축·방열 특성에 관한 연구

임지훈,이시환,차영호,정광섭,이정재 대한건축학회 2003 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.23 No.1

It is the plan that storage gets energy done by in structure with what thermal storage of structure changes only supply air duct among the existing HVAC system, and a basic principle coordinates the damper that it was installed makeup air in supply air duct like former HVAC system to an inside at supply and a night by day, and do makeup air supply with in ceiling space of thermal storage of structure HVAC system. This thermal storage of structure HVAC system uses the existing utility system, and energy saving can get structure of building done with energy storage, before air conditioning and peak load cut getting day heat load done.