T-DMB/AT-DMB 비디오 서비스를 위한 스케일러블 부호화기 모델에 따른 복잡도 및 성능 분석

김진수,김규석,김필중,이시웅,김재곤,최해철,Kim, Jin-Soo,Kim, Kyu-Seok,Kim, Pil-Joong,Lee, Si-Woong,Kim, Jae-Gon,Choi, Hae-Chul 한국정보통신학회 2007 한국정보통신학회논문지 Vol.11 No.11

본 논문에서는 고품질-DMB(Advanced Terrestrial-DMB) 비디오 서비스를 제공하기 위해 SVC(Scalable Video Coding) 부호화기 법을 다룬다. SVC 기저계층으로 T-DMB 서비스와 호환이 되도록 하면서, 향상계층은 공간 확장성을 통하여 AT-DMB 비디오 서비스를 제공할 수 있다. 그러나 SVC 부호화 기법은 매우 복잡하므로, 이를 구현하기 위해서는 SVC 부호화기의 복잡도에 따른 성능 분석이 필요하다. 본 논문에서는 SVC 부호화 파라미터에 따른 성능 변화를 조사하고, 이를 기반으로 3가지 부호화기 모델에 따른 복잡도 및 성능 특성을 모의실험을 통하여 비교 분석한다. This paper presents the SVC(Scalable Video Coding) scheme which enables the AT-DMB(Advanced Terrestrial-DMB) video service in enhancement layer, while keeping the current T-DMB video service in base layer. But, it is very complicate to implement the SVC encoder and so it is necessary to analyze the complexity and performance for SVC encoder#s structures and coding parameters. In this paper, through computer simulations, SVC coding parameters are tested and then, based on these results, three types of SVC encoder models are compared from the viewpoint of the complexity and performance.

실린더에 존재하는 축방향 표면균열에 대한 공학적 J-적분식 (I) - 변형소성에 기초한 방법-

김진수,김윤재,박영재,김영진,Kim, Jin-Su,Kim, Yun-Jae,Park, Yeong-Jae,Kim, Yeong-Jin 대한기계학회 2002 大韓機械學會論文集A Vol.26 No.8

This paper provides an engineering J estimation equation for cylinders with finite internal axial surfacecracks under internal pressure. The proposed equation is the J estimation equation based on deformation plasticity using Ramberg-Osgood (R-O) materials. Based on detailed 3-D FE results using deformation plasticity, plastic influence functions for fully plastic J components are tabulated for practically interesting ranges of the mean radius-to-thickness ratio, the crack depth-to-length ratio, the crack depth-to-thickness ratio. the strain hardening index for the R-O material, and the location along the semi-elliptical crack front. Based on tabilated plastic influence functions, the J estimation equation along the crack front is proposed and validated for R-O materials. Good agreements between the FE results and the proposed J estimation provide confidence in the use of the proposed method to elastic-plastic fracture mechanics of pressurized piping.

학교 이전적지의 적정활용 방안에 관한 연구 - 서울시 은평구 'A' 초등학교를 중심으로 -

김진수,김창신,김현호,동재욱,이화룡,Kim, Jin-Su,Kim, Chang-Shin,Kim, Hyoun-Ho,Dong, Jae-Wook,Lee, Hwa-Ryong 한국교육시설학회 2011 敎育施設 Vol.18 No.1

ent years, the change of urban function and the decrease in birth rate have given rise to merge, abolition and relocation of the existing schools. This study explores the possibilities for various land utilizations of relocated school sites, using the trial case of 'A' elementary school in Eun-pyeong gu, Seoul. 'A' elementary school has happened transfer plan due to the urban development project of the redevelopment area, Eun-pyeong gu in Seoul. Firstly, it studies the land use categories and the development methodologies of 7 relocated school sites happened in Seoul. In addition, it analyzes the land utilization after relocation, development principals, area, building usage and changes in land use regulation. Finally, it proposes the commercial exploitation of school site targeting 'A' elementary school site. Throughout the profit analysis, this study concludes that it is available to exploit the relocated school sites by the variety of development methodologies, especially in a metropolis like Seoul.

실린더에 존재하는 축방향 표면균열에 대한 공학적 J-적분식 (II) - 최적참조응력에 기초한 방법-

김진수,김윤재,김영진,Kim, Jin-Su,Kim, Yun-Jae,Kim, Young-Jin 대한기계학회 2002 大韓機械學會論文集A Vol.26 No.11

This paper provides an reference stress based J estimation equation fur cylinders with finite internal axial surface cracks under internal pressure. In part 1, the J estimation equation based on deformation plasticity using Ramberg-Osgood (R-0) materials is proposed. In this paper, the developed CE/EPRI -type solutions ale then re-formulated based on the reference stress concept. Such a re-formulation provides a simpler equation for J. estimation are then further extended to combined internal pressure and bending. The proposed reference stress based J estimation equation is compared with elastic-plastic 3-D FE results using actual stress-strain data for a Type 304 stainless steel. Good agreement between the FE results and the proposed reference stress based J estimations provides confidence in the use of the proposed method to elastic -plastic fracture mechanics of pressurised piping.

하악 과두 과형성증에 관한 방사선학적 연구

김진수,김영진,최의환,김재덕,Kim Jin-Soo,Kim Young-Jin,Choi Eui-Hwan,Kim Jae-Duk 대한영상치의학회 1995 Imaging Science in Dentistry Vol.25 No.2

Condylar hyperplasia is a self-limiting condition characterized by a slowly progressing, enlargement of the mandible that results in facial asymmetry and a crossbite malocclusion. The facial asymmetry, open bite or crossbite, and radiographic evidence of an enlarged condyle confirm the diagnosis of condylar hyperplasia. The etiology of the condition is unknown. This condition usually first becomes apparent during the second decade of life, when one condyle continues to grow while the other is no longer active. Radiographically, the condyle may appear enlarged or the neck of the condyle maybe elongated or both may occur, Sometimes, however, no radiographically demonstrable condylar abnormality will be noted. Surgical correction with subcondylar osteotomy is the treatment of choice. We have observed two cases of condylar hyperplasia occurred in the left mandibular condyle of 24-year-old and 35-year-old women. We obtained that two cases were shown the followed results; 1. Clinically, both cases was unilaterally developed on C/C area, with temporomandibular disorders and pain, facial asymetry and malocclusion. 2. Radiographically, hyperplastic mass confined to the condyle. 3. Histopathologically, these cases shown increased hypertrophic region in parts, and lamellated bone with irregular trabeculae.

Open-label, Randomized Comparison of the Efficacy of Intravenous Dolasetron Mesylate and Ondansetron in the Prevention of Acute and Delayed Cisplatin-induced Emesis in Cancer Patients

김진수,Ji Yeon Baek,Sook Ryun Park,최인실,Sang-Il Kim,김동완,Seock-Ah Im,Tae-You Kim,허대석,Yung-Jue Bang,Noe Kyeong Kim 대한암학회 2004 Cancer Research and Treatment Vol.36 No.6

Purpose: The aim of this study is to compare the antiemetic efficacy and tolerability of intravenous dolasetron mesylate and ondansetron in the prevention of acute and delayed emesis. Material and Methods: From April 2002 through October 2002, a total of 112 patients receiving cisplatin- based combination chemotherapy were randomized to receive a single i.v. dose of dolasetron 100 mg or ondansetron 8 mg, 30 minutes before the initiation of chemotherapy. In the ondansetron group, two additional doses of ondansetron 8 mg were given at intervals of 2 to 4 hours. To prevent delayed emesis, dolasetron 200 mg p.o. daily or ondansetron 8 mg p.o. bid was administered from the 2nd days to a maximum of 5 days. The primary end point was the proportion of patients that experienced no emetic episodes and required no rescue medication (complete response, CR) during the 24 hours (acute period) and during Day 2 to Day 5 2 days (delayed period), after chemotherapy. The secondary end points included the incidence and severity of emesis. Results: 105 patients were evaluable for efficacy. CR rates during the acute period were 36.0% for a single dose of dolasetron 100 mg, and 43.6% for three doses of ondansetron 8 mg. CR rates during the delayed period were 8.0% and 10.9%, respectively. There was no significant difference in the efficacy between the two groups. Adverse effects were mostly mild to moderate and not related to study medication. Conclusions: A single i.v. dose of dolasetron 100 mg is as effective as three i.v. doses of ondansetron 8 mg in preventing acute and delayed emesis after cisplatin- based chemotherapy, with a comparable safety profile.(Cancer Res Treat. 2004;36:372-376)

서부 경남지역 토마토 농장에서의 위생 미생물의 분포

김진수,심원보,김지훈,김세리,정덕화,Kim Jin-Soo,Shim Won-Bo,Kim Ji-Hun,Kim Se-Ri,Chung Duck-Hwa 한국환경보건학회 2006 한국환경보건학회지 Vol.32 No.1

This study were conducted to investigate the microbial contamination level in 5 tomato farms in Western Gyeongnam. A total of 130 samples was examined for sanitary indicator bacteria, such as aerobic plate count (APC), coliforms, and Escherchia coli, and pathogenic bacteria such as E. coli O157:H7, Salmonella spp., Staphylococcus aureus, and Listeria monocytogenes. APC and coliform count ranged $0\~6.62\;and\;0\~4.52 log_{10}\;CFU/(ml,\;g,\;100\;cm^2,\;hand)$, respectively, and $32.5\%$ were contaminated with E. coli. Especially, most of the samples from employees are high as above $4.0\;log_{10}\;CFU/(ml,\;g,\;100\;cm^2,\;hand)$ in APC. S. aureus, detected at $10.7\%$, was found in employees' hands, irrigation water, and hydroponic solution. whereas E. coli $O157:H7$, Salmonella spp, and L. monocytogenes were not detected. These results will provide fundamental microbiological information for introduction of good agricultural practice (GAP)system in tomato farms.

Pb(Sc1/2Nb1/2)O3-PbTiO3 계 세라믹스의 강유전성

김진수,김소정,김호기,이덕출 ( Jin Soo Kim,So Jung Kim,Ho Gi Kim,Deok Chool Lee ) 한국전기전자재료학회 1997 한국전기전자재료학회 추계학술대회논문집 Vol.1997 No.1

PZT/Metal로 구성된 음향변환기의 음향특성에 관한 연구

김진수,강대하,김소정,김호기,이덕출,Kim, Jin-Soo,Kang, Dae-Ha,Kim, So-Jung,Kim, Ho-Gi,Lee, Deok-Chool 한국음향학회 1992 韓國音響學會誌 Vol.11 No.2

본 연구에서는 압전 특성이 우수한 PZT계 압전세라믹스를 원판상으로 박판화하여 금속 진동판에 부착시킨 PZT/Metal음향변환기를 제작하였다. 이 때 압전 세라믹스를 박판화하기 위해 'tape casting 방법‘을 사용했으며, 제작된 PZT/Metal 음향 변환기를 압전 부자, 압전 스피커등의 소자에 응용 시키기 위해 음향특성을 연구하였다. 연구 결과, 세라믹스의 압전 계수($d_{31}$)이 증가함에 따라 레벨(dB)이 -6dB에서 - 14dB로 증가된다. 음향 변환기의 직경비 ${\eta}$가 0.7-08이고, 두꺼비 (${\beta}$)가 1일 때 최적 음압 특성을 나타냈으며, 음압은 -15~-16dB정도이었다. In the study, the Acoustic transducer of a thin circular disc-type with PZT/Metal was manufactured. The 'tape casting method' was introduced to prepare the thin disc-type of piezoelectric ceramics. The acoustic characteristics of PZT/Metal acoustic transducer for piezoelectric buzzer and piezoelectric speaker etc. have been studied and analyzed. As a result, the sound pressure level (dB), in the range from -6dB to -14dB, increased with increasing the piezoelectric coeffeicient ($d_{31}$) of ceramics. The optimal conditions of the sound pressure characteristics of acoustic transducer were that the radius ratio(${\eta}$) of ceramics and metal plate is 0.7-0.8 and the thickness ratio(${\beta}$) is 1.0, and the value were -15~-165dB.

배관에 존재하는 원주방향 표면균열에 대한 파괴거동 해석 (I) -J-적분 예측식 -

김진수,김윤재,김영진,Kim, Jin-Su,Kim, Yun-Jae,Kim, Yeong-Jin 대한기계학회 2002 大韓機械學會論文集A Vol.26 No.1

This paper provides the fully plastic J solutions for circumferential cracked pipes with inner, semi- elliptical surface cracks, subject to internal pressure and global bending. Solutions are given in the form of two different approaches, the GEF/EPRl approach and the reference stress approach. For the GE/EPRl approach, the plastic influence functions for fully plastic J are tabulated based on extensive 3-D FE calculations using the Ramberg-Osgood (R-O) materials, covering a wide range of pipe and crack geometries. The developed GEf/EPRl-type fully plastic J estimation equations are then re-formulated using the concept of the reference stress approach for wider applications. Based on the FE results, optimized reference load solutions for the definition of the reference stress are found for internal pressure and for global bending. Advantages of the reference stress based approach over the GE/EPRl-type approach are fully discussed. Validation of the proposed reference stress based J estimation equations will be given in Part II, based on 3-D elastic-plastic or elastic creep FE results using typical tensile properties of stainless steels and generalized creep- deformation behaviours.