재해사례분석을 통한 빌딩공사 재해 특성

이종빈,노민래,고성석 한국안전학회 2004 한국안전학회지 Vol.19 No.3

Recently, construction work's tendency has become a high-rise building, a complexity and a large size. According to the KOSHA data, construction work accidents have not been decreased. Looking at from the side of accident, accidents of construction industry are occupied over 1/3 among all industry accidents. Therefore, this study will analyze the accident of the building construction work from the data of KOSHA which were collected during 11 years(1992 -2002) data relating to serious accidents of the building construction work, suggest the counterplan according to the each work type in building construction work.

잇꽃 Carthamin의 초임계 추출 및 농축

이종민,마상동,한태룡,김공환,임상빈,정인식 경희대학교 생명자원과학연구원 1997 遺傳工學論文集 Vol.9 No.-

Supercritical fluids (SCF) are useful substances that are recently used in bioseparation process. Extraction of carthamin from safflower using supercritical carbon dioxide were examined at various conditions of temperature (35∼40℃), pressure (3000∼5000 psi) and CO₂ flow rate (900∼1200 m/hr). SCF was less effective than solvent methods in carthamin extraction from safflower. Concentration of carthamin was 50% more efficent at the use of alginate beads with 35 g cellulose per column loadings compared to the control (15g cellulose per column loadings).

복합소재를 이용한 도로시설물 디자인

이명호,박종빈 강원대학교 부설 석재복합신소재 제품연구센터 2000 석재연 논문집 Vol.5 No.-

볼라드는 주ㆍ정차의 구분이 애매한 우리나라의 교통문화 속에서 보행고간 및 휴식공간에 차량의 무질서한 주ㆍ정차를 방지하는 기능을 가지고 있다. 선진 외국의 경우 오래전부터 볼라드의 설치를 의무화하고 있으나 최근에 와서야 우리나라에서도 적극적으로 설치하고 있다. 본 연구는 볼라드의 기능적인 면을 기본으로 환경디자인 관점에서 다양한 디자인의 개발을 통해 심미성 및 조형성을 강조하고 재료의 다양성을 추구하여 내구성을 높였다. Bollard has a function, under the circumstance of Korean traffic culture in which the demarcation between parking and stopping cars is obscure, that prevent the cars from disordered parking and stopping in the walking and resting areas. Advanced foreign countries have made it a rule to install the bollard for a long time, while, recently in Korea,, the bollards are being installed aggressively. This was based on the functional aspects of the bollards : I developed various designs, in the view point of environment design, to emphasize the esthetical and the formative points, and also increased the endurance of installation by pursuing the variety of materials.

순천만 갯벌의 식생에 관한 연구

김종욱,임현빈,김하송,이점숙,임병선 木浦大學校 沿岸環境硏究所 1998 沿岸環境硏究 Vol.15 No.1

순천만 조간대 염생식물조사를 위하여 주요 염생식물군락을 선정하고 식생분포 및 현존량을 조사하였다. 우점군락은 갈대군락(Phragmites communis community), 칠면초군락(Suaeda japonica community), 부들군락(Typha orientalis community), 나문재군락(Suaeda asparagoides community), 모새달군락(Phacelurus latifolius community), 가는갯능쟁이군락(Atriplex gmelini community), 갯잔디군락(Zoysia sinica community), 갯질경군락(Limonium tetragonun community) 및 실망초군락(Erigeron bonariensis community)으로 구분되었다. 칠면초군락은 순천만지역에서 가장 넓게 분포하고 있으며, 군락의 높이는 25∼38cm, 식피율은 90∼100%, 단위면적당 368∼608개체/㎡이었고, 갈대군락의 높이는 100∼250cm, 식피율은 85∼100% 및 단위면적당 320∼368개체/㎡으로 순천만 하구 주변을 중심으로 분포하고 있으며, 해안 염소택지와 하구 기수역을 중심으로 생육하고 있었다. The coastal vegetation was classified by the Braun-Blanquet's method at the wetland of Suncheon-Man. The vegetation of the study area was classified with 9 coastal communities as follows : Phragmites communis community, Suaeda japonica community, Typha orientalis community, Suaeda asparagoides community, Phacelurus latifolius community, Atriplex gmelini community, Zoysia sinica community, Limonium tetragonun community and Erigeron bonariensis community. Suaeda japonica community was major dominant species and was 25∼38cm in height, 90∼100% in cover and 368∼608 individuals per ㎡, and Phragmites communis community was 100∼250cm in height, 85∼100% in cover and 320∼368 individuals per ㎡.

우리나라 지역 직업성질환 감시체계의 현황과 전망

임종한,장성실,김성아,문재동,채창호,홍윤철,김수영,김진석,김영욱,한상환,이혜숙,원종욱,송동빈,하은희,강성규 대한산업의학회 2001 대한직업환경의학회지 Vol.13 No.2

기존의 특수건강진단과 작업환경측정을 통한 직업병 관리가 진폐증, 소음성난청 등의 소수 특정질환에 국한되고 실제 직업병 발생 규모 파악이나 신종 직업병의 발견에 한계를 보인다는 사실은 산업의학전문가들 사이에서도 공감을 이루고 있다. 미국과 영국 등에서의 직업성질환 감시체계에 대한 경험은 우리 나라의 직업성질환 감시체계 구축에도 새로운 자극제가 되면서, 1998년이후 인천, 대전, 여천, 구미, 부울경 지역에서 지역 직업성질환감시체계를 산업보건관리의 중요한 시스템으로 구축하려는 노력이 확산되고 있다. 새로이 구축되어지는 이들 지역 직업성질환 감시체계는 감시하고자 하는 대상질환, 활용 가능한 인적자원 및 자료원, 지역 의료체계의 특수성 등에 따라서 목적과 방법을 달리하면서 독특한 형태로 발전을 하고 있다. 각 지역단위 감시체계들이 그 상황에 맞게 독특한 목적과 전략들을 발전 시키면서도, 향후 발전할 국가적인 차원의 직업성질환 감시체계 구축을 위하여 직업성질환 감시의 기본 전략 등을 공유하는 등의 노력이 필요하다. 환례 정의 및 기본적인 등록 서식의 공유, 직업성질환 감시 자료원의 발굴, 공동의 정보 네트워크 및 직업성질환 감시 데이터베이스 구축 등 직업성질환 감시활동을 지원하기 위한 여러 기초 인프라 구축에 힘을 모아야 할 것이다. 우리 나라에서 직업성질환 감시체계를 성공적으로 구축하기 위해서는 수집된 자료의 질 관리를 위한 직업성질환 감시의 원칙 제정과 감시 전략의 공유 등이 필요하며, 전국적인 직업성질환 감시체계의 하부구조라고 할 수 있는 지역감시체계의 기초 토대 마련과 강화작업이 절실하게 필요하다.

동일한 시료에 대한 국내 기관간의 STR 분석결과 비교 : STR 유전자좌 분석법의 표준화 설정을 위하여

박종태,신경진,양윤석,우광만,이숭덕,이승환,이정빈,정연보,조승희,한길로,한면수,홍승범 大韓法醫學會 2001 대한법의학회지 Vol.25 No.1

This paper described a collaborative exercise intended to see what kinds of short tandem repeat (STR) loci are used in different DNA typing laboratories in Korea and to compare their results for the demonstration whether uniformity of DNA profiling results from different laboratory could be achieved in Korea Laboratories were asked to test five tissue DNAs using methods routinely used in each laboratory and to report the results to the coordinating laboratory. The exercise demonstrated that each laboratory was using different STR loci for the typing with different STR numbers,2 VNTRS,36 STRs and amelogenin in total, and the direct comparison of the results from all the laboratory for the 18 loci could not be done as only one laboratory submitted typing results. Among 21 loci for which several laboratories submitted typing results, results for 14 loci were the same and results for the other 7 loci were different depending on the participating laboratory. D1S80, F13A01, D16S539, D21S11, D18S51, D3S1744 were the loci with different typing results. Even in the cases where commercial kits were used, the results were not the same depending on the machines used, that is the capillary electrophoresis or the gel based electrophoresis. The reason for the different results, points about the standardization of the methods arid the profiling data were described.

백두구, 소두구 및 砂仁의 形態 鑑別에 관한 硏究

金鍾元,任德彬,李暎鍾 대한본초학회 2005 大韓本草學會誌 Vol.20 No.1

Objectives : In order to distinguish Amomi Cardamomi Fructus, Cardamomi Fructus, and Amomi Fructus, their external, internal, and flour states were observed via microscopic examination. Method : The slice of the tested material made by paraffin section technique was colored with Safranine Malachite Green contrast methods, and the flour of it was mounted by the liquid made by the same ratio of each of glycerin, acetic acid, and water, and then observed and photographed by olymphus-BHT. Result : 1. The seed of Amomum cardomomwn Linne is close to a ball-shape, the color of its pericarp is milk-white or light brown with a diameter of 0.8~1.2cm. The seed of Elettaria cardamomum Maton is oval, and the color of its pericarp is light yellow or yellow-green with a length of 1~2cm and diameter of 5~7cm. The seed of Amomum xanthoides Wallich is close to a ball-shape, and the color of its pericarp is yellow-brown or brown, with thin and compact protrusion, and with a length of 1.5~2cm and diameter of 1~1.5cm. 2. As for the internal form, the mesocarp of Amomi Cardamomi Fructus and '1,Cardamomi Fructus shows once-rounded vascular bundles, and that of Amomi Fructus shows once- or twice-rounded vascular bundles. Amomi Cardamomi Fructus has annulus of stone cells layered among vascular bundles, but Cardamomi Fructus and Amomi Fructus do not have them. Endopleura has stone cells, and the stone cells of Cardamomi Fructus are 16~20㎛ long and 10~20㎛ wide, while Cardamomi Fructus itself is 50~60㎛ long and 40㎛ wide, and the stone cells of Amomi Fructus is 12~16㎛ long and 12㎛ wide. 3. In flour states, the cell sizes of endopleura are as follows: Amomi Cardamomi Fructus and Amomi Fructus are small by 9~25㎛, while Cardamomi Fructus is relatively large with a length of 50~60㎛ and width of 40㎛. Conclusion : Significant differences were found among Amomi Cardamomi Fructus, Cardamomi Fructus, and Amomi Fructus in their external forms. In addition, there were also some differences in their internal and flour states. Therefore, they can be distinguished through observation via microscopic examination.

한국인에서 DXS7132 유전좌와 GATA31D10 유전좌의 다형성에 관한 연구

안종성,장영길,이숭덕,신창호,이윤성,이정빈 大韓法醫學會 2000 대한법의학회지 Vol.24 No.1

The validation study for two STR loci on X-chromosome, DXS7132 and GATA31D10, was done including allelic distribution and frequency of each allele to use these results for individual identification and paternity testing. For 496 unrelated Koreans, above two STR loci were amplified simultaneously using duplex PCR amplification method. The amplified products were analyzed by polyarylamide gel electrophoresis followed by silver staining. In male DXS7132 locus revealed 7 different alleles ranging from 276bp to 300bp. The largest allele was consisted of 14 repetition of [TCTA] unit and took 0.3417. The allele 15 followed next as 0.3165 and allele 13 as 0.1726. In female general distribution was same except one allele, allele 18 was found additionally. The heterozygosity was 0.7706 and 23 different genotypes were found. Polymorphism information content(PIC) was 0.727. Two cases of mutation were noted in DXS7132 locus In both male and femal 7 different alleles were noted in GATA31D10 locus and the alleles ranged from 195bp to 231bp. The allele 15(199bp) took the majority of all as 0.825. The other alleles showed rather relatively low frequency. The heterozygosity was 0.2385 and 11 different genotypes were found. PIC was 0.2521, and no mutation was noted in GATA31D10 locus. Considering these two loci together, 22 different halpotype were noted.

건설업 규모별 안전관리 활성화 방안

고성석,이종빈,김종욱 한국안전학회 2004 한국안전학회지 Vol.19 No.1

After the IMF financial crisis, a lot of risks in construction industry have been increased gradually with the expansion of construction industry widely, higher stories of building, and the expansion of the underground space and excavation work. These risks are bringing out constriction accidents such as the death, the injury of worker and so on, not so much as it would be effected the corporation's image. In spite of these situations, many constriction industries still maintain the wrong methods and riot try to decrease construction accidents. Decently, we should focus on the fact that larger construction industries have been endeavoring to decrease the accidents in construction site and the safety management system of the larger constriction also is being good, on the other hand, the condition of the work in the case of smaller construction industries is very poor, construction company have a particular safety management system but it has a difference according to the construction magnitude, construction companies have a particular safety management system but it has a difference depending on the construction magnitude. Thus, we need to study the smaller construction safety management to decrease the construction accident according to the construction magnitude. Therefore, this study will suggest the developed way of construction safety management by the comparison and analysis from the difference between the higher and the smaller construction industries.

Trans-sphenoidal approach에 의한 pituitary microadenoma 수술 후의 임신 1례

여준규,이두룡,이미정,최종무,이원주,류효충,임만빈,최은주 啓明大學校 醫科大學 1993 계명의대학술지 Vol.12 No.3

We treated a patient with pituitary microadenoma having hyperprolactinemia and irregular menstruation infertility by transsphenoidal microsurgery. Her menstrual cycle become irregular after marriage but previous menstrual cycle was regular. When she visited our hospital due to infertility, initial serum prolactine level was slightly elevated 35.68ng/ml, During bromecriptine therapy, abrupt increase of serum prolactine level up to 126.52 ng/ml and headache and facial flush and galactorrhea developed. Pituitary microadenoma was confirmed by CT and MRI. The patient underwent transsphenoidal microsurgery. Patient was pregnant after surgery, and it was confirmed by USG and she is following up, OPD now.