음영기복 알고리즘을 활용한 한반도 촬영 위성영상에서의 지형그림자 탐지

김형규,임중빈,김경민,원명수,김태정,Hyeong-Gyu Kim,Joongbin Lim,Kyoung-Min Kim,Myoungsoo Won,Taejung Kim 대한원격탐사학회 2023 大韓遠隔探査學會誌 Vol.39 No.5

In recent years, the number of users has been increasing with the rapid development of earth observation satellites. In response, the Committee on Earth Observation Satellites (CEOS) has been striving to provide user-friendly satellite images by introducing the concept of Analysis Ready Data (ARD) and defining its requirements as CEOS ARD for Land (CARD4L). In ARD, a mask called an Unusable Data Mask (UDM), identifying unnecessary pixels for land analysis, should be provided with a satellite image. UDMs include clouds, cloud shadows, terrain shadows, etc. Terrain shadows are generated in mountainous terrain with large terrain relief, and these areas cause errors in analysis due to their low radiation intensity. previous research on terrain shadow detection focused on detecting terrain shadow pixels to correct terrain shadows. However, this should be replaced by the terrain correction method. Therefore, there is a need to expand the purpose of terrain shadow detection. In this study, to utilize CAS500-4 for forest and agriculture analysis, we extended the scope of the terrain shadow detection to shaded areas. This paper aims to analyze the potential for terrain shadow detection to make a terrain shadow mask for South and North Korea. To detect terrain shadows, we used a Hill-shade algorithm that utilizes the position of the sun and a surface's derivatives, such as slope and aspect. Using RapidEye images with a spatial resolution of 5 meters and Sentinel-2 images with a spatial resolution of 10 meters over the Korean Peninsula, the optimal threshold for shadow determination was confirmed by comparing them with the ground truth. The optimal threshold was used to perform terrain shadow detection, and the results were analyzed. As a qualitative result, it was confirmed that the shape was similar to the ground truth as a whole. In addition, it was confirmed that most of the F1 scores were between 0.8 and 0.94 for all images tested. Based on the results of this study, it was confirmed that automatic terrain shadow detection was well performed throughout the Korean Peninsula.

치악산 편마암 복합체에 분포하는 지하수 내 함유된 방사성 원소의 기원: 주변 지질을 구성하는 광물과의 연관성을 중심으로

김형규,이상우,김순오,정도환,김문수,김현구,정종옥,Kim, Hyeong-Gyu,Lee, Sang-Woo,Kim, Soon-Oh,Jeong, Do-Hwan,Kim, Moon-Su,Kim, Hyun-Koo,Jeong, Jong Ok 한국암석학회한국광물학회 2022 광물과 암석 (J.Miner.Soc.Korea) Vol.35 No.2

치악산 편마암복합체에서 방사성원소를 포함하고 있는 광물을 파악하고, 주변 지하수에 포함되어 있는 방사선원소(우라늄)와의 연관성을 확인하고자 암석학적 및 광물 화학 분석을 수행하였다. 현미경 및 전자현미경 분석 결과, 주 구성광물은 사장석, 흑운모, 석영, 알칼리장석, 녹니석 그리고 방해석이며, 부수광물은 스펜, 갈렴석, 인회석, 저어콘, 토라이트, 티탄철석, 황철석 그리고 방연석 등 총 14종을 확인하였다. 토라이트의 경우 거정의 갈렴석 내 ~1 mm의 크기로 소량 관찰된다. 희토류 원소를 많이 포함하고 있는 갈렴석은 각기 다른 3 가지 산출양상을 보인다. EPMA 분석 결과, 거정의 갈렴석에서는 TiO₂~1.70 wt.%, Ce₂O₃~11.86 wt.%, FeO~13.31 wt.%, MgO~0.90 wt.% 그리고 ThO₂~1.06 wt.% 원소들의 함량이 높게 나타나며, Al₂O₃ 17.35 ± 2.15 wt.% (n = 7), CaO 12.13 ± 1.81 wt.% (n = 7) 평균 함량이 가장 낮은 값을 보인다. 티탄철석을 둘러싸고 있는 스펜 집합체의 가장자리에 존재하는 갈렴석은 Al₂O₃~24.00 wt.%, Nd₂O₃~5.10 wt.%, Sm₂O₃~0.66 wt.%, Dy₂O₃~0.86 wt.% 그리고 Y₂O₃~1.38 wt.% 원소들의 함량이 높게 나타나며, TiO₂ 0.35 ± 0.21 wt.% (n = 11), Ce₂O₃ 5.25 ± 1.03 wt.% (n = 11), FeO 9.84 ± 0.26 wt.% (n = 11), MgO 0.12 ± 0.05 wt.% (n = 11) 그리고 La₂O₃ 1.49 ± 0.29 wt.% (n = 11) 등과 같이 평균 함량이 가장 낮은 값을 보인다. 모암의 기질부에서 관찰되는 갈렴석의 화학성분은 앞서 설명한 갈렴석의 중간 정도의 값을 가진다. 연구대상인 치악산 편마암복합체 내 미그마타이트질 편마암에는 주목할 만큼의 우라늄 함량을 가지는 광물이 발견되지는 않았다. 따라서 지하수에서 나타나는 우라늄의 기원과 주변 지질과의 연관성을 명확하게 밝혀내지는 못했다. 하지만 방사성 원소인 토륨 원소 및 희토류 원소를 다량 포함하는 갈렴석이 풍부하게 존재하는 것이 이번 연구결과로 확인되었다.

SEM파일의 이완하중 산정방법별 이완하중량 비교 연구

김형규,박은형,조국환,Kim, Hyeong-Gyu,Park, Eun-Hyung,Cho, Kook-Hwan 한국터널지하공간학회 2018 한국터널지하공간학회논문집 Vol.20 No.3

도심지 지하공간의 개발과 운행선 하부를 저토피로 입체 교차화하는 시설 증가에 따라 비개착식 공법의 수요는 점차 증가추세에 있으나 대다수의 공법은 중대구경 강관을 압입하여 루프를 형성하고 내부를 굴착하는 파이프루프(Pipe roof) 계열의 공법이 주로 적용되고 있다. 강관 압입 시 발생되는 이완영역 및 하중은 여러 인자의 영향을 받게 되나 가장 큰 요소는 압입하는 강관의 크기에 좌우되며 이는 강관 루프 내 지중구조물에 작용하는 하중의 크기로 볼 수 있다. 지반의 교란 및 이완하중 발생을 최소화시키기 위해 개발된 SEM공법(Super Equilibrium Method)은 기존의 중대구경 강관 대신 ${\Phi}114mm$ 내외의 소구경 강관을 사용한다. 이 소구경 강관을 SEM파일로 명명하였으며 강관의 선 압입 및 그라우팅 보강을 실시한 후 지반의 침하나 융기 없이 지반 내 횡단구조물을 유압잭을 이용하여 압입하게 된다. 이와 같이 SEM공법의 구성 중 지보역할을 하는 SEM파일은 선단부 굴착 시 지반의 붕락을 방지하고 상재하중을 지지하기 위한 길이 5 m 내외의 Fore poling 파일이며 이 파일의 배치간격, 시공연장, 부재의 강성 등을 산정하기 위해서는 이완영역의 적절한 산정이 필수적이다. 본 논문은 SEM공법의 최적설계를 위하여 SEM파일 압입 시 발생되는 이완하중 산정 값을 비교분석하였다. 이완영역 산정에 근거한 주요 이론식 및 경험식들의 영향인자를 고려하여 분석하고 FEM analysis (유한요소 해석)를 수행하여 SEM파일에 적합한 이완하중 산정을 검토하였다. 또한 실제 SEM파일 압입 및 굴착 시 발생되는 지반이완을 확인하기 위해 강관압입 축소모형실험을 수행하였으며 토피고/강관(H/D)에 따른 지표침하 및 지반이완을 정량적으로 검토하였다. With the increased development in downtown underground space facilities that vertically cross under a railway at a shallow depth, the demand for non-open cut method is increasing. However, most construction sites still adopt the pipe roof method, where medium and large diameter steel pipes are pressed in to form a roof, enabling excavation of the inside space. Among the many factors that influence the loosening region and loads that occur while pressing in steel pipes, the size of the pipe has the largest impact, and this factor may correspond to the magnitude of load applied to the underground structure inside the steel pipe roof. The super equilibrium method (SEM) has been developed to minimize ground disturbance and loosening load, and uses small diameter pipes of approximately 114 mm instead of conventional medium and large diameter pipes. This small diameter steel pipe is called an SEM pile. After SEM piles are pressed in and the grouting reinforcement is constructed, a crossing structure is pressed in by using a hydraulic jack without ground subsidence or heaving. The SEM pile, which plays the role of timbering, is a fore-poling pile of approximately 5 m length that prevents ground collapse and supports surface load during excavation of toe part. The loosening region should be adequately calculated to estimate the spacing and construction length of the piles and stiffness of members. In this paper, we conducted a comparative analysis of calculations of loosening load that occurs during the press-in of SEM pile to obtain an optimal design of SEM. We analyzed the influence of factors in main theoretical and empirical formulas applied for calculating loosening regions, and carried out FEM analysis to see an appropriate loosening load to the SEM pile. In order to estimate the soil loosening caused by actual SEM-pile indentation and excavation, a steel pipe indentation reduction model test was conducted. Soil subsidence and soil loosening were investigated quantitatively according to soil/steel pipe (H/D).

Development of Wear Model concerning the Depth Behaviour

김형규,이영호,Kim, Hyung-Kyu,Lee, Young-Ho 한국트라이볼로지학회 2005 KSTLE International Journal Vol.6 No.1

Wear model for predicting the vehaviour of a depth is considered in this paper. It is deduced from the energy and volume based wear models such as the Archard equation and the workrate model. A new parameter of the equivalent depth ($D_e$= wear volume /worn area) is considered for the wear model of a depth prediction. A concenpt of a dissipated shear energy density is accommodated for in the suggested models. It is found that $D_e$ can distinguish the worn area shape. A cubic of $D_e$($D_e^3$) gives a better linear regression with the volume than that of the maximmum depth $D_{max}e$($D_{max}^3$) does. Both $D_{max}$ and $D_e$ are used for the presently suggested depth-based wear model. As a result, a wear depth profile can be simulated by a model using $D_{max}$. Wear resistance from the concern of an overall depth can be identified by the wear coefficient of the model using $D_e$.

강제 대류하에서의 알루미늄 응고에 관한 연구

김형규,홍경태,허성강,윤우영 ( Hyung Kyoo Kim,Kyung Tae Hong,Sung Kang Huh,Woo Young Yoon ) 한국주조공학회 1990 한국주조공학회지 Vol.10 No.6

N/A A Solidification of the aluminum was studied under the condition of the forced liquid convection. The Al melt was stirred by a highly rotating carbon bar on whose surface the solidified Al was nucleated. The Al was refined by partial solidification and the solute distributions were rationalized through the estimation of the solidification rate which is based on the heat transfer calculation of the process. The microstructure-morphological change of the specimens was also showed.

Improvement and Verification of the Wear Volume Calculation

김형규,이용호,Kim, Hyung-Kyu,Lee, Young-Ho Korean Tribology Society 2005 KSTLE International Journal Vol.6 No.1

A technique for a wear volume calculation is improved and verified in this research. The wear profile data measured by a surface roughness tester is used. The present technique uses a data flattening, the FFT and the windowing procedure, which is used for a general signal processing. The measured value of an average roughness of an unworn surfnce is used for the baseline of the integration for the volume calculation. The improvements from the previous technique are the procedures of the data flattening and the determination of a baseline. It is found that the flattening procedure efnciently manipulates the raw data when the levels of it are not horizontal, which enables us to calculate the volume reasonably well and readily. By comparing it with the weight loss method by using artificial dents, the present method reveals more volume by aroung 3~10%. It is attributed to the protruded region of the specimen and the inaccuracy and data averaging during the weght loss measurement. From a thorough investigation, it is concluded that the present technique can provide an accurate wear volume.

$37^{\circ}C$에서 incubate 한 가토(家兎) 폐포표면활성물질(肺胞表面活性物質)의 활성도(活性度)의 변화(變化)와 in vitro X 선조사(線照射)의 영향(影響)

김형규,주영은,Kim, Hyung-Kyu,Choo, Young-Eun 대한생리학회 1971 대한생리학회지 Vol.5 No.2

In an attempt to understand the possible effects of temperature and X-irradiation on the activities of surfactant in rabbits, the pulmonary surfactant from the rabbit was subjected to the incubation at $37^{\circ}C$ and X-irradiation with 900r in vitro, and activities of surfactant were measured at 10, 30, 60, and 90 minutes. Tension-area diagram of the lung extract was recorded automatically by the modified Langmuir-wilhelmy balance with a synchronized recording system designed in this Department. A comparison was made with the normal and the following results were obtained. 1) The maximal surface tension, minimal surface tension, width of the tension area diagram at the surface area of 40% and stability index of the normal rabbit lung extract were $31.6{\pm}3.11\;dynes/cm,\;8.2{\pm}0.56\;dynes/cm,\;21.4{\pm}4.40\;dynes/cm\;and\;1.12{\pm}0.22$,respectively. 2) In the $37^{\circ}C$ incubation group, maximal surface tension was similar to the normal value, while minimal surface tension was significantly lower and stability infer was markedly higher than the normal. 3) In the group where X-irradiation of 900r in vitro was applied, maximal surface tension did not differ greatly with the normal or the $37^{\circ}C$ incubation group. The minimal surface tension was significantly lower than the normal but comparing with the $37^{\circ}C$ incubation group, some decrease in minimal surface tension was noted. The width of the tension·area diagram at 40% and stability index in the irradiated group were significantly higher than the normal but a tendency of increase was noted comparing with the $37^{\circ}C$ incubation group.

신장질환자의 약물요법 및 혈액ㆍ복막투석

김형규,Kim, Hyeong-Gyu 사단법인 한국당뇨협회 2005 당뇨 Vol.184 No.-

일반적으로 만성신부전이라고 부르는 상태가 되면 치료의 목표는 신장기능의 악화를 막는 것에서 신장기능악화로 인하여 생기는 합병증을 예방하거나 치료하는 쪽으로 이동하게 된다.

Mobile WiMAX 표준화 동향 및 WiBro 글로벌화 전략

김형규,김현표,Kim Hyeong-Gyu,Kim Hyeon-Pyo 한국통신학회 2006 정보와 통신 Vol.23 No.4

DEA를 이용한 교통사고 잦은 곳 개선사업 효율성 측정방안 연구

김형규,이수범,엄대룡,원동욱,신소명,Kim, Hyung Kyu,Lee, Soo Beom,Eom, Dae Lyoung,Won, Dong Uk,Shin, So Myoung 한국안전학회 2017 한국안전학회지 Vol.32 No.5

Over the past 30 years, the business effects of the improvement project at black spot have been decreasing since 2010, with a reduction in the amount of government spending, coupled with proposing a uniform improvement plan. In order to promote more efficient improvement projects, it is necessary to evaluate the efficiency of local governments and improve the business methods of local governments with low efficiency. However, more sophisticated efficiency analysis methods are needed. Because in previous studies have been limited to the analysis of effects before and after the project through the simple before-after analysis. For this purpose, this study analyzed the efficiency of improvement project at black spot by local governments in Gyeonggi-do using DEA to compare and analyze efficiency in various fields. As a result, Goyang, Seongnam, Paju, Hanam and Yangju showed high efficiency local governments. For local governmetns with low efficiency, the improvement projets to improve efficiency were divided into civil engineering work, structure work, pavement work, additional work and transportation work, and the appropriate construction ratios of each local government were analyzed and presented.