RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 음성지원유무
        • 원문제공처
          펼치기
        • 등재정보
          펼치기
        • 학술지명
          펼치기
        • 주제분류
          펼치기
        • 발행연도
          펼치기
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        판상형 충전제의 함량과 배향에 따른 PP복합체의 영률 변화 연구

        서상범(Sang Bum Seo),이용현(Yong Hyun Lee),정선경(Sun Kyoung Jeong),이승구(Seung Goo Lee),이기윤(Kee Yoon Lee) 한국고분자학회 2012 폴리머 Vol.36 No.2

        이 논문은 판상형 충전제의 함량과 배향에 따라 폴리프로필렌 복합체의 영률 변화에 미치는 영향을 연구 하였다. 이론적인 예측은 Lee와 그의 연구자들에 의해 제안된 두 개의 종횡비, ρα=a1/a3과 ρβ=a1/a2 를 이용하여 3차원 타원체의 형상을 계산하였고 실험값과 비교 분석하였다. 판상형 충전제로 운모와 탈크를 사용하였다. 충전제의 형태는 SEM을 이용해 관찰하였고, 종횡비는 고분자의 흐름을 기준으로 좌표축을 설정하여 통계적 방법으로 계 산하였다. 충전제가 운모인 경우에 ρα=13.5와 ρβ=1.8이었고, 탈크의 경우는 ρα=3.8과 ρβ=1.4이었다. 또한 충전제 의 2개의 종횡비와 함량이 기계적 물성에 미치는 영향을 실험적으로 연구하였다. 운모의 경우 30 wt% 함량일 때 E11이 약 2.7배 향상되었다. 탈크의 경우는 E11이 약 2.3배 향상하였다. This paper studied the effects of the content and the orientation of the disk shape fillers on the modulus of PP composites. The experimental results were compared with the theoretical calculations which included the three dimensional ellipsoids and analyzed by two aspect ratios, ρα=a1/a3 and ρβ=a1/a2 proposed by Lee and his researchers. Mica and talc were used as disk shape fillers in the composites. The shapes of mica and talc were observed by SEM and aspect ratios were statistically calculated. For the case of mica, the average aspect ratios were ρα=13.5 and ρβ=1.8, and for the case of talc, they were ρα=3.8 and ρβ=1.4. Also, the effects of two aspect ratios and the content of filler on the mechanical properties were studied: For 30 wt% of mica, E11 increased up to about 2.7 times, and for the other case of talc, E11 increased up to about 2.3 times, respectively.

      • 冷血動物(개구리)에서 日本腦炎 바이러스의 抗體보유에 관한 硏究

        이연태,기영진,김광현,최성학,홍장선 단국대학교 신소재기술연구소 1993 신소재 Vol.3 No.-

        일본뇌염 바이러스는 극동지방에서 여름철에 Culex tritaeniorhynchus 홍모기를 매개로 사람과 가축에 감염되여 질병을 유발하고 치명적인 결과를 초래하는 무서운 바이러스 질환의 원인체이다. 그동안 끊임없는 연구결과로 1970년 후반부터 일본뇌염 환자발생이 현저하게 감소하였다. 그러나 자연계에서 일본뇌염 바이러스의 생태학적 규명은 아직도 연구되어야 할 과제들이 산적되어 있다. 따라서 이 바이러스의 보유동물에 대한 자연계의 생활환경에 관한 연구가 필요하여 개구리의 항체보유여부를 규명 하였다. 6개도의 야외에서 채집한 개구리 681마리 혈청에 대하여 HI 방법에 의한 항체 분석을 시행하여 다음과 같은 결과를 얻었다. 1. 개구리 총 681마리의 일본뇌염바이러스에 대한 HI항체 보유율은 9.83%였다(p<0.01). 2. 일본뇌염바이러스에 대한 성별 HI 항체 보유율은 수컷이 2.63%(531마리 중 14마리). 암컷이 35.33%(150마리 중 53마리)로 암컷이 약 13배 높은 항체보유율을 나타냈다(p<0.01). 3. 종류별 HI항체 보유율은 북방산 개구리가 100%(1마리 중 1마리), 산개구리 66.66%(3마리 중 2마리), 금개구리 50.00%(36마리 중 18마리), 옴개구리 33.33%(6마리 중 2마리), 참개구리 6.92%(635마리 중 44마리)로 나타났다(p<0.01). 4. 월별 HI 항체 보유율은 11월이 66.66%(9마리 중 6마리)로 가장 높았으며 10월이 37.50%(32마리 중 6마리), 9월이 26.05%*142마리 중 37마리), 8월이 22.85%(35마리 중 8마리), 9월이 26.05%(142마리 중 37마리), 8월이 22.85%(35마리 중 8마리), 6월이 1.65%(241마리 중 4마리), 5월은 0%(222마리 중 0마리)이였다(p<0.01). 5. 지역별 일본뇌염바이러스에 대한 HI 항체보유율은 경기 16.56%(157마리 중 26마리, 충남 15.69%(172마리 중 27마리), 전북 7.14%(168마리 중 12마리)였고, 충북(71마리)과 강원(78마리)은 0%였다(p<0.010. Japanese Encephalitis virus(JEV) infects human and domestic animals via mosquitoes, Culex tritaeniorhynchus, and cause diseases that results in serious consequencies in Far East area during summer season. Thanks to the continuous research on this virus, the frequency of occurrence has been greatly diminished since the second half of 1970. But, there are still much work needs to be done on the virus, especially on their ecology in nature. We studied the antibodies in frogs based on the perspective that the research must be done on the carrier animals of the virus. We tested sera by HI method from 681 frogs captured randomyl in the six provinces. The results are summarized as following 1. Antibody positive rate to HI was 9.83%(67 out of 681). 2. Among these positive frogs, positive rate for male was 2.63%(14 out of 531), and positive rate for famale was 35.33%(53 out of 150). the positive rate for female is higher than that of male by about 13 times. 3. Different positive rates were shown among different species; 100%(1 out of 1) in Rana temporaria ornativentris, 66.66%(2 out of 3) in Rana temporaria orativentris, 50%(18 out of 36) in Rana plancyi chosenica, 33.33%(2 out of 6) in Rana rugosa and 6.92%(44 out of 635) in Rana niglomaculata. 4. When the monthly positive rates were compared, November was the highest as 66.66%(6 out of 9), 37.5%(6 out of 32) in October 26.05%(37 out of 142) in September, 22.85%(8 out of 35) in August, 65%(4 out of 241) in June and 0% in May 5. Areal distribution of positive rate to HI was 16.56%(26 out 157) in Kyung Kee, 15.69%(27 out of 172) in Chung Nam, 7.14%(12 out of 168) in Chun Buk, and 0% both in Chung Buk and Gang Won.

      • 자외선 A-1으로 치료한 사마귀양 균상 식육종 1예

        서기석,이진우,김상태 고신대학교의과대학 2008 고신대학교 의과대학 학술지 Vol.23 No.1

        Verrucous mycosis fungoides is very rare variant of cutaneous T cell lymphoma that manifests verrucous crusted lesion and may be clinically misdiagnosed as a wart, deep fungal infection or atypical mycobacterial infection. If it is located acrally, it might then be better classified as mycosis fungoides palmaris et plantaris or pagetoid reticulosis. We report a case of solitary verrucous mycosis fungoides on the left knee in 25-year-old woman successfully treated ultraviolet A-1 phototherapy.

      • 齒科嬌正用線材의 物理的 性質에 미치는 熱處理의 影響

        李基大,權五源,成材鉉 慶北大學校 齒科大學 1985 慶北齒大論文集 Vol.2 No.1

        The physical properties of .016" orthodontic wires by heat treatment were studied in tension, bending, hardness and microstructures. The wires were tested in the as-manufactured and heat-treated conditions. The results were as follows: Ultimate tensile strength and yield strength were slightly increased by heat treatment, but Elgiloy was the most effective by geat treatment. The strength of Elgiloy showed the highest value after heat treatment above 6 minutes at 500, 600℃. Also, bending fluxure modulus of elasticity were progressively increased by heat treatment. the hardness number of Australian of as-manufactured wires showed the highest value, and Elgiloy showed the highest value by heat treatment. Microstructure of as-manufactured wires showed fibrous interlocking grains, and a coarse grains after heat treatment and an austenite structure after solution heat treatment.

      • 친환경건축물 인증기준의 분류체계 비교 연구

        이승민,박상동,신기식,최무혁 대한건축학회 2003 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.23 No.1

        Energy problem of our country is very serious and the energy import is being increased continuously. To solve the problems related to energy and environment, many countries including our country have prepared and carried out various certification programs to disseminate environmentally friendly buildings. The purpose of this study is to investigate the basics and category systems of domestic green building certification criteria and to utilize it as reference materials for developing integrated criteria applicable to all buildings.

      • SCIESCOPUSKCI등재
      • β-Carotene 이 혈중 효소활성도에 미치는 영향

        이상한,우기민,조만희,장예진,김창세,김현철 순천향의학연구소 1997 Journal of Soonchunhyang Medical Science Vol.3 No.2

        This study was carried out in order to observe the effects of ethanol and β-carotene on the cholesterol, Triglyceride, LDL-cholesterol, HDL-cholesterol, glutathione peroxidase and catalase activities. The normal white S.D rats were classified into 4 group: 0.9% NaCl administration and 20% ethanol administration were referred to as group A, 20% ethanol and 50% β-carotene mixture administration was group B and 50% β-carotene administration was group C for the 30 day-feeding experiment. The results were obtained as following: 1. The blood lipid concentration was most highly increased in group A, was almost normal in group B, but significantly decreased in goup C. 2. The blood antioxidant enzyme activities were significantly decreased in group A, but significantly increased in goup B and C. 3. The blood β-carotene concentration were significantly decreased in group A, and slightly decreased in group B. Surprisingly it was increased in group C.

      • 열연신 공정중 폴리에틸렌 테레프탈레이트 단사의 성질 연구 : Ⅱ. 열수축과 기계적 성질 Ⅱ. Shrinkage and Mechanical Property

        이기윤,김성철 忠南大學校 産業技術硏究所 1993 산업기술연구논문집 Vol.8 No.1

        Shrinkage and mechanical property changes were evaluated during the course of extrusion and hot stretching processes of Poly (ethylene terephthalate) monofilament fibers in this study. Poly (ethylene terephthalate) chips were extruded at 260-275℃ through a monofilament die and the extruded monofilaments were quenched at different temperatures (0-40℃). These quenched monofilaments were then stretched at a hot water bath (temp. 70-90℃, stretch ratio from 1:1 to 1:6). The stretched monofilaments were then thermally treated at 195℃ for 30 minutes to measure shrinkage. The general trends were that Yield stress, ultimate tensile stress and modulus showed decrease in the range of stretch ratios from 1:1 to 1:2 while they all showed linear increase from stretch ratios of about 1:2 to 1:6. A maximum shrinkage was noted at the stretch ratios between 1:2 to 1:3 (max. 45%) at 80℃ stretching condition. This could be attributed to the combined effect of increased orientation and increased degree of crystallinity at high stretch ratios.

      • Contact 경계조건을 이용한 CIB 패키지의 휨 수치모사

        이상혁,김선경,박세훈,강남기 한국공작기계학회 2009 한국공작기계학회 춘계학술대회논문집 Vol.2009 No.-

        In this work, we have analyzed the warpage of em packages after processing. Geometric complexity is the main bottleneck in package simulation. Moreover, each layer has been modeled separately and then assembled together by the use of the contact boundary conditions between layers. Thus, modeling with full consideration of temperature-dependent properties and thermal cure is possible by nonlinear simulation with cure model but infeasible in terms of cost-effectiveness. Therefore, we have proposed to use the pseudo processing temperature (PPT) where the stress is free throughout the entire domain. As a result, warpage of CIB packages can be accurately simulated with a linear solver thanks to the use of PPT.

      • 담배 박각시나방 Manduca sexta의 계획된 세포죽음동안의 Proteasome의 변화

        이구봉,우기민,조만희,이상한,장예진,김창세 순천향의학연구소 2000 Journal of Soonchunhyang Medical Science Vol.6 No.2

        모든 진핵세포의 주요 단백질 분해요소인 proteasome은 변성되거나 상해된 불필요한 단백질을 제거할 뿐만 아니라, 세포주기를 비롯한 다양한 대사과정들의 주요 효소들을 필요 시 적절히 분해함으로써 항상성을 유지시키는 필수적인 효소로 잘 알려져 있다. 또한 proteasome은 특정 포유동물 조직의 계획된 세포죽음(programmed cell death 또는 apoptosis)와 밀접하게 관련되어 있다고 보고된 바, 본 연구에서는 담배 박각시나방(Manduca sexta)의 변태과정에서 일어나는 마디간 근육(intersegmental muscle)의 급격한 파괴과정동안의 proteasome의 변화양상을 발현 및 단백질 분해활성을 중점으로 조사하였다. 정상근육과 파괴직전의 근육으로부터 proteasome을 분석한 결과 단백질 분해활성이 최소한 6배 이상 증가하였으며, proteasome의 주요 구성성분들의 발현 변화를 각각의 항체(antibody)를 이용하여 조사한 결과 세포죽음 직전에 급격히 증가함을 보였다. 이러한 구성성분들의 발현증가가 proteasome 복합체 형성을 통해 활성의 증가를 일으키는지 조사한 결과, 세포내에서 실질적으로 단백질 분해활성을 담당한다고 여겨지는 26S proteasome(2,000 kDa)의 위치에서 커다란 활성의 변화와 구성성분의 증가를 볼 수 있었다. 따라서, 담배 박각시나방의 계획된 세포죽음 현상은 특정 호르몬의 신호에 의해 proteasome의 발현이 급격히 증가하여 26S proteasome의 복합체 형태로 세포 내 대부분의 단백질들을 분해함으로써 30시간이내 근육조직을 완전히 소멸시키는 것을 알 수 있었다. 한편, proteasome을 구성하는 특정 구성성분의 과다 발현이 세포의 단백질 분해현상에 어떠한 영향을 미치는 지 조사하기 위하여 쥐의 fibroblast cell에 26S proteasome의 ATPase 구성성분인 m56 유전자를 삽입한 후 세포의 추출물로부터 proteasome의 양과 활성의 변화를 관찰하였다. Proteasome을 초원심분리로 추출하여 관찰한 결과, 담배 박각시나방의 경우와는 달리 유전자 삽입 세포는 모든 실험에서 정상 세포와 전혀 차이를 보이지 않았다. 이 결과로부터 세포의 생명 유지에 필수적이고 매우 다양한 기능을 가진 proteasome은 40여개의 구성성분들의 발현이 매우 정교하게 조절되고 있으며, 특정 세포죽음 자극(apoptotic signal)이 왔을 때 일련의 구성 성분들의 발현과 26S proteasome 복합체 형성이 증가함으로써 그 기능을 수행하는 것을 알 수 있으며, 보다 자세한 연구는 비정상적 단백질 분해나 세포죽음을 동반하는 여러 질환들의 원인과 현상을 규명할 수 있으며, 또한 그 활성을 조절함으로써 궁극적인 치료의 방향도 제시 가능할 것으로 기대된다.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼