APPLICATION OF TRAVELING SALESMAN PROBLEM(TSP) FOR DECISION OF OPTIMAL PRODUCTION SEQUENCE

Chang, Kun Soo,Yeo, Yeong Koo,Chang, Jin Yang,Kim, Kil Su,Jeong, Eun Young,Oh, Sea Cheon 한국화학공학회 1997 Korean Journal of Chemical Engineering Vol.14 No.5

In the present study a reliable and structural decision system for production sequence of polymeric products is developed. Minimization of the amount of off-specs are the main objective in the decision of production sequence to maximize profit. Off-specs are generated when the production sequence of polymeric products is changed. The amount of off-specs depends on changes of product grades. In the present study we applied the traveling salesman problem (TSP) to achieve optimal decision of production sequence. To solve the optimal decision problem formulated by TSP, we employed three different approaches such as Branch and Bound (B&B) method. Dynamic Programming (DP) method and Hopfield Neural Network (HNN) method. Production sequences computed based on the actual plant off-spec data were compared with the sequences employed in the actual plant operation. From the comparison the decision method proposed in the present study showed increased profits and reduced off-specs.

Dynamic Young's Modulus and Internal Friction in Polycrystalline Copper

Kang, Chang-Seog,Chang, Si-Young,Hong, Sung-Kil 대한금속재료학회 2003 METALS AND MATERIALS International Vol.9 No.5

An attempt has been made to measure the temperature dependence of dynamic Young's modulus together with the related variation of internal friction in polycrystalline copper. A mechanical spectroscopy study was employed using a standard servo hydraulic fatigue testing machine equipped with a scanning laser extensometer. Dynamic Young's modulus and internal friction were measured over a temperature range of 298 to 873 K at very low frequencies of 0.1, 0.05, and 0.01 Hz. One internal friction peak was observed over the ranges 450 to 700 K, together with marked decreases in the dynamic Young's modulus in the same temperature range. From a quantitative analysis of the experimental data with the relaxation strength, relaxation time, and activation energy, it is concluded that the peak phenomenon is due to grain-boundary sliding relaxation.

Multiple myeloma 환자에서 Bortezomib치료 후 발생한 마비성 장폐색증 1례

김준영,이원식,손창학,박성길,진한영,박석주,조영완,정은욱,강명주,박정하,주영돈 인제대학교 2006 仁濟醫學 Vol.27 No.-

Bortezomib is the first clinically available proteasome inhibitor that is clinically effective in the treatment of multiple myeloma. A proteasome inhibitor acts through multiple mechanisms to arrest tumor growth, tumor spread, and angiogenesis. The main adverse effects of bortezomib are gastrointestinal symptoms, cytopenia, fatigue, and peripheral neuropathy. To date, severe paralytic ileus has not been reported as a toxic effect of bortezomib treatment in multiple myeloma. Bortezomib is a novel agent that has only been used clinically for 30 months, so a need exists to further evaluate its toxicity. We report a case of grade Ⅲ (NCI CTCAE v3.0) or grade Ⅳ(SWOG toxicity criteria) paralytic ileus in a 65-year-old man with relapsed multiple myeloma who underwent one cycle of single-agent bortezomib treatment scheduled in a 21-day cycle (1.3 mg/㎥ as a single i.v. bolus on days 1, 4, 8, and 11).

Short Communication : Application of Traveling Salesman Problem (TSP) For Decision of Optimal Production Sequence

( Eun Young Jeong ),( Sea Cheon Oh ),( Yeong Koo Yeo ),( Kun Soo Chang ),( Jin Yang Chang ),( Kil Su Kim ) 한국화학공학회 1997 Korean Journal of Chemical Engineering Vol.14 No.5

In the present study a reliable and structural decision system for production sequence of polymeric products is developed. Minimization of the amount of off-specs are the main objective in the decision of production sequence to maximize profit. Off-specs are generated when the production sequence of polymeric products is changed. The amount of off-specs depends on changes of product grades. In the present study we applied the traveling salesman problem (TSP) to achieve optimal decision of production sequence. To solve the optimal decision problem formulated by TSP, we employed three different approaches such as Branch and Bound (B&B) method. Dynamic Programming (DP) method and Hopfield Neural Network (HNN) method. Production sequences computed based on the actual plant off-spec data were compared with the sequences employed in the actual plant operation. From the comparison the decision method proposed in the present study showed increased profits and reduced off-specs.

정신분열병에 대한 리스페리돈의 효과 및 안정성

이민수,김용구,김영훈,연병길,오병훈,윤도준,윤진상,이철,정희연,강병조,김광수,김동언,김명정,김상훈,김희철,나철,노승호,민경준,박기창,박두병,백기청,백인호,손봉기,손진욱,양병환,양창국,우행원,이정호,이종범,이홍식,임기영,전태연,정영조,정영철,정인과,정인원,지익성,채정호,한상익,한선호,한진희,서광윤 大韓神經精神醫學會 1998 신경정신의학 Vol.37 No.1

연구목적 : 본 시험의 목적은 임상시험 시작전에 연구자들을 대상으로 PANSS Workshop을 통하여 PANSS, ESRS에 대한 국내에서의 표준화 작업을 구축하고 새로운 정신병 치료제인 리스페리돈의 효과와 안정성을 재확인하여 리스페리돈 사용에 대한 적정화를 이루는데 있다. 연구방법 : 1996년 4월부터 1996년 9월까지 국내 39개 대학병원 정신과에 입원중인 혹은 증상이 악화되어 입원하는 정신분열병 환자 377명을 대상으로 다시설 개방 연구를 시행하였다. 1주일간의 약물 배설기간을 가진후, 리스페리돈을 8주간 투여하였고, 기준점, 1주, 2주, 4주, 그리고 8주후에 평가되었다. 용량은 제1일에는 리스페리돈 1mg씩 1일 2회, 제2일에는 2mg씩 1일 2회, 제3∼7일에는 3mg씩 1일 2회 투여하였다. 이후 환자의 임상상태에 따라 임의로 증량할 수 있으며, 최대 일일 16mg을 초과하지 않도록 하였다. 추체외로 증상을 조절하기 위한 투약을 허용하였다. 임상증상 및 부작용의 평가는 PANSS(Positive and Negative Syndrome Scale), CGI(Clinical Global Impression) 그리고 ESRS(Extrapyramidal Symptom Rating Scale)을 사용하였다. 연구결과 : 377명중 343명(91%)이 8주간의 연구를 완결하였다. 치료 종결시점인 8주후 PANSS 총점수가 20% 이상 호전된 경우를 약물 반응군으로 정의할때, 약물반응군은 81.3%였다. 리스페리돈에 반응하는 예측인자로는 발병연령, 이전의 입원 횟수, 유병기간이 관련 있었다. 리스페리돈은 1주후부터 PANSS양성, 음성, 및 일반정신병리 점수상에 유의한 호전을 보여 효과가 빨랐다. CGI의 경우도 기준점에 비해 1주후부터 유의한 감소를 나타내었다. ESRS의 경우, 파킨슨 평가점수는 기준점과 비교해 투여 1주, 2주, 4주후 유의하게 증가되었다가 8주후 기준점과 차이가 없었다. Dystonia 평가점수는 1주후만 유의한 증가를 보였으며, dyskinesia 평가점수는 유의한 차이가 없었다. 혈압, 맥박수의 생명징후 및 일반 혈액학 검사, 생화학적 검사, 심전도 검사에서 유의한 변화는 없었다. 결 론 : 이상의 다시설 개방 임상 연구를 통해 리스페리돈은 정신분열병 환자에서 양성증상뿐만 아니라 음성증상 및 전반적인 증상에도 효과적인 것으로 사료된다. 보다 명확한 평가를 위해서는 다른 항정신병약물과의 이중맹검 연구가 필요할 것으로 생각되며, 또한 장기적 치료에 대한 평가도 함께 이루어져야 하겠다. Objective : The purpose of this study was to investigate the efficacy and safety of risperidone in the treatment of Korean schizophrenic patients. Method : This multicenter open study included 377 schizophrenic patients drawn from 39 university hospitals. After a wash-out period of 1 week, the schizophrenic patients were treated with risperidone for 8 weeks and evaluated at 5 points ; at baseline, and 1, 2, 4 and 8 weeks of treatment. The dose was increased from 2mg/day(1mg twice daily) to 6mg/day(3mg twice daily) during the first week and adjusted to a maximum of 16mg/day over the next 7 weeks according to the patient's clinical response. Medication to control extrapyramidal symptoms was permitted. The psychiatric and neurological status of the patients was assessed by PANSS, CGI, and ESRS scales. Results : 343(91%) of 377 patients completed the 8-week trial period. Clinical improvement, as defined by a 20% or more reduction in total PANSS score at end point, was shown by 81.3% of patients. The predictors of response to risperidone were associated older age, shorter duration of illness, fewer previous hospitalization. Risperidone had rapid onset of action ; a significant decrease of the total PANSS and three PANSS factor(positive, negative, general), and CGI was already noticed at the end of first week. For the ESRS, parkinsonism rating scores were significantly increased until week 4 comparing with baseline. Dystonia rating scores were significantly increased until week 1, and dyskinesia rating scores were not significantly changed during the study. Laboratory parameters including vital sign, EKG, hematological, and biochemical values showed no significant changes during the trial. Conclusions : This study suggests that risperidone is generally safe and effective against both the positive and negative symptoms in our group of patients.

Finding key vulnerable areas by a climate change vulnerability assessment

Kim, Ho Gul,Lee, Dong Kun,Jung, Huicheul,Kil, Sung-Ho,Park, Jin Han,Park, Chan,Tanaka, Riwako,Seo, Changwan,Kim, Ho,Kong, Wooseok,Oh, Kyusik,Choi, Jinyong,Oh, Young-Ju,Hwang, Gangseok,Song, Chang-Keun Springer Netherlands 2016 Natural hazards Vol.81 No.3

<P>Extreme climate events such as typhoons, heat waves, and floods have increased in frequency with climate change. Many municipalities within the Republic of Korea (ROK) have experienced damage from these events, necessitating countermeasures. Vulnerability assessment has been suggested in the implementation of a national plan for reducing damage resulting from climate change. Thus, in this study, we assess the vulnerability of the ROK and identify key vulnerable municipalities in support of the national adaptation plan. We create a framework for assessing the vulnerability of all 232 municipalities of the ROK with respect to 32 items in 7 fields. The framework regards decision makers' comprehension and availability of data as important factors. We assess the vulnerability index of each municipality by using variables of climate exposure, sensitivity, and adaptation capacity. The weights of variables are determined by the Delphi method. We used the representative concentration pathways 8.5 climate scenario to reflect future climate exposure for the vulnerability assessment. From the analysis, vulnerability maps are prepared for the 32 items of 7 fields, and key vulnerable municipalities are identified by aggregating the maps. The distribution of vulnerable municipalities changes with the future climate conditions. These maps provide a scientific and objective basis for the ROK government to establish adaptation plans and allocate resources. The ROK government can utilize the results to identify the characteristics of highly vulnerable areas, and municipalities can use the results as a basis for requesting support from the national government.</P>

太陽熱 消毒에 의한 양배추 시들음병 防除 效果

張田益,秦石天,文英仁,姜榮吉 제주대학교 아열대농업연구소 2000 亞熱帶農業硏究 Vol.17 No.-

This study was conducted to evaluate the efficacy of soil solarization, alone and combined with various treatments for the control of soil-borne diseases of cabbage at Cheju from 1988∼ 1999. The results obtained are summarized as follows ; 1.The average of maximum soil temperature at the l0cm depth under soil sruface from Aug. 4 to Sept. 3, 1998 were 6.5℃ higher under polyethylene(P.E.) film mulch compared with 35.4℃ of control. The maximum soil temperatures of above 40℃ at the 10cm depth were recorded for 23 days in the P.E. film mulch. 2.The infection rate of F. oxysporum wilt of cabbages grown after the treatment of disinfector dazomet+P.E. film mulch, was lowest, followed by manure+P.E. film mulch, and alone P.E. film mulch. 3.The leaf length of cabbages grown after P.E. film mulch were greater compared with untreated control but head weight showed no difference between P.E. film mulch and control.

熱處理에 의한 양배추 시들음병 防除

張田益,秦石天,文英仁,姜榮吉 제주대학교 아열대농업연구소 2000 亞熱帶農業硏究 Vol.17 No.-

This study was conducted to evaluate the efficacy of soil heating treatment for the control of cabbage yellows. The results obtained are summarized as follows ; 1.The density of Fusarium oxysporum was not changed with time at room temperature while it was not isolated 25 and 5 days after the heating treatment of 35 and 40℃, respectively. However any of it was not detected above 45℃. 2.When cabbage was grown in the soil inoculated with the pathogen after the inoculated soil was incubated for 1, 3, 5 and 7 days at 45℃, Fusarium oxysporum wilt was not observed for cabbage grown in the soil incubated for more than 3 days. 3.Pseudomonas sp. and Bacilus sp. antagonists that show antifungal activity to were Fusarium oxysporum in petri dish assays were isolated. The growth temperature of Bacillus sp. was higher than that of Fusarium oxysporum.

PC 斜張橋의 設計 · 施工에 關한 硏究

張永吉 瑞逸專門大學 1991 論文集 Vol.9 No.-

Sprinkler 撤水의 實驗的 考察 (I) : Sprinkler의 噴頭丘力과 撤水性能에 關한 硏究 Study on the Nozzle tressure and stray Tatbility of Sprinkler

張永吉 瑞逸工業傳門大學 1979 論文集 Vol.1 No.1

This experiments were carried out to investigate differences of the pressure connect with the nozzle-turn, sprayingdepth and sprinkler-distance of Common Sprinkler. The exprimental results are summarized as fallows. 1. The difference of pressure was occured at 0.05~0.23kg/㎠ spraying-loss to install one nozzle. 2. Under the change of pressure, the difference of spraying-depth showed at 3.7mm/hr with 1.6kg/㎠ sprinkler pressure, 3.0mm/hr with 1.0kg/㎠ And also the number of sprayer-turning was 108 and 102 respectively. 3. The faster the pivot of sprinkler turns under the same pressure, the more sprays quantity required. 4. The maximum spraying distance and spraying-depth showed at 1.6kg/㎠ the Common Sprinkler Pressure. 5. When the pressure of spraying was 1.0 to 1.6kg/㎠ the most optimum nozzle interval were found 18 to 20m, because the average depth of spraying is 3.05mm/hr at the spot of 8 to 9m a diamoter.