북한산국립공원의 계류수질 보전 전략(I)

박재현,우보명,김우룡,안현철,조현서,추갑철,김춘식,최형태,Park, Jae-Hyeon,Woo, Bo-Myeong,Kim, Oue-Ryong,Ahn, Hyun-Chul,Cho, Hyun-Seo,Choo, Gab-Chul,Kim, Choon-Sig,Choi, Hyung-Tae 한국환경복원기술학회 2001 한국환경복원기술학회지 Vol.4 No.3

This study was conducted to investigate physicochemical property changes from July 1998 to August 2001 in Mt. Bukhansan National Park. Four water sampling points were selected to measure the quality of stream water in the northeastern part of the Mt. Bukhansan National Park. The results were summarized as follows; In spring, the average pH of stream water was below the first class of the river water quality standard, while it was normal level in summer. The average electrical conductivity was about 2.3~3.3 times higher in downstream water than in upstream water during spring and summer. The contents of anions($Cl^-$, $NO{_3}^-$, $SO{_4}^{2-}$) were about 1.1~7.4 and 0.4~11.4 times higher in downstream than in upstream water, respectively. These results indicate that water quality was poorer in downstream than in upstream water. We suggest that stream water in the Mt. Bukhansan National Park should be protected from impacts of snow melting mineral particles in spring season and human impacts like wastewater of point source in summer season.

갑상선 절제 수술 후 Guardix-SG<SUP>Ⱂ</SUP>의 유착방지 효과

박재현,정종주,강상욱,남기현,장항석,정웅윤,박정수,Jae Hyun Park,M.D.,Jong Ju Jeong,M.D.,Sang Wook Kang,M.D.,Kee Hyun Nam,M.D.,Hang Seok Chang,M.D.,Woong Youn Chung,M.D. and Cheong Soo Park,M.D. 대한갑상선-내분비외과학회 2009 The Koreran journal of Endocrine Surgery Vol.9 No.3

Purpose: Postoperative adhesion of the surgical field seems to be troublesome not only to the patients, but also to the surgeons. Guardix-SG<SUP>Ⱂ</SUP> is a poloxamer/alginate mixture that reduced the incidence of postoperative adhesions when it is added to the abdominal surgery in animal models and also in clinical trials. This study was a randomized, prospective, double-blinded study to evaluate the antiadhesive efficacy and safety of Guardix-SG<SUP>Ⱂ</SUP> after total thyroidectomy. Methods: A total of 89 patients who underwent total thyroidectomy between July 2008 and February 2009 in Severance Hospital and Gang-Nam Severance Hospital were randomized to either the Guardix-SG<SUP>Ⱂ</SUP> treatment group (n=45) or the non-treatmentcontrol group (n=44). The patients were asked about their clinical symptoms (hypesthesia or paresthesia on the operative site (SN) and swallowing discomfort (SW)) by using a questionnaire, and the swallowing function was evaluated using Marshmallow Esophagography by one physician. The clinical symptoms and Marshmallow Esophagography were scored according to the results of assessment. The most severe state was scored as 0 and normal was scored as 3. Results: The scores of the clinical symptoms (SN and SW) were 2.67 and 2.49 in the treatment group, and 2.09 and 1.80 in the control group, respectively, at the postoperative 6th week (P=0.001, <0.001). The scores of the Marshmallow Esophagography were 2.93 in the treatment group and 2.73 in the control group (P=0.033). Abnormal findings were seen in 2 patients (4.4%) in the treatment group and in 10 patients (22.7%) in the control group (P=0.014). Conclusion: Guardix-SG<SUP>Ⱂ</SUP> seems to be effective in preventing adhesion after thyroidectomy. Further studies involving a larger number of subjects will be needed to make an application guideline. (Korean J Endocrine Surg 2009;9: 127-132)

국내 건축물 에너지 절감관련 정책 개선방안

박재현,홍태훈,Park, Jae-Hyun,Hong, Tae-Hoon 한국건설관리학회 2010 한국건설관리학회 논문집 Vol.11 No.4

기후변화협약에 따라 선진국을 중심으로 한 세계 30여 개국이 현재 온실가스 의무감축 대상국으로 지정되어있다. 우리나라도 2013 년부터 시작되는 2차 의무감축에 의해 의무감축 대상국에 지정될 가능성이 높다. 이에 최근 정부는 온실가스 저감을 위한 노력이 이루어지고 있으며 온실가스 저감 대책으로 건축물 에너지를 감소하는 것과 관련된 정책을 시행하고 있다. 그러나 국내의 관련 정책은 에너지 절감과 관련된 측면에 있어 해외 사례에 비하여 건축물 개선안 제공 및 건물 개보수시 전문가 검증과 같은 절차가 없다. 이에 따라 이러한 문제점을 보완하는 국내 정책의 개선방안이 정부 단위, 시도 단위의 정책을 기준으로 제시되었다. 하지만 본 연구에서 제시한 개선방안은 개략적인 개선방향으로 세부적인 내용은 향후 추가적인 연구가 필요할 것으로 판단된다. Today, more than thiry countries around the world are designated as a mandatory GHG(GreenHouse Gas) emissions country from the UNFCCC(United Nations Framework Convention on Climate Change). Korea is also possible to designate a mandatory GHG emissions country after Second mandatory emissions which will be started in 2013. Accordingly, Korea government has made efforts to reduce GHG and has enforced energy-related policies to deduce building energy. But there is no process such as providing of existing building improvement recommendations or expert verification for building remodeling in Korea energy-related policies compared with policies in other countries. For this reason, improvements of Korea which divided governments and city provinces are suggested. However suggested improvements are directions, so additional research is needed for detail methods.

폴리머를 이용한 CIS(CMOS Image Sensor) 디바이스용 웨이퍼 레벨 접합의 warpage와 신뢰성

박재현,구영모,김은경,김구성,Park, Jae-Hyun,Koo, Young-Mo,Kim, Eun-Kyung,Kim, Gu-Sung 한국마이크로전자및패키징학회 2009 마이크로전자 및 패키징학회지 Vol.16 No.1

본 논문에서는 웨이퍼 레벨 기술을 이용한 CIS용 폴리머 접합 기술을 연구하고 접합 후의 warpage 분석과 개별 패키지의 신뢰성 테스트를 수행하였다. 균일한 접합 높이를 유지하기 위하여 glass 웨이퍼 상에 dam을 형성하고 접합용 폴리머 층을 patterning하여 Si과 glass 웨이퍼의 접합 테스트를 수행하였다. Si 웨이퍼의 접합온도, 접합 압력 그리고 접합 층이 낮을수록 warpage 결과가 감소하였으며 접합시간과 승온 시간이 짧을수록 warpage 결과가 증가하는 것을 확인하였다. 접합 된 웨이퍼를 dicing 하여 각 개별 칩 단위로 TC, HTC, Humidity soak의 신뢰성 테스트를 수행하였으며 warpage 결과가 패키지의 신뢰성 결과에 미치는 영향은 미비한 것으로 확인되었다. In this paper, the polymer adhesive bonding technology using wafer-level technology was investigated and warpage results were analyzed. Si and glass wafer was bonded after adhesive polymer layer and dam pattern for uniform state was patterned on glass wafer. In this study, warpage result decreased as the low of bonding temperature of Si wafer, bonding pressure and height of adhesive bonding layer. The availability of adhesive polymer bonding was confirmed by TC, HTC, Humidity soak test after dicing. The result is that defect has not found without reference to warpage.

작업자의 작업공구에 따른 근골격계 질환과 작업효율 모델

박재현,김경훈,김재준,Park, Jae-Hyun,Kim, Kyong-Hoon,Kim, Jae-Jun 대한건축학회 2011 대한건축학회논문집 Vol.27 No.2

Due to a massive outbreak in the workplace and a rapid increase of industrial disaster victims, musculoskeletal disorders is recently emerging as a major issue in the field of industry safety and health. Musculoskeletal disorders has already held a high rank of occupational diseases in advanced countries and it is rapidly growing every year in Korea. In particular, it is expected that people working in the construction industry have higher rates of musculoskeletal disorders given that the construction industry requires a higher level of dependence on human labor and laborers' high intensity of physical labor outside. In this regard, targeting laborers involving in building construction, this study attempts to analyze the impact of musculoskeletal disorders which can be shown according to working hand tools, making to model musculoskeletal disorders on efficiency. As a result of analyses, it appears that there are differences in body parts that hurt skeleton and musculature between structural steel laborers and carpenters owing to different working hand tools they use. In case of structural steel laborers, they tend to feel most psychological distress when their necks and shoulders are under stress. In contrast, carpenter is likely to be agitated when their legs and knees are exposed to stress. Accordingly, this study is worthwhile by finding out different levels of musculoskeletal stress and different body parts depending on the tools laborers use, in turn proving that this has an impact on efficiency through modeling and quantifying it.

최적화된 Hough 변환에 근거한 효율적인 차선 인식

박재현,이학만,조재현,차의영,Park Jae-Hyeon,Lee Hack-Man,Cho Jae-Hyun,Cha Eui-Young 한국정보통신학회 2006 한국정보통신학회논문지 Vol.10 No.2

본 논문에서는 차선 추출을 위해서 OHT(Optimized Hough Transform) 알고리듬을 제안한다. 입력 영상을 그레이 영상으로 변환하고 변환된 그레이 영상은 수평 투영을 통해 주변 배경 영역과 도로 영역으로 분리된다. 분리된 도로 영역에서 OHT(Optimized Hough Transform) 알고리듬을 적용한다. OHT(Optimized Hough Transform) 알고리듬은 다음과 같이 특징지어진다. 첫째, 윤곽선 방향각을 이용해서 차선후보 픽셀을 최소화하였으며, 둘째, 좌우 차선의 범위는 제한된 ${\theta}$값으로서 정의하였다. 실험 결과, 제안한 알고리듬이 기존의 Hough Transform보다 훨씬 효율적임을 알 수 있었다. In this paper, we propose OHT(optimized nough Transform) algorithm for the lane extraction. Input image is changed into 256 gray revel image. Gray level image is separated into background region and road region by using limited horizontal projection value. In separated road area, we apply OHT algorithm. OHT algorithm is characterized as follows. First, the number of candidate pixels is reduced using the outline orientation of the lane. Second, each range of the left and right lane is defined by limited ${\theta}$ Experimental results show that the proposed method is better than Hough Transform.

게임 기획 산출물의 일관성 유지를 위한 변경 추적 기법

박재현,이두원,류성열,Park Jae-Hyun,Yi Du-Won,Rhew Sung-Yul 한국정보처리학회 2006 정보처리학회논문지D Vol.13 No.1

한국게임산업개발원에서 연구 발표한 게임제작 프로세스와 게임 기획서 표준양식은 게임 산업을 위한 중요한 초석이 되었다. 그러나 게임기획은 기획자의 새로운 아이디어와 변경으로 정확한 산출물을 작성할 수 없어 소프트웨어의 품질을 보장할 수 없다. 본 연구에서는 기획단계에서 생성되는 산출물들을 일관성 있게 유지 관리하고 변경된 내용을 추적할 수 있는 체계를 정립하였다. 첫째, 각 산출물간의 연관관계를 표현하늘 ACT그래프, 산출물의 변경을 추적 관리를 위한 ACT 테이블 및 산출물 변경 이력 테이블을 정의하였다. 또 이를 활용한 게임 기획 ACT 프로세스를 제시하였다. 제시한 추적 기법의 유효성을 검증하기 위하여 사례연구를 통해 게임 기획 산출물의 변경 발생시 게임 기획자가 관련 산출물과 항목을 신속히 파악하고 변경 가능한 것을 확인함으로써 게임 기획 산출물의 일관성 유지 노력과 시간을 절약할 수 있음을 보였다. The Game development process that the Korea Game Development Infinity researches and publishes has laid important groundwork for the game industry. However, the game design cannot guarantee a software quality because an artifact is made incorrect by a game planner's new idea and modification. In this paper theorized the system to maintain artifacts consistently that is generated in planning phase and make changed contents traceable. First, it defined an ACT graph to represent relation of between artifacts, a ACT table that traces and manages it changes and a table of artifacts change history. Also, it suggested the ACT process applying as we mentioned above. Then we worked a case study to verify the change tracking technique which is presented. In a case study, we find game designer is capable to grip and modify a change of artifacts when it occurs a change of game design artifacts. As a result of that, we can save the time and effort to maintain the consistency among game design artifacts.

당뇨병 환자에서 관절경적 회전근 개 봉합술 후 발생한 화농성 견관절염의 치료 - 증례 보고 -

박재현,최원기,김세식,최창혁,Park, Jae-Hyun,Choi, Won-Ki,Kim, Se-Sik,Choi, Chang-Hyuk 대한관절경학회 2009 대한관절경학회지 Vol.13 No.1

당뇨환자로서 관절경적 회전근 개 봉합술을 시행 후 견관절의 화농성 관절염으로 진단된 2예에 대해 관절경적 치료 및 추가적인 개방성 치료를 시행하였다. 관절경적 회전근 개 봉합술 후 감염은 평균 18일 뒤에 발생하였으며, 증상 발현으로부터 수술까지의 평균 기간은 65일이었다. 또한 기능 평가는 KSS, ASES, UCLA, Constant 점수를 이용하였다. 관절경적 변연 절제술과 추가적인 시술 후 평균 22.5일의 항생제 치료로 4개월에 염증이 치료되었으며 최종 결과는 KSS점수가 82점, UCLA점수가 33점, ASES점수가 91점, Constant점수가 71점이었다. 관절경적 회전근 개 봉합술 후 발생한 화농성 견 관절염은 관절경적 치료 및 추가적인 시술로 치료되었고, 관절 운동 범위 및 기능적 결과와 통증 및 만족도는 많이 개선되었다. Two diabetes mellitus patients treated by arthroscopy and associated procedure for an infection after arthroscopic rotator cuff repair were involved. The time interval from rotator cuff repair to symptom development was 18 days in average and arthroscopic debridement and associated procedure for infection applied in average 65 days after symptom development. Patient evaluation was done according to the KSS, ASES, UCLA and Constant Score. We used antibiotics for average 22.5 days after arthroscopic debridement and associated procedure, the infection was treated in average 4 months. At final follow-up, the mean KSS score was 82 points, the mean UCLA score was 33 points, the mean ASES score was 91 points, the mean Constant score was 71 points. All infections following arthroscopic rotator cuff repair were cured by arthroscopy and associated procedure. ROM and functional results were much improved, the pain and satisfaction were also much improved.

얇은 정사각형 용기 내의 스핀-업 유동에 관한 수치해석적 연구

박재현,서용권,Park, Jae-Hyun,Suh, Yong-Kweon 대한기계학회 2002 大韓機械學會論文集B Vol.26 No.7

Spin-up is a transient flow phenomenon occurring in a container when it starts to rotate from rest or its rotational speed increases from a low to high value. However, most studies on this subject have been for two-dimensional approximation. In this study, spin-up flows in a shallow rectangular container are analysed by using three-dimensional computation. We compared our results with those obtained by others using basically two-dimensional computation. Effect of two parameters, Reynolds number and liquid depth on the flow evolution is studied. We found that 2-D result is not accurate enough, and the vertical velocity distribution should be assumed of a fourth-order polynomial function for a better comparison.

건설기업의 지식경영 수준 평가모델개발에 관한 연구

박재현,백종건,김재준,Park Jae-Hyun,Baik Jong-Keon,Kim Jae-Joon 한국건설관리학회 2002 한국건설관리학회 논문집 Vol.3 No.4

국내의 건설기업들은 건설시장의 개방 및 경쟁의 심화에 따라 국제 경쟁력의 강화 및 지속적인 경쟁우위를 점하기 위하여 지식경영을 도입하여 개인의 지식들을 조직의 역량강화에 노력하고 있다. 그에 따라 학문적 측면에서도 지식경영의 발전이 계속적으로 이루어져 왔으며 오늘날에는 지식경영을 도입한 기업들의 수준 평가나 성과에 많은 관심을 보이고 있다. 하지만 실제 연구에 있어서는 성과부분에 너무 치우쳐서 정확한 수준 평가 없이 성과에 대한 언급만을 하고 있는 실정이다. 따라서 본 연구는 건설기업으로 하여금 정확한 지식경영의 수준을 평가하여 지식경영의 여러 영역 중에서 좀더 관심을 기울여야 할 분야를 제시함으로써 지식경 영을 균형적으로 발전시킬 수 있는 건설기업의 지식경영 수준 평가모델을 제시하였다. Knowledge Management(KM), represented as a way to sustain or gain competitive edge in domestic construction companies since late 1990s economic fluctuation, whose priority is to transform individual tacit knowledge into explicit organizational one. Also, accompanied by academic researches, they come to turn their interests on KM leveling and its results. However, they went too far to KM results without commenting what their KM capabilities are and where they should lead. Thus, this research work suggests a leveling model for KM, especially construction company, whose role is to diagnose which parts they should be encouraged or how to strengthen their present capabilities.