http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김민지,신수영,송월섭,조수진,최동락,황미진,황진규,박진현,김경,Dennis W. Fell 대구대학교 특수교육재활과학연구소 2011 再活科學硏究 Vol.29 No.1
이 연구는 트레드밀 운동과 키네시오 테이핑의 효과에 따른 폐활량의 변화를 알아보기 위해 26명의 비흡연자가 참가하였으며 키네시오 테이핑을 적용하지 않은 그룹과 키네시오 테이핑을 적용한 두 그룹으로 무작위로 배정하고 각 군들을 주 3회 6주간의 트레드밀 훈련을 실시하였다. 실험 전과 후, 스파이로미터를 사용하여 키네시오 테이핑의 적용 따른 폐활량 변화 효과를 측정하였다. 이 연구의 결과를 종합해보면 키네시오 테이핑을 적용 그룹에서 적용하지 않은 그룹에 비해 FVC, FEV1에서 유의한 증가를 보였다. 이러한 결과는 건강한 성인에서 키네시오 테이핑을 적용한 경우 키네시오 테이핑을 적용하지 않고 트레드밀 운동을 한 경우보다 폐활량의 향상에 효과적이라고 생각되어진다. The purpose of this study was to investigate the variation of vital capacity(VC) according to the effects of kinesio taping with treadmill exercise. Twenty-six non-smokers were participated in this research and these subjects were randomly assigned into two groups. To measure the VC variation effects of kinesio taping, spirometer was used. The collected data were analyzed statistically by using a paired Mauchly test and repeated measure ANOVA. The results of this study were as follows; A group: treadmill with kinesio taping B group: treadmill without kinesio taping. Between A and B, there were significant differences. In the case of A group, there was 11.66% increase of VC, during 3 weeks experiment(p<.01). In the case of B group, there were significant differences, 3.35% increase of VC, during 3 weeks taping intervention(p<.01). After 6 weeks experiment, the improvement of VC shown a significant difference with intergroup (p<.05). From this result, it was revealed that treadmill exercise with kinesio taping was effective to improve VC to healthy adult than treadmill exercise without kinesio taping.
김정일,김병권,김정원,채창호,이철호,강동묵,김지홍,김진하,김영욱,이영하,이지호,김정호,윤형렬,유철인,정백근,장태원,김운규,윤동영,강진욱,김종은,안진홍,이동준,장준호,이광영,송혜란,최영희,이용환,조병만,최홍렬,고상백,김은아,이유진,홍영습,정갑열,김정만,김준연 大韓産業醫學會 2004 대한직업환경의학회지 Vol.16 No.1
Objective: Occupational medicine specialists in the Busan, Ulsan and Kyung-Nam areas established an area-based occupational disease surveillance system and used this system to collected case information for the purpose of preventing occupational diseases Methods: l l hospital participated in this system. The authors selected five main diseases, which were hand-arm vibration syndrome (HAVS), work-related musculoskeletal disorder (WRMSD), occupational asthma, occupational skin disease and occupational and occupational lung cancer and established their case definitions. All cases were reported on the web, and real time analysis was conducted. Results: Between April 2001 and April 2003, 192 cases of HAVS, 118 cases of WRMSD, 33 cases of occupational asthma, 17 cases of occupational skin disease and 17 cases of occupational lung cancer (for a total of 377 cases of these five main diseases) were reported. most of the HAVS cases came from shipbuilding, and 172 of them (92.7%) were associated with grinding. Of the four main types of WRMSD, carpal tunnel syndrome (CTS) was the most prevalent with 46 cases and shipbuilding was also the main industry involved (83.9%). The ergonomic risk factors involved mainly associated with the hand. In 19 (57.6%) and 4 (12.1%) cases of occupational asthma, the agents involved. The causative agents of occupational lung cancer included Cr, welding fume, PAH, Ni, etc. 10(58.8%) of the cases were diagnosed as squamous cell carcinoma and 5(29.4%) as adenoma. Conclusion: This result showed that an area-based occupational disease surveillance system might provide an effective method of evaluating the prevalence of such diseases, however the Busan, Ulsan and Kyung-Nam provinces are too large to be treated as individual areas. Therefore, the authors suggest that each province should establish its own surveillance system.
신진우,조우승,조성빈,김재훈,정지은,사예지,백경동,박동규 순천향대학교 부설 산업기술연구소 2021 순천향 산업기술연구소논문집 Vol.27 No.2
As modern people's interest in health grows, wearable healthcare-related technologies that can collect biometric information and receive health-related services regardless of time and place are developing. This paper proposes the healthcare system based on voice recognition function. Unlike conventional wearable healthcare systems, the proposed system provides real-time telemedicine and diagnosis and the direct connection with doctors is possible through it. And almost all functions of the application in it are operated with voice commands to lower user access barriers. Because it deals with personal information including medical information, encryption algorithms have been applied between all data movements. Finally, the healthcare system proposed in this paper is expected to increase convenience in health care and reduce the medical gap.
김동열,김지수,김진일 東義大學校産業技術開發硏究所 2011 産業技術硏究誌 Vol.25 No.-
본 연구에서는 안드로이드 기반의 전자사전을 개발하는데 있어 증강현실(Augmented Reality)을 적용한 전자사전을 제안한다. 영어 문서를 문자인식을 통해 받아들여 별도의 검색을 위한 작업 소요시간 없이 찾고자 하는 단어를 간단한 터치로만 검색하고, 이를 증강현실을 통해서 사용자에게 감각적으로 전달하여 보다 효율적으로 영어단어를 이해할 수 있도록 구현하였다.
김동익,김덕경,허세호,이병붕,김용신,김은숙,문지영,도영수,신성욱,김동수,김만태,진재욱,김용신 대한혈관외과학회 2002 Vascular Specialist International Vol.18 No.1
As medical technology progresses rapidly, there is a rise in the average age along with the Korean dietary lifestyle becoming more westernized, which leads to an increase in the number of vascular disease patients in Korea. Thus, we need to manage the medical information of a disease systematically in order to diagnose and treat constructively. However, since there has been no standardized method of man agement to date, a great deal of information could not be properly utilized nor studied. Therefore, the departments of Cardiology, Radiology and Neurology of Samsung Seoul Hospital recently got together to develop an information management system called the Vascular Data System. This program was developed to be run on win98 O/S, upper Pentium Ⅲ, and upper 128 MB Memory, and its source code is Dephi 4.0. It was configured for the user to set the configurations as well as do a variety of search and analysis. If this program were to be updated continuously, it may be used extensively as well as in various parts of clinical research activities.
상지 단순반복작업 근로자의 수근관 증후군 유병률에 관한 조사
손지언,장태원,김윤규,홍영습,정갑열,김동일,이강진,하남진,김상범,김준연 대한산업의학회 2001 대한직업환경의학회지 Vol.13 No.3
목적 : 본 연구는 수근관 증후군의 발생위험이 높은 작업형태에 종사하는 상지 단순반복작업근로자로서 육류 및 어류 가공 사업장과 목재소 근로자에서 근전도검사를 이용하여 수근관 증후군의 유병률을 조사하고자 하였다. 방법 : 상지 단순반복작업근로자로서 육류 및 어류 가공 사업장 근로자 69명과 목재소 근로자 17명을 실험군으로, 관리직, 경리, 경비등 상지의 단순반복작업이 없는 근로자 28명을 대조군으로 선정하여, 작업적 및 병력조사, 이학적 검사와 근전도검사를 통해 수근관 증후군의 유병률을 조사하였다. 결과 : 수근관 증후군의 유병률은 육류 및 어류 가공 사업장과 목재소에서 각각 26.09 % (18명)와 29.41 %(5명)로 조사되었으며, 육류 및 어류가공사업장과 목재소 근로자를 '7년 이상과 미만의 작업기간'으로 층화하여 비교한 결과 '상지부위의 통증 호소 유무', 'Visual Analogue Scale(VAS: 총 10점) 4점 이상 여부', 'Tinel teat 양성 유무', 'Phalen test 양성 유무'는 모두 단기 작업근로자군에서 양성의 빈도가 증가되었고 '수근관 증후군 유무'는 장기작업근로자군에서 양성의 빈도가 증가되었다. 결론 : 육류 및 어류 가공 사업장과 목재소의 수근관 증후군 유병률은 각각 26.09 %와 29.41 %로 육류 및 어류 가공 사업장과 목재소는 1996년 OSHA가 지정한 바와 같이 위험한 작업요인이 있는 작업장으로 분류하여 관리되어야 할 것으로 생각된다. Objectives : This study was carried out to survey on the prevalence of Carpal Tunnel Syndrome(CTS) in high risk jobs(meat and fish processing plant and wood plant), by application of Nerve Conduction Study(NCS), a confirmatory diagnostic method. Methods : Experimental group was 69 workers sampled from meat and fish processing plants and 17 workers sampled from wood plants, who were simple, repetitive workers using upper extremities and control group was 28 workers sampled from managers, secretaries and keepers. All employees were examined through work history, physical examination and NCS. Results : 18 workers(26.09%) in meat and fish processing plants, and 5 workers(29.41%) in wood plants had compatible findings to NIOSH diagnostic criteria for CTS. The experimental group had more symptoms (complaint of upper extremities, Visual Analogue Scale ≥4(VAS: total 10 point)), signs(Tinel and Phalen test) and prevalence of CTS than control group(p<0.05). The prevalence of symptoms and signs were higher in short term workers(<7 years), but the prevalence of CTS was higher in long term workers(≥7 years). Conclusions : The prevalence of CTS in meat and fish processing plant and wood plant were 26.09% and 29.41% respectively. Authors propose that meat and fish processing and wood plants should be managed as a risk job category which were designated by OSHA in 1996