가압가열 및 Microwave 처리가 생면의 품질에 미치는 영향

박시우,김꽃봉우리,김민지,강보경,박원민,김보람,박홍민,최정수,최호덕,안동현,Bark, Si-Woo,Kim, Koth-Bong-Woo-Ri,Kim, Min-Ji,Kang, Bo-Kyeong,Pak, Won-Min,Kim, Bo-Ram,Park, Hong-Min,Choi, Jung-Su,Choi, Ho-Duk,Ahn, Dong-Hyun 한국식품영양학회 2013 韓國食品營養學會誌 Vol.26 No.4

중력분을 이용하여 제면한 후 가압가열, microwave 및 가압가열과 microwave 병행 처리한 후, 생면 및 삶은 면의 품질에 미치는 영향에 대하여 알아보았다. 생면의 pH는 microwave 1 min 처리구에서 무처리구와 유의적인 차이를 보이지 않았으며, 수분 함량은 autoclave 50 min 처리구에서 무처리구와 유의적인 차이를 보이지 않았고, 그 외의 처리구에서는 모두 수분 함량이 감소함을 확인하였다. 면의 색도 측정 결과는 명도는 무처리구에 비해 모든 처리구에서 감소하였으며, 적색도는 microwave 1 min 처리구는 감소한 반면, 나머지 처리구는 증가하였다. 황색도는 autoclave 50 min 처리구와 autoclave 50 min/microwave 1 min 병행 처리구에서 증가한 반면, 나머지 물리적 처리구에서는 감소하였다. 삶은 면의 색도에서는 명도, 적색도, 황색도 모두에서 무처리구에 비하여 물리적 처리구에서 증가한 값을 나타내었다. 물성 측정 결과는 경도, 부착성, 응집성, 검성, 복원성에서 무처리구와 비교시 microwave 1 min 처리구는 유의적으로 감소하였으며, 그 외 처리구에서는 유의적으로 증가한 값을 나타내었다. 탄력성과 전단력은 모든 처리구에서 유의적으로 증가하였으며, 인장력은 가압가열 30 min 처리구와 무처리구가 유의적인 차이를 보이지 않았으나, 나머지 물리적 처리구에서는 유의적으로 증가하였다. 관능 평가 결과는 생면의 경우 색 항목에서 물리적 처리구들이 유의적으로 낮은 점수를 받았다. 맛, 질감, 향 항목에서는 무처리구와 물리적 처리구간 유의적 차이를 보이지 않았다. 전체적인 기호도에서는 microwave 1 min 처리구가 가장 높은 점수를 얻었으며, 가압가열(50 min)과 microwave(1 min) 병행 처리구는 무처리구와 비슷한 점수를 얻었다. 따라서 제면 후 가압가열 및 microwave 처리가 생면 및 삶은 면에 있어서 색과 질감 항목을 보완, 개선시킨다면 알러겐성이 저감화된 면을 제품화하는데 적합할 것으로 사료되어진다. This study was conducted to determine the effects of physical treatments for quality of wet noodles. Noodles were being tried with a microwave (for 1 min), an autoclave (for 30 or 50 min), and both autoclave and microwave (for 30/1 min or 50/1 min). The results showed that the pH levels were slightly decreased after treatments of autoclave and autoclave/microwave. The moisture contents were considerably decreased as compared to the control except autoclave (50 min). After all treatments, the lightness was decreased in all samples, but, redness was increased (except microwave) and the yellowness was increased after autoclave (50 min) and autoclave/microwave (50/1 min). Texture was increased as compared to the control except microwave. In the sensory evaluation, the noodles treated with microwave, autoclave (50 min), and autoclave/ microwave (50/1 min) showed a high score in overall preference. From these results, both the autoclave and microwave methods can be applied to the wet noodles without diminishing its quality to a great extent.

Accuracy of cardiac output measurements during off-pump coronary artery bypass grafting: according to the vessel anastomosis sites

Sung Yong Park,Dae Hee Kim,Han Bum Joe,Ji Young Yoo,Jin Soo Kim,Min Kang,Yong Woo Hong 대한마취통증의학회 2012 Korean Journal of Anesthesiology Vol.62 No.5

Background: During beating heart surgery, the accuracy of cardiac output (CO) measurement techniques may be influenced by several factors. This study was conducted to analyze the clinical agreement among stat CO mode (SCO), continuous CO mode (CCO), arterial pressure waveform-based CO estimation (APCO), and transesophageal Doppler ultrasound technique (UCCO) according to the vessel anastomosis sites. Methods: This study was prospectively performed in 25 patients who would be undergoing elective OPCAB. Hemodynamic variables were recorded at the following time points: during left anterior descending (LAD) anastomosis at 1 min and 5 min; during obtuse marginal (OM) anastomosis at 1 min and 5 min: and during right coronary artery (RCA) anastomosis at 1 min and 5 min. The variables measured including the SCO, CCO, APCO, and UCCO. Results: CO measurement techniques showed different correlations according to vessel anastomosis site. However, the percent error observed was higher than the value of 30% postulated by the criteria of Critchley and Critchley during all study periods for all CO measurement techniques. Conclusions: In the beating heart procedure, SCO, CCO and APCO showed different correlations according to the vessel anastomosis sites and did not agree with UCCO. CO values from the various measurement techniques should be interpreted with caution during OPCAB. Background: During beating heart surgery, the accuracy of cardiac output (CO) measurement techniques may be influenced by several factors. This study was conducted to analyze the clinical agreement among stat CO mode (SCO), continuous CO mode (CCO), arterial pressure waveform-based CO estimation (APCO), and transesophageal Doppler ultrasound technique (UCCO) according to the vessel anastomosis sites. Methods: This study was prospectively performed in 25 patients who would be undergoing elective OPCAB. Hemodynamic variables were recorded at the following time points: during left anterior descending (LAD) anastomosis at 1 min and 5 min; during obtuse marginal (OM) anastomosis at 1 min and 5 min: and during right coronary artery (RCA) anastomosis at 1 min and 5 min. The variables measured including the SCO, CCO, APCO, and UCCO. Results: CO measurement techniques showed different correlations according to vessel anastomosis site. However, the percent error observed was higher than the value of 30% postulated by the criteria of Critchley and Critchley during all study periods for all CO measurement techniques. Conclusions: In the beating heart procedure, SCO, CCO and APCO showed different correlations according to the vessel anastomosis sites and did not agree with UCCO. CO values from the various measurement techniques should be interpreted with caution during OPCAB.

푸른길 공원의 대기 환경 특성에 관한 연구

민경우,이경석,박옥현,윤관주,김도술,박세일,정원삼,이대행,조영관,Min, Kyoung-Woo,Lee, Kyoung-Soek,Park, Ok-Hyun,Yoon, Kwan-Ju,Kim, Do-Sool,Park, Se-Il,Jeung, Won-Sam,Lee, Dae-Hang,Cho, Young-Gwan 한국환경보건학회 2015 한국환경보건학회지 Vol.41 No.3

Objectives: This study aimed to survey the characteristics of air quality and meteorological conditions in a greenway park. Methods: We measured meteorological and health related factors, including noise, particulate matter ($PM_{10}$) and selected gaseous air pollutants at three locations in a greenway park and on a general roadside as comparison. The measurements were repeated four times from April to October 2014. Results: The average air temperature in the greenway park was $20.7^{\circ}C$ which was $1-2^{\circ}C$ lower than on the general roadside. The average $PM_{10}$ concentration in the greenway park was $85.0{\mu}g/m^3$, a level 2-3 times lower than that at the roadside. The noise level at the greenway site was 4.4 dB(A)- 23.0 dB(A) lower than at the roadside. The average CO, $CO_2$, $SO_2$ and NOx concentrations in the greenway park were lower than at the roadside. The average phytoncide and anions concentrations in the greenway park were higher than at the roadside. Conclusions: The urban forest of the greenway park may have some impact on air quality and meteorological conditions.

Layer-controlled thinning of black phosphorus by an Ar ion beam

Park, Jin Woo,Jang, Sung Kyu,Kang, Dong Ho,Kim, Doo San,Jeon, Min Hwan,Lee, Won Oh,Kim, Ki Seok,Lee, Sung Joo,Park, Jin-Hong,Kim, Kyong Nam,Yeom, Geun Young Royal Society of Chemistry 2017 Journal of Materials Chemistry C Vol.5 No.41

<▼1><P>BP thinning was carried out using a monoenergetic Ar<SUP>+</SUP> ion beam and the BP could be thinned without damaging the surface.</P></▼1><▼2><P>Black phosphorus (BP) is one of the most interesting two-dimensional (2D) layered materials due to its unique properties, including a band gap energy change from 0.3 eV (bulk) to 2.0 eV (monolayer) depending on the number of BP layers, for application in nanoelectronic devices. In general, 2D layered materials including BP have limitations in terms of synthesis due to the process factors such as time, temperature, <I>etc.</I>, and thus, a thinning technique from the bulk material to a 2D material needs to be used while controlling the removed layer thickness. In this study, layer-controlled thinning of BP was performed by using a controlled Ar<SUP>+</SUP> ion beam method and the BP thinning characteristics were investigated. By using the near monoenergetic ion energy in the range of 45–48 eV, BP could be thinned with the thinning rate of ∼0.55 nm min<SUP>−1</SUP> down to bilayer BP without increasing the surface roughness and without changing the chemical binding states. The BP oxide on the pristine BP could also be successfully removed using the same Ar<SUP>+</SUP> ion beam. 2D BP field-effect transistors (FETs) fabricated with the thinned bilayer–10-layer BPs exhibited electrical characteristics similar to those of pristine BP FETs suggesting no electrical damage on the BP layers thinned by the controlled monoenergetic Ar<SUP>+</SUP> ion beam.</P></▼2>

An automated quality assurance system with deep learning for small cube-ball phantom localization in noisy megavoltage images

Park Min-Jae,Lee Gyemin,Kwak Jungwon,Jeong Chiyoung,Goh YoungMoon,Kim Sung-woo,Cho Byungchul,Song Si Yeol,Kim Jong Hoon,Jung Jinhong,Shin Young Seob,Oh Jungsu 한국물리학회 2024 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.84 No.9

To enhance effi ciency and minimize errors, we automated the quality assurance (QA) process in radiation oncology, specifi - cally laser localization. Additionally, we explored the use of a convolutional neural network (CNN) to enhance the detection of small cube-ball phantoms in noisy images. Laser localizations were measured manually on the acquired images. To automate the QA workfl ow, we developed a Linux server equipped with database and web servers. Digital Imaging and Communications in Medicine (DICOM) fi les were retrieved 40 times for 10 linear accelerators (LINACs). The center of the cube-ball phantoms was estimated through Gaussian fi tting. We applied CNN using 6,968 stored results to improve the estimation performance in noisy megavoltage (MV) images. Subsequently, both analysis time and accuracy were compared. Our hospital has been employing the automated QA system since 2018, notably reducing the time for laser localization from 30 min to just 1 min. The average and standard deviation (SD) of inter-observer variability in the X- and Y-axes were 0.06 ± 0.01 mm and 0.05 ± 0.01 mm, respectively. Absolute diff erences between manual assessment and Gaussian fi tting presented average and SD values of 0.40 ± 0.51 mm and 0.23 ± 0.24 mm, respectively. In contrast, absolute diff erences between manual assessment and CNN presented average and SD values of 0.12 ± 0.10 mm and 0.11 ± 0.09 mm, respectively. Overall, the automated QA system signifi cantly hastened procedures in our large hospital and improved the estimation of the cube-ball phantom’s position in noisy images through deep learning.

Gryllus bimaculatus extract protects against palmitate‑induced β‑cell death by inhibiting ceramide synthesis

Park Ie Byung,Kim Min Hee,Han Jung-Soon,Park Woo-Jae 한국응용생명화학회 2022 Applied Biological Chemistry (Appl Biol Chem) Vol.65 No.6

Type I diabetes mellitus is an autoimmune disease characterized by the destruction of β-cells, leading to severe insulin deficiency. Environmental factors and genetic predisposition are implicated in β-cell destruction, which is the final step in a cascade of complex events. Possible triggers of β-cell destruction are activation of Fas, activation of perforin, increased generation of reactive oxygen species, increased production of inflammatory cytokines, and endoplasmic reticulum (ER) stress. In this study, we examined whether Gryllus bimaculatus (GB) extract could prevent palmitate-induced β-cell apoptosis. Exposure to GB extract prevented palmitate-induced death of MIN6 cells, a mouse pancreatic β-cell line. Palmitate increased total ceramide levels with the elevation of ceramide synthase (CerS)1, CerS4, and CerS6 expressions. Treatment with GB extract decreased the levels and expressions of ceramides related to insulin resistance. CerS4 and CerS6 overexpression, but not CerS1 overexpression, increased palmitate-induced MIN6 cell death by increasing ceramide synthesis. Oppositely, inhibition of ceramide synthesis by fumonisin B1 treatment partially recovered palmitate-induced MIN6 cell death. Furthermore, GB extract reduced ER stress (phosphorylation of PERK and eIF2α), NF-κB–iNOS signaling, and the phosphorylation of MAP kinase (JNK, p38). GB extract reduced pro-apoptotic Bax protein expression but increased anti-apoptotic Bcl2 expression. In addition, CerS4 and CerS6 overexpression aggravated impairment of insulin secretion by palmitate, but GB extract recovered it. In conclusion, GB could be a functional food that improves palmitate-induced β-cell death and insulin secretion.

비만학생들의 운동후 회복시 초과 산소소비량 및 지속시간에 관한 연구

박철호,권민호,고봉민,박은경,우상헌 東亞大學校附設스포츠科學硏究所 1999 스포츠科學硏究論文集 Vol.17 No.-

The purpose of this study was to examine the effect of two different intensity of continuous exercise on magnitude of excess post-exercise oxygen consumption(EPOC), energy consumption following a 20min treadmill exercise. The subjects of this study were eight super-obesity in middle school students who were above 13 years old. subjects participated in two different exercise intensity to measure respiratory gas, blood lactate concentration and eardrum temperature. The results of this study were as follows: 1. The Energy consumption of the high intensity (80% VO₂ max) exercise group (264.68 35.60cal) was greater than that of the low intensity (50%) exercise group(172.01 20.39 Cal)(p<.001). 2. The EPOC of the high intensity exercise group (22.36+ 6.82Cal ) was greater than that of the low intensity exercise group(15.39+5.27 Cal)(p<.001). 3. The EPOC duration of th high intensity exercise group(28.36=3.56min) was longer than that of the low intensity exercise group(17.23+1.25min)(p<.001) 4. The blood lactate concentration, respiratory exchange ratio and temperature of the high intensity exercise group were greater than those of the low intensity exercise group(p<.05,p<.01). EPOC and duration were increase with 80%VO₂max, 80% VO₂max as intensity exercise got higher this also showed that it had something to do with lactate concentration in blood and increase of body temperature in the conclusion. We considered that there was a difference in using methods of energy, as there was a similar difference in RER. We though this following with oxygen consumption after exercise, we could clarify that high intensity exercise was better than lower intensity exercise in sametime for those who are obese especially adolescents to maintain their weights on the aspect of effect.

Park's Vector 기법을 이용한 소형 3상 유도 전동기의 권선 고장 진단

한민관(Min-kwan Han),우혁재(Hyeok-jae Woo),송명현(Myung-hyun Song),박규남(Kyu-nam Park) 대한전기학회 2003 대한전기학회 학술대회 논문집 Vol.2003 No.7

High-performance Liquid Chromatographic Analysis for Quantitation of Marker Compounds of Artemisia capillaris Thunb

( Kyung Min Park ),( Ying Li ),( Bora Kim ),( Haiyan Zhang ),( Kyong Hwangbo ),( Dong Gen Piao ),( Mei Juan Chi ),( Mi Hee Woo ),( Jae Sue Choi ),( Je Hyun Lee ),( Dong Cheul Moon ),( Hyeun Wook Chang 영남대학교 약품개발연구소 2013 영남대학교 약품개발연구소 연구업적집 Vol.23 No.0

Two stable high-performance liquid chromatography (HPLC) methods were developed that could quantitatively analyze 10 major marker compounds of Artemisia capillaris Thunb and could also distinguish among `Injinho` and `Myeon-injin` and `Haninjin`--A. capillaris collected in autumn, A. capillaris collected in spring and A. iwayomogi, which can be misused as `Injinho` in Korean herbal drug markets. The first HPLC method was a reversed-phase chromatography using a C18 column with an isocratic solvent system of phosphoric acid (0.05%) and acetonitrile at the flow rate of 1.0 mL/min, ultraviolet (UV) detection wavelength at 254 nm and column temperature at 40°C. Calibration andquantitation were made by using acetaminophen as an internal standard (I.S-A) and chlorogenic acid (1) was determined within 20 min. The second HPLC method was a reversed-phase chromatography using a C18 column with a gradient solvent system of phosphate buffer (0.015 M, pH 6) and acetonitrile at the flow rate of 1.0 mL/min, UV detection wavelength at 254 nm and column temperature at 40°C. Calibration and quantitation were made by using ethylparaben as an internal standard (I.S-B) and 3,5-di-O-caffeoylquinic acid (2), 3,4-di-O-caffeoylquinic acid (3), 4,5-di-O-caffeoylquinic acid (4), hyperoside (5), isoquercitrin (6), isorhamnetin 3-O-robinobioside (7), isorhamnetin-3-O-galactoside (8), isorhamnetin-3-O-glucoside (9) and scoparone (10) were determined within 60 min. Pattern recognitionanalysis of data from the 60 samples classified them clearly into three groups. These assay methods could be applied for QA/QC of A. capillaris and Artemisia iwayomogi.

Analysis of monitoring Road-kill in Odaesan National Park

Sang Jin Lim,Ki Yoon Kim,Woo Chan Lim,Hyeong Woo Ji,Baek Soon Choi,Tae Il Kim,Hyo Nam Kim,Ji Hong Min,Hey Ri Kim,Eui Kyeong Kim,Yung Chul Park 강원대학교 산림과학연구소 2017 강원대학교 산림과학연구소 학술대회 Vol.2017 No.11

We surveyed mammalian roadkill at the National Route 6 (Jin-gogae to Songcheon, 18㎞) and a local road 446 (Odaesan National Park office to Sangwon-temple, 12㎞) in Odaesan National Park. Data of the surveys were analyzed by year, month, and species. Roadkills of 226 individuals were found at the survey areas. Of them, the road-killed 131 mammal individuals, 44 bird individuals, 40 reptile individual and 11 amphibian individuals were found during the survey period. High ratio of the road-kills was observed in mammals than the other animals. Among mammalian species, high ratio of the road-kills was observed in squirrels. There were road-kills of three endangered species, containing otters, yellow-throated marten and leopard cats. According to the analyses of annual road-kills, roadkills of 104 cases were occurred and highly frequent in 2014, following by roadkills of 81 cases in 2015, and then those of 41 cases in 2016. Most ases of the roadkills occurred in summer (June to September). The results will contribute to establishing management for reduction of roadkill in Odaesan National Park.