http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
FDM에서 Build Orientation이 쾌속조형물의 표면에 미치는 영향
전재억,서진호,권광진,권혁준,정진서,하만경 한국공작기계학회 2002 한국공작기계학회 춘계학술대회논문집 Vol.2002 No.-
Fused deposition (FD) modeling by Stratasys Inc., is one of the material deposition subfamilies of solid freeform fabrication (SFF) technologies. In this process, build material in the form of a flexible filament, is heated to a semi-liquid state and extruded from a controlled deposition head onto a fixtureless table in a temperature controlled environment. The position of nozzle is computer controlled relative to the base, which allows geometric complex models to be made to precise dimensions. FDM provide what the part was directly tested by the worker. It provide believable data. This Study is identify to surface roughness by build orientation adjustment. So, the paper is the study on surface roughness by build orientation at FDM.
The effect of neuropeptides on secretion of Interleukin-8(IL-8)
Kim, Kyung-Jun,Park, Sang-Hyuk,Choi, Kyoung-Kyu,Park, Sang-Jin 大韓齒科保存學會 2006 Restorative Dentistry & Endodontics Vol.31 No.3
본 연구는 치수조직, 치은, 치주인대로부터 배양된 조직을 SP (Substance P)로 4시간, SP, CGRP (Calcitonin Gene-related Peptide), Tumor necrosis factor-α (TNF-α)로 8시간 자극 후 RNase Protection Assay를 시행하고, IL-8의 분비량을 측정해 다음 결과를 얻었다. 1. IL-8 mRNA는 모든세포에서 발현됐다. 2. IL-8 mRNA 발현은 SP (10^(-5)M)와 SP (10^(-8)M)로 4시간 자극 시 증가되지 않았다. 3. IL-8 mRNA 발현은 SP (10^(-4)M)와 CGRP (10^(-6)M)로 8시간 자극 시 증가되지 않았다. 4. TNF-α (2 ng/㎖) 자극 시, IL-8 mRNA 발현이 증가됐다. 5. 치은 세포를 CGRP (10^(-6)M)로 8시간 자극 시, IL-8 분비량이 증가했다 (p < 0.05). 6. 치주인대 세포를 SP (10^(-4)M)로 8시간 자극 시 IL-8 분비량이 증가했다 (p < 0.05). We investigated the secretion of Interleukin-8 (IL-8) from ginviva and periodontal ligament stimulated with Substance P (SP) and Calcitonin Gene-related Peptide (CGRP). Gingiva (GF), periodontal ligament (PDLF) and pulp (PF) tissues were collected from extracted instact 3rd molars. Cultured cells were stimulated with different concentrations of SP for 4 hrs, and stimulated with SP, CGRP and Tumor Necrosis Factor-α (TNF-α) for 8 hrs. Then RNase Protection Assay was carried out. ELISA was performed using supernatants of stimulated cells for quantitative analysis of IL-8. Results were assessed using supernatants of stimulated cells for quantitative analysis of IL-8. Results were assessed using student t-test with significance of P < 0.05. According to this study, the results were as follows: 1. IL-8 mRNA was detected in all type of cells studied (PF, GF and PDLF). 2. IL-8 mRNA expression was not increased after stimulating 4 hrs with SP (10^(-5)M) and SP (10^(-8)M) compared with Mock stimulation in all type of cells studied. 3. IL-8 mRNA expression was not increased after stimulating 8 hrs with SP (10^(-4)M) and CGRP (10^(-6)M) compared with Mock stimulation in all type of cells studied. 4. TNF-α (2 ng/㎖) increased the expression of IL-8 mRNA in all kind of cells studied. 5. The secretion of IL-8 from GF was increased 8 hrs after the stimulation with CGRP (10^(-6)M) (p < 0.05). 6. The secretion of IL-8 from PDLF was increased 8 hrs after the stimulation with SP (10^(-4)M) (p < 0.05). Calcitonin Gene-related Peptide (CGRP) increased Interleukin-8 (IL-8) which plays an important role in chemotaxis of neutrophil in Calcitonin Gene-related Peptide (CGRP) gingival tissue, whereas Substance P increased the secretion of IL-8 from periodontal ligament.
비철금속의 선삭에서 측면경사각과 이송량이 표면 거칠기에 미치는 영향
전재억,정진서,하만경 한국공작기계학회 2001 한국생산제조학회지 Vol.10 No.4
In the present industry. there are necessary to cut not only iron metals but also non-ferrous metals such as aluminum, brass, plastic and wood(Paulownia). therefore it had been made the studies of non-ferrous metals by many scientists. we hope this kind of study will continue. The purpose of this study is to conduct the basic experiment about influencing of the feedrate adjustment and the change of the side rake angle at turning of non-ferrous metals. As the results, the surface roughnesses were on the decrease with a side-rake angle and feedrate diminution in the case of the plastic, brass, aluminum, and paulownia.
김준영,김진우,조경모,박세희 大韓齒科保存學會 2012 Restorative Dentistry & Endodontics Vol.37 No.2
Objectives: This study aimed to evaluate the relationship between the cyclic fatigue of a K3 file and internal stress intentionally induced until the activation of the auto-stop function of the torque-controlled motor. Materials and Methods: K3 (Sybron Endo) .04 and .06 taper, size 25, 30, 35, 40 and 45 were used in this study. To give the internal stress, the K3 files were put into the .02 taper Endo-Training-Bloc (Dentsply Maillefer until the activation of the auto-stop function of the torque-controlled motor. The rotation speed was 300 rpm and torque value was 1.0 N·cm. K3 were grouped by the number of induced internal stress and randomly distributed to 4 experimental groups (n = 10, Stress 0 [control], Stress 1, Stress 2 and Stress 3). For measuring the cyclic fatigue failure, the K3 files were worked against a sloped glass block and time for file separation was recorded. Data was statistically analyzed Statistical analyses were performed using two-way ANOVA and Duncan post-hoc test at p < 0.05 level. Results: Except .04 taper size 30 in Stress 1 group, there were statistically significant differences in time for file separation between control and all experimental groups. K3 with .04 taper showed higher cyclic fatigue resistance than those of .06 taper. Conclusion: In the limitation of this study, the cyclic fatigue of the K3 file was influenced by the accumulated internal stress from use until the auto-stop function was activated by the torque-controlled motor. Therefore, clinicians should avoid the reuse of the K3 file that has undergone auto-stops. (Restor Dent Endod 2012;37(2):74-78)
CT사진을 이용한 한국인의 C형 치근관의 분포에 대한 연구
전록원,허경회,이원진,허민석,이삼선,최순철 대한구강악안면방사선학회 2009 Imaging Science in Dentistry Vol.39 No.2
Purpose : To investigate the incidence and prevalence of C-shaped root canal using computed tomographic images of head and neck in Korean population. Materials and Methods : Regardless of each examination purpose, randomly selected 268 examples which have serial axial computed tomographic images with 8 normal molars in maxilla and mandible were selected and investigated. Defined C-shaped root canal and we could get 82 proper image examples in view of this definition. These were detected and investigated of incidence and prevalence of C-shaped root canal. Results : C-shaped root canals were found in 82 examples among 268 (30.6%) and 147 teeth. They were only found on molar area, and the highest incidence was 37.41% of left mandibular second molars, and the lowest was 2.04%of right maxillary second molars. On prevalence of tooth position, mandibular second molar was the highest, 65% of C-shaped root canal teeth and maxillary second molar was 6% the lowest. Conclusion : 31% of randomly selected CT images no considering check-up reason have C-shaped root canals. The C-shaped root canals of mandibular second molar are found most frequently and they are also detectable on maxilla. On Korean population, C-shaped root canals are one of conditions that have to concern with dental treatment for it appears at a high prevalence relatively.
Jun, Seung‐,Hyun,Kim, Kwanghee,An, Hyo Jin,Kim, Byoung Chan,Sonn, Chung Hee,Kim, Miju,Doh, Junsang,Yee, Cassian,Lee, Kyung‐,Mi,Kim, Jungbae WILEY‐VCH Verlag 2012 Advanced functional materials Vol.22 No.21
<P>Electrospun and alcohol‐dispersed polystyrene‐poly(styreneco‐maleic anhydride) (PS‐PSMA) nanofibers, which allow for facile conjugation of antibodies, are used as an innovative cell isolation/enrichment and support/release platform. As reported by Kyung‐Mi Lee, Jungbae Kim, and co‐workers on page 4448, this work opens up the potential for an innovative immune cell therapy in which specific immune cells are isolated by antibody‐conjugated nanofibers and are directly delivered to the target sites under the controlled and sustained release of immune cells via in vivo activation. </P>
형대진,김승구,조현준,박경환 동아대학교 정보기술연구소 2006 情報技術硏究所論文誌 Vol.14 No.1
In this paper, we introduce the method for developing the mobile 3D game engine based on the WIPI platform which has been proposed as the mobile standard platform. Our game engine is designed so that it supports OpenGL-ES and JSR-184 that are mobile 3D graphic APIs. Our game engine has a mobile emulator operated on PC and SDK to support mobile programming in PC environments. Mobile 3D game developers can use the APIs at various levels. Also, the game engine is developed in modular in order to support various game genres.