http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이동준,이경남,이석,이상훈,김대홍,Lee, Dong-Joon,Lee, Kyung-Nam,Lee, Suk,Lee, Sang-Hoon,Kim, Dae-Hong 한국의학물리학회 2010 의학물리 Vol.21 No.1
국내에서 방사선치료를 위한 선형가속기 품질관리 프로토콜은 많이 개발되어 왔지만 선형가속기를 기반으로 하는 방사선수술장비의 품질관리 프로토콜 개발은 현재까지 거의 이루어져 있지 않고 있다. 이에 본 연구는 선형가속기 기반 일체형 방사선수술장비인 노발리스의 정확도 및 정밀도를 유지하기 위하여 일간, 주간, 월간, 연간에 주기적으로 시행하여야 하는 노발리스 품질관리 프로토콜을 개발 하고 품질관리 상태의 종합적 확인을 할 수 있는 해부학적 팬텀을 제작하였다. 이를 위하여 국내외의 선형가속기를 이용하는 방사선수술 품질관리 프로토콜의 수집 및 분석을 통해 필수적인 품질관리항목과 각 항목의 허용치를 정하였다. 노발리스 품질관리 항목은 기계적 정확도 부분과 방사선 전달 부분의 2가지로 분리하고 기계적 정확도 부분은 방사선발생 장치부, 보조장치부, 그리고 미세다엽 시준기부의 3가지 부분으로 방사선 전달부분은 치료 중심점 평가와 선량학적 평가의 2가지 부분으로 나누어 작성하였다. 최종적으로 노발리스 품질관리 유지를 위하여 시행하여야 하는 일간, 주간, 월간, 연간의 노발리스 품질관리 항목 표를 완성하였다. 완성된 노발리스 품질관리항목 표는 노발리스가 방사선수술에 적합한 정확도 및 정밀도를 유지하는데 필요한 지표로서 기여 할 수 있을 것이라 생각된다. In Republic of Korea, there are many Quality Assurance protocol for general radiation treatment machine such as linac. However, Quality Assurance protocol for radiosurgery treatment system is not ready perfectly. One of the radiation treatment machine for radiosurgery, novalis system needs to suitable Quality Assurance protocol for using it right way during radiation treatment and maintaining suitable accuracy for daily, weekly, monthly and annually periods. Therefore, in this article, we develop Quality Assurance protocol for novalis system. We collected and analysed domestic and foreign novalis Quality Assurance protocol. After that, we selected essential QA items and each tolerance range for developing proper QA protocol, and we made anatomical phantom for execution of selected QA items and evaluation of overall state of QA, and then, we use this measured value as a reference. Quality Assurance items are consisted of Mechanical accuracy QA part and Radiation delivery QA part. Mechanical accuracy QA part is comprised of radiation generation machine part, assistive devices part and multi-leaf collimator part. Radiation delivery QA part is divided into radiation isocenter accuracy and dosimetric evaluation. After that, developed novalis QA tables are made by using these QA items. These novalis QA tables would be used to good standard in order to maintain apt accuracy for radiosurgery in daily, weekly, monthly and annually periods.
Space holder 방법으로 제조된 다공질 타이타늄의 기계적 성질에 대한 Computed-Tomography를 이용한 유한요소해석
이동준,안동현,이병갑,정지원,오상호,이종수,김형섭,Lee, Dong Jun,Ahn, Dong-Hyun,Lee, Byounggab,Jeong, Jiwon,Oh, Sang Ho,Lee, Chong Soo,Kim, Hyoung Seop 한국분말야금학회 2013 한국분말재료학회지 (KPMI) Vol.20 No.5
In this study, porous titanium samples were manufactured by space holder methods using two kinds of urea and sodium chloride space holders. Three-dimensional pore structures were obtained by a computed-tomography (CT) technique and utilized for finite element analysis in order to investigate the mechanical properties. The CT-based finite element analyses were in better agreement with the experimental results than unit cell model-based analyses. Both the experimental and CT-based results showed the same tendency that the elastic modulus decreased with increasing the porosities. The total porosity of the bulk body plays a key role in determining the elastic modulus of porous materials.
개미 둥지에 서식하는 한국 미기록속 Ippa Walker (나비목, 곡식좀나방과)에 대한 보고
이동준,동민수,김기경,안능호,이봉우,배양섭,Dong-June, Lee,Minsoo, Dong,Ki-Kyeong, Kim,Neung-Ho, Ahn,Bong-Woo, Lee,Yang-Seob, Bae Korean Society of Applied Entomology 2022 한국응용곤충학회지 Vol.61 No.3
The genus Ippa Walker, 1864 is reported for the first time from Korea, with a species I. conspersa (Matsumura, 1931). I. conspersa is generally known as myrmecophiles having ecological relationships with some ant species such as Lasius spp. Photographs of adults, immature stages, and the genitalia of I. conspersa are provided.
이동준,최진원,조승현,Lee, Dong-Jun,Choi, Jin-Won,Cho, Seung-Hyun 한국마이크로전자및패키징학회 2008 마이크로전자 및 패키징학회지 Vol.15 No.3
ENIG 층의 결함구조를 이해하고자 immersion gold 층의 결함을 TEM 분석을 이용하여 분석하였다. 세가지 다른 종류의 금도금액을 통하여 immersion gold 층을 얻은 후 습식적으로 TEM 시편을 만들어 이를 비교하였다 이를 통해 immersion gold 도금액의 종류에 의하여 도금막의 결함구조는 크게 영향을 받음을 확인할 수 있었다. 즉, 시안형 치환형 금도금 액을 이용하여 얻은 immersion 금도금 층인 경우에는 결정계면을 따라서 결함들이 집중적으로 존재함을 관찰할 수 있었다. 반면 유기환원제를 도금액에 첨가한 시안형 부분환원형 금도금 액을 이용하여 얻은 immersion금도금 층인 경우에는 grain boundary를 따라 존재하는 공극은 사라졌지만 $5\sim20nm$ 크기의 구형의 공극이 결정계면, 결정내를 상관하지 않고 존재하고 있음을 확인할수 있었다. 이에 비하여 아황산형 치환형 금도금 액을사용하여 얻어진 금도금 층에서는 이러한 결함들이 거의 사라지는 것을 관찰할 수 있었다. Investigation on immersion gold layers was carried out using TEM analysis for the purpose of understanding the defect of immersion gold layer. The immersion gold layers prepared with three different types of baths were observed. The results showed that the defect structure of immersion gold layer is strongly dependent on the types of gold baths. Spherical defects of average 10 nm size were located along the grain boundaries for the specimen formed at KAu$(CN)_2$ bath containing no reducing agent. In the case of the specimen processed at KAu$(CN)_2$ bath containing a reducing agent, the spherical defects of 5-10 nm size were distributed randomly in grains as well as at grain boundaries. However, such defects disappeared almost completely when $Na_{3}Au(SO_3)_2$ bath was used to fabricate an immersion gold.
이동준,권형안,김지태,정길현,양상운,Lee, Dong Joon,Kwon, Hyeong Ahn,Kim, Ji Tae,Jung, Gil Hyun,Yang, Sang Woon 한국시스템엔지니어링학회 2021 시스템엔지니어링학술지 Vol.17 No.2
Recently, the rapid development of drones is increasing as a variety of threats to important facilities of the country. In order to build an anti-drone system that responds to drones with high technical characteristics, standardization is required in terms of operation, system, and technology. By applying the defense architecture framework, it contributes to the establishment of the optimal system by proposing a standardization plan for the operational and system perspectives of the anti-drone system by creating outputs equivalent to the stage of prior research on weapons systems. It is a prerequisite for building a drone system the operational concept of the anti-drone system, the definition of the drone threat, the function of each component, the interface, the definition of data flow, the system performance and effect scale, etc. Management, security officers, and equipment manufacturers of important national and public facilities on site expect that it will be used as an objective standard at the government level for the component technology of the equipment to respond to the drone threat and the performance required in the environment.
이동준,홍윤기,Lee, Dong-Joon,Hong, Yoon-Gee 한국시뮬레이션학회 2007 한국시뮬레이션학회 논문지 Vol.16 No.3
군의 전투 상황을 모의하는 전투 시뮬레이션 모델을 개발함에 있어서 현대전, 미래전의 핵심인 지휘통제분야에 대한 모의가 필요하다. 본 논문에서는 교전위주의 현재 워게임 모델을 개선하기위해 군의 의사결정과정인 부대지휘절차를 지능형 에이전트를 이용하는 모의방법론을 제시하였다. 계층별 지휘본부를 대리할 수 있는 다중 에이전트의 아키텍처를 설계하고 각각 에이전트의 기본적인 구조와 모의논리를 연구하였다. 본 연구는 지능형 에이전트의 적용대상을 관으로 확대하는 방법론이 될 것이고, 기본구조를 더욱 심화 발전시키면 불확실한 전장상황을 보다 정확하게 모의할 수 있는 기초가 될 것이다. This study suggests a method of command and control in modeling a combat situation. In particular, it presents the structure of an intelligent agent that may substitute for the current system of decision making in the military operation to lead a troop. Today the Korean military war game simulations emphasize on engagements, instead of command and control. This suggested principle will be a good foundation for the today and the future Korean warfare.
이동준,윤은유,강수영,이정환,김형섭,Lee, Dong-Jun,Yoon, Eun-Yoo,Kang, Soo-Young,Lee, Jung-Hwan,Kim, Hyoung-Seop 한국분말야금학회 2012 한국분말재료학회지 (KPMI) Vol.19 No.5
In this study, electrolytic copper powders were consolidated by high-pressure torsion process (HPT) which is the most effective process to produce bulk ultrafine grained and nanocrystalline metallic materials among various severe plastic deformation processes. The bulk samples were manufactured by the HPT process at 2.5 GPa and 1/2, 1 and 10 turns. After 10 turns, full densification was achieved by high pressure with shear deformation and ultrafine grained structure (average grain size of 677 nm) was observed by electron backscatter diffraction and a scanning transmission electron microscope.
분말 표면 조도의 3차원 레이저 분석기를 이용한 정량화와 압분성형체 강도에 미치는 영향 분석
이동준,윤은유,김하늘,강희수,이언식,김형섭,Lee, Dong-Jun,Yoon, Eun-Yoo,Kim, Ha-Neul,Kang, Hee-Soo,Lee, Eon-Sik,Kim, Hyoung-Seop 한국분말야금학회 2011 한국분말재료학회지 (KPMI) Vol.18 No.5
Green strength is an important property of powders since high green strength guarantees easy and safe handling before sintering. The green strength of a powder compact is related to mainly mechanical and surface characters, governed by interlocking of the particles. In this study, the effect of powder surface roughness on the green strength of iron powders was investigated using a transverse rupture test. Three-dimensional laser profiler was employed for quantitative analyses of the surface roughness. Two different surface conditions, i.e. surface roughness, of powders were compared. The powders having rough surfaces show higher green strength than the round surface powders since higher roughness leads increasing interlocked area between the contacting powders.