집적도가 향상된 가스센서 어레이 열해석

임준우,정완영,이덕동 경북대학교 센서기술연구소 2002 센서技術學術大會論文集 Vol.13 No.1

용융슬래그로부터 합성된 제올라이트 이용한 해수 중의 N, P 제거

임준혁,정진영,이성우,홍성호,김경희,이제근 한국공업화학회 2003 응용화학 Vol.7 No.1

This study examined, as the one way of using zeolite, the about the removal of ammonia nitrogen and phosphorus that cause the eutrophication occurred the adjoining seas.4A type zeolite was used as an adsorbent to remve NH_4-N, PO_4^3-P ion in the artificial seawater. Zeolite is more required than in the fiesh water, under the same conditions, in order to remove NH_4-N in the sea water. The lower the thickness of NH_4-N is in the early stage, the more Freundlich type equation the value of 1./n increases. In case of PO_4^3-P indicated that the removal efficiency was relatively independent of PO_4^3-P concentration. Freundlich parameter 1/n has the value nuder 2. So it shows that absorption is made with relatively ease.

Tocopherol 投與가 家兎의 增體 및 飼料利用性에 미치는 影響

林鍾佑,尹昌鉉,河正基,朴琦緖 진주농과대학 1970 진주농과대학 연구논문집 Vol.- No.9

本 試驗은 Tocopherol이 家兎의 增體 및 飼料利用性에 미치는 影響을 究明하기 위해 雌兎 20頭, 雄兎20頭 計 40頭를 8週間 試驗하였던바 다음과 같은 結果를 얻었다. 1. 日當 增體量에 있어서는 處理區間에 1% 水準의 有意性이 認定되었으며 T₂區가 14.68g, T₁區가 13.17g로서 對照區보다 優秀하였으나 T₃區는 對照區보다 좋지 않았다. 2. 飼料攝取量에 있어서는 處理區間과 性別間에 1%水準의 高度의 有意性이 認定되었고 T₂區, T₁區가 對照區보다 飼料攝取量이 많았으나 T₃區는 對照區보다 不良했다. 3. 飼料利用率에 있어서는 處理區에 있어서 別다른 差가 認定되지 않았다. This experiment was conducted to study the effects of Tocopherol on gain weight, feed consumption and feed conversion of growing rabbits. Twenty male and twenty female rabbits of Japanese white breed used for 8 weeks. The results obtained from this study may be summarized as follows: 1. There was found a highly significant difference(P<0.01) for daily gain weight between treatments. T₂lot with 14.68g and T₂lot with 13.17g had higher daily gain weight than its of control lot. But T₃lot had lower daily gain weight than its of control lot. 2. In feed consumption there were highly significant differences (P<0.01) between treatments and sex. T₂lot and T₁lot had more feed intake than its of control lot. But T₃lot had lower feed intake than its of control lot. 3. The difference in feed conversion was found insignificant between treatments.

혈액 투석 환자에서 중심정맥 협착에 대한 스텐트 삽입술 : Wallstent Placement

임대승,노상필,이유선,정승현,김보영,이정우,강정아,김정희,이민수,정준용,최시완,정진옥,성인환,이강욱,신영태 충남대학교 의과대학 의학연구소 2002 충남의대잡지 Vol.29 No.1

Stenosis of central vein is a common complication arising after percutaneous subclavian vein catheter insertion performed for temporary vascular access in chronic renal failure patients undergoing hemodialysis. There are several treatment methods for the condition like percutaneous angioplasty(PTA), stent insertion, and surgery, but recent trend is toward PTA and stents. Among the patients diagnosed with chronic renal failure from March 1993 to May 2002 and undergoing hemodialysis through AV fistula, the 14 Patients in whom central vein stenosis arose were selected for the study. A total of 28 percutaneous interventions(5 PTA and 23 stent placement) were performed, and restenosis rate and the time taken till the restenosis in de novo lesions and instant lesions were compared. All 28 cases were operated successfully. The 14 cases that received both anigioplasty and stent placement initially. (de novo lesion : 14 cases), Among the 10 cases with de novo lesion that followed up more than 1 year, 3 cases are currently undergoing hemodialysis without restenosis, and the remaining 7 cases have recurred stenosis with the mean time to restenosis of 10.9 months. In the 7 cases in whom stenosis recurred, 11 interventions were done(instent lesion: 11 cases). 4 of these were using only ballon angioplasty with 100% restenosis rate and the mean time of 3 months until restenosis. The remaining 7 cases were using both balloon angioplasty and stent placement, also with 100% restenosis rate but with the mean time of 12 months until restenosis, which was later than the group receiving only balloon angioplasty. In treating the patients with central vein stenosis, stent placement seems to be more advantageous over PTA in terms of restenosis rate and the mean duration of patency. In the case of instent lesion, inserting the stent for the second time after stenosis recurred lengthened the duration of patency compared to performing balloon angioplasty alone.

축우 부루셀라병의 ELISA 진단법에 관한 연구

임윤규,이두식,박전홍,양기천,김승호,김공식,현관종,김우택,이영순 濟州大學校 農科大學 動物科學硏究所 1993 動物科學論叢 Vol.8 No.1

Enzyme-linked Immuno sorbent Assay (ELISA) for the serological diagnosis oi Bruceiia abortus was developed and compared with plate aggluhnation test Cell wall antigen was extracted from Brucella abortus 1119-3 by sonicabon and with a sodium deoxychlate solution Optimum protein concentra tion of coating antigen 0.4㎍/100㎕ protein on each microtiter plate well. Horse radish peroxidase(HRP) labled protein-G was used as a tracer of reacted antibodies ELISA confirmed the agreeable results of 40 rases out of 43 cases by plate aggulutination test ELISA diagnosed positive cases (10 out of 12) and negatiw cases (1 out of 12) with dubious sera by plate agglutination test From this results EL ISA could be used for the early diagnostic tools of Brucellosis in cattle.

다발성 대장암 간전이 환자의 간절제를 위한 새로운 시도

주종우,김형철,임철완,신응진,조규석,유기원,송옥평,홍대식,박성진,조준희,이혜경,김희경,권계원,고은석 순천향의학연구소;Soonchunhyang Medical Research Institute 2004 Journal of Soonchunhyang Medical Science Vol.10 No.2

Multiple bilobar liver matastases (MBLM) are the main cause of low resectability in the colon cancer liver metastases. The authors experienced one case of initially non-resectable colon cancer liver metastases. He was curatively and safely treated with a two-stage hepatectomy using the new method of future remnant liver volume growing. A 54-year-old man was referred to our department with the sigmoid colon cancer combined with MBLM, which were checked in two small metastatic lesions in the left lobe and five large sized lesions in the right lobe in the computed tomogram (CT). A laparoscopic assisted anterior resection was primarily performed. We performed the 1^(st) stage hepatectomy 3 weeks after the colon resection. Intra-operative Ultrasonogram (US) found 9 small superficial metastatic lesions in the left lobe. All that lesions were completely removed by non-anatomical wedge resection. An occlusion ballon catheter was placed in the right portal vein through a small branch of the inferior mesenteric vein at that time. The future remnant liver volume was sufficiently increased 3 weeks after the 1^(st) hepatectomy. A right hepatectomy was safely performed 22 days after the 1^(st) hepatectomy. The patient received a regional chemotherapy (interleukin2 based immuno-chemotherapy through hepatic artery) for 4 months, then received 9 cycles of systemic chemotherapy (biweekly Oxaliplation, leucovorin, plus 5-fluorouracil) without any recurrence evidence.

과량의 인슐린 투여로 인한 인위성 저혈당증 1예

김준우,안철우,남주영,김똘미,김영균,추적금,박종숙,박진아,조승현,김동연,김도연,윤수지,이경열,차봉수,김경래,임승길,이현철,허갑범 대한당뇨병학회 2002 임상당뇨병 Vol.3 No.2

본 저자들은 인위적인 인슐린 투여로 인한 인간성 저혈당증 1예에서 보존적인 치료로 의식기능은 회복하였으나, 현저한 인지능력 저하를 하였기에 문헌고찰과 함께 보고하는 바이다. Factitious hypoglycemia is a covert attempt to lower the blood glucose concentration with insulin or a sulfonylurea agent. This attempt is mainly performed by the patients themselves. In a large series of diabetics who had overdosed on drug, less than 5% had used insulin for suicidal or homicidal purposes. Additionally, 4 of 204 hypoglycemic episodes were due to a suicide attempt with insulin. The onset of insulin action, its peak level, and duration, and the degree of hypoglycemia, are determined by insulin's pharmacokinetics. However, the final outcomes are not associated with the amount of insulin used. The complications related to insulin overdose are cerebral damage and hypokalemia. Other complications include, pulmonary edema attributed to congestive heart failure and hypertensive crisis, as well as respiratory insufficiency. We report this case with a review of the literature.

저전력형 부탄가스 감지소자의 제조 및 그 특성

장경훈,임준우,강봉휘,이덕동 경북대학교 센서기술연구소 1995 센서技術學術大會論文集 Vol.6 No.1

Low power consuming butane gas sensors were fabricated using mica substrate which is a thin and elastic insulator. To increase the sensitivity and the stability, various catalyst layers were formed on SnO_(2) thin layer. Among them, SnO_(2) /Pt(17Å)/Pd(30Å) and SnO_(2) /Pt(8Å )/Pd(30Å) thin layer showed good characteristics in stability and dependance of temperature and humidity. The size of fabricated sensors was 1 x 3 mm^(2) and the consumed power was lower than 100 mW at operating temperature(250℃). For 2000 ppm butane concentration, the response time and the recovery time were about 5 seconds and 15 seconds respectively. The sensitivity of the sensors was about 80 % for 5000 ppm butane concentration.

마이크로 가스센서의 열해석

정완영,이상윤,임준우,이덕동 경북대학교 센서기술연구소 1998 센서技術學術大會論文集 Vol.9 No.1

Thermal analyses for typical stack-type and newly proposed planar-type micro-gas sensors were accomplished. The thermal analyses for the proposed planar structure including temperature distribution over the sensing layer and power consumption of the heater were carried by finite element method and well compared with those of typical stack-type micro-gas sensor. The thermal properties of the microsensor from thermal simulation were tested to investigate the applicability of the heater to a real device.

실리콘의 TMAH 식각을 사용한 Suspended-type 마이크로 가스센서의 제조

김현호,이상문,임준우,강봉휘,정완영,이덕동 경북대학교 센서기술연구소 1998 센서技術學術大會論文集 Vol.9 No.1

In recent years, different types of microfabricated 'suspended-type' structure have been used as freestanding membranes for a variety of micro gas sensors. We examined the silicon etching characteristics of tetramethyl ammonium hydroxide(TMAH). A suspended type micro gas sensor with platinum heater, sensing electrode and temperature sensor using TMAH etching of silicon was fabricated on silicon nitride(1,500Å)/ silicon dioxide (3,000Å)/ silicon nitride(1,500Å) dielectric membrane. It has low thermal conductivity and balanced stress with silicon substrate for the purpose of improving the thermal isolation between heater and silicon substrate. To avoid any chemical or physical damages to gas sensing material during the photolithography or shadow mask process, the tin dioxide film was deposited onto whole surface of device by using maskless electron beam(e-beam) evaporation technology. The power consumption of the fabricated device was about 40mW at the operating temperature of 250°C. In case of adding Pt(2wt.%) or Pd(2wt.%) catalyst, the sensitivity to CO was higher and the sensitivity to C_(4)H_(10) was higher than those to other gases, respectively.