한국 정신장애의 역학 조사 연구[I] : 각 정신장애의 유병률

조맹제,함봉진,김장규,박강규,정은기,서동우,김선욱,조성진,이준영,홍진표,최용성,박종익,이동우,이기철,배재남,신정호,정인원,박종한,배안,이충경 大韓神經精神醫學會 2004 신경정신의학 Vol.43 No.4

Objectives : This study aims to estimate the prevalence of the DSM-IV psychiatric disorders in Korean population using the Korean version of Composite International Diagnostic Interview (K-CIDI). Methods : Subjects were selected by taking multi-stage, cluster samples of 7,867 adult household residents, 18 to 64 years of age, in ten catchment areas. Total 78 trained interviewers administered the K-CIDI to the selected respondents, from June 1 to November30,2001. Results : Total 6,275 respondents completed the interview. Some 33.5% of respondents reported at least one lifetime disorder, 20.6% reported at least one-year disorder, and 16.7% reported at least one-month disorder. The most common lifetime disorders were alcohol abuse/dependence (17.24%), nicotine dependence/withdrawal (11.19%), specific phobia (5.16%), and major de-pressive disorder (4.25%). The lifetime prevalence of substance abuse/dependence (0.25%) and schizophrenia (0.16%) was very low. Nicotine and alcohol use disorder showed very high male/female ratio. Mood disorder and anxiety disorder were more prevalent among female than male. Conclusion : The prevalence of psychiatric disorders was high. In comparison with other studies, remarkable differences in distributions of psychiatric disorders across the areas and times were observed.

고압 커패시터의 고장 분석을 통한 신뢰도 예측

양석준,김진우,신승우,이희진,신승훈,유동수,장석원 한국비파괴검사학회 2001 한국비파괴검사학회지 Vol.21 No.6

본 논문은 고압 커패시터의 고장분석과 신뢰성 예측 결과를 다루고 있다. 부품의 수명과 고장률을 예측하기 위해서 두 가지 방법으로 고장 모드와 고장 메커니즘을 연구하였다. 에폭시 수지로 성형된 고압 커패시터가 절연내압 시험 하에서 저항이 제로로 되는 고장에 대하여, 근본원인 고장분석 체계를 효과적으로 수립함으로써 고장 메커니즘의 원인을 분석하였다. 특히 세라믹-에폭시 계면에서의 절연파괴 고장 현상이 강조되었으며, 본 연구에서 얻어진 결과의 타당성은 마그네트론에 장착된 고압 커패시터의 열사이클 시험 수행에 의한 가속시험 결과로부터 입증되었다. 시험 결과들은 결함이 있는 로트를 신속히 규명하고 B10수명을 결정하는데 유용하게 사용할 수 있다. 또한, 유전체의 절연파괴에 대해서 부하-강도 간섭모델을 이용하여 고장률을 예측하였다. This paper presents a result of failure analysis and reliability evaluation for high voltage ceramic capacitors. The failure modes and failure mechanisms were studied in two ways in order to estimate component life and failure rate. The causes of failure mechanisms for zero resistance phenomena under withstanding voltage test in high voltage ceramic capacitors molded by epoxy resin were studied y establishing an effective root cause failure analysis. Particular emphasis was placed on breakdown phenomena at the ceramic-epoxy interface. The validity of the results in this study was confirmed by the results of accelerated testing. Thermal cycling test for high voltage ceramic capacitor mounted on a magnetron were implemented. Delamination between ceramic and epoxy, which might cause electrical short in underlying circuitry, can occur during curing or thermal cycle. The results can be conveniently used to quickly identify defective lots, determine B10 life estimation each lot at the level of inspection, and detect major changes in the vendors processes. Also, thd condition for dielectric breakdown was investigated for the estimation of failure rate with load-strength interference model.

VHDL을 이용한 실시간 JPEG 인코더 설계

신인철,어진우,강호준 단국대학교 1997 論文集 Vol.31 No.-

Image compression techniques have been necessary to transfer and save a great amount of image data in an efficient way. Because the compression and decompression of image signal require the real time processing, various hardware implementation methods have been studied. In this paper we propose the algorithm which is parallel form of processing 2 dimensional 8*8 blocks simultaneously, so increase speeds. It outputs compressed bit sequences 8 clocks later for the input data synchronized to clocks. Proposed algorithm is designed using VHDL. Simulation and circuit synthesis has been performed by the Powerview CAD Tool on the SUN Sparc-10 workstation. Results shows that maximum operating frequency is up to 15㎒. The final schematic circuit and comparison of processing speed are shown.

고주파 가열에 따른 반응고 알루미늄합금의 미세조직 특성

신평우,이정환,이상용,노진호,이영선 國立 昌原大學校 産業技術硏究所 1997 産技硏論文集 Vol.11 No.-

Semi-solid forming is relatively new process for forming alloys in the semi-solid condition into near net produce. It relies on the behaviour of semi-solid slurrys in which the solid exists in the form of non-dendritic, spheroidal particles in a liquid matrix. Powder of the Al-20Si-5Fe-2Ni alloy was manufactured by spray forming and powder metallurgy, one of the rapid cooling method, and its microstructure became fine with several ㎛ size through the extrusion process. Spray forming and powder metallurgy are a rapid solidification process in which capable of producing materials consisted of very fine, uniform particles. Spray forming can be described as incorperating the advantages of powder metallurgy without disadvantages of degassing and consolidation. In this paper, the microstructural evolution of the P/M, S/F Al-20Si-5Fe-2Ni alloys and wrought Al 2024 alloys were investigated various heating conditions by high frequency induction heating system.

하악 매복 지치의 외과적 발거시 Methylprednisolone의 안면 부종 감소 효과에 대한 임상적 연구

신지훈,박진배,한지용,윤혜경,김우형,이희철 인제대학교 백병원 2002 仁濟醫學 Vol.23 No.4

Objective : The third molars, expecially mandibular wisdom teeth, are commonly obliquely impacted, and surgical procedure with odontomy and osteotomy is necessary for their extraction. The surgical extracion of impacted wisdom teeth occasionally in duces variable discomfort. Especially, postoperative swelling, pain and limitation of mouth opening determine the degree of discomfort. For the reduction of these complicaions, drug therapy(antihistamine, enzyme, steroid), cole pack and pressure technique have been studied. It is known that the steroids are the most effective. Methods and Meterial : We selected fifty patients in their twenties, who visited Department of Dentistry, Pusan Paik Hospital from March to August in 1998. All of 50 patients has no other medical problems. Total 50 patients were randomly divided to 30 of experimental group and 20 of control group. The experimental group had orally administration of methyprednisolone 5㎎ every 8 hours 2 times preoperatively and 7 times postoperatively. Five points were marked on the patients' face, and the distances between the points were measured just before operation and 48 hours after operation. Results : Methyprednisolone reduces swelling about 50% after surgical extraction of obliquely impacted mandibular third molars with osteotomy and odontomy. The difference in the amount of tissue edema between experimental and control group was significant(p<0.01). However, there was no significant difference according to the operation time. Conclusion : It seems that the use of methylprednisolone is effective to reduce postoperative swelling following surgical extraction of third molars.

구강악안면 외상환자의 조직손상의 양상 및 정도에 관한 임상적 연구

신효근,소병수,안태섭,진우성,윤철희 大韓顎顔面成形再建外科學會 1995 Maxillofacial Plastic Reconstructive Surgery Vol.17 No.3

This is a clinical and retropective study on th patients with oral and maxillofacial trauma. This study was based on a series of 917 patients were treated as in-patients, at Chon-buk National University Hospital, during the period of Jan., 1989 through Dec., 1993. The results obtained were as follows : 1. The ratio of men to women were 3.59 : 1 in oral and maxillofacial injuries, 3.92 : 1 in facial bone fractures, and 3.18 : 1 in soft tissue injuries. 2. The oral and maxillofacial injuries occurred most frequently in the third decade(32.2%), and fourth, second, fifth decade in orders. 3. The major etiologic factors were traffic accident(57.4%) and fall-down(17.1%), interpersonal accident(16.6%), and industrial accident were next in order of frequency. 4. The incidence of facial bone fracture was 72.1%, soft tissue injury 58.8%, and dental injury 40.5%. 5. The most common site of fracture were mandible(62.9%) and maxilla(19.9%), zygoma and zygomatic arch(18.7%), and nasal bone(4.7%) were next in order of frequency. 6. The most common type of soft tissue injury was laceration(51.0%). The lesion of soft tissue injuries were mostly 1 or 2 lesions and deep.

달맞이꽃(Oenothera odorata Jacquin) 뿌리에서 추출한 항균성분의 특성

신성진,권순경,이권행,성낙도,최우영 충남대학교 농업과학연구소 1994 농업과학연구 Vol.21 No.1

An antibacterial component was isolated from the roots of evening primrose (Oenothera odorata Jacquin). The component was purified by repeated preparative TLC of the chloroform-extract with solvent system of toluene(7): ethyl acetate(4) : formic acid(O.8). NMR spectrum indicated that it is a steroid compound containing radical(-C=C-C=0) and aromatic structures. Its antibacterial activity against strains of the genus Streptococcus was relatively high, the MIC value was 50 according to the Hoechst Manual-345, as compared with the other genera such as Staphylococcus and Escherichia.

분편 인플루엔자백신(split influenza vaccine)의 임상효과 및 면역원성에 관한 연구

우흥정,김동림,정희진,천병철,이주연,안정배,김지희,박찬,신영규,김우주,김민자,박승철 대한화학요법학회 1999 대한화학요법학회지 Vol.17 No.1

목적 : 아단위 인플루엔자 백신 접종 후 백신의 인플루엔자 예방효과, 인플루엔자 방어 항체형성, 인플루엔자 백신의 안전성을 조사하고자 하였다. 방법 : 총 571명을 대상으로 인플루엔자 백신 접종을 하였고, 이들 접종자에서 인플루엔자 양질환의 이환을 조사하여 인플루엔자 백신의 인플루엔자예방효과를 알아보았고, 백신의 접종 전 및 접종 4주 후 혈청에서 혈구응집억제물(Hemagglutination Inhibition : HAI) 항체 검사를 실시하여 백신의 방어항체생성을 조사하였고, 백신의 안전성을 알아보기 위해 백신접종 후 1주일 이내의 부작용을 조사하였다. 결과 :백신 접종군과 백신 비접종군에서 인플루엔자 양 질환의 이환을 조사한 결과 접종군 28.35%, 비접종군 35.88%으로 나왔으며, p 값이 0.001로 통계적으로 접종군에서 유의하게 낮았고, 인플루엔자 양 질환의 예방 효과는 20.97%를 보였다. 백신의 방어항체 형성의 평가를 위해 유럽의 인플루엔자 백신 허가 기준을 조사하였는데 B/Guangdong/5/94균주의 백신접종 후 항체가 40이상의 비율을 제외한 다른 기준은 모두 만족 시켰다. 부작용은 전체 조사자 521명중 149명(29%)으로 주로 접종 부위의 국소 부작용을 호소했고, 전신 부작용은 2% 내외였으며 특별히 심각한 부작용은 발견되지 않았다. 결론 : 분편 인플루엔자 백신은 인플루엔자양질환의 예방과 방어항체생성에 효과 있으며 안전한 것으로 사료된다. Background : The safety and effectiveness of influenza vaccine are well known in developed country. The influenza vaccination has been recommended as one of the tentative immunization schedule for indicated persons since 1997 in Korea. But there are still no available data about them, even though nearly 5 million doses of influenza vaccine were used in 1997-1998 season. So it is immediately needed to investigate the safety. efficacy and immunogenicity of influenza vaccine among Korean. Methods : We studied the clinical efficacy of influenza vaccine by monitoring Occurrence of influenza-like illness in influenza risk group(vaccination ; 300, non-vaccination; 215) from December in 1997 to March in 1998. We used the split quadrivalent influenza vaccine containing 15 microgram of hemagglutinin of A/Beijing/262/95(HlNl), A/Wuhan/359/95(H3N2), B/Mie/1/93 and B/Guangdong/5/94. Hemagglutination inhibition(HA1) antibody titers were determined before immunization and 1 months after vaccination And we evaluated adverse effect of influenza vaccination at 7 days after vaccination. Results : Influenza vaccination was associated with si@icant reductions in influenza-like spptoms(vaccination group; 28.35%, non-vaccination group, 35.88%, p=0.001). The preventive effect of influenza-like i3lne.s among influenza risk goup was 20.97%. And immunogenicity of influenza A and B exceeded all of the European licensure criteria for immunogenicity except postvaccination proportion of titers 240 of B/Guangdong/5/94 strain. And the adverse effects were mainly local injection site problem and no serious adverse effect was noted. Conclusion : Split influenza vaccine is safe, inmunogenic and eff'tive in influenza risk group in Korea.

모션 인식 기반 스마트 미러

김경진,백경동,신진우,박동규 순천향대학교 부설 산업기술연구소 2021 순천향 산업기술연구소논문집 Vol.27 No.1

The Internet of Things, the core of the Fourth Industrial Revolution, is growing by applying various technologies to various fields. Among them, smart home systems that apply IoT technology to home environments are actively being researched, and the home hub market, which is a communication medium for smart homes, is also developing at the same time. However, the security damage from cyber attacks, which are vulnerabilities in IoT technology, is also increasing in proportion to these developments. In this paper, mirror is implemented as an IoT service hub. It can be used in any space where a mirror is installed, and gesture recognition allows control of existing infrared-based devices as well as certain compatible devices. In addition, the system to solve security problems was implemented by applying AES algorithms between all data communications.

矢狀分割骨切斷術에 依한 顎矯正術의 統計學的 硏究

辛曉根,陳宇政,李俊禮,金晤煥,李炫尙 大韓顎顔面成形再建外科學會 1997 Maxillofacial Plastic Reconstructive Surgery Vol.19 No.2

Recently, combined with social complexity, increment of medical demand and supply and the change of esthetic category, admission and operation of the patients of facial deformity have been changed with annual change. This study was conducted in the concept of helping the overall character of orthognathic surgery in future understood and being an important index in the establishment of better treatment course, through the patient, on whom was operated orthognathic surgery via sagittal split ramal osteotomy in our Dept. of Oral & Maxillofacial Surgery, Chonbuk National University Hospital from 1991. 1. 1 to 1995. 12. 31. The results were obtained as follows. 1. The ratio of male to female was 1 : 1.33 and the ages between 16 and 25 year was 73.6%, and the mean age was 20.4 years. 2. The ratio of setback amount between 6 to 15mm was 84.6% and the advancement amount between 1 to 10mm was 89% and the mean amount of movement was 9.0mm in setback, and 3.6mm in advancement. 3. After removal of maxillomandibular fixation(MMF), the distinction of sex was not statistically significant in ROM. 4. The ROM following methods of fixation was statistically significant in 3rd(P<0.05), 8th, and 12th week(each P<0.01), with faster rehabilitation in rigid fixation which had shorter MMF period. 5. The rehabilitation of ROM following the operation methods was statistically significant in 1st(P<0.05), 2nd, 3rd, 4th, 6th, 8th, and 12th week(each P<0.01) with faster rehabilitation in the case of SSRO than Lefort I / SSRO (Two jaw surgery). 6. The rehabilitation of ROM following directions of mandibular movement did not manifest a statistically significant difference in both setback and advancement.