BTX 공정에서 Gas Detector Mapping 적정성 검토에 관한 연구

서지혜,한만형,김일권,천영우,Seo, Ji Hye,Han, Man Hyoeng,Kim, Il Kwon,Chon, Young Woo 한국안전학회 2017 한국안전학회지 Vol.32 No.5

In order to prevent major and chemical accidents, some of the plants which would like to install and operate hazard chemicals handling facilities must submit Off-site Consequence Analysis due to recent arisen leak accidents since 2015. A lot of chemical industrials choose gas detectors as mitigation equipment to early detect gas vapor. The way of placement of gas detectors has two methods; Code-based Design(CBD) and Performance-based Design. The CBD has principles for gas detectors to be installed with consideration for the place that is expected to accumulate gas, and the leak locations according to legal standards and technical guidelines, and has a possibility to be unable to detect by these rules to locate gas detectors by vapor density information. The PBD has two methods; a Geographic Method and Scenario based Method. The Scenario-based Method has been suggested to make up for the Geographic Coverage Method. This Scenario-based Method draw the best optimum placement of gas detectors by considering leak locations, leak speed information, leak directions and etc. However, the domestic placement guidelines just refers to the CBD. Therefore, this study is to compare existing placement location of gas detectors by the domestic CBD with placement locations, coverages and the number of gas detectors in accordance with the Scenario-based Method. Also this study has measures for early detecting interest of Vapor Cloud and suitable placement of gas detectors to prevent chemical accidents. The Phast software was selected to simulate vapor cloud dispersion to predict the consequence. There are two cases; an accident hole size of leak(8 mm) from API which is the highst accident hole size less than 24.5 mm, and a normal leak hole size from KOSHA Guide (1.8 mm). Detect3D was also selected to locate gas detectors efficiently and compare CBD results and PBD results. Currently, domestic methods of gas detectors do not consider any risk, but just depend on domestic code methods which lead to placement of gas detectors not to make personnels recognize tolerable or intolerable risks. The results of the Scenario-based Method, however, analyze the leak estimated range by simulating leak dispersion, and then it is able to tell tolerable risks. Thus it is considered that individuals will be able to place gas detectors reasonably by making objectives and roles flexibly according to situations in a specific plant.

가감청영탕(加減淸營湯)에 효과를 보인 열성 아토피 피부염 환자 6례 증례 보고

서지혜,정창환,박선정,임소영,한수련,Seo, Ji-Hye,Jung, Chang?Hwan,Park, Seon-Jeong,Lim, So-Young,Han, Su-Ryun 대한한방안이비인후피부과학회 2014 한방안이비인후피부과학회지 Vol.27 No.3

Objective : The purpose of this study is to investigate the effect of Gagamchengyoung-tang($Ji\bar{a}ji\check{a}nq\bar{i}ngy\acute{i}ng-t\bar{a}ng$) for atopic dermatitis patients diagnosed as the febrile tendency. Method : This case study was done on 6 atopic patients with febrile tendency who have visited Korean Medicine Clinic from 2013.08.01. to 2014.04.30.. Gagamchengyoung-tang($Ji\bar{a}ji\check{a}nq\bar{i}ngy\acute{i}ng-t\bar{a}ng$) was prescribed to all 6 patients and evaluated the symptom change through photographs and questionnaire. Objective SCORAD Index(OSI) was used to evaluate the objective symptom and VAS was used to evaluate the subjective change. Results & Conclusion : The Objective SCORAD index and VAS were decreased in all patients. The average OSI reduction score was 26.3. Most symptoms of 6 patients were improved. Gagamchengyoung-tang ($Ji\bar{a}ji\check{a}nq\bar{i}ngy\acute{i}ng-t\bar{a}ng$) can be effective in patients who were diagnosed as febrile tendency.

케이슨방파제 부착 OWC-MB 복합형 파력발전시스템 성능해석

서지혜,박우선,이중우,Seo, Ji Hye,Park, Woo-Sun,Lee, Joong Woo 대한토목학회 2015 대한토목학회논문집 Vol.35 No.3

기존 케이슨방파제 외해 측에 수로를 설치하고 수로 내에 부유체를 설치한 파력발전시스템에 대해서 연구하였다. 이 시스템은 중복파를 기진력으로 활용하고, 수로 내 수주와 부유체의 공진현상을 이용하여 에너지 추출효율 극대화할 목적으로 제안되었다(Park et al., 2014). 선형파 이론에 기초한 Galerkin 유한요소 모델(Park, 1991)을 이용하여 제안된 발전시스템의 성능을 평가한 결과, 기존의 타 시스템에 비하여 우수한 발전효율을 보임과 수로 내 수주의 공진현상이 성능에 지배적인 영향을 미침을 확인하였다. 또한, 수로와 부이 주변에서 발생하는 유체 점성감쇠가 발전효율에 미치는 영향이 커 이를 최소화하는 노력이 필요한 것으로 평가되었다. Wave energy harvesting system using OWC(Oscillating Water Column) and MB (Movable Body) attached at the caisson breakwater was studied. This system was suggested to maximize wave energy extraction using resonant phenomena of oscillating water column and buoy in wave channel (Park et al., 2014). Not only incident waves but also reflected waves from the breakwater can be used as sources of exciting force for harvesting wave energy efficiently. Using Galerkin finite model based on the linear wave theory (Park, 1991), the performance of the system was evaluated for various damping ratios of power take off system. Numerical results show that the proposed system is excellent in efficiency compared with that of conventional system and the performance of the system is governed by the resonance of oscillating water column in the wave channel. In addition, the additional efforts to minimize viscous damping was found to be necessary because viscous damping occurring in the channel and around the moving buoy is significant in generation efficiency.

일개 대학병원에서 출생 초기 경미한 호흡곤란을 주소로 전원된 신생아의 임상경과 및 진단

서지혜,이규호,이은실,Seo, Jee Hyue,Lee, Kyo Ho,Lee, Eun Sil 영남의대학술지편집위원회 2014 Yeungnam University Journal of Medicine Vol.34 No.1

Background: This study was conducted to investigate the epidemiological features, clinical courses, and diagnoses of neonates who are transferred to neonatal intensive care unit of Yeungnam University Hospital due to tachypnea soon after birth. Methods: Based on medical records, we performed a retrospective study of neonatal intensive care unit admissions due to tachypnea from January 2010 to December 2013. Results: A total of 311 neonates were included in this study. The patient characteristics showed male predominance at 2.65:1. Among the 311 neonates with tachypnea, 127 (40.8%) neonates needed oxygen supply, and 54 (17.4%) neonates needed assisted mechanical ventilation. Transient tachypnea of the newborns (TTN) (158, 50.8%) showed the highest incidence, followed by pneumonia (63, 20.3%), extrapulmonary infection (37, 11.9%), respiratory distress syndrome (21, 6.8%), air leak (16, 5.1%), meconium aspiration syndrome (12, 3.9%), congenital heart disease (5, 1.6%), metabolic acidosis (3, 1%), primary pulmonary hypertension of newborns (2, 0.6%) and anemia (2, 0.6%). Conclusion: Although the neonates with tachypnea showed no other respiratory distress symptom, clinicians should be aware of the possibility of other pulmonary diseases as well as TTN and their extra-pulmonary causes. If tachypnea does not improve within a few hours, the clinician should consider further evaluation and management as soon as possible.

화재 시나리오에 따른 철근콘크리트 해중터널의 손상도 분석

서지혜,한택희,박우선,한상훈,원덕희,Seo. JiHye,Han. Taek Hee,Park. Woo-Sun,Han. Sang-Hun,Won. Deok Hee 한국방재학회 2014 한국방재학회논문집 Vol.14 No.4

해중터널에 있어서 내화성능은 매우 중요하다. 만약 해중터널에 화재가 발생하였을 경우 온도하중에 의하여 큰 손상이 발생할 것이다. 이러한 국부적인 손상은 시스템 붕괴로 이어질 수 있다. 이러한 이유로 해중 터널의 내화성능은 반드시 정립되어야 한다. 해중터널의 내화성능을 제시하기 위해서는 다양한 화재조건에서 해중터널이 어떠한 손상 및 거동을 보이는지가 검토되어야 한다. 이에 본 논문에서는 다양한 화재 조건에서 해중터널이 어떠한 손상이 발생하는지에 대한 기초 연구를 수행하였다. 기존에 제시된 화재 시나리오를 이용하여 화재를 가정하였으며, 그에 따른 손상정도를 검토하였다. 본 연구는 향후에 해중터널의 내화기준을 수립하는 기초 연구 자료를 사용될 것이다. Fire resistance performance of the SFT (Submerged Floating Tunnel) is important one of the various researches. If fire break out in SFT, it is damaged by thermal loads. The damage of the SFT varies by type of fire. Structure of the SFT is able to collapse partially by fire scale and fire exposure time. For this reason, fire resistance design of the SFT must be suggested. Fire resistance performance of SFT could be investigating for fire resistance design of SFT. Fire condition could be expressed fire curves which are suggested by fire scale and fire exposure time. In this paper, temperature distributions of the SFT were investigated through FE analysis under various fire scenarios. Heat transfer analysis was applied to investigate conduction of heat by fire. And there was to draw the biggest influence fire condition to the SFT from FE analysis results. Also, preliminary study was performed for fire resistance design.

변화하는 혈압의 영향을 받지 않는 동맥 벽의 강화도 측정 방법 제안 : 대동맥 확장지수

서지혜,최동호,오수경,이종민,Seo, Jee-Hye,Choi, Dong-Ho,Wu, Zhuqing,Rienmueller, Rainer,Lee, Jong-Min 대한의용생체공학회 2008 의공학회지 Vol.29 No.2

To evaluate aortic wall stiffness without influence of different background blood pressure, a new technique was developed and verified. At eight swine descending aortae, volume-pressure measurement was performed using custom-made system. Based on averaged pressure-volume curve, aortic distensibility index was formulated to evaluate aortic wall stiffness regardless of variable blood pressure and aortic size. The variability of aortic distensibility index by pressure change was compared with other parameters for wall stiffness evaluation. Subsequently, the aortic distensibility index was calculated at 100 contrast-enhanced EBCT data sets of normal volunteers in regular health screening program. The measured aortic distensibility index was compared with age, coronary calcium score, and aortic calcium score. Between 50 and 360 mmHg of blood pressure, the coefficient of variance of aortic distensibility index was 22.00% as comparing with 88.99% of classical compliance. Based on age, aortic distensibility index showed correlation coefficient of 0.55, whereas classical compliance showed 0.26. The correlation coefficient with modified aortic calcification was 0.43. Linear regression study revealed statistical significance of correlation coefficients. The aortic distensibility index, the method to evaluate aortic wall stiffness free from variable blood pressure and aortic size, was developed and verified with significant practical feasibility.

폐슬러지로부터 섬유형 생체흡착제 제조방법의 최적화

서지혜(Ji Hae Seo),김남규(Nam Gyu Kim),박문식(Mun Sik Park),이선경(Sun Kyung Lee),박동희(Dong Hee Park) 大韓環境工學會 2014 대한환경공학회지 Vol.36 No.9

본 연구에서는 폐기물 처리에 어려움을 겪고 있는 폐슬러지를 원료로 사용하여 섬유(fiber) 형태의 생체흡착제를 제조하였다. 유기성 오염물의 용출 문제 및 처리수의 고액분리 문제를 해결하기 위하여 Ca-alginate를 이용해 폐슬러지를 고정화하였으며, 제조의 용이성 및 흡착제로써의 성능을 향상시키기 위하여 섬유 형태로 생체흡착제를 제조하였다. Alginate 사용량을 최소화 하면서 제조한 생체흡착제의 성능을 최대화 하기 위한 고정화 조건은 alginate 농도 10 g/L, 폐슬러지 농도 40 g/L, 생체흡착제 직경 0.3~0.4 mm로 결정하였다. 제조한 섬유형 생체흡착제는 2가 양이온 중금속인 Cd(II)에 대해 60.73 mg/g의 최대흡착량을 보였으며, Cd(II) 흡착 거동은 Psuedo-second-order 속도모델과 Langmuir 등온흡착모델로 잘 설명되었다. 결론적으로, 하폐수 처리공정에서 발생하는 폐슬러지는 생체흡착제를 제조하는데 사용될 수 있는 저렴한 원료이며, 이렇게 제조한 생체흡착제는 산업폐수에 함유된 유독성 중금속을 효율적으로 제거하는데 사용될 수 있다. In this study, sludge waste which has a difficulty in treating it was used to manufacture a fiber type of biosorbent. To solve the problems such as the release of organic pollutants and the difficulty in separating solid from treated water, entrapment method using Ca-alginate was used to immobilize sludge waste. Considering ease of manufacture as well as improvement of adsorptive ability, the biosorbent was manufactured in the form of fiber type. Optimum immobilization condition for minimizing the amount of alginate used and maximizing the performance of biosorbent was determined to be 10 g/L alginate concentration, 40 g/L sludge concentration, and 0.3-0.4 mm fiber diameter. The maximum Cd(II) uptake of the biosorbent was 60.73 mg/g. Pseudo-second-order kinetic model and Langmuir isotherm model adequately described the dynamic and equilibrium behaviors of Cd(II) biosorption onto the biosorbent, respectively. In conclusion, sludge waste generated from wastewater treatment process is a cheap raw material for the manufacture of biosorbent which can be used to remove toxic heavy metals from industrial wastewaters efficiently.

니딩 처리 시 지료농도에 따른 활엽수표백크라프트펄프의 섬유특성 변화

서지혜(Ji-Hye Seo),최경화(Kyoung-Hwa Choi),조병욱(Byoung-Uk Cho) 한국펄프·종이공학회 2015 펄프.종이기술 Vol.47 No.4

In this study, effects of kneading concentration on characteristics of hardwood bleached kraft pulp (HwBKP) fibers were elucidated. A laboratory two-shaft kneader was utilized for kneading. Kneading concentration was varied in the range of 15-30% (w/w) and the number of kneading treatment was adjusted between 0 and 6 passes. It was found that kneading concentration influenced fiber characteristics. At 15% of pulp concentration, fiber length slightly increased with increasing the number of kneading passes, while other morphological properties such as fiber width and curl decreased: fiber straightening occurred. In addition, the increase in WRV and the decrease in CSF were the largest at 15% kneading concentration, meanings that fibrillation mainly occurred. In contrast, at higher kneading concentration exceeding 20%, fiber deformation like curl was mainly occurred. Also, at kneading concentration of 20% and 30%, fiber length decreased with the number of kneading passes while other morphological properties such as fiber width, and WRV increased. Severe fiber entanglement was found at 30% kneading, which shall be removed during papermaking.

무가와 판소리의 엇모리형 장단의 리듬분석

서지혜(Seo Jihye) 한국예술종합학교 한국예술연구소 2020 한국예술연구 Vol.- No.27

과학-기술-사회 관련성에 대한 이해 촉진을 위한 초등 과학 모듈의 개발 및 적용 : 신문 기사 활용 수업에 대한 학생들의 인식과 흥미 조사 Students` Perception and Interest of News Article-Based Lessons

서지혜 ( Ji Hye Seo ),이용복 ( Yong Bok Lee ),장신호 ( Shin Ho Jang ) 한국초등과학교육학회 2008 초등과학교육 Vol.27 No.1