http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
최보가,최무혁,박규정 경북대학교 1992 논문집 Vol.24 No.-
The purpose of this study is to make use of these materials for the next housing plan and to put emphasis on post occupancy evaluation. For this study, the apartments occupied are chosen and the degree of satisfaction with residence is examined, in real occupants' respect. As the objects, the apartments built by the Korean National Housing Corporation in 3 apartment sites of Taegu in 1979, 1983, 1985 is selected. The apartment size is restricted to 17 pyung. SPSS(Statistical Package for Social Sciences) is used as an analysis method and the degree of satisfaction is divided into 5 grade using Likert measurement to give objectivity. After the analysis, the degree of satisfaction with each apartment is compared and analyzed through Duncan's Multiple Test. The results are as follows. 1. In the satisfaction with each room, the degree of bathroom, kichen and dining room, balcony, entrance showed meaning difference. 2. Many factors out of evaluation factors showed meaning difference partly of room 1, room 2, room 3, kichen and dining room, bathroom utility room and boiler room, balcony in the degree of satisfaction with each apartment. 3. The improved factors, the factors which need to improve, the factors to which the occupants adapted themselves among evaluation factors are classified on the basis of standard satisfaction.
렙토스피라증의 진단에 있어 수동혈구응집반응법과 육안응집반응법의 정확도에 관한 연구
최보율,김영규,이수진,송재철,박항배 한양대학교 의과대학 1994 한양의대 학술지 Vol.14 No.2
Before 1984, Leptospirosis had been reported sporadically in middle inland of Korea as hemorrhagic pneumonia like disease, epidemic pulmonary hemorrhagic fever or epidemic pneumonitis since 1975. The epidemiologic characteristics of this disease were found out and the agent was isolated microbiologically after a large epidemic in 1984. Thereafter many consecutive studies for leptospirosis had been performed in the realm of epidemiology, microbiology and clinical field. But in order to appropriate control of Leptospirosis there are many problems such as organizing surveillance system for early diagnosis and treatment, identifying sero-group and serovar in each epidemic area and assessing vaccine efficacy. The objectives of this study was to find out easily applicable diagnostic methods to be used in a rural community surveillance system. Two diagnostic methods, passive hemagglutination(PHA) test and macroscopic agglutination test(maAT) were measured against their accuracies, sensitivity, specificity and predictive value of positive and negative. 301 sample sera from 270 human cases was collected through Leptospirossis surveillance system in a rural community during 1989-1992. Microscopic agglutination test(MAT) were used for confirmed diagnosis according to WHO guideline with 4 strains; Icterohemorrhagiae lai and Canicola canicola Hond Utrecht IV as standard strians and 6P-014-1 and YP-35-1 as strains isolated in Korea in 1986. The results are as follows. 1. 75(24.9%) among 301 sample sera and 49(18.1%) among 270 persons was serologically positive with MAT. 2. Agreement between PHA and MaAT was very low(k-coefficient≤0.252). 3. In PHA, specificity was very high(≥0.96) but sensitivity was very low(≤0.28). 4. In MaAT, specificity(≥0.73) was relatively lower than PHA but sensitivity (≥0.79) was significantly higher than PHA, especially false-positive rate case was absent in MAT's high antibody titer(above 1:640). It was concluded that MaAT method was a very useful diagnostic tool for early diagnosis of Leptospirosis in a rural community surveillance system, provided that confirmed diagnosis with MAT method be carried out in laboratory of medical school or research institute such as National Institute of Health or Provicial government Institute of Health and Environment.
김보혜,최경규,박상혁,최기운 大韓齒科保存學會 2010 Restorative Dentistry & Endodontics Vol.35 No.2
The purpose of this study was to compare the root canal shaping ability of 4 rotary NiTi instruments in simulated root canals. For the preparation of thirty two curved root canals, Mtwo instruments using “single length”technique, and Profile, ProTaper Universal, and K3 using crown-down technique (N = 8) were used. All canal samples were prepared by reaching an apical canal size of #30. Pre- and post-instrumentation digital images were recorded and an assessment of canal shape was determined using a computer image analysis program SigmaScan Pro (Systat Software Inc., San Jose, CA, USA). The changes of the dimension of inner walls of canals, (2) the changes of the dimension of outer walls of canals, and (3) the centering ratio were measured at 7 measuring points, and then data were statistically analyzed using one-way ANOVA and Duncan’s test. The results were as below; 1. The root canal shaping ability of Profile was significantly faster than that of other rotary NiTi instruments (p < 0.05). 2. The deformation and fracture of all instruments used for this study were not experienced. 3. In the degree of changes of the dimension of inner walls of canals, Profile demonstrated the lowest changes of the dimension of inner walls of canals except at the measuring points of the 1 and 2 mm (p < 0.05). However, the ProTaper Universal showed the highest changes of the dimension of inner walls of canals at all measuring points (p < 0.05). 4. In the degree of changes of the dimension of outer walls of canals, Mtwo demonstrated the lowest changse of the dimension of outer walls of canals except at the measuring point of the 1 mm (p < 0.05). However, Profile exhibited the highest changes of the dimension of outer walls of canals at the measuring points of 3 and 4 mm and ProTaper Universal and K3 showed the largest changes of the dimension of outer walls of canals at the measuring points of 1, 2, 6, and 7 mm (p < 0.05). 5. In degree of centering ratio, Profile demonstrated the least centering ratio comparing with the centering ratio shown by other NiTi instruments at the measuring points of 1, 4, 5, and 6 mm. Results suggest that in the coronal part of canal preparation, active cutting files such as ProTaper Universal may efficiently flare the canal orifice and form a better taper, and in the apical part of the canal, files which have a better centering ability such as Profile may maintain the original canal curvature and reduce the shaping time. 이 연구의 목적은 4가지 엔진구동형 NiTi 기구의 근관성형력을 비교하는 것이다. 32개의 투명레진모형을 사용하여 파일의 단면도가 S자 형태이고“single length”방법으로 근관성형을 시행하는 Mtwo와 crown-down 방법으로 근관성형을 하는 Profile, ProTaper Universal 및 K3로 근관성형을 하였다 (n = 8). 모든 근관은 한사람의 술자가 근단공 크기가 #30이 될때까지 성형하였다. 기구 사용 전과 후 근관 모양을 디지털 영상을 기록하였고, 컴퓨터 영상 분석 프로그램(Expression Scanner와 Adobe Photoshop CS)으로 평가하였다. 다음과 같은 결론을 얻었다. 근첨으로부터 1, 2, 3, 4, 5, 6, 7 mm 떨어진 부위의 내측과 외측으로 삭제된 레진 양을 측정하였고, 자료는 SPSS법으로 비교 분석하였다. 1. 근관형성 시간은 Mtwo가 84.50초로 가장 짧았으며, 총 작업시간은 K3가 269.37초로 가장 길었다(p < 0.05). 2. 기구의 변형과 파절은 모든 구동형 NiTi 파일에서 발생하지 않았다. 3. 근관 내측 폭경의 변화는 Profile이 1, 2 mm 부위를 제외한 다른 부위에서 가장 적었으며, ProTaper Universal은 모든 부위에서 가장 많았다(p < 0.05). 4. 근관 외측 폭경의 변화는 Mtwo이 1 mm 부위를 제외한 모든 부위에서 가장 적었으며, Profile은 3, 4 mm 부위에서 가장 많았다(p < 0.05). ProTaper Universal와 K3는 1, 2, 6, 7 mm 부위에서 가장 많았다(p < 0.05). 5. 근관중심변위율(centering ratio)은 Profile이 1, 4, 5, 6 mm 부위에서 가장 적었다(p < 0.05). 이상의 결과, 구동성 NiTi 파일을 이용한 만곡 근관의 근관형성은 치경부는 ProTaper와 같은 삭제력이 높은 파일을 사용하는 것이 근관 입구를 효과적으로 넓히고 더 나은 taper를 형성하며, 근단부는 Profile과 같은 근관 중심 변위가 적은 파일을 사용하는 것이 근관형성 시간을 단축하고 근단부의 근관 변형(transportation)을 줄일 수 있다고 판단된다.