새터민의 기초직업능력 진단

이찬,이용환,이윤조,신재호,홍윤선,최홍주 한국농업교육학회 2007 농업교육과 인적자원개발 Vol.39 No.3

이 연구는 새터민의 고용현황 및 문제점을 고찰하고 새터민의 기초직업능력을 진단하여 직업능력개발 방향에 있어 시사점을 제공하는데 그 목적이 있었다. 새터민의 기초직업능력 진단을 위한 도구는 관련 문헌 고찰과 pilot test 및 새터민 교육ㆍ지원 담당자의 안면타당도 검증 등을 통하여 개발되었다. 연구의 목적을 달성하기 위하여 현재 하나원에서 사회 적응교육 및 직업교육을 받고 있는 새터민의 기초직업능력을 진단함으로써 우리나라에 거주하는 새터민의 기초직업능력을 파악하였다. 주요 결과는 다음과 같다. 첫째,새터민들의 기초직업능력 중에서 직업윤리능력은 상당히 갖추어져 있는 것으로 인식하고 있으며,정보능력,즉 컴퓨터 사용능력은 상대적으로 낮은 수준으로 평가하고 있다. 둘째,성별에 따라서는 기초직업능력에 있어서 통계적으로 유의미한 차이를 보이지 않았다. 연령에 따라서는 정보능력과 수리 능력,조직이해능력 영역에 있어서 통계적으로 유의미한 차이를 보였다. 셋째,학력에 따라서는 문제해결능력과 의사소통능력,수리능력,대인관계 영역에 있어서 통계적으로 유의미한 차이를 보였다. 넷째,새터민의 취업을 위한 기초직업능력 개발에 있어 정보능력,수리능력,의사소통능력의 비중 확대,수준별ㆍ맞춤형 교육프로그램개발,새터민을 위한 취업 및 사업정보 제공 등을 제시하였다. The purpose of this study was to explore the current employment status and HRD issues of North Korean refugees and to assess their level of the basic vocational competencies. The assessment tool for the basic vocational competencies was developed based on literature reviews and pilot tests from the North Korean refugees. The face validity was verified by educators and counselors for the North Korean refugees. The major findings in this study were as follows: First, among the basic vocational competencies of the North Korean refugees, the level of vocational ethics was the highest and the level of information teachnology competency was the lowest. Second, the North Korean refugees' basic vocational competencies showed no statistical differences by gender. Territories of information competency, mathematical competency, and communication competency showed statistical differences by age. Third, territories of problem-solving competency, communication competency, mathematical competency, mathematical competency, and communication competency showed statistical differences by education level. Fourth, to develop the basic vocational competencies for North Korean refugees, the following suggestions were presented.; 1) extend the importance of information technology, mathematical, and communication competencies,; 2) develop the customized training programs by competency level,; and 3) offer the employment information for North Korean refugees.

김치유래 젖산균의 균체지방산 분석을 이용한 분류학적 연구

이정숙,정민철,김우식,이근철,김홍중,박찬선,이헌주,주윤정,이근종,안종석,박완,박용하,민태익 한국미생물생명공학회 ( 구 한국산업미생물학회 ) 1996 한국미생물·생명공학회지 Vol.24 No.2

표준균주를 포함한 230여개의 김치유래 젖산균에 대한 균체지방산(FAMEs)을 분석하였다. FAMEs profiles는 Euclidian Distance 17.5에 의해 7개의 Major Cluster와 1개의 Single Cluster로 나뉘어졌다. 이중 A, B, C 및 Cluster는 Leuconostoc속으로 분석되어졌고, F는 Lactobacillus속으로 분석되어졌다. 그리고 E와 G cluster는 두개의 Genus가 혼재되어 나타났으며 보충적인 연구가 필요하다. 앞으로 김치유래 젖산균의 균체지방산 분석결과를 기반으로 한 데이타베이스에 95가지 탄소원을 이용하는 수치분류학적 접근방법 및 Pyrolysis Mass Spectrometry 등의 화학적 분석 방법과 분자친화적 연구를 통한 종합적 분류정보 체계가 갖추어지면 젖산균의 신속, 정확한 동정 및 연구에 활발히 이용되어질 것이다. Two hundreds and thirty lactic acid bacteria, mostly isolated from Kimchi, including type strains were sued for analysis of cellular fatty acids. The 230 test strains were recoverd in 7 major and 1 single clusters defined a Euclidian distance of 17.5. These aggregate taxa were equivalent to the genus Leuconostoc (aggregate group A, B, C and D), and the genera Leuconostoc and Lactobacillus (aggregate group G). It is concluded as evident that FAMEs (Fatty Acid Methyl Esters) profile of cell can be used as a criterion in classification of lactic acid bacterial from kimchi. Additional comparative taxonomic studies need to be carried out on well chosen representative strains to determine the most appropriate methods of value.

지난 2년간의 학회지 "신경정신의학" 심사 평가보고

김찬형,김세주,김도관,김성곤,박원명,송동호,박용천,이영문,오강섭,정영철,이상열,김주한,이동영,이헌정,함병주,김율리,김문두,김정진,이강욱,천근아,김재진,홍진표,홍승철 大韓神經精神醫學會 2007 신경정신의학 Vol.46 No.6

교대로 운전되는 두 개의 UV/광촉매반응기로 구성된 폐가스 처리시스템에서의 광촉매의 비활성화 및 재생 특성

이은주 ( Eun Ju Lee ),정찬홍 ( Chan Hong Chung ),임광희 ( Kwang-hee Lim ) 한국화학공학회 2021 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.59 No.4

본 연구에서는 교대로 운전되는 두 개의 UV/광촉매 반응기로 구성된 폐가스 처리시스템의 운전단계와 단계별 광촉매의 비활성화의 상관관계를 사용된 광촉매에 대한 기기분석을 통하여 규명하였다. 선행연구[Lee와 Lim, Korean Chem. Eng. Research, 59(4), 574-583 (2021)]의 광촉매 반응기 시스템 운전에 사용되지 않은 광촉매를 담지한 다공성 SiO₂ 담체(A4), 1회 운전하는 동안 사용되고 재생을 경험하지 않은 광촉매를 담지한 다공성 SiO₂ 담체(A1), 2회 운전에 사용되고 1회 재생된 광촉매를 담지한 다공성 SiO₂ 담체(A2) 및 3회 운전에 사용되고 2회 재생된 광촉매를 담지한 다공성SiO₂ 담체(A3)와, 1차 재생(AD1) 또는 3차 재생(AD3)된 광촉매를 담지한 다공성 SiO₂ 담체에 대한 BET 분석, SEM, XPS, SEM-EDS 및 FTIR 분석 등을 수행하여, 광촉매를 담지한 다공성 SiO₂ 담체의 비활성화 및 재생 특성을 포함하는 특성 분석을 수행하였다. 그 결과로서, 3회 이상의 여러 번 재생을 수행하는 광촉매의 적정 재생 온도를 200℃ 미만으로 도출하였다. 이러한 광촉매의 적정 재생 온도는 BET 분석결과에서 도출된 기공에 흡착된 에탄올 산화분해 중간생성물의 대부분이 완전 분해가 되어 기공이 재생되는 재생 온도와 거의 일치하였다. 특히, XPS 분석 결과는, 선행 연구[Lee와 Lim, Korean Chem. Eng. Research, 59(4), 574-583 (2021)]에서 광촉매 반응기의 첫 번째 운전 후에 광촉매의 미세한 비활성화가 발생하였음을 나타내었다. 또한, XPS 분석 결과는, 선행연구[Lee와 Lim, Korean Chem. Eng. Research, 59(4), 574-583 (2021)]에서 광촉매 반응기의 두 번째 운전에서 비교적 큰 광촉매의 비활성화가 발생하여 첫번째 운전성능보다 약 5%만큼 못 미치는 에탄올과 황화수소 각각의 제거효율을 초래하였으나, 세 번째 운전에서의 에탄올과 황화수소의 제거효율은 두 번째 운전에서의 에탄올과 황화수소의 제거효율 실험 결과와 거의 비슷하였다는 연구 결과와 일치하였다. 한편, AD3를 사용하여 선행연구[Lee와 Lim, Korean Chem. Eng. Research, 59(4), 574-583 (2021)]에서와 같은 광촉매 반응기의 네 번째 운전을 수행할 것을 가정하면, 두 번째 운전에서보다 더 큰 광촉매의 비가역적 비활성화의 발생으로 인하여 에탄올과 황화수소 제거효율이 가장 크게 저하되리라 예상되었다. In this study, the correlation between operating stages of waste air-treating system composed of two alternatively-operating UV/photocatalytic reactors, and the deactivation of photocatalyst used in each operating stage, was investigated by instrumental analysis thereon. The repeated deactivation and subsequent re-generation of photocatalyst used in the waste air treating system of previous investigation performed by Lee and Lim (Korean Chem. Eng. Research, 59(4), 574-583(2021)), were characterized on virgin photocatalyst-carrying porous SiO₂ media (A4), used photocatalystcarrying porous SiO₂ media (A1, A2 and A3) collected from the corresponding photocatalytic reactor upon 1^st, 2^nd, and 3^rd run, respectively, regenerated photocatalyst-carrying porous SiO₂ media upon 1 time-run (AD1) and 3 times regenerated photocatalyst-carrying porous SiO₂ media upon 3 time-runs (AD3) by instrumental analysis including BET analysis, SEM, XPS, SEM-EDS and FT-IR. As a result, the proper regeneration-temperature for deactivated photocatalyst to be regenerated several times (more than 3 times), was suggested below 200℃. Such temperature of deactivated photocatalystregeneration was almost consistent to the one, according to BET analysis, at which tiny nano-pores blocked by adsorbed ethanol-oxidative and degraded intermediates (AEODI), were regenerated to be reopened through almost complete mineralization of AEODI. In particular, the results of XPS analysis indicated an incurrence of insignificant deactivation of photocatalysis upon 1^st run of UV/photocatalytic reactor (A or C) of the previous investigation. In addition, the results of XPS analysis were consistent with the experimental results of the previous investigation in that 1) deactivation of photocatalyst incurred during 2^nd run of the UV/photocatalytic reactor (A or C) resulted in decreased removal efficiency, by ca. 5% and 5%, of ethanol and hydrogen sulfide, respectively, compared with its 1^st run; 2) there was insignificant difference between the removal efficiencies of its 2^nd run and 3^rd run. Furthermore, the removal efficiencies of ethanol and hydrogen sulfide for hypothetical 4^th run of photocatalytic reactor in the previous investigation, using AD3, were expected to decrease, compared with its 3^rd run, by much more than those for 2^nd run in the previous investigation did, compared with its 1^st run.

자동차용 실리콘 가속도센서의 개발(Ⅱ)

이종현,신장규,이상룡,천희곤,조찬섭,심준환,류인식,박석홍,허정준,박기열 경북대학교 센서기술연구소 1994 연차보고서 Vol.1994 No.-

자동차의 air-bag 장치에 실용될 수 있는 압저항형 단결정 실리콘 가속도센서 칩을 개발하기 위하여 결정 실리콘 미세구조의 제조방법을 확립하고, 단위공정의 검증을 통하여 일괄공정에 의한 PROTO-TYPE 칩을 만드는 기술을 연구하였다. 단결정 실리콘 미세구조는 선택확산법을 이용하여 정확히 선택된 영역에만 air-gap을 형성하여 미세구조의 측면식각을 방지하는 선택확산법에 의한 실리콘 마이크로머시닝 기술로 제조하였다. 일괄공정을 위한 단위공정확립을 위하여 PROTY-TYPE 8빔 브릿지형 가속도 센서를 제조하였다. 제조된 칩의 가속도에 따른 출력전압은 선형성을 나타내고 있으며, 감도는 약 50 ㎶/V·g로 나타났다. 이 감도는 50G용 가속도센서의 사양을 만족하지 못했다. 이는 공정에 의한 문제라기 보다는 가속도센서의 시뮬레이션에 의해 설계한 구조가 이미 원하는 감도에 못 미친다는 것으로 생각된다. 따라서 2차 공정으로 제조될 가속도센서의 파라미터를 SuperSAP 유한요소 패키지를 이용하여 실리콘 미세구조부의 파라미터에 따른 특성을 시뮬레이션하였다. 설계된 50G용 가속도센서의 mass Pad의 반경 및 빔 길이, 빔 폭, 빔 두께, 그리고 mass의 각 파라미터 값은 700 ㎛, 120 ㎛, 5 ㎛, 1.0 ㎎ 이었다. 반도체 공정기술, 관성질량 제조법 및 선택확산을 이용한 마이크로머시닝을 사용하여 일괄공정으로 8빔 브린지형 가속도센서를 제조하였다. We researched the establishment of the silicon microstructure fabrication technique to develop a piezoresistive type silicon acceleration sensor chip and the technique to make a proto-type chip by the verification of the unit-process. Silicon microstructure is fabricated silicon micro-machining by selective diffusion method. This method prevent a side-etching of microstructure because selective diffused region is only formed an air-gap. We fabricated a proto-type 8-beam bridge-type acceleration sensor to establish the unit-process for the batch-process. The output voltage of the chip represented linearity with acceleration, and the sensitivity was about 50 ㎶/V·g. But this sensitivity dosen't satisfy the requirements of a practical acceleration sensor. The cause of this result is assumed not process problem, but the structure designed by simulation isn't suitable already. Threfore, the characteristics of parameters of the acceleration sensor that will be fabricated by 2nd-process is simulated by SuperSAP finite-element package. The determined parameter values of beam length, beam width, beam thickness, mass, and mass radius are 120 ㎛, 5 ㎛, 1.0 ㎎, and 700 ㎛, respectively. We fabricated 8-beam bridge-type acceleration sensor by batch-process using a semiconductor process technique, proof-mass fabrication method, and micromachinig using selective diffusion.

대학입시 스트레스가 고등학생의 자아정체감발달에 미치는 영향

이영문,김찬영,이만홍 大韓神經精神醫學會 1990 신경정신의학 Vol.29 No.4

In order to find out the correlation between the level of ego identify and the level of entrance examination stress, authors studied 457 samples of high school students of both sex from 4 different areas of Seoul. The results were as follows. 1) The level of entrance examination stress were greater in 3rd grades than in 1st grades and also in girls compared to boys. 2) There were no difference in the mean score of Dignan's ego identity scale between difference sex or grades. 3) Statistically, there was significant negative correlation between level of ego identity and stress of entrance examination.(Pearson's correlation coefficient was-0.4484) 4) Subjects with higher level of entrance examination stress showed lower level of ego identity development. 5) Subjects who developed the same physical or psychiatric symptoms during last 6 months showed lower level of ego identity compared to those who didn't.

벡터제어를 이용한 표면형 영구자석 동기전동기의 최대효율제어

이진,김의선,홍형표,최찬학 木浦大學校 工業技術硏究所 1992 工業技術硏究誌 Vol.2 No.-

In general, surface type permenent magent synchronous motor is controlled by the i_d=0 control method for producing maximum torque per ampere below the rated speed. And it is controlled by the field-weakening control method in order to expand the operating speed limits. However, these control methods do not consider the efficiency. So it is required to minimize the loss. This paper proposes a maximum efficiency control algorithm for surface type permanent magnet synchronous motors. The proposed maximum efficiency algorithm is derived from minimizing the core loss and copper loss. In this method the optimum d-axis current is supplied by the vector controller which solves the maximum efficiency control algorithm. From the computer simulation and experimental results. the improvement of the efficiency with the proposed control system was confirmed.

석탄폐석의 흡착능 및 흡착제로의 활용방안에 관한 기초연구

한동준,임재명,이찬기,이해승 江原大學校 附設 環境硏究所 1998 環境硏究 Vol.15 No.-

본 연구에서는 산과 계곡에 폐기물로 방치되어 있는 석탄폐석의 재활용 및 자원화의 측면에서 수처리에이용될수 있는 흡착제의 개발을 위한 기초실험을 수행되었다. 석탄폐석으로는 굴진폐석과 선탄폐석이 이용되었으며, 석탄폐석 자체가 지니고 있는 흡착능 실험과 열처리로 인한 흡착능 개선 여부를 검토하였다. 처리대상물질은 중금속, 색도,그리고 COD들을 선정하였다. 실험조건은 회분식과 컬럼식으로 구분하여 각각 이루어 졌으며 실험결과 다음과 같은 결론을 얻을수 있었다. This research aims to remove heavy metals. nonbiodegradable COD(NBDCOD), and color using the coal waste. The experimental by heat treatment was performed to advance the adsorption capacity. The results are as follows ; i) The coal waste had the adsorption capacity of heavy metals and th rates were in the range of 20 to 30 percents. ii)The heat treatment was the optimum condition that the reaction time was 6 hours at 500℃. iii) In the column experimen non-treated coal waste remoned the COD and color in the range of 20 to 60 percents. iv)Heat-treated coal waste showed higher removal rate of the color in biological efflunt, and heavy metal and COD removal rates were changed by the filteration rates.

철강용 알칼리탈지제의 제조와 그의 특성화

이찬우,편무실,공유식,박홍수 明知大學校 産業技術硏究所 1993 産業技術硏究所論文集 Vol.12 No.-

Alkaline degreasing agent(ADA) was prepared by blending of POE(6)-2-ethylhexyl ether(PEH-6). Tetronix T-701(T-701). Na2CO3, tetrasodium pyrophosphate(TSPP). Demol N, and MJU-100A. The physical properties of ADA tested with steel specimen showed the following results. The degreasing powers of ADA-6(PEH-6 20g/Na2CO3 40g/TSPP 20g/Demol N 5g/MJU-100A 5g/water 100g mixture) for press-rust preventing oil were 97% and 98% degreasing at 4wt%, 70℃ and 90℃respectively: for quenching oil, the degreasing power of ADA-6 was 94% degreasing at 4wt% and 70℃. From these results, it was confirmed that ADA-6 exhibited a good degreasing power. Foam heights measured immediately after foaming by Rose & Miles method and Ross & Clark method at 6wt%, 60℃ were 20mm and 50mm. respectively. As the result, ADA-6 was proved a good low foaming degreasing agent.

수종의 엔진구동형 Nickel-Titanium file을 이용한 근관형성 방법이 근관만곡도 유지능력에 미치는 영향

이철환,조경모,홍찬의 大韓齒科保存學會 2003 Restorative Dentistry & Endodontics Vol.28 No.1

There are increasing usage of Nickel-Titanium rotary files in modern clinical endodontic treatment because it is effective and fater than hand filing due to reduced step. This study was conducted to evaluate the effect of canal preparations using 3 different rotary Nickel-Titanium files that has different cross sectional shape and taper on the maintenance of canal curvature. Simulated resin block were instrumented with Profile(Dentsply, USA), GT rotary files(Dentsply, USA), Hero 642(Micro-Mega, France), and Pro-Taper(Dentsply, USA). The image of Pre-instrumentation and Post-instrumentation were acquired using digital camera and overspreaded in the computer. Then the total differences of canal diameter, deviation at the outer portion of curvature, deviation at the inner portion of curvature, movement of center of the canal and the centering ratio at the pre-determined level from the apex were measured. Results were statistically analyzed by means of ANOVA, followed by Scheffe test at a significance level of 0.05. The results were as follows; 1. Deviation at the outer portion of curvature, deviation at the inner portion of curvature were showed largest in Pro-Taper, so also did in the total differences of canal diameter(p<0.05). 2. All the groups showed movements of center. Profile combined with GT rotary files and Hero 642 has no difference but Pro-Taper showed the most deviation(p<0.05). 3. At the 1, 2, 3mm level from the apex movements of center directed toward the outer portion of curvature, but in 4, 5 mm level directed toward the inner portion of curvature(p<0.05). As a results of this study, it could be concluded that combined use of other Nickel-Titanium rotary files is strongly recommended when use Pro-Taper file because it could be remove too much canal structure and also made more deviation of canal curvature than others.