가축분뇨를 이용한 SCP 생산 균주의 분리 및 균체 단백질 생산

한석균,고유석,안태영,배동훈 한국미생물생명공학회 ( 구 한국산업미생물학회 ) 1996 한국미생물·생명공학회지 Vol.24 No.6

질소원으로서 계분을 이용하는 균주를 선별하고 계분배지에서 균체의 생육속도가 다른 균주에 비하여 우수한 균주를 분리하였다. 형태·생리학적 특성을 기초로 하여 yeast의 분류 기준과 비교하여 본 균주를 Candida sp.로 동정하였으며 본 균주를 Candida sp. D116으로 명명하였다. Poultry feces extract medium에서 4% 농도의 glucose 첨가가 균체 생육에 효과적이었다. D116 균주를 액체 발효하여 균체생산능, 요산 그리고 가용성 단백질의 변화를 조사하였다. 그 결과 약 60시간이 경과하면 액체 발효 배지내의 거의 모든 가용성 단백질 및 요산의 감소를 보였으며 균체생육은 약 36시간 배양하였을 때 최고조에 도달하였고 그 후에는 점차 감소하는 경향을 보였다. SCP의 대량생산의 결과 50%의 계분혼합 배지와 30℃의 배양 온도에서 36시간 배양하여 균주의 생육수준이 3.8×10^9 CFU/ml 농도의 균체를 생산하였고 200 L의 배양액중 약 870 g-dw의 균체를 얻었으며 생산된 군체의 조단백질 함량은 67%이었다. Production of Single Cell Protein from Poultry Feces. Suk-kyun Han, You-Suk Go, Tae-Young Ahn and Dong-Hoon Bal^1*. Deparment of Microbioligy, College of Natural Sciences, Dankook Univerity, Cheonan 330-714 and Research Center for Molecular Microbiology, Seoul Nationa University, Seoul 151-742, Korea, ^1Department of Food Engineering. College of Engineering, Dankook University, Cheonan 330-714 and Bioproducts Research Center of Yonsei University, Seoul 120-749, Korea - From the soil collected form provincial area of South Korea, a microorganisms which have been shown good growth in the minimal poultry feces extract medium was isolated. Supplement of glucose to the poultry feces extract medium helped the complete degraded during the microbial growth. Maximum cell growth (3.8×10^9 CFU/ml) obtained at 36 hours of incubation after inoculation. Uric acid was degraded faster in minimal medium that in the glucose complement medium. VFA (volatile fatty acid), which are known as major compounds of poultry feces odor, were almost removed from the minimal poultry feces extract medium. Glucose supplement to the minimal medium enhanced the growth of microbial cells. Addition of 4% of glucose and 4% of neopeptone to the minimal poultry feces extract medium helped the maximal growth of cells.

고출력 CW Nd:YAG 레이저를 이용한 CSP 1N 박판재 절단시 공정변수의 절단표면특성에 미치는 영향

안동규,김민수,이상훈,유영태,박형준 한국공작기계학회 2004 한국공작기계학회 추계학술대회논문집 Vol.2004 No.-

The objective of this research work is to investigate the influence of process parameters, such as power of laser, travel speed of laser and material thickness, on roughness and striation of the cut surface for the case of cutting of CSP IN sheet using high power Nd:YAG laser with continuous wave (CW). In order to find the practical cutting region and the relationship between process parameters on the roughness and the striation, several laser cutting experiments are carried out. From the results of experiments, the allowable cutting region and an optimal cutting speed for each cutting condition have been obtained to improve the quality of the cut surface. In addition, it has been shown that the surface roughness is related to the number of striation and depth of valley of the cut surface.

내부에 피라미드 구조를 가지는 ISB 판넬의 정적 특성 분석

안동규,이상훈,김민수,한길영,김진석,정창균,양동열 한국공작기계학회 2005 한국공작기계학회 춘계학술대회논문집 Vol.2005 No.-

The objective of this research work is to investigate into static characteristics of ISB panels with the pyramidal structure as a internally structured material. In order to investigate the behavior of material deformation and frracture characteristics, several tensile tests have been carried out for the ISB panel and skin sheet. Through the results of the experiments, the mechanical properties of ISB panel and skin sheet and fracture characteristics have been obtained. In addition, the mechaical properties of the ISB panel have been compared with that of the skin sheet by the view point of a specific modulus, a specific yield strength and a specific strength. From the results of the comparision, it has been shown that the ISB panel has an excellent static characteristics.

자일리톨과 불화나트륨을 함유한 저작성 정제가 교정환자의 구강위생에 미치는 영향에 관한 임상시험

유상훈,안석준,이신재,백승학,김태우,장영일,남동석 대한치과교정학회 2003 대한치과교정학회지 Vol.33 No.2

본 연구는 불화나트륨과 자일리톨 성분으로 구성된 구강 청정용 저작성 정제(덴포정, 하미즐, 부천, 경기)가 교정치료 중인 환자의 구강위생 상태에 미치는 영향을 알아보기 위해 시행되었다. 교정치료 중인 18세 이상의 성인 환자 30명을 대상으로 약제 상요 전, 2주 후, 4주 후에 피험자의 상악과 하악 전치 부위 및 구치 부위에서 각각 치은 지수, 치은 출혈 지수, 치태 지수를 측정하여 다음과 같은 결과를 얻었다. 1. 상하악 전치부와 구치부 모두에서 치태 지수가 약제 사용 전에 비해 사용 2주 후와 4주 후 유의성 있게 감소하였다(p<0.05). 또한, 적용 2주 후와 4주 후의 지수를 비교하였을 때 4주 후에 좀 더 개선된 경향을 보였으나, 통계적 유의성은 나타나지 않았다(p<0.05). 2. 치은 지수, 치은 출혈 지수도 상하악 전치부와 구치부 모두에서 적용 전에 비하여 2주 후와 4주 후 유의성 있게 감소하였다(p<0.05). 적용 2주 후와 4주 후의 지수의 비교 검증에서 통계학적으로 유의할 만한 차이가 보이지 않아 구강위생 상태의 개선이 계속 유지됨을 보였다. 본 연구의 결과는 치태 지수, 치은 지수, 치은 출혈 지수가 실험 정제 적용 후에 감소하여 구강위생 상태가 개선되었음을 보였다. 이러한 결과를 통해 덴포정을 교정치료 중인 환자에서 부가적으로 사용하였을 경우 치주조직의 건강을 증진시키는데 도움을 줄 수 있으리라고 생각된다. The aim of this study was to evaluate the effect a chewable tablet containing sodium fluoride and xylitol (DenPo, Hamizzle, Bucheon, Kyungki) on the oral hygiene state in the orthodontic patients. The subjects consisted of 30 adult orthodontic patients, who have worn the fixed orthodontic appliance at least 6 months. They were instructed to use the tablet forth a day. Gingival index (GI), plaque index (PI), and sulcus bleeding index (SBI) of upper and lower anterior and posterior regions were measured before using the tablet (TO), 2 weeks after using the tablet (T1), and 4 weeks after using the tablet (T2). The data were analyzed with Wilcoxon signed ranks tests. The results were as follows ; 1. PI was decreased significantly in the T1 and T2 stage compared with TO stage in the both anterior and posterior regions (p<0.05). Although PI was decreased in the T2 stage compared with T1, there was not statistical significance(p>0.05). 2. GI and SBI showed similar results compared with PL. In the T1 and T2 stage, there was statistically significant decrease in the GI and SBI (p<0.05). This study showed that the DenPo tablet could be used as an adjunct to improve oral hygiene in the orthodontic patients. The decrease of the indices may suggest that DenPo tablet could be effective in the plaque removal and prevention of gingival inflammation in the orthodontic patients.

정적 내연적 방법을 이용한 CM-D-PLR판넬 해석에 관한 연구

정동원,안현길,고형훈 제주대학교 해양과환경연구소 2005 해양과환경연구소 연구논문집 Vol.29 No.1

정적-내연적 이론을 이용한 Cowl Top Otr 판넬 해석에 관한 연구

정동원,안현길,고형훈,문원섭 제주대학교 공과대학 첨단기술연구소 2005 尖端技術硏究所論文集 Vol.16 No.1

The static implicit finite element method has been effectively applied to analyze total cowl top otr panel stamping processes, which include the forming stage. Complicated and abnormal large size cowl top otr panel was analyzed by using commercial program called AutoForm. Analysis results examining possibility and validity of the AutoForm software and the factor study are presented. Furthermore, the simulated results for the total cowl top otr panel stamping processes are shown and discussed. Its application is being increased especially in the automotive industry for the cost reduction, weight saving, and improvement of strength.

지역사회획득 폐렴의 치료지침 권고안

송재훈,정기석,강문원,김도진,배현주,서지영,심태선,안중현,안철민,우준희,이남용,이동건,이미숙,이상무,이영선,이혁민,정두련,지역사회획득 폐렴 치료지침 제정위원회 대한감염학회 2009 감염과 화학요법 Vol.41 No.3

A successful therapy of community-acquired pneumonia requires appropriate empirical antimicrobial therapy. Etiology and antimicrobial susceptibility of major pathogens of pneumonia can differ by country. Therefore, an ideal treatment guideline of community-acquired pneumonia should be based on the studies performed in each country. We developed a treatment guideline for community-acquired pneumonia in immunocompetent adults in Korea. This guideline was developed by the joint committee of the Korean Society for Chemotherapy, the Korean Society of Infectious Diseases, and the Korean Academy of Tuberculosis and Respiratory diseases.

CM RF CTR 판넬 성형해석에 관한 2차 연구

정동원,안현길,고형훈 제주대학교 공과대학 첨단기술연구소 2005 尖端技術硏究所論文集 Vol.16 No.1

The static implicit finite element method has been effectively applied to analyze total panel stamping processes, which include the forming stage. Complicated and abnormal large size panel was analyzed by using commercial program called AutoForm. Analysis results examining possibility and validity of the AutoForm software and the factor study are presented. Furthermore, the simulated results for the total panel stamping processes are shown and discussed. Its application is being increased especially in the automotive industry for the cost reduction, weight saving and improvement of strength.

수술-교정 치료 환자의 통제 소재

이신재,안석준,백승학,김태우,장영일,양원식,서정훈,남동석 대한치과교정학회 2002 대한치과교정학회지 Vol.32 No.4

교정치료와 악교정 수술을 필요로 하는 환자가 점증하는 현 시점에 비추어, 이에 대한 기술적인 측면의 발전과는 달리 수술-교정 치료 환자에 대한 정신사회학적 혹은 정신심리적 양상에 대한 객관적인 정보는 그리 많은 주목을 받는 편이 아니었다. 수술-교정치료는 과학적인 치료과정이긴 하지만, 어느 정도 심미적 혹은 예술적인 측면을 지니는 선택 치료의 면모를 지닌다. 그러므로 치료에 대한 환자의 주관적인 느낌은 치료 기술이나 치료의 의학적 성공 여부보다 더 큰 영향을 미칠 수 있다. 그러므로, 수술-교정 (혹은 교정) 치료에 대한 환자의 반응을 예측하기 위한 정신심리적인 정보는 치료에 유용한 지표가 될 수 있다고 가정할 수 있다. 통제 소재에 대한 연구는 인간의 다양한 행동을 예측하기 위한 유용한 지표로 알려져 왔는데, 본 연구에서는 42명의 수술-교정치료 환자와 성별/연령별로 표본 추출된 42명의 통상적 교정치료 환자를 대상으로 삼아 정신=심리적 비교 및 분석의 방법으로 두 가지 종류의 내외 통제 소재(internal/external locus of control) 검사를 시행하였다. 그 결과 수술-교정치료군에서만 남자가 여자에 비하여 낮은 외적 통제(높은 내적 통제)의 경향을 보였다. 결론적으로 수술-교정치료 환자의 정신심리적 기반은 성형 수술 환자와는 달리 교정치료 환자와 유사한 경향을 지닌 것으로 생각되었다. Surgical-orthodontic treatment is an increasingly more common dental procedure whose unique psycho-social or psychological feature has not been fairly quantified objectively. Since the treatment of a surgical-orthodontic (or orthodontic) patient is part science and part art, a subjective recognition of a patient about his or her own treatment may be more important than technical success during and after treatment. Therefore, the knowledge of the patient''s underlying psychological status could be useful in the prediction of patient's response to surgical-orthodontic (or orthodontic) treatment. The purpose of this study was to investigate and evaluate the psychological difference between conventional orthodontic patient and surgical-orthodontic patient by using locus of control (LOC) examination. Locus of control scale has been proven to be extremely useful in the prediction of a variety of human behaviors. Two types of locus of control data (I-score, Internal locus of control score ; E-score, External locus of control score) were obtained for 42 surgical-orthodontic patients and randomly selected 42 conventional orthodontic patients (as a control group) matched for age and gender. No statistically significant difference was observed in the scale of internal and external locus of control between the groups of surgical-orthodontic patients, males showed lower E-score (external locus of control score, higher internal locus of control tendency) than females. The results of this study suggested that the psychological background of surgical-orthodontic patients, in contrast with that of cosmetic surgery patients, has a similar disposition with that of orthodontic patients.

집속이온빔을 이용한 3차원 마이크로스케일 몰드 제작 및 폴리머 복제

김충수,안성훈,장동영 한국공작기계학회 2008 한국공작기계학회 추계학술대회논문집 Vol.2008 No.-

Focused ion beam (FIB) sputtering was used to fabricate a low microscale mold having a circular curved structure, as well as variable sizes. Experimentally, in this work, a continuous slicing method, which was modified from two-dimensional slice-by-slice approach developed by Fu, was tested with the aim of excluding the material redeposition phenomena by repeating the discrete slicing process with a combination of spiral scans as part of an overall vector scan. Three types of fabrication strategies, including scan strategy, ion beam condition, and processing parameter, were defined and the mould was fabricated as a function of ion dose for specific dwell times. Through replication technique from fabricated moulds, polymeric microstructures were replicated from polydimethy-lsiloxane (PDMS) and polyurethane acrylate (PUA) and compared with the mould dimension. Furthermore, micro-lens arrays was also fabricated and replicated.