http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이중 스카치 요크 기구를 이용한 접점 개폐 메커니즘의 설계
양홍익(H. I. Yang),안길영(K. Y. Ahn),정광영(K. Y. Jeong) 한국정밀공학회 2005 한국정밀공학회 학술발표대회 논문집 Vol.2005 No.10월
In this paper, a double scotch yoke mechanism for moving simultaneously the fixed contact and moving contact of a gas circuit breaker is proposed and designed to improve the breaking characteristics of the circuit breaker. Firstly, the design parameters of the scotch yoke are kinematically determined from the desired design condition of the circuit breaker. Next, the stroke curve of the moving contact is designed by considering the design parameter and the specified opening characteristics of electric contacts. Based on the scotch yoke and stroke curve, the dynamics of the electric contacts is analyzed using ADAMS model of switch mechanism.
양홍익(Hong iK Yang),안길영(Kil Young Ahn),양승필(Seung Pil Yang),박우진(Woo Jin Park) 대한기계학회 2012 대한기계학회 춘추학술대회 Vol.2012 No.4
진공회로차단기는 진공인터럽터내의 전기 접점을 ms(milli second) 내에 투입(closing) 또는 차단(opening)시키기 위하여, 스프링에 미리 충전된 탄성에너지를 캠 및 링크들로 이루어진 기구부로 운동에너지를 전달하는 스프링구동 링크기구를 사용한다. 따라서 차단기의 역할이 제대로 이루어지기 위해서 링크기구에 의한 전기접점의 투입과 차단 동적 특성이 중요한 요소가 된다. 본 논문에서는 먼저 VCB의 투입과 차단동작을 분석하기 위하여, 전기 접점과 스프링구동 링크를 가진 구동메커니즘의 동적모델을 구성하고, 개발된 동적모델의 타당성을 실험을 통하여 검증한다. 또한 도출된 동적모델을 이용하여 설계를 개선하고자 한다. A spring-actuated linkage mechanism is a simple and reliable device for movement of heavy loads at a high speed and acceleration. Such a mechanism is used to a vacuum circuit breaker (VCB) which completes switching action within several tens of milliseconds. In a VCB mechanism, the opening and closing dynamic characteristics of electric contacts are very important factors to perform the role of the circuit breaker suitably. In this paper, firstly, to analyze the opening and closing dynamic characteristics of a VCB, the dynamic model was derived using a multibody dynamics program, Pro/E and Recurdyn. Secondly, to satisfy the specified characteristics, Spring and linkages are modified using the dynamic model. The Dynamic model using Recurdyn will be used to analyze the stress loaded on the weak components and improve the fatigue life, because rigid bodies can be easily changed into flexible bodies.
양대웅,강민구,박성경,홍대식,강창언 한국통신학회 1994 韓國通信學會論文誌 Vol.19 No.1
이 논문에서는 주파수 편차가 발생하는 채널에서 패킷 직접 대역확산(Direct-Sequence Spread Spectrum) 블록 수신기의 위상 반전 검출(Phase-jump detection) 오류 여부를 확인하는 PJED(Phase Jump Error Detector)의 성능을 고찰한다. 또한 정합 펄스 순간 추출기를 제시한다. 이동통신 채널상에서 발생하는 기존의 방식보다 간단한 구조를 갖는 정함펄스 순간 추출기를 제시한다. 이동통신 채널상에서 발생하는 주파수 편차는 패킷 DS/SS 블록 수신기를 사용함으로써 효율적으로 추정, 보상할 수 있는데 SNR(Signal to Noise Ratio)이 감소할수록 위상 반전 검출의 오류가 발생하며 이러한 위상 반전 검출의 오류를 방지하기 위한 대안으로서, 이 논문에서는 위상의 선형성을 이용하는 PJED를 제안하고 또한 신호 처리 시간을 단축시키고 수신기의 구조를 간단하게 만드는 정함펄스 순간 추출기를 제안한다. 실험 결과, PJED를 패킷 DS/SS 블록 수신기에 적용시킬 경우에는 PJED가 없는 수신기보다 동일한 BER에서 약 2dB정도의 성능개선을 보여준다. 또한 협대역 간섭신호가 존재할 경우도 약 2dB 정도의 성능향상을 나타낸다. 그리고 본 논문에서 제안한 단순한 구조의 정함펄스 순간 추출기를 사용하여도 정확한 정함 펄스 순간을 판단 할 수 있다. This paper investigates the performance analysis of the packet DS/SS receiver with a PJED(phase-jump error detector) using the block signal processing(BSP) methods. The conventional packet DS/SS block receiver has a high probability of mistaking the phase-jump detection, which causes the frequency estimation error. The conventional receiver uses a Matched-Pulse Timing Extractor which has a complicated structure. The proposed packet DS/SS block receiver with the PJED which uses libearity of the phase has little probability of mistaking the phase-jump detection. The proposed Matched Pulse Timing Extractor gas the more simple structure but obtains the same performance on the exact matched-pluse timing as the conventional one does. The simulation results show that the proposed receiver gives about 2dB improvement in the BER compared with the conventional receiver.