주요우울증이 근로자의 생산성에 미치는 영향 : WHO-HPQ(Health and Work Performance Questionnaire)를 이용한 예비연구

김원,황태연,함병주,이준석,최병휘,김세주,서용진,강은호,우종민 大韓神經精神醫學會 2007 신경정신의학 Vol.46 No.6

Objectives : Major depressive disorder (MDD) causes patients' distress and makes socioeconomic burden, both directly and indirectly. We used the concept of lost productive time (LPT) to estimate the indirect costs and calculated both absenteeism and presenteeism among workers with MDD. Mcthods : Depression group was recruited from workers visiting psychiatric outpatient clinic who had MDD without major physical or mental disorders (N= 106). Age and sex matched healthy control group was also recruited through advertisement (M=100). All participants completed a interview using WHO Health and Work Performance Questionnaire (HPQ), Job Stress Measurement Scale for Korean Employees, and Hamilton Rating Scale for Depression. Statistical analysis was performed with independent t-test or χ² test as characteristics of values (p=0.05). Results : The number of absence (0.94-day/month vs. 0.10-day/month, P=0.015) andthe numberofearly leaving (2.56-day/month vs. 0.24-day/month, P<0.001) were significantly higher in the depression group. Depression group evaluated their Perfor-mance level much lower than controls with significant value (5.16 vs. 7.62, P<0.001). In addition, depression group estimated their performance level during the last 4 weeks lower compared to the level of past 1-year (5.16 vs 6.63, P<0.001). The estimated costs of absenteeism in depression group were higher than controls by 2,520,000 Korean Won per year, and those of presenteeism were also higher by 4,880,000 Korean Won per year. The total costs of LPT in depression group were higher than controls by 7,400,000 Korean Won, which corresponds to 26% ofmean annual salary. In addition, the level of occupational stress, such as high demand and interpersonal conflict, was higher in the depression group. Conclusion : Major depressive disorder costs substantial productivity loss to workers and their company. Presenteeism imposes more time cost than absenteeism. Effectiveness trials are needed to devise cost-effective programs for the early detection and treatment of depression at the workplace.

자발성 기흉을 동반한 폐림프관평활근종증 1예

안용환,정종훈,김소영,김휘정,김학렬,양세훈,최순호,문형배,조향정,정은택 圓光大學校 醫科學硏究所 2005 圓光醫科學 Vol.20 No.1

우리나라 자생낙엽관목의 조경소재 확대방안에 관한 연구 : 중부 지방을 중심으로 Focused on the Middle Area of Korea

신용모,오휘영,김선영 한국전통조경학회 2003 한국전통조경학회지 Vol.21 No.4

The development and exploitation of the native deciduous shrubs which are widely distributed in our fields and mountains, have been adapted to the climate and natural features in Korea for a long length of time. With respect to managerial aspects, the native deciduous shrubs can be seen to be very useful and needed while fully reflecting Korean indigenous emotions as well as having high environmental acceptability and being very resistant to damages by blight and harmful insects. Especially those shrubs are placed in an important position in the process of ecosystem restoration and plant succession. Accordingly, this study has researched and analyzed the utilization condition of the present Korean landscape plants with documents and model cases of significant landscape features, evaluated the values by which each kind of tree is applied as landscape materials, and selected applicable kinds of trees, after drawing applicable native deciduous shrubs based on the documents and selecting five sample features for the test planting. The number of the selected kinds of trees is 20, including Viburnum dilatatum Thunb., Echinosophora koreensis Nakai, Lonicera maackii Max., Lonicera vesicarpa Kom., Stephanandra incisa Zabel, Ribes fasciculatum var. chinense Max., Spiraea salicifolia L., Campylotropis macrocarpa Rehder, Symplocos chinensis var. pilosa (Nak.) Ohwi, Abelia mosanensis T. Chung, Berberis amurensis Rupr., Deutzia coreana Lev., Alangium platanifolium var. macrophylum (S. rt Z.) Wanger., Viburnum sargentii Koehne, Rhodotypos scandes (Thunb.) Makino, Viburnum carlesii Hemsl., Forsythia nakaii T. Lee, Syringa velutina var. kamibayashii T. Lee, Rosa multiflora Thunb. and Spiraea fritschiana Schneid. I analyzed characteristics of each tree and presented methods applicable to the landscape architecture in its growth environment, planting type and ecological landscape.

슬래그 골재를 사용한 투수성 콘크리트의 물리적 성질

이용구,김희덕,성휘정,최재진 호서대학교 반도체제조장비국산화연구센터 2001 반도체장비학술심포지움 Vol.2001 No.-

본 연구는 제철소에서 부산물로 생성되는 고로슬래그 및 제강슬래그를 골재의 일부로 대체 사용하고 고성능AE감수제를 적정량 사용하여 고품질의 투수성 콘크리트를 제조하는 것에 관한 것이다.실험결과 고성능AE감수제와 슬래그를 사용하는 경우 투수계수 0.1 ㎝/sec 이상을 유지하는 상태에서 재령 28일의 압축강도 240 ㎏f/㎠ 정도까지의 비교적 높은 강도의 투수성 콘크리트를 경제적으로 제조할 수 있음이 확인되었다.

자동차차체 및 부품제조업 산업장의 작업환경실태에 관한 조사 연구

서준호,문덕환,김정호,이채관,황용식,손병철,김대환,이창희,김휘동,이채언 인제대학교 백병원 2002 仁濟醫學 Vol.23 No.5

Objectives: For the purpose of preparing the fundamental data and control the working environment and assessing the status of working environmental in manufacturing industry of bodies for motor car and of parts. Methods and Materials: Accessories for motor car and its engines the auther measured the noise level, concentration of dust, heavymetals, organic solvents, chemicals to 99 industries(24 working processes) form Feb. 2000 to Oec. 2000. Results: The results were as follows : 1. Mean noise level cutting, grinding, pressing, foundries and shot-blast was exceeded to threshold limit value(TLV) of noise. 2. Mean concentration of total dust was not exceeded to TLV. 3. Mean concentration of Mn in welding process and Pb in drying, welding, fabricating, rolling was exceeded to TLV. 4. Mean concentration for chemicals and organic solvents were not exceeded to TLV. 5. Mean concentration of dust and heavymetals were statistical significant difference between with local ventilation system and without local ventilation system. Conclusion: Above results, author suggest to prepare more passively control to working environment where exceeded the TLV.

폐결핵의 조기진단에 있어서 이중중합효소연쇄반응법의 유용성

조성란,최영진,김용훈,이철세,김영창,김휘준 순천향의학연구소 1998 Journal of Soonchunhyang Medical Science Vol.4 No.2

Background: Pulmonary tuberculosis is a great public health problem in Korea. Early detection of Mycobacterium tuberculosis (M. tuberculosis) in clinical samples becomes more and more important in the control of tuberculosis. Recently, molecular methods have been applied to early detection of M. tuberculosis. Methods: To elucidate the effectiveness of nested polymerase chain reaction (PCR) in early diagnosis of pulmonary tuberculosis, we peformed Acid-fast bacilli (AFB) stain, AFB culture, and nested PCR on 84 sputa. Results: 8 (9.5%) specimens were positive by AFB stain, 17 (20.2%) by AFB culture, and 15 (17.9%) by nested PCR. Using AFB culture as standard method, the sensitivity of AFB stain and nested PCR was 47.1% and 82.4%, respectively. The specificity of AFB stain and nested PCR was 100% and 98.5%, respectively. Conclusions: Nested PCR was more sensitive than AFB stain and had shorter processing time(24-48hrs) than AFB culture. So it may be effective to use nested PCR in order to detect M. tuberculosis when AFB smear Is negative.

도장작업시 유해인자들의 노출수준과 작업환경관리실태

이세기,문덕환,이채관,황용식,선병관,손병철,김대환,이창희,김휘동,이채언 인제대학교 백병원 2002 仁濟醫學 Vol.23 No.5

Objectives: For the purpose of preparing the fundamental data and assessing the status of exposure level of chemical substances in painting process. Methods and Materials: The author determined the concentration of organic solvents, lead(Pb), Chromium(Cr), and Toluene-2, 4-diisocyanate(TDI) in air of painting process to 90 industries classified by 15 types of manufacturing industry during a period from Jan. 1st 2001 to Dec. 31st 2001. Results: The results were as follows: 1. The geometric mean level of each chemical substance was 0.1706 ppm for exposure index in organic solvents, 0.0019㎎/㎥ for Pb, 0.0024 ㎎/㎥ for Cr, and 0.0004ppm for TDI, respectively. 2. The exposure level of each chemical substances by type of painting was the highest in dipping and brush painting for organic solvent, in spray-painting for TDI, and in spray gun-painting for Pb and Cr, respectively. 3. The exposure level of each chemical substances by type of local ventilation equipment was higher in enclosed and booth type for organic solvents. Cr, and TDI, and in exterior type for Pb, respectively than those of other types. 4. The exposure level of each chemical substances by type of hazardous material arresting media was higher in using water for organic substances, in using bag filter for Pb, TDI, respectively than those of other types. Conclusion: According to above results, this study suggests that the exposure level by type of industry exceeded the exposure level in wooden furniture and metal furniture manufacturing industry for organic solvents and Pb, respectively.

미용사들의 이직욕구에 관한 연구 : 직무스트레스, 근골격계 증상을 중심으로 Focusing on Musculoskeletal Symptoms and Occupational Stress

서은경,문덕환,박명희,김정원,황용식,손병철,김대환,이창희,김휘동,이채언 인제대학교 백병원 2002 仁濟醫學 Vol.23 No.5

Objective : This study was conducted to prepare the fundamental data on desire of job transfer in hairdresser and prevent the health impairment of hairdresser due to occupational stress and musculosketetal symptoms. Methods and Material : The author surveyed the desire of job transfer and muscurlosketetal symptoms and occupational stress with self-reported questionnaire to 105 hairdresser who were working in beautyshop of Busan area and also 121 student in department of cosmestology as control group. Results : The results were as follows: 1. The rates of self reported symptom were 81.0% for shoulder, 72.4% for back, 67.6% for knee, 58.1% for hand in hairdresser, and 79.3% for shoulder, 71.9% for back, 66.9% for neck, 64.5% for hand and knee in student. 2. The rate of musculoskeletal symptom by NIOSH criteria was 36.2% in hairdresser, it was higher than student group(24.8%)(p<0.1). Occupational stress of the groups by occupational stress category was high as decision latitude, skill discretion, psycological job demand, decision authority in order. 3. The results of logistic regression of related varibles with desire of quitting job by logistic regression were statistical bordline significance between desire of quilting and social support(p<0.1). Conclusion : As above results, the author suggest to prepare the preventive program an musculoskeletal symptoms in hairdresser, especially shoulder, and also to control the occupational stress to hairdresser in beauty shop because occupational stress can be a factor of desire of quitting job.

퍼머제의 중금속 농도에 관한 연구

윤복연,문덕환,박명희,황용식,함성애,손병철,김대환,이창희,김휘동,이채언 인제대학교 백병원 2002 仁濟醫學 Vol.23 No.5

Objective : This study was conducted to prepare the fundamental data on heavy metal concentration in hair permanents agents and to prevent the health impairment due to heavy metal. Methods and Material : The author determined of 5 heavy metals(Pb, Cr, Mn, Ni, and Cu) concentration hair permanent agents in the market with flameless atomic absorption spectrophotometer. Results : The results were as follows: 1. The geometic mean concentrations of total subjects were 0.04㎍/g for Pb, 0.09㎍/g for Cr, 0.06㎍/g for Mn, 0.03㎍/g for Ni, and 0.04㎍/g for Cu. 2. The most highest mean concentrations of heavy metals in hair permanent agents by using type were Cr for wave agent and straight cream agent, Cu for setting iron agent, Cr and Cu for coating perm agent. 3. Metal most hlghest mean concentrations of heavy in hair permanent agents by type of color was green for Cu. 4. The mean concentration of Cu among 5 heavy metals in hair permanent agents by marker was most highest. 5. There was most statistically significant difference on mean concentration in hair permanent agents between domestic and foreign products. 6. The exposure amount of heavy metal concentration by one time using the permanent agent were 4.O㎍ for Pb, 9.O㎍ for Cr, 6.0㎍ for Mn, 3.O㎍ for Ni and 4.0㎍ for Cu. Conclusion : As above results author suggest to prepare the preventive program of health impairment due to heavy metal by long term chronic exposure to who were using the hair permanent agents hair designer and customers.

도금사업장의 작업환경의 유해인자 노출수준에 관한 연구

문덕환,도수영,이채관,황용식,선병관,손병철,김대환,이창희,김휘동,이채언 인제대학교 백병원 2002 仁濟醫學 Vol.23 No.5

Objective : For the purpose of preparing the fundamental data and assessing the status of exposure level of chemical substances and physical agents. Methods and Material : Such as noise, two types of dust, four types of metals, seventeen types of organic solvents, and four types of other materials classified by specific chemical substances in 21 metal product plating factories classified by 28 processes. The author determined exposure level on those hazardous materials from Jan. to Dec. 2001. Results : The results were as follows: 1. The exposure level for noise was exceeded to Threshold Limit Value(TLV) in the process of 6 cases of Machining, 5 and 4 cases of pre and post-buffing, and 6 cases of waterdrop-removing, the mean noise level of all of processes was not exceeded to compliance level. 2. The exposure level for dust was not exceeded to TLV at all. 3. The exposure level for Chromium(Cr) was exceeded to TLV in Chromium plating process, metal exposure level including Zinc(Zn), Manganese(Mn), and Lead(Pb) was not exceeded to TLV. 4. The exposure level of toluene in case of organic solvents was exceeded to TLV in 1 case of finishing/cleaning, coating/developing process, respectively. 5. The exposure level of four types of other materials classified by specific chemical substances were not exceeded to TLV. 6. The exposure level for dust and metal including Zn, Mn, and Pb was decreased in comparison with two results of air monitoring performed. There was no difference of the exposure level for Cr, noise, and four types of other materials classified by specific chemical substances, and the exposure level for organic solvents was slightly increased. 7. The exposure level for noise in factories employing more than 21 workers was higher than that for noise in foadtories employing less than 20 workers. The more workers, the lower exposure level in metal including Zn, Mn. The exposure level for Cr was increasing in factories employing more than 51 workers, and the more workers the lower exposure level in organic solvents. Conclusion : According to above results, this study suggests positive work environment managements in processes exceeding exposure limit value as well as continuously consecutive work environment management in processes not exceeding exposure limit value and revealing no chronological difference of exposure level should be needed.