Medical students’ self-assessed efficacy and satisfaction with training on endotracheal intubation and central venous catheterization with smart glasses in Taiwan: a non-equivalent control-group pre- and post-test study

Yu-Fan Lin,Chien-Ying Wang,Yen-Hsun Huang,Sheng-Min Lin,Ying-Ying Yang 한국보건의료인국가시험원 2022 보건의료교육평가 Vol.19 No.-

Purpose Endotracheal intubation and central venous catheterization are essential procedures in clinical practice. Simulation-based technology such as smart glasses has been used to facilitate medical students’ training on these procedures. We investigated medical students’ self-assessed efficacy and satisfaction regarding the practice and training of these procedures with smart glasses in Taiwan. Methods This observational study enrolled 145 medical students in the 5th and 6th years participating in clerkships at Taipei Veterans General Hospital between October 2020 and December 2021. Students were divided into the smart glasses or the control group and received training at a workshop. The primary outcomes included students’ pre- and post-intervention scores for self-assessed efficacy and satisfaction with the training tool, instructor’s teaching, and the workshop. Results The pre-intervention scores for self-assessed efficacy of 5th- and 6th-year medical students in endotracheal intubation and central venous catheterization procedures showed no significant difference. The post-intervention score of self-assessed efficacy in the smart glasses group was better than that of the control group. Moreover, 6th-year medical students in the smart glasses group showed higher satisfaction with the training tool, instructor’s teaching, and workshop than those in the control group. Conclusion Smart glasses served as a suitable simulation tool for endotracheal intubation and central venous catheterization procedures training in medical students. Medical students practicing with smart glasses showed improved self-assessed efficacy and higher satisfaction with training, especially for procedural steps in a space-limited field. Simulation training on procedural skills with smart glasses in 5th-year medical students may be adjusted to improve their satisfaction.

Max-throughput interference avoidance mechanism for indoor self-organizing small cell networks

Kuang-Hsun Lin,Cho-Hsin Tsai,Jen-Wei Chang,Yu-Chieh Chen,Hung-Yu Wei,Fu-Ming Yeh 한국통신학회 2017 ICT Express Vol.3 No.3

Since mobile traffic has been growing recently, the deployment of indoor small cells has become an attractive solution to enhance coverage. However, the increasing density of cells makes inter-cell interference more considerable. In this paper, we propose a max-throughput Interference Avoidance (MTIA) centralized algorithm to improve the system’s throughput. Based on signaling and reports, a central controller connected to each base station can properly turn off base stations that may induce a relatively strong interference, and thus increase SINR. We implemented the MTIA algorithm in an LTE TDD network simulation and showed that MTIA effectively reduces inter-cell interference and improves the system’s throughput.

Mitigating SYN flooding Attack and ARP Spoofing in SDN Data Plane

Ting-Yu Lin,Jhen-Ping Wu,Pei-Hsuan Hung,Ching-Hsuan Shao,Yu-Ting Wang,Yun-Zhan Cai,Meng-Hsun Tsai 한국통신학회 2020 한국통신학회 APNOMS Vol.2020 No.09

As the number of network devices increases rapidly, it becomes more and more difficult to defend network attacks. Large-scaled attacks, such as SYN flooding, may lead to heavy burden to the switches as well as the controller in a software defined network (SDN). In this paper, we investigate the SYN flooding and Address Resolution Protocol (ARP) spoofing attacks in SDN, and then propose mechanisms to address these two attacks. We also present a new scheme to detect SYN flooding by using only a few forwarding rules. Moreover, we utilize the Programming Protocol-independent Packet Processors (P4) technique to mitigate the burden of the controller.

Korean-Chinese Person Name Translation for Cross Language Information Retrieval

( Yu Chun Wang ),( Yi Hsun Lee ),( Chu Cheng Lin ) 한국언어정보학회 2007 학술대회 논문집 Vol.2007 No.-

Named entity translation plays an important role in many applications, such as information retrieval and machine translation. In this paper, we focus on translating person names, the most common type of name entity in Korean-Chinese cross language information retrieval (KCIR). Unlike other languages, Chinese uses characters (ideographs), which makes person name translation difficult because one syllable may map to several Chinese characters. We propose an effective hybrid person name translation method to improve the performance of KCIR. First, we use Wikipedia as a translation tool based on the inter-language links between the Korean edition and the Chinese or English editions. Second, we adopt the Naver people search engine to find the query name``s Chinese or English translation. Third, we extract Korean-English transliteration pairs from Google snippets, and then search for the English-Chinese transliteration in the database of Taiwan``s Central News Agency or in Google. The performance of KCIR using our method is over five times better than that of a dictionary-based system. The mean average precision is 0.3490 and the average recall is 0.7534. The method can deal with Chinese, Japanese, Korean, as well as non-CJK person name translation from Korean to Chinese. Hence, it substantially improves the performance of KCIR.

Adjusting optical resonance thickness to increase the conversion efficiency of polymer solar cells

Yu Sheng Tsai,Jian-Shian Lin,Wei-Ping Chu,Po-Hsun Wang,Fuh-Shyang Juang,Ming-Hua Chung,Chin-Ming Chen,Mark O. Liu 한국물리학회 2010 Current Applied Physics Vol.10 No.3

The derivatives of C60, [6,6]-phenyl C61-butyric acid methyl ester (PCBM), and 3-hexylthiophene (P3HT)were dissolved in DCB solvent, then spin coated into an active layer for polymer solar cells. The experimental parameters were studied carefully to obtain the optimum power conversion efficiency (PCE). The primary process for generation of photocurrent in an organic photovoltaic device is the generation of bound electron–hole pairs (excitons) by absorption of energy (photons) from the optical electric field. Modeling was based on the assumption that the photocurrent generation process is the result of the creation and diffusion of photogenerated species (excitons), which are dissociated by charge transfer at the active layer. Improve organic optics absorb by insert organic layer (CuPc or C60) at the active layer/Al interface. This research is divided into two components. First part, we use n-type C60 as transmission layer. When an optimum thickness of C60 is 5 nm, the Jsc of polymer solar cell can be increased from 7.26 mA/㎠ to 7.7 mA/㎠. The Voc decrease is because the energy level of C60 LUMO (lowest unoccupied molecular orbital) at 4.5 eV is higher than the 3.7 eV of PCBM. Second part, we use p-type CuPc as transmission layer. When an optimum thickness of CuPc is 3 nm, the short circuit photo-current density (Jsc) and open circuit voltage (Voc) of polymer solar cell can be increased from 7.26 mA/㎠ to 8.0 mA/㎠ and 0.56–0.58 V, respectively. The reason is the same as C60. The Voc increase is because the energy level of CuPc LUMO (lowest unoccupied molecular orbital) at 3.1 eV is lower than the 3.7 eV of PCBM. The Jsc increase is because the 3 nm of CuPc leads to a constructive interference happened in the active layer and thus optical absorption increases. In this study we used 3 nm of CuPc at the active layer/Al interface to enhance the short circuit current density, and the efficiency was increased to 2.94%.

STIMULATING PROTEIN SPARING IN TILAPIA THROUGH DIGESTIVE/ METABOLIC ENHANCEMENT

Yu-Hung Lin,Allen Ming-Hsun Wu 한국수산과학회 양식분과 2015 한국수산과학회 양식분과 학술대회 Vol.2015 No.5

The Applications of Smart Wearable Devices for Detecting Balance Function in Individuals at High Risk of Falls

Tsung-Hsun Hsieh,Chih-Wei Peng,Kai-Yun Chen,Ying-Zu Huang,Yi-Huang Lin,Wei-Zong Zhong,Chun-Yu Cheng,Ya-Ju Chang,Chih-Hsiu Cheng,Yu-Fen Chuang 한국재활복지공학회 2017 한국재활복지공학회 학술대회논문집 Vol.2017 No.11

Fair Peer Assignment Scheme for Peer-to-Peer File Sharing

( Chih-lin Hu ),( Da-you Chen ),( Yi-hsun Chang ),( Yu-wen Chen ) 한국인터넷정보학회 2010 KSII Transactions on Internet and Information Syst Vol.4 No.5

The reciprocal virtue of peer-to-peer networking has stimulated an explosion of peer population and service capacity, ensuring rapid content distribution in peer-to-peer networks. Critical issues such as peer churn, free riding, and skewed workload significantly affect performance results such as service agility, fairness, and resource utilization. To resolve these problems systematically, this study proposes a peer assignment scheme that supports fair peer-to-peer file sharing applications. The proposed scheme exploits the peer duality of both server-oriented peer capacity and client-oriented peer contribution. Accordingly, the system server can prioritize download requests and appropriately assign server peers to uploading file objects. Several functional extensions, including peer substitution and elimination, bandwidth adjustment, and distributed modification, help cope with subtle situations of service starvation and download blocking, and hence make the system design robust and amenable. Simulation results show this design is examined under both centralized and distributed peer-to-peer environments. Performance results confirm that the proposed mechanisms are simple but effective in maintaining service agility and fairness, without loss of overall service capacity in peer-to-peer files sharing systems.

A collaborative model between dialysis clinics and a hospital center improves the quality of vascular access care and intervention for hemodialysis patients

( Chung-kuan Wu ),( Yu-wei Fang ),( Chia-hsun Lin ) 대한신장학회 2024 Kidney Research and Clinical Practice Vol.43 No.2

Background: This study reports the outcomes of a collaborative program between dialysis clinics and a referral hospital, which consisted of clinical monitoring and supplementary routine surveillance, for improving the quality of vascular access care. Methods: This retrospective observational study was performed at five dialysis clinics as part of a 2-year collaborative program (2019-2020) in conjunction with a hospital-based dialysis access management center. A total of 392 hemodialysis patients (arteriovenous fistula [AVF], n = 339 and arteriovenous graft [AVG], n = 53) were included. Outcome measures included the prognosis of vascular access, clinic satisfaction, and referral rate to the hospital. Results: Increased vascular access flow was observed and critical flow events decreased from the first to the second year (AVF: 18.3% vs. 12.7%, p < 0.001; AVG: 26.2% vs. 20.1%, p = 0.30). There were fewer percutaneous transluminal angioplasty events in the AVG group (0.77 per person-year vs. 0.51 per person-year, p = 0.005). New AVF or AVG creation events also remained low. All dialysis clinics were satisfied with the program. The overall referral rate from the participating clinics increased (65.7% vs. 72.0%) during the study period independently of the physical distance between the dialysis clinic and the hospital. Conclusion: The collaboration between dialysis clinics and a referral hospital for improving the quality of vascular access care was successful in this study, and the model can be used by other clinics and hospitals looking to improve care coordination in dialysis patients.

Modified automotive organic friction materials through infiltration of liquid carbon precursors

Kuo‑Jung Lee,Ting‑Yu Wu,Hsun‑Yu Lin,Huy‑Zu Cheng,Chih‑Feng Wang 한국탄소학회 2019 Carbon Letters Vol.29 No.4

This research combines the liquid carbon precursor infiltration process for carbon/carbon composites with the fabrication procedure for organic, carbon-matrix friction materials in automotive. In the densification process, different liquid carbon precursors and numbers of densification cycle are adopted to investigate the influence on physical and mechanical properties, microstructure and tribological behavior. Experimental results indicate that the infiltration of liquid carbon precursors could improve the physical, mechanical properties and tribological performances of organic friction materials. The open porosity decreases with the number of densification cycle. Both bulk density and hardness increase with the number of densification cycle. The resin-based specimens show higher hardness and lower open porosity than those of the pitch-based specimens after each densification cycle. The tribological measurement of specimens with different carbon precursors shows that the pitch-based specimen shows lower and more stable friction coefficients and exhibits lower weight losses in comparison with other carbon precursors. Morphological observations show that a large area of smooth lubricative film was easily presented on the worn surfaces of the pitch-based specimens, whereas it was seldom observed on the worn surfaces of the preform specimen and resin-based specimens.