신라 중고기골제(中古期骨制)의 성립과 운영

박수진 ( Soo Jin Park ) 수선사학회 2011 史林 Vol.0 No.39

The Golpum system was the unique form of the status system in the Silla dynasty in Korea. It was a typical ancient Korean society`s status system which has been investigated field in the academia. In particular, a kinship system, which is composed of Seong-gol and Jin-gol, is the most hottest issue in the Korean academic circles. However, there is a no point of agreement whether Seong-gol was the reality or not, and concerning about its management and times. This research has a purpose to investigate how the status system established and guaranteed in the society. The Buddism has attracted public attention as a theoretical basis of the status system. The Samkuksagi (The chronics of the three nations) described the Buddism as a state religion while it did not focus on the myths about the Buddism. We assume that the Buddism was the meaningful political controller in the Silla dynasty. Seong-gol was regarded as the royal familiy, and it was available when the King had the superiority over the nobility. The Kings of Sylla dynasty had been called the Great King with a qualifier ``saint`` when the Buddism instituted a state religion. It means that Seong-gol (the saunt family) was established based on the Buddism. Jin-gol also entered a field of history similar times to Seong-gol, and both two terminologies was established the same period in terms of the Buddism terminology. Seong-gol guaranteed a royal family`s prestige through the change of ennoble system Galmun King and the use of the Great King title. The King`s brother, who were Seong-gol, secured the superiority over the nobility by getting the title of ennoblement. The Kings also solidified their status through the ennoble system, and they monopolized political power because the kings restrained the right of succession only kings heirs. Jin-gol also guaranteed their political prestige after established Daedeung. The House of Lords in Silla dynasty limited the qualification only who had the title of Daedeung. Jin-gol class took the reins of the nobility through only Jin-gol getting the title of Daedeung.

학술발표회 초록 ( 열역학 (Ⅱ) ) : Butane - Methanol , Butane - Ethanol 계의 90℃ 등온 기액상평형과 과잉 몰엔탈피

박수진,박소진 ( Soo Jin Park,So Jin Park ) 한국화학공학회 1994 춘계학술발표회 Vol.- No.-

제올라이트/DGEBA 복합재료의 경화 동력학과 기계적 계면특성

박수진,김영미,신재섭,Soo-Jin Park,Young-Mi Kim,Jae-Sup Shin 대한화학회 2003 대한화학회지 Vol.47 No.5

In this work, the zeolite/diglycidylether of bisphenol A(DGEBA) systems were investigated in terms of the cure kinetics and mechanical interfacial properties of the composites. The 4, 4-diamino diphenyl methane(DDM) was used as a curing agent for epoxy. Two types of zeolite(PZ) were prepared with 15 and 35 wt% KOH treatments(15-BZ and 35-BZ, respectively) for 24 h, and their surface characteristics were studied by X-ray photoelectron spectroscopy (XPS) and X-ray diffraction(XRD). Cure kinetics of the composites were examined in the context of differential scanning calorimetry(DSC), and mechanical interfacial properties were investigated in critical stress intensity factor($K_{IC}$) and critical strain energy release rate($G_{IC}$). In the results of XPS and XRD, sodium ion(Na) of zeolite was exchanged for potassium ion(K), resulting from the treatment of KOH. Also, $Si_{2p}/Al{2p}$ composition ratios of the treated zeolite were increased, which could be attributed to the weakening of Al-O bond in framework. Cure activation energy($E_a$) of 15-BZ composites was decreased, whereas KIC and $G_{IC}$ were increased, compared with those of the pure zeolite/DGEBA composites. It was probably accounted that the acidity of zeolite was increased by surface treatments and the cure reaction between zeolite and epoxy was influenced on the increased acidity of zeolite. 본 연구에서는 표면처리된 제올라이트에 따른 제올라이트/DGEBA의 경화 동력학과 기계적 계면특성을 고찰하였다. 경화제는 4, 4''-diamino diphenyl methane(DDM)을 사용하였으며, 제올라이트는(PZ) 15와 35 wt% KOH (15-BZ 그리고 35-BZ)로 표면처리하여 XPS와 XRD로 분석하였다. 경화 동력학은 DSC로 분석하였으며, 시편의 기계적 계면특성은 임계응력 세기인자(critical stress intensity factor, $K_{IC}$)와 임계변형에너지 방출속도(critical strain energy release rate, GIC)를 통하여 알아보았다. XPS와 XRD의 결과로부터, KOH로 표면처리된 제올라이트는 나트륨 (Na)이 칼륨(K)으로 이온교환되었으며, 표면처리로 인한 Al-O의 결합세기의 약화로 $Si_{2p}/Al{2p}$의 값이 증가하였다. 동적 DSC와 기계적 계면특성 결과로부터, 제올라이트/DGEBA 중에서 15-BZ의 경화 활성화에너지($E_a$)는 감소하였으며, $K_{IC}$와 $G_{IC}$는 증가하였다. 이러한 결과들은 제올라이트의 표면처리에 의해 산성도가 증가하였으며, 이렇게 증가된 산성도가 제올라이트와 에폭시 사이의 경화반응에 영향을 준 것으로 관찰된다.

인영기구맥법을 이용한 한의사 A씨의 체질감별 재현성 및 QSCCII체질과의 일치율 분석

박수진,권영규,Park Soo-Jin,Kwon Young-Kyu 대한동의생리학회 2006 동의생리병리학회지 Vol.20 No.1

We verified the reproducibility of constitution by IGM and the agreement rate between sasang constitution by QSCCII and constitution by IGM. We analyzed the results of 64 subject who were judged as identical sasang constitution by repeated QSCC II. First, we compared the two results of constitutions by IGM hat peformed by one O.M.D(Oriental Medicine Doctor) at an interval of one year. Second, we examined hypothesis established by one O.M.D, that is about relation of constitutions by IGM and QSCCII, such as I type-Taeeumin, II type-Soyangin and III type-Soeumin in constitutions. There were no statistical significances in reproducibility of constitution by IGM. Although there was a tendency of relevance of sasang constitution by QSCC II with constitution by IGM, there was no statistical significance. Hypothesis that is established by clinical experiences must be verified by an effective statistical method. And there is a necessity to complement the method including mechanical measurements about constitution classification which are performed by a diagnosis relying on individual intuition.

무당벌레(Harmonia axyridis)성충 더듬이에 분포하는 감각기의 구조

박수진,오현우,윤영남,박호용,Park, Soo-Jin,Oh, Hyun-Woo,Youn, Young-Nam,Park, Ho-Yong 한국현미경학회 2001 Applied microscopy Vol.31 No.1

무당벌레(Harmonia axyridis)성충 더듬이에 분포하는 감각기를 주사전자현미경으로 관찰하였다. 무당벌레 성충 더듬이에서 형태적으로 크게 차이를 보이는 5종류의 감각기, $B\ddot{o}hm$, Basiconic, Chetiform, Trichoid 그리고 Coeloconic sensilla를 관찰할 수 있었다. $B\ddot{o}hm$ sensilla는 자루마디와 팔굽마디 기부안쪽의 등쪽면과 배쪽면에서만 관찰되었고, 이것은 분포된 위치로 미루어 더듬이의 움직임과 위치를 확인하는 자기반응감응성 감각기로 보여진다. Basiconic sensilla와 Chetiform sensilla는 형태적 차이에 의하여 3가지 subtype으로 나눌 수 있었으며, Trichoid sensilla는 암 수컷 더듬이 모두에서 더듬이 말단의 2마디에서만 확인되었다. 무당벌레 성충 더듬이에서 관찰된 sexual dimorphism은 더듬이 감각기의 분포와 종류가 있었는데 이것은 암컷과 수컷간의 더듬이 감각기의 분포가 다르게 나타났으며, 감각기의 다양성이 가장 높게 나타난 말단마디의 배쪽면에서 관찰된 Coeloconic sensilla는 수컷에서만 관찰되었고, Trichoid sensilla의 경우 수컷보다 암컷에서 더 많이 관찰되었다. 이러한 sexual dimorphism은 동종의 성상호간 통신에 이용되는 것으로 보여진다. The antennal sensilla of the adult male and female ladybird beetle, Harmonia axyridis (Coleoptera: Coccinellidae) were examined by scanning electron microscopy. Nine types of sensilla were characterized and grouped into 5 morphological classes: $B\ddot{o}hm$, basiconic, chetiform, coeloconlc, and trichoid sensilla. $B\ddot{o}hm$ sensilla were localized on the scape and pedicel, part of the ventral and dorsal proximal side. This placement suggests a role in proportion of antennal position and movement. Basiconic and chetiform sensilla were divided into 3 subtypes by morphology and length differences. Trichoid sensilla are confined to the last 2 flagellum segments on both sexes. Sexual dimorphism of antennal sensilla is limited to the three types of difference. The principal characteristics of this dimorphism are the following: a) The distribution of sensilla was differ from male and female in antennae. b) Males exhibit coeloconic sensilla not present in females; c) Females posses more trichoid sensilla than males. The possible role of specific dilference of the sensilla in intersexual communication is discussed.

가방 휴대 방법이 보행 시 발바닥 접촉 양상에 미치는 영향

박수진,권유정,김민희,김진상,Park, Soo-Jin,Kwon, Yoo-Jung,Kim, Min-Hee,Kim, Jin-Sang 대한물리치료과학회 2011 대한물리치료과학회지 Vol.18 No.2

Purpose: The purpose of this study was to analyze the changes of parameters of foot contact by various carrying a pack methods during walking. Method: The subjects were consisted of normal forty four persons (males 30, females 14, mean age 23). The carrying a pack methods were classified into five conditions: carrying no bag(Con 1), carrying a backpack(Con 2), carrying a shoulder bag(Con 3), carrying a cross bag(Con 4), carrying a one-hand bag(Con 5). All subjects were participated in these five condition and measured foot pressure by F-scan system during walking. Then foot contact time, foot contact area, foot contact length and width were measured and analyzed. The repeated one-way analysis of variance (ANOVA) was used to get difference between conditions and independent t-test was used to get difference between left and right foot within condition. Result: In the comparison of parameters of foot, contact time, contact area and mid foot width were significantly different between conditions(p<.05), and in both foot contact time at condition 5 showed the most significant reduction(p<.05). In the comparison of parameters of foot between left and right foot within condition, every conditions were not significantly different(p>.05). Conclusion: In this study various carrying methods changed the parameters of foot contact and showed significant difference in some articles between carrying methods. However, asymmetric load of pack by carrying methods didn't affected symmetry of parameters of foot contact between left and right foot.

Ti-capping층이 NiSi의 열적안정성에 미치는 영향

박수진,이근우,김주연,전형탁,배규식,Park, Soo-Jin,Lee, Keun-Woo,Kim, Ju-Youn,Jun, Hyung-Tak,Bae, Kyoo-Sik 한국재료학회 2003 한국재료학회지 Vol.13 No.7

Ni and Ti films were deposited by the thermal evaporator, and then annealed in the N$_2$ ambient at 300-80$0^{\circ}C$ in a RTA(rapid thermal annealing) system. Four point probe, AEM, FESEM, AES, and XPS were used to study the effects of Ti-capping layers on the thermal stability of NiSi thin films. The Ti-capped NiSi was stable up to $700^{\circ}C$ for 100 sec. RTA, while the uncapped NiSi layers showed high sheet resistance after $600^{\circ}C$. These results were due to that the Ni in-diffusion and Si out-diffusion were retarded by the capping layer, resulting in the suppression of the formation of NiSi$_2$and Si grains at the surface.

PEI/DGEBA 블랜드계의 열적특성 및 파괴인성

박수진,진성열,강신영,Park, Soo-Jin,Jin, Sung-Yeol,Kaang, Shinyoung 한국접착및계면학회 2003 접착 및 계면 Vol.4 No.3

본 연구에서는 이관능성 에폭시 (diglycidyl ether of bisphenol A. DGEBA)와 Polyetherimide(PEI) 블랜드를 Amime계 경화제인 DDM을 이용하여 경화를 시켰으며, PEI의 함량 변화가 순수 에폭시 수지의 열적특성과 파괴인성에 미치는 영향에 대해 고찰하였다. 경화된 시편의 열적특성은 DSC에 의한 열분석을 통해 Kissinger 식을 이용하여 경화 활성화 에너지 ($E_a$)를 구하였고, 파괴인성은 크랙성장의 저항을 나타내는 임계응력세기 인자 ($K_{IC}$)을 측정하여 알아보았다. 시편의 파단특성은 주사전자현미경 (SEM)을 통해 조사하였으며, 기계적 계면특성을 알아보기 위해 contact angle로 표면자유에너지를 측정하였다. 실험 결과 DGEBA/PEI 블랜드계의 $E_a$, $K_{IC}$는 PEI 함량이 7.5 phr에서 최대값을 보였다. 이는 PEI 도입에 따른 치밀한 네트워크 구조가 증가했기 때문으로 판단되어 진다. 또한 DGEBA/PEI 블랜드계의 표면자유에너지는 $K_{IC}$와 유사한 경향을 보였으며, 이는 에폭시의 하이드록실기와 PEI의 imide 그룹 사이의 수소결합에 의해 극성요소가 증가되었기 때문으로 판단되어진다. In this work, diglycidyl ether of bisphenol A (DGEBA)/polyetherimide (PEI) blends were cured using 4,4-diaminodiphenyl methane (DDM). And the effects of addition of different PEI contents to neat DGEBA were investigated in the thermal properties and fracture toughness of the blends. The contents of contents of containing PEI were varied in 0, 2.5, 5, 7.5, and 10 phr. The cure activation energies ($E_a$) of the cured specimens were determined by Kissinger equation and the mechanical interfacial properties of the specimens were performed by critical stress intensity factor ($K_{IC}$). Also their surfaces were examined by using a scanning electron microscope (SEM) and the surface energetics of blends was determined by contact angles. As a result, $E_a$ and $K_{IC}$ showed maximum values in the 7.5 phr PEI. This result was interpreted in the increment of the network structure of DGEBA/PEI blends. Also, the surface energetics of the DGEBA/PEI blends showed a similar behavior with the results of $K_{IC}$. This was probably due to the improving of specific or polor component of the surface free energy of DGEBA/PEI blends, resulting in increasing the hydrogen bonding of the hydroxyl and imide groups of the blends.

활성탄소의 산 - 염기 표면처리에 따른 N2 , CO2 및 NH3 - 흡착거동

박수진,김기동,이재락 ( Soo Jin Park,Ki Dong Kim,Jae Rock Lee ) 한국공업화학회 1998 공업화학 Vol.9 No.6

Design of Quaternary Logic gate Using Double Pass-transistor Logic with neuron MOS Threshold gate

박수진,윤병희,김흥수,Park, Soo-Jin,Yoon, Byoung-Hee,Kim, Heung-Soo Institute of Korean Electrical and Electronics Eng 2004 전기전자학회논문지 Vol.8 No.1

다치 논리 패스 게이트는 다치 논리를 구성하기 위한 중요한 소자이다. 본 논문에서는, 뉴런 $MOS({\nu}MOS)$ 임계 게이트를 갖는 2중 패스-트랜지스터 논리를 이용하여 4치 MIN(QMIN)/negated MIN(QNMIN) 게이트 그리고 4치 MAX(QMAX)/negated MAX(QNMAX) 게이트를 설계하였다. DPL은 입력 캐패시턴스의 증가 없이 게이트 속도를 향상 시켰다. 또한 대칭 배열과 2중 전송 특성을 갖는다. 임계 게이트는 ${\nu}MOS$ 다운 리터럴 회로(DLC)로 구성 된다. 제안된 게이트는 다양한 다치 임계 전압을 실현할 수 있다. 본 논문에서, 회로는 3V의 전원 전압을 사용하였고 0.35um N-Well 2-poly 4-metal CMOS 공정의 파라메터를 사용하였으며 모든 모의 실험은 HSPICE를 이용하였다. A multi-valued logic(MVL) pass gate is an important element to configure multi-valued logic. In this paper, we designed the Quaternary MIN(QMIN)/negated MIN(QNMIN) gate, the Quaternary MAX(QMAX)/negated MAX(QNMAX) gate using double pass-transistor logic(DPL) with neuron $MOS({\nu}MOS)$ threshold gate. DPL is improved the gate speed without increasing the input capacitance. It has a symmetrical arrangement and double-transmission characteristics. The threshold gates composed by ${\nu}MOS$ down literal circuit(DLC). The proposed gates get the valued to realize various multi threshold voltages. In this paper, these circuits are used 3V power supply voltage and parameter of 0.35um N-Well 2-poly 4-metal CMOS technology, and also represented HSPICE simulation results.