http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김종해,이동헌,이철우,김중기,김동희,조규판 嶺南大學校 工業技術硏究所 1998 工業技術硏究所論文集 Vol.26 No.2
This paper proposes a double resonant high frequency inverter which reduces the distribution of the switching current. The analysis of the proposed circuit is generally described by using the normalized parameters. Also, the principle of the basic operation and the characteristics of driving were estimated by the switching frequency and the load parameters. And the data for the design were got by the characteristic values obtained from the characteristic estimation. At the same time the example of the design method was proposed. In addition, Comparing the theoretical waveforms to the experimental waveforms certified the operating characteristics of the proposed Inverter. It is certain that the proposed circuit will be used and expanded in the high frequency power supplies like induction heating systems.
알루미늄 합금과 고장력 강판 접합을 위한 헬리컬 SPR의 단조공정 설계
김원영, 김동범, 김기호, 김도훈, 이인환, 조해용 충북대학교 산업과학기술연구소 2013 산업과학기술연구 논문집 Vol.27 No.2
A self-piercing rivet(SPR) is a mechanical component for joining dissimilar materials. It is used for joining dissimilar material sheets such as aluminum alloy and steel. The self-piercing rivet directly pierces into sheets without drilling sheets beforehand unlike conventional rivets. However, the self-piercing rivet occurs buckling when piercing high strength steel. Therefore, a helical SPR which can pierce high strength steel sheet was designed. In this study, forging process was designed for manufacturing the helical SPR and simulated by using commercial FEM code DEFORM-3D. In the simulation of forging process for manufacturing rivet, process sequence, formability, forging load were investigated. The suitable forging process could be designed by comparisons of simulated results. Experimental trials have been carried out for same conditions as simulated ones. The simulated results agreed with the experimental ones. So, the analytic approach in this thesis is useful to save cost and time in the forging industry
임종한,장성실,김성아,문재동,채창호,홍윤철,김수영,김진석,김영욱,한상환,이혜숙,원종욱,송동빈,하은희,강성규 대한산업의학회 2001 대한직업환경의학회지 Vol.13 No.2
기존의 특수건강진단과 작업환경측정을 통한 직업병 관리가 진폐증, 소음성난청 등의 소수 특정질환에 국한되고 실제 직업병 발생 규모 파악이나 신종 직업병의 발견에 한계를 보인다는 사실은 산업의학전문가들 사이에서도 공감을 이루고 있다. 미국과 영국 등에서의 직업성질환 감시체계에 대한 경험은 우리 나라의 직업성질환 감시체계 구축에도 새로운 자극제가 되면서, 1998년이후 인천, 대전, 여천, 구미, 부울경 지역에서 지역 직업성질환감시체계를 산업보건관리의 중요한 시스템으로 구축하려는 노력이 확산되고 있다. 새로이 구축되어지는 이들 지역 직업성질환 감시체계는 감시하고자 하는 대상질환, 활용 가능한 인적자원 및 자료원, 지역 의료체계의 특수성 등에 따라서 목적과 방법을 달리하면서 독특한 형태로 발전을 하고 있다. 각 지역단위 감시체계들이 그 상황에 맞게 독특한 목적과 전략들을 발전 시키면서도, 향후 발전할 국가적인 차원의 직업성질환 감시체계 구축을 위하여 직업성질환 감시의 기본 전략 등을 공유하는 등의 노력이 필요하다. 환례 정의 및 기본적인 등록 서식의 공유, 직업성질환 감시 자료원의 발굴, 공동의 정보 네트워크 및 직업성질환 감시 데이터베이스 구축 등 직업성질환 감시활동을 지원하기 위한 여러 기초 인프라 구축에 힘을 모아야 할 것이다. 우리 나라에서 직업성질환 감시체계를 성공적으로 구축하기 위해서는 수집된 자료의 질 관리를 위한 직업성질환 감시의 원칙 제정과 감시 전략의 공유 등이 필요하며, 전국적인 직업성질환 감시체계의 하부구조라고 할 수 있는 지역감시체계의 기초 토대 마련과 강화작업이 절실하게 필요하다.
Lee, Dahae,Lee, Dong-Soo,Jung, Kiwon,Hwang, Gwi Seo,Lee, Hye Lim,Yamabe, Noriko,Lee, Hae-Jeong,Eom, Dae-Woon,Kim, Ki Hyun,Kang, Ki Sung The Korean Society of Ginseng 2018 Journal of Ginseng Research Vol.42 No.1
Background: The aim of the present study was to evaluate the potential protective effects of six ginsenosides (Rb1, Rb2, Rc, Rd, Rg1, and Rg3) isolated from Panax ginseng against tacrolimus (FK506)-induced apoptosis in renal proximal tubular LLC-PK1 cells. Methods: LLC-PK1 cells were treated with FK506 and ginsenosides, and cell viability was measured. Protein expressions of mitogen-activated protein kinases, caspase-3, and kidney injury molecule-1 (KIM-1) were evaluated by Western blotting analyses. The number of apoptotic cells was measured using an image-based cytometric assay. Results: Reduction in cell viability by $60{\mu}M$ FK506 was ameliorated significantly by cotreatment with ginsenosides Rg1 and Rb1. The phosphorylation of p38, extracellular signal-regulated kinases, and KIM-1, and cleavage of caspase-3, increased markedly in LLC-PK1 cells treated with FK506 and significantly decreased after cotreatment with ginsenoside Rb1. The number of apoptotic cells decreased by 6.0% after cotreatment with ginsenoside Rb1 ($10{\mu}M$ and $50{\mu}M$). Conclusion: The antiapoptotic effects of ginsenoside Rb1 on FK506-induced apoptosis were mediated by the inhibition of mitogen-activated protein kinases and caspase activation.
김명희,이영재,강훈이,강동수,김해섭,배태진 여수대학교 1998 論文集 Vol.13 No.2
To improve the utilization of sea tangle, the processing conditions of extracts, such as kind of additives, particle size of a sample, sample to solvent ratio, extracting temperature and time were studied. Among five extracting methods used for sea tangle extraction, the optimal method was water extraction. The most appropriate particle size of sea tangle powder, extracting temperature and mixing ratio of sea tangle to water were 5 mesh, 60℃ and 1 to 13(w/v), respectively. The basis of solids yield in sea tangle extract, optimal extracting time was about 2 hours. The yield of soluble solids under above-mentioned conditions was 5.1%.
ZVS를 이용한 SEPP 고주파 공진 인버터의 특성해석
김동희,노채균,김종해,민병재,배상준 嶺南大學校 工業技術硏究所 1997 工業技術硏究所論文集 Vol.25 No.1
Applied the high frequency switching technology to the ower conversion circuits, the turn on and off loss of switch point out practically large the point at issue, in order to reduce switching loss, the switching method using tank resonant circuit be connected serial and parallel with load have been continuously investigated. This paper was described about principle and form of proposed circuit made use of soft switching technology ZVS(Zero Voltage Switching) and ZCS(Zero Current Switching) to reduce turn on and off loss at switching. Also, the analysis of the proposed circuit is described generally by using normalized parameter and basic operating principle and driving characteristics have been evaluated as to switching frequency and load parameter. Based on the charactristics value, a method of circuit design is proposed. In addition, Pspice's simulation and experimental waveforms are compared with theoretical ones. The experimental results shows that the proposed Inverter can be used practically such as power source system for induction cooker etc.
냉난방도일을 이용한 우리나라 주요도시의 도시승온화현상 특성분석
김해동,박명희,송경숙 한국환경과학회 2004 한국환경과학회지 Vol.13 No.3
Characteristics of urban warming phenomenon were studied using degree days for three big cities(Seoul, Busan, Daegu) adjacent to airport. Time variation of the cooling and heating degree days was analyzed using the daily mean air temperature data measured at the six meteorological observatory for long-term periods(25~43years). The results for the big cities are as followings: 1) It was found that the heating degree days trended to decrease from year to year. 2) The cooling degree days were nearly unchanged during the same analysis periods. 3) The number of days calling for air-heating also tended to decrease as time passes. 4) Those of air-cooling were nearly unchanged during the same time. It suggests that the change of air-heating condition owing to urbanization came in evidence in the winter season, but that of air-cooling condition was slight in the summer season. On the other hand, the long-term trends of degree days were very small in airport areas except for Kimhae airport. Hence, the gaps of degree days between big cities and rural airport areas are increasing.