Modified automotive organic friction materials through infiltration of liquid carbon precursors

Kuo‑Jung Lee,Ting‑Yu Wu,Hsun‑Yu Lin,Huy‑Zu Cheng,Chih‑Feng Wang 한국탄소학회 2019 Carbon Letters Vol.29 No.4

This research combines the liquid carbon precursor infiltration process for carbon/carbon composites with the fabrication procedure for organic, carbon-matrix friction materials in automotive. In the densification process, different liquid carbon precursors and numbers of densification cycle are adopted to investigate the influence on physical and mechanical properties, microstructure and tribological behavior. Experimental results indicate that the infiltration of liquid carbon precursors could improve the physical, mechanical properties and tribological performances of organic friction materials. The open porosity decreases with the number of densification cycle. Both bulk density and hardness increase with the number of densification cycle. The resin-based specimens show higher hardness and lower open porosity than those of the pitch-based specimens after each densification cycle. The tribological measurement of specimens with different carbon precursors shows that the pitch-based specimen shows lower and more stable friction coefficients and exhibits lower weight losses in comparison with other carbon precursors. Morphological observations show that a large area of smooth lubricative film was easily presented on the worn surfaces of the pitch-based specimens, whereas it was seldom observed on the worn surfaces of the preform specimen and resin-based specimens.

Photocatalytic study of Zinc Oxide with bismuth doping prepared by spray pyrolysis

Lin, Tzu-Yang,Hsu, Yu-Ting,Lan, Wen-How,Huang, Chien-Jung,Chen, Lung-Chien,Huang, Yu-Hsuan,Lin, Jia-Ching,Chang, Kuo-Jen,Lin, Wen-Jen,Huang, Kai-Feng Techno-Press 2015 Advances in nano research Vol.3 No.3

The unintentionally doped and bismuth (Bi) doped zinc oxide (ZnO) films were prepared by spray pyrolysis at $450^{\circ}C$ with zinc acetate and bismuth nitrate precursor. The n-type conduction with concentration $6.13{\times}10^{16}cm^{-3}$ can be observed for the unintentionally doped ZnO. With the increasing of bismuth nitrate concentration in precursor, the p-type conduction can be observed. The p-type concentration $4.44{\times}10^{17}cm^{-3}$ can be achieved for the film with the Bi/Zn atomic ratio 5% in the precursor. The photoluminescence spectroscopy with HeCd laser light source was studied for films with different Bi doping. The photocatalytic activity for the unintentionally doped and Bi-doped ZnO films was studied through the photodegradation of Congo red under UV light illumination. The effects of different Bi contents on photocatalytic activity are studied and discussed. Results show that appropriate Bi doping in ZnO can increase photocatalytic activity.

Thermal Stability, Adhesion and Electrical Studies on (Ti,Zr)Nx Thin Films as Low Resistive Diffusion Barriers between Cu and Si

Cheng-Lin Huang,Chih-Huang Lai,Po-Hao Tsai,Yu-Lin Kuo,Jing-Cheng Lin,Chiapyng Lee 대한금속·재료학회 2014 ELECTRONIC MATERIALS LETTERS Vol.10 No.3

In this study, we investigated the thermal stability, wettability, adhesion and reliability of (Ti,Zr)Nx films used as the diffusion barrier between Cu and Si. (Ti,Zr)Nx films were prepared by DC reactive magnetron sputtering from a Ti-5 at. % Zr alloy target in N2/Ar gas mixtures. A minimum film resistivity of 59.3 μΩ cm was obtained at an N2/Ar flow ratio of 2.75, which corresponds to the near stoichiometric composition (N/(Ti,Zr) ratio ~0.95). The sheet resistance of Cu/(Ti,Zr)N0.95/Si was not significantly increased until annealing above 750°C, indicating good thermal stability. On the other hand, the adhesion energy between Cu and the (Ti,Zr)Nx film was reduced as the N/Ti ratio was increased. To obtain reliable performance on stress-induced-voiding (SIV) and electromigration (EM) tests, we proposed to use (Ti,Zr)/(Ti,Zr)Nx/(Ti,Zr) tri-layers. We suggest that the interfacial adhesion between barrier and Cu plays an important role in reliability. The proposed tri-layer structure may be a promising candidate for a barrier, as it exhibits excellent reliability without increasing resistance.

Synthesis of mesoporous SiO2 xerogel/chitosan mixed-matrix membranes for butanol dehydration

Yi-Feng Lin,Chang-Yu Wu,Ting-Yu Liu,Kun-Yi Andrew Lin,Kuo-Lun Tung,Tsair-Wang Chung 한국공업화학회 2018 Journal of Industrial and Engineering Chemistry Vol.57 No.-

Novel mesoporous SiO2 xerogel/chitosan (CS) mixed-matrix membranes (MMMs) were successfully prepared by incorporating sol–gel synthesized SiO2 xerogels into glutaraldehyde (GA) cross-linked CS membranes. The effects of the SiO2 doping amount and the feed temperature on the performance of the separation of butanol and water was also investigated in this study. The 0.25 wt% SiO2 xerogel/CS MMMs possessed the best pervaporation performance and the largest PSI value of 1102 kg/m2h with a permeate flux of 736 g/m2h (Permeability of 3.25 × 10−5 g m m−2 h −1 Pa−1) and a separation factor of 1498 at a feed temperature of 50 °C. This PSI value is not only comparable but also exceeds that of other membranes reported in the literature. The separation factor and the flux of the SiO2 xerogel/CS MMMs in this study clearly exceed the upper limit of the previously reported MMMs. As a result, the as-prepared novel SiO2 xerogel/CS MMMs showed an improved performance during the butanol and water separation process, which raises the possibility of future pervaporation applications using this novel SiO2 xerogel/CS MMMs.

Label-free Detection of Transport Kinetics and Inhibitor Binding of Membrane Transport Proteins with a Two-mode Plasmonic Sensor

Chia-Wei KUO,Tse-Han KUO,Hui-An LEE,Yu-Ting LIN,Cheng-Jung KUO,Kai-Hung HSIAO,Meng-Hua YANG,Kevin TANADY,Shu-Yu CHANG,Tzy-Rong LIN,Ling CHAO 한국생물공학회 2022 한국생물공학회 학술대회 Vol.2022 No.9

Initial Factors Influencing Duration of Hospital Stay in Adult Patients With Peritonsillar Abscess

Yu-Hsi Liu,Hsing-Hao Su,Yi-Wen Tsai,Yu-Yi Hou,Kuo-Ping Chang,Chao-Chuan Chi,Ming-Yee Lin,Pi-Hsiung Wu 대한이비인후과학회 2017 Clinical and Experimental Otorhinolaryngology Vol.10 No.1

Objectives. To review cases of peritonsillar abscess and investigate the initial clinical factors that may influence the duration of hospitalization. To determine the predictive factors of prolonged hospital stay in adult patients with peritonsillar abscess. Methods. Subjects were adults hospitalized with peritonsillar abscess. We retrospectively reviewed 377 medical records from 1990 to 2013 in a tertiary medical center in southern Taiwan. The association between clinical characteristics and the length of hospital stay was analyzed with independent t-test, univariate linear regression and multiple linear regression analysis. Results. The mean duration of hospitalization was 6.2±6.0 days. With univariate linear regression, a prolonged hospital stay was associated with several variables, including female gender, older ages, nonsmoking status, diabetes mellitus, hypertension, band forms in white blood cell (WBC) counts, and lower hemoglobin levels. With multiple linear regression analysis, four independent predictors of hospital stay were noted: years of age (P<0.001), history of diabetes mellitus (P<0.001), ratio of band form WBC (P<0.001), and hemoglobin levels (P<0.001). Conclusion. In adult patients with peritonsillar abscess, older ages, history of diabetes mellitus, band forms in WBC counts and lower hemoglobin levels were independent predictors of longer hospitalization.

Implementation of a bio-inspired two-mode structural health monitoring system

Lin, Tzu-Kang,Yu, Li-Chen,Ku, Chang-Hung,Chang, Kuo-Chun,Kiremidjian, Anne Techno-Press 2011 Smart Structures and Systems, An International Jou Vol.8 No.1

A bio-inspired two-mode structural health monitoring (SHM) system based on the Na$\ddot{i}$ve Bayes (NB) classification method is discussed in this paper. To implement the molecular biology based Deoxyribonucleic acid (DNA) array concept in structural health monitoring, which has been demonstrated to be superior in disease detection, two types of array expression data have been proposed for the development of the SHM algorithm. For the micro-vibration mode, a two-tier auto-regression with exogenous (AR-ARX) process is used to extract the expression array from the recorded structural time history while an ARX process is applied for the analysis of the earthquake mode. The health condition of the structure is then determined using the NB classification method. In addition, the union concept in probability is used to improve the accuracy of the system. To verify the performance and reliability of the SHM algorithm, a downscaled eight-storey steel building located at the shaking table of the National Center for Research on Earthquake Engineering (NCREE) was used as the benchmark structure. The structural response from different damage levels and locations was collected and incorporated in the database to aid the structural health monitoring process. Preliminary verification has demonstrated that the structure health condition can be precisely detected by the proposed algorithm. To implement the developed SHM system in a practical application, a SHM prototype consisting of the input sensing module, the transmission module, and the SHM platform was developed. The vibration data were first measured by the deployed sensor, and subsequently the SHM mode corresponding to the desired excitation is chosen automatically to quickly evaluate the health condition of the structure. Test results from the ambient vibration and shaking table test showed that the condition and location of the benchmark structure damage can be successfully detected by the proposed SHM prototype system, and the information is instantaneously transmitted to a remote server to facilitate real-time monitoring. Implementing the bio-inspired two-mode SHM practically has been successfully demonstrated.

Effects of 5HT1A Activation on Depression Profile Following 5-HT Depletion in Rats Lacking Social Attachment Since Weanling

Kuo-Jung Chang,Yu-Jung Chen,Jing-Yi Chung,Chen-Cheng Lin,Yia-Ping Liu 대한신경정신의학회 2018 PSYCHIATRY INVESTIGATION Vol.15 No.10

Objective: Post weanling isolation-reared (IR) rats are featured with depressive phenotype, yet its mechanism is not clearly defined particularly in terms of the involvement of central 5-HT1A receptors. The present study aims to examine the effects of 5HT1A activation on forced swim test (FST) in IR rats following 5-HT depletion. Methods: Social control (SOC) and IR rats received an intracerebraoventricular (ICV) injection of 5-HT depletion agent, 5,7-DHT. 14days after the surgery, rats were assessed their performance in FST with or without the challenge with a 5-HT1A agonist, 8-OH-DPAT. Rats were then sacrificed for analyzing their 5-HT tissue levels and the expressions of their 5-HA1A receptors in prefrontal cortex (PFC), hippocampus (HPX), and amygdala (AMY). Results: 5,7-DHT decreased the tissue concentration of 5-HT in both IR and SOC rats. IR rats were more immobile and less sensitive to the lesion-induced immobility, however this effect was reversed by acute challenge of 8-OH-DPAT. 5,7-DHT lesion increased the expression of PFC 5-HT1A receptors. Conclusion: The integrity of central 5-HT system is developmentally crucial for the 5-HT1A-relevant depression profile in rats of social isolation.

The Inventory and Statistics of Potential Large-scale Landslide Areas in Southern Taiwan

( Kuo-wei Li ),( Chien-yu Lin ),( Jyh-jong Liao ),( Yi-wen Pan ),( Keng-hao Kang ),( Che-ming Yang ) 대한지질공학회 2019 대한지질공학회 학술발표회논문집 Vol.2019 No.2

This study produced an inventory of the 2,523 potential large-scale landslide areas (PLSLAs) in southern Taiwan. These PLSLAs were delineated using LiDAR DEM of 1m resolution after the 2009 Typhoon Morakot by other institutes. Using the inventory, we conducted a statistical analysis of the important geologic and geomorphologic factors possibly related to a PLSLA. The statistical analyses reveal that, among the 2,523 PLSLAs, (1) 82% of elevation are between 750 and 2,750 m, (2) 79% of the area are between 10 and 40 hectares, (3) 76% of the slope height are between 200 and 600 m, (4) 86% of the slope are between 25 and 40 degrees and (5) 83 percent of stream order are less than 3. Rock formations of these PLSLAs range from Oligocene to Miocene; 67% of the strata are slate, and 12% are interbedded of sandstone and shale. This study selected 24 medium to high risk cases of the 2,523 PLSLAs, and interpreted the micro-geomorphological features from 1m LiDAR DEM. The following three patterns were present: (1) PLSLA with clear features of gravitational slope deformation in slope height more than 500 m condition, (2) PLSLA with the relic of paleo landslides induced by gravitational buckling, toppling, or plane sliding, (3) PLSLA with river bank erosion on slope toe and head-cut erosion induced by gully development. Based on statistics, the stream order of the PLSLAs with gravitational slope deformation usually would exceed 3; 83% of PLSLAs are the areas also with paleo large-scale landslide.

Application of HTB-SiHa Cells Transfected with a Recombinant Plasmid for External Quality Assessment of Chlamydia trachomatis PCR

Kuo Zhang,Hong Huo,Yu Sun,Lunan Wang,Rui Zhang,Guigao Lin,Jiehong Xie,Qingtao Wang,Jinming Li 대한진단검사의학회 2014 Annals of Laboratory Medicine Vol.34 No.5

Background: The participation of laboratories in external quality assessment (EQA) pro- grams is required for the quality assurance of nucleic acid amplification of Chlamydia tra- chomatis . This study aimed to construct a new quality control (QC) material applicated in EQA of C. trachomatis PCR. Methods: A QC material-HTB-SiHa cells transfected with a recombinant plasmid contain- ing the cryptic plasmid sequence-was constructed for C. trachomatis PCR detection, and four different panels, each consisting of 4 positive samples with serial dilution of the con- structed QC material and 1 negative sample, were distributed by the National Center for Clinical Laboratories among four groups of 275, 268, 317, and 304 participants across China from 2011 through 2012. A total of eight commercial kits were used for C. tracho- matis PCR detection in participants. Results: Nine laboratories reported false-positive results (0.9%). As the series dilution in- creased, the correct reporting of the data sets decreased; the lowest correct rate was 96.3% in the weakest positive samples (10 4 copies/mL). Eight laboratories reported false- positive results, and 42 laboratories reported false-negative results in the EQA detection of C. trachomatis . No significant differences were observed in the detection of the con- structed C. trachomatis positive samples (97.9%, 98.5%, 100%, 98.5%; P =0.36) and negative samples (100%, 99.0%, 100%, 99.0%; P =0.764) using four commercial kits commonly used in China. Conclusions: The results of the EQA study indicated that the constructed material pro- vides a noninfectious, stable control material with sufficient volume for PCR detection of C. trachomatis.