Projections of summertime ozone concentration over East Asia under multiple IPCC SRES emission scenarios

Lee, Jae-Bum,Cha, Jun-Seok,Hong, Sung-Chul,Choi, Jin-Young,Myoung, Ji-Su,Park, Rokjin J.,Woo, Jung-Hun,Ho, Changhoi,Han, Jin-Seok,Song, Chang-Keun Elsevier 2015 Atmospheric environment Vol.106 No.-

<P><B>Abstract</B></P> <P>We have developed the Integrated Climate and Air Quality Modeling System (ICAMS) through the one-way nesting of global–regional models to examine the changes in the surface ozone concentrations over East Asia under future climate scenarios. Model simulations have been conducted for the present period of 1996–2005 to evaluate the performance of ICAMS. The simulated surface ozone concentrations reproduced the observed monthly mean concentrations at sites in East Asia with high R<SUP>2</SUP> values (0.4–0.9), indicating a successful simulation to capture both spatial and temporal variability. We then performed several model simulations with the six IPCC SRES scenarios (A2, A1B, A1FI, A1T, B1, and B2) for the next three periods, 2016–2025 (the 2020s), 2046–2055 (the 2050s), and 2091–2100 (the 2090s). The model results show that the projected changes of the annual daily mean maximum eight-hour (DM8H) surface ozone concentrations in summertime for East Asia are in the range of 2–8 ppb, −3 to 8 ppb, and −7 to 9 ppb for the 2020s, the 2050s, and the 2090s, respectively, and are primarily determined based on the emission changes of NO<SUB>x</SUB> and NMVOC. The maximum increases in the annual DM8H surface ozone and high-ozone events occur in the 2020s for all scenarios except for A2, implying that the air quality over East Asia is likely to get worse in the near future period (the 2020s) than in the far future periods (the 2050s and the 2090s). The changes in the future environment based on IPCC SRES scenarios would also influence the change in the occurrences of high-concentrations events more greatly than that of the annual DM8H surface ozone concentrations. Sensitivity simulations show that the emissions increase is the key factor in determining future regional surface ozone concentrations in the case of a developing country, China, whereas a developed country, Japan would be influenced more greatly by effects of the regional climate change than the increase in emissions.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Change in ozone level is determined by the combination of NO<SUB>x</SUB> and NMVOC emissions. </LI> <LI> Ozone level over East Asia would get worse in the near future (the 2020s) than far future. </LI> <LI> A high-concentration event generally increases and more frequently occurs in the future. </LI> <LI> Change in ozone air quality in a developing country depends more on emissions change. </LI> <LI> Change in ozone air quality in a developed country depends more on climate change. </LI> </UL> </P>

Changes of Sugar Composition and Related Enzyme Activities during Fruit Development of Asian Pear Cultivars ‘Niitaka’ and ‘Whangkeumbae’

Jin-Ho Choi,Jang-Jeon Choi,Chang-Seok Bang,Jung-Sup Lee,Dong-Woog Choi,Hye-Sun Cho,Jun Cheul Ahn 한국원예학회 2009 Horticulture, Environment, and Biotechnology Vol.50 No.6

We report on the seasonal changes of soluble sugar accumulation and several enzyme activities related to sugar metabolism, in two Asian pear cultivars (Pyrus pyrifolia) cultivars ‘Niitaka’ and ‘Whangkeumbae’. Soluble sugar content increased as the fruit developed and its total contents in matured fruits were 104.6 and 95.1 ㎎ㆍg?¹ fresh weight for ‘Niitaka’ and ‘Whangkeumbae’, respectively. However, the fructose-glucose-sucrose-sorbitol ratio was not significantly changed. Sorbitol-6-phosphate dehydrogenase activity was maintained at high level in leaves and low in fruits throughout the fruit development, although the enzyme activity highly fluctuated in young and mature fruits. NAD-dependent sorbitol dehydrogenase activity increased sigmoidally in both leaves and fruits during fruit development, and correlated with accumulation of total sugar in fruits. Sucrose synthase and sucrose phosphate synthase (SPS) activities remained low in leaves, but higher with two peak fluctuations in fruits. The change of soluble sugar contents positively correlated with SPS activity, based on the seasonal fluctuation of SPS activity and soluble sugar accumulation.

Study on Aging Effect of Adhesion Strength Between Polyimide Film and Copper Layer

Seok‑Bon Koo,Chang‑Myeon Lee,Sang‑Jun Kwon,Jun‑Mi Jeon,Jin‑young Hur,Hong‑Kee Lee 대한금속·재료학회 2019 METALS AND MATERIALS International Vol.25 No.1

This paper experimentally confirmed that the adhesion strength of the copper layer formed on the surface of the polyimidefilm by wet plating greatly changes with the aging time. The adhesion strength of the copper layer showed a rapid increasefrom 4 to 10 h after aging had begun and then converged to a value without a significant change. The adhesion enhancementbetween polyimide film and copper layer by aging is due to the interlocking effect caused by the volume expansion of copperoxide (CuO) formed in the polyimide, the increased mobility of copper particles enlarged by the decrease of impuritiesin the copper layer grain boundaries, and the consequent change of the crystal structure of the copper layer leading to theinternal stress reduction. Such adhesion improvement can be confirmed by the progress of the cohesive failure indicatingthe breakdown of the polyimide film.

혼입불순물이 구리 도금층의 미세조직변화에 미치는 영향

구석본(Seok-Bon Koo),전준미(Jun-Mi Jeon),이창면(Chang-Myeon Lee),허진영(Jin-Young Hur),이홍기(Hong-Kee Lee) 한국표면공학회 2018 한국표면공학회지 Vol.51 No.4

The self-annealing which leads evolution of microstructure in copper electroplating layers at room temperature occurs after forming deposition layer. During the process, crystal orientation, size and sheet resistance of plating layer change. Lastly, it causes the change of physical and mechanical characteristics such as a tensile strength of plating layer. In this study, the variation of incorporated impurities, microstructure and sheet resistance of copper plating layer formed by electroplating are measured with and without inorganic additives during the self-annealing. In case of absence of inorganic additives, the copper layer presents strong total intensity of incorporated impurities. During the self-annealing, such width of reduction was significant. Moreover, microstructure and crystal size are increased while the tensile strength is decreased noticeably. On the other hand, in the presence of inorganic additives, there is no observable distinction in the copper plating layer. According to the observation on movements of the incorporated impurities in electrodeposition copper layer, within 12 hours the impurities are continuously shifted from inside of the plating layer to its surface after as-deposited electroplating. Within 24 hours, except for the small portion of surface layer, it is considered that most of the microstructure is transformed.

Evaluation on Fatigue Characteristics of Tire Sidewall Rubber according to Aging Temperature

( Namgyu Jun ),( Byungwoo Moon ),( Yongseok Kim ),( Jae-mean Koo ),( Chang-sung Seok ),( Ui Seok Hong ),( Min Kyeong Oh ),( Seong Rae Kim ) 한국고무학회 2017 엘라스토머 및 콤포지트 Vol.52 No.3

Ultra-high performance (UHP) tires, for which demand has recently surged, are subject to severe strain conditions due to the low aspect ratio of their sidewalls. It is important to ensure sidewall material durability, since a sudden tire sidewall breakage during vehicle operation is likely to cause a major accident. In the automotive application of rubber parts, cracking is defined as a failure because when cracks occur, the mechanical properties of rubber change. According to Mars⁽⁸⁾, Andre⁽¹¹⁾ et al., strain and strain energy density (SED) are mainly used as a failure parameters and the SED is generally used as a fatigue damage parameter. In this study, the fatigue life curves of sidewall rubber of tires were determined by using the SED as fatigue damage parameter while the effect of aging on fatigue life was evaluated after obtaining the SED-Nf curves according to aging condition.

강원도 남부지역에서 소나무림 벌채 후 초기 종조성 변화

조용찬 ( Yong Chan Cho ),김준수 ( Jun Soo Kim ),이창석 ( Chang Seok Lee ),조현제 ( Hyun Je Cho ),이호영 ( Ho Yeong Lee ),배관호 ( Kwan Ho Bae ) 한국임학회 2011 한국산림과학회지 Vol.100 No.2

강원도 남부 지역의 발달단계가 다른 소나무림 벌채지에서 16년 동안의 식생 변화를 연구하였다. 교란 후, 천이 궤적 및 환경 변화를 온도, 상대습도, 서열분석(Detrended Correspondence Analysis, DCA), Multiple Responses Permutation Procedure(MRPP) 및 지표종 분석(Indicator Species Analysis, ISPAN) 등을 통하여 분석하였다. 벌채 직후, 수관열림도는 대조구와 비교하여 세 배(1yr 68.3% 및 R1 23.0%)로 급격히 증가한 후 감소하였으나, 상대습도는 비교적 작은 변화(약 6% 감소)를 나타내었다. DCA 결과, 벌채 후 초기에는 종조성이 이질적으로 변화하였으나, 점차 벌채 이전(대조구)의 것과 유사하게 발달하였다. MRPP 결과, 각 발달 단계(1yr, 3yr, 10yr 및 16yr)의 종 조성은 대조구(R1, R3, R10 및 R16)의 것과 유의한 차이를 보였다. 1yr 및 3yr에서는 목본성 종이, 10yr 및 16yr에서는 초본 종들이 주요 종으로 분석되어, 교란 직후에는 목본성 종들이 활발한 재생을 나타내며, 이후 초본 식생이 발달하는 것을 보였다. 연구 대상지역의 천이는 초기 식물상 조성 모델로 설명할 수 있을 것으로 판단된다. Vegetation changes were studied for 16 yr in clearcut logged Pinus densiflora forests in the southern Gangwon-do province in Korea by applying chronosequence approach. Ambient temperature and relative humidity, Detrended Correspondence Analysis (DCA), Multiple Responses Permutation Procedure (MRPP), Indicator Species Analysis (ISPAN) were used to examine successional trajectory and compositional changes. After clearcutting, canopy openness was increased abruptly at three folds (1yr 68.3% and R1 23.0%) and then decreased, but relative moisture was slightly decreased (6%) compare to control site. In the result of DCA, right after clear cutting, vegetation composition was developed heterogeneously compared to control sites, and then approached to control sites within 16 years. Based on MRPP, species composition of each developmental stages (1yr, 3yr, 10yr and 16yr) revealed signigicant differences to that of control vegetation (R1, R3, R10 and R16). Indicator species in 1yr and 3yr samples included various woody species rather than herbaceous species, but in 10yr and 16yr, herbaceous were more abundant. Earlier succession of pine forests likely can explain to Initial Floristic Composition (IFC) Model.

개 시상하부의 Neuropeptides에 대한 면역조직화학적 연구

장인엽,정윤영,김종중,문정석,김준수,모근석,임용,유호진 朝鮮大學校 附設 醫學硏究所 1996 The Medical Journal of Chosun University Vol.21 No.1

The distribution and localization of somatostatin(SOM), neuropeptide Y(NPY), vasopressin(VP), and oxytocin(OT) were studied with a immunohistochemical technique in the canine hypothalamus. The SOM-immunoreactive perikarya were concentrated in the anterior periventricular and the arcuate nuclei. Immunoreactive terminals were observed in the arcuate, the ventromedial hypothalamic, the suprachismatic nuclei and the external layer of the median emmence. A great number of NPY-immunoreactive cell bodies were found in the arcuate nucleus and NPY fibers were located throughout the hypothalamus with the highest concentration especially in the paraventricular (PVN) and the acuate nuclei. Moderately or densely stained fibers were also observed in the median eminence, the suprachiasmatic. the periventricular, the ventromedial hypothalamic, the dorsomedial hypothalamic and the medial preoptic nuclei, and the stria terminalis. Both VP-and OT-containing perikarya were found mainly in the PVN and supraoptic nucleus(SON). but a few were seen in the perifornical area, the lateral hypothalamus, the dorsal hypothalamic and the periventricular nucleus. The fibers originated from the PVN were projected to the SON via ventral or dorsal area of the fornix.

고압 커패시터의 고장 분석을 통한 신뢰도 예측

양석준,김진우,신승우,이희진,신승훈,유동수,장석원 한국비파괴검사학회 2001 한국비파괴검사학회지 Vol.21 No.6

본 논문은 고압 커패시터의 고장분석과 신뢰성 예측 결과를 다루고 있다. 부품의 수명과 고장률을 예측하기 위해서 두 가지 방법으로 고장 모드와 고장 메커니즘을 연구하였다. 에폭시 수지로 성형된 고압 커패시터가 절연내압 시험 하에서 저항이 제로로 되는 고장에 대하여, 근본원인 고장분석 체계를 효과적으로 수립함으로써 고장 메커니즘의 원인을 분석하였다. 특히 세라믹-에폭시 계면에서의 절연파괴 고장 현상이 강조되었으며, 본 연구에서 얻어진 결과의 타당성은 마그네트론에 장착된 고압 커패시터의 열사이클 시험 수행에 의한 가속시험 결과로부터 입증되었다. 시험 결과들은 결함이 있는 로트를 신속히 규명하고 B10수명을 결정하는데 유용하게 사용할 수 있다. 또한, 유전체의 절연파괴에 대해서 부하-강도 간섭모델을 이용하여 고장률을 예측하였다. This paper presents a result of failure analysis and reliability evaluation for high voltage ceramic capacitors. The failure modes and failure mechanisms were studied in two ways in order to estimate component life and failure rate. The causes of failure mechanisms for zero resistance phenomena under withstanding voltage test in high voltage ceramic capacitors molded by epoxy resin were studied y establishing an effective root cause failure analysis. Particular emphasis was placed on breakdown phenomena at the ceramic-epoxy interface. The validity of the results in this study was confirmed by the results of accelerated testing. Thermal cycling test for high voltage ceramic capacitor mounted on a magnetron were implemented. Delamination between ceramic and epoxy, which might cause electrical short in underlying circuitry, can occur during curing or thermal cycle. The results can be conveniently used to quickly identify defective lots, determine B10 life estimation each lot at the level of inspection, and detect major changes in the vendors processes. Also, thd condition for dielectric breakdown was investigated for the estimation of failure rate with load-strength interference model.

고압전류 감전자에게서 나타난 말초신경병증 증례보고

손준석,김영욱,채창호,민경범,이철호 대한산업의학회 2006 대한직업환경의학회지 Vol.18 No.4

Background: With increasing industrial development, opportunities are growing to contact electricity in the workplace or home. Therefore, the risk of electrical accident has been increased gradually. In general, electrical injuries involve the extremities and result in amputation or severe disability of limbs. Delayed spinal cord injury and peripheral neuropathies following electrical accidents are extremely rare. Case report: A 32-year-old man with 10 years working experience at a CRT-monitor manufacturer with repetitive exposures to high voltage current visited our hosipital. He complained of left leg weakness and atrophy, and intermittent pain. The symptoms were progressive. Other symptoms occurred such as nocturia, hesitancy, and weak urinary stream. We examined the patient and conducted EMG, L-spine MRI, neurometer test, isokinetic strength test, and physical examination. The results showed neural injuries due to anterior horn lesions or compression of the left femoral nerve pathway, with a consequent diagnosis of neurogenic bladder.

境界-適應 Kalman필터를 이용한 映像復元에 관한 硏究

문성준,김창석 明知大學校 産業技術硏究所 1991 産業技術硏究所論文集 Vol.10 No.-

In general smoothing pheomenon occurs in edge area when image is filtered by 2-dimensional Kalman filter because of its low-pass characteristics. To overcome this phenomenon, i.e. to get better restroration image, we apply an edge-adaptive Kalman filter to a degraded image. Degraded image is modeled by NSHP model, This modeled image is devided in to edge and background according to local statistics. Using a new masking function which depends on the local characterics of the models image, we compute adaptive filer coefficient such that edge noise is cancelled while edge information is preserved. Computer simulation results show what SNR(signal to noise ratio) increases by applying suggested filtering procedure. In the case of SNR 10[dB], girl(1) image increases to 5.3[dB] and in the case of SNR 5[dB], SNR of increases to 7.0[dB] respectively. Especially, computation results of Laplacian operation, we gained that edge information of image is restorated fully.