http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김형채 한국통신학회 2018 정보와 통신 Vol.35 No.5
오픈소스 소프트웨어는 인공지능(AI), 사물인터넷(IoT), 클라우드 빅데이터 등 다양한 분야에서 4차 산업혁명과 지능정보사회의 핵심 기술로 부상하고 있다. 글로벌 시장에서는 구글, 페이스북 같은 글로벌 대기업도 개방형 혁신활동을 중요하게 여기며 이를 위하여 자사의 기술을 외부에 공개하고 오픈소스 커뮤니티를 중심으로 핵심기술을 주도하려는 노력을 하고 있다. 본 고에서는 이러한 오픈소스 커뮤니티의 성장과정을 살펴보고 이상적인 오픈소스 커뮤니티의 구축에 필요한 요소를 알아본다.
공개소프트웨어 기반의 개방형 혁신 연구개발 역량 성숙도 모델
김형채 한국통신학회 2019 정보와 통신 Vol.36 No.11
본 고에서는 최근 급증하고 있는 오픈소스 프로젝트 수행 방식으로 진행되는 개방형 연구개발 프로젝트 수행조직에서 조직 내 연구개발을 수행할 수 있는 역량수준을 관리하고 개선하기 위한 성숙도 모델에 대하여 알아본다.
기지국 어레이 안테나와 불완전 전력 제어를 고려한 DS/CDMA 셀룰라 시스템의 성능 분석
김형채,김항래,김남,한태영,kim, Hyoung-Chae,Kim, Hang-Rae,Kim, Nam,Han, Tae-Young 한국전자파학회 2001 한국전자파학회논문지 Vol.12 No.5
본 논문은 다중접속 간섭을 효과적으로 제거할 수 있는 기지국 어레이 안테나를 이용하여 전파음영 환경하에서 빔 형성 알고리즘과 전력 제어 오차에 따른 DS/CDMA 셀룰라 시스템의 역방향 링크에 대한 성능을 분석한다. 블로킹(blocking) 확률을 어레이 파라미터와 E$_{b}$/N$_{o}$ 및 간섭 통계를 이용하여 유도하고 특정한 블록킹 확률에 일치하는 시스템 용량을 계산하다. 1%의 블록킹 확률을 가정하였을 경우, 동방성 안테나 1개를 사용하는 경우보다는 12개의 어레이 안테나를 이용한 MCGM 알고리즘을 사용하였을 경우에 약 32배의 시스템 용량이 증가함을 보인다. In this paper, the reverse link performance of a imperfect power controlled DS/CDMA cellular system that uses a base station array antenna which can effectively remove the multiple access interference is analyzed considering both beam forming algorithm and power control error in shadowing. The blocking probability of the DS/CDMA cellular system based on array parameters, $E_b/N_o$ and statistics of interference is derived, and then the system capacity corresponding to a certain blocking probability is calculated. On the assumption that the blocking probability is set 1%, the system capacity using MCGM algorithm with 12 antenna arrays is more increased maximum 32 times than that using a omni-directional antenna and about 2 times than that using MMSE algorithm, respectively.
오픈소스 소프트웨어 활성화를 위한 성숙도 및 적용성 평가 모델(OSMAAM)의 설계 및 구현에 관한 연구
정윤재,오승운,김형채,박진홍,김근동 한국정보화진흥원 2013 정보화정책 Vol.20 No.1
본 연구는 오픈소스 소프트웨어(OSS, Open Source Software)의 실질적인 활용을 증대시키기 위해 성숙도뿐 아니라 적용성까지 평가하는 모델과 구현 방법을 제시한다. 이 모델은 기존 모델에서 평가될 수 없었던 적용성을 측정하기 때문에, OSS를 신규 도입하거나, 상용 소프트웨어를 OSS로 대체, 또는 OSS를 상용 소프트웨어와 비교 시 활용할 수 있도록 사용자들을 지원한다. 이 모델의 설계 및 구현을 위해 7단계의 방법론을 제시하였고, 설문을 실시하여 모델의 타당성과 신뢰성을 검증하였다. 또한, 이 방법론을 기반으로 인프라 부분에서 OSS에 대한 성숙도와 적용성을 평가하는 실제적인 예를 제공함으로써 이 모델의 실용성을 입증하였다. 향후 일반 사용자뿐만 아니라 정보화 담당자들까지도 산업적인 적용을 위해 최적의 OSS를 이 모델을 활용하여 선정할 수 있을 것이다. 따라서 본 연구의 결과가 OSS 활성화 정책에 크게 기여할 것으로 기대된다. This study presents a model and its implementation methodology assessing not only maturity but also applicability in order to increase the practical usage of open source software(OSS). Since this model measures applicability which can not be assessed by the previous models, it is able to support users in many ways when they introduce OSS for the first time, replace commercial software with OSS, and compare OSS with commercial software. For the purpose of design and implementation of this model, we presented a methodology with 7 phases and conducted a survey to evaluate the appropriateness and reliability of the model. In addition, we proved the practical usability of the model by providing a practical example assessing maturity and applicability of OSS in the area of the infra category on the basis of the methodology. In the future, not only general users but also officers in charge of informatization will be able to select optimal OSS by using this model for industrial application. Therefore, the result of this research is expected to greatly contribute to OSS promotion policy.
김정규,오재민,김형채 대한기계학회 1985 대한기계학회논문집 Vol.9 No.5
본 논문에서는 미시조직인자를 변화시킨 마르텐사이트-페라이트 복합조직강을 준비하여 균열선단 및 안정영역의 파괴양상과 파괴저항과의 관계를 검토하였다. The estimation of fracture toughness in inhomogeneous material is still insufficient because it is difficult to get information of fracture initiation at the crack tip. Therefore, martensite-ferrite dual phase steel was prepared for a model material and micro-fracture behavior was investigated in the region of pre-fatigue crack in order to understand the characteristic of fracture resistance in inhomogeneous materials. In the case of severely inhomogeneous state, micro-fracture appearance is not distributed homogenously so that the estimation of fracture toughness is hardly possible. On the other hand when the grain size is refined or the strength of martensite is lowered, micro-fracture appearance is distributed homogenously and fracture toughness remarkably increases.
Optical Design and Manufacturing Technology for High Resolution Laser Scanning Unit
김욱배,김형수,유재환,김형채,문수동 한국정밀공학회 2009 International Journal of Precision Engineering and Vol.10 No.5
This paper presents optics and fabrication process of key elements in a laser scanning unit for high quality laser beam printers or multi-function printers with over 600dpi optical resolution which today’s commercial system shows. Considering the light sources with different wavelength, optical characteristics in the laser scanning unit which includes a scanning lens and an athermalization element are explained. Also fabrication technologies to realize high resolution laser system such as mold design, core machining and injection molding processes are described. Finally, the hybrid lens as the athermalization element having refractive and diffractive surface is suggested to compensate thermal defocus. The hybrid lens is fabricated and their performance and effect on laser scanning unit are evaluated.