http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
미끄럼 접촉시 구조용 세라믹스의 트라이볼로지적 내구성 평가
김법민(Bup-min Kim),김석삼(Seock-Sam Kim) 한국트라이볼로지학회 2004 한국트라이볼로지학회 학술대회 Vol.38 No.-
구조용 세라믹의 트라이볼로지적 용용을 위해 광범위한 환경하에서 세라믹의 마찰과 마멸특성들이 연구되어 왔다. 이러한 연구를 통하여 구조용 세라믹에 대한 마멸기구들이 폭넓게 이해되고 있으며 이를 응용하기 위해 필요한 트라이볼로지적 거동에 대한 정량적인 데이터를 제시하고 있다. 그러나 아직 구조용 세라믹에 대한 신뢰성은 확립되어 있지 않은 실정이다. 이를 위해서는 세라믹 재료의 트라이볼로지적 거동에 대한 체계적이고도 신뢰할만한 데이터가 필요하다. 본 논문에서는 탄화규소 질화규소 지르코니아에 대하여 ball-on-disk 실험 방법을 이용하여 상온, 대기중, 무윤활에서 마멸실험을 수행하여 정량적인 마멸자료를 구하고자 한다. 미끄럼속도를 일정하게 하고 하중을 변화시키며 실험하였다. 마찰계수와 마멸진행곡전 및 마멸계수의 자료에 대해 고찰하였다. 그리고 마멸율과 표면거칠기 및 세라믹의 기계적, 열적 물성치와의 관계에 대해 고찰하였다.
나노/마이크로 압입 시험에 의한 플라즈마 세라믹 용사코팅의 특성 평가
최세영(Se-Young Choi),채영훈(Young-Hun Chae),김석삼(Seock-Sam Kim) 한국트라이볼로지학회 2003 한국트라이볼로지학회 학술대회 Vol.36 No.-
The most controversial topics in plasma sprayed ceramic coating systems are recently mechanical properties such as bond strength, cohesive strength, toughness and so on. In this research, critical fracture load(Pc) and interface toughness(Ks) of four coatings materials were computed from the applied load, crack length and Young's modulus data which were measured by micro-vickers and nano indentation test. It is reasonable to consider the Pc value as comparison data of bond strength, and the Kc value, considering a trace of indent in the interface, was computed by a modified (E/H)I<SUP>½</SUP> ratio. In the case of the high loads (9.8N and 19.6N) in the Al₂O₃+13%TiO₂ coating, the critical point(Pco) at which the coating was broken was found. Also, used by a XRD phase analysis, we checked a change of coating' s properties, predicting a possible change of the phases in plasma sprayed coating.