미생물 포괄 고정화방식을 이용한 수산물 가공공장 폐수처리

정병철,장수현,김종배,김건배,최선남,이근우,정병곤 7개 국립대학교 환경연구논문집 공동발행 위원회 2005 공업기술연구 Vol.5 No.-

Feasibility of simultaneous removal of organic and nitrogen is evaluated as applying microbial entrapping method to treat fish processing wastewater. Treatability test is conducted immobilizing activated sludge from municipal sewage treatment plant to gel matrix made of cellulose triacetate. Stable operation can be possible when applying organic and nitrogen loading rate increasingly to wastewater treatment system composed of anoxic and oxic tank. Organic loading rate and nitrogen loading rate are applied 0.65-1.72kg COD/㎥/d and 0.119-0.317kg T-N/㎥/d, respectively. In case of wastewater from fish processing plant used in this study, it is evaluated that 0.3kg T- N/㎥/d is upper limit of applicable space loading rate because effluent T-N concentration is exceed 60mg/L, legal effluent dishargeable limit of T-N concentration in Korea, when space loading rate is exceed 0.3kg T-N/㎥/d. It is evaluated that nitrification of system is performed efficiently regardless fo variation of applied loading rate because removal efficiency of NH_(4)^(+)-N is relatively constant when the applied NH_(4)^(+)-N loading rate is increased gradually, while decrease of T-N removal efficiency is apparent when the applied loading rate is increased gradually. Nitrate removal efficiency in this study is varied from 98.62% to 99.51% depending on applied loading rate, while nitrification efficiency of oxic reactor is varied from 94.0% to 96.9%. It is showed that COD removal efficiency is varied from 94.2% to 96.6% and T-N removal efficiency is varied from 73.4% to 83.4% depending on loading rate applied in this study.

CFRP복합재료의 적층각에 따른 가공 특성

정성택,박종남,김선진,조규재 한국공작기계학회 2002 한국공작기계학회 춘계학술대회논문집 Vol.2002 No.-

In recent days the more use of CFRP composite is in the airplane, automobile, and sport goods, etc., the more necessity of research on it in this engineering. In this research, the CFRP composite specimen are fabricated by 48 CFRP plies with 8 orientation angles, and the specimens are drilled with 3 tools. The results are analyzed with consideration of cutting force, type of tools and fabrication condition. The specimens with each drilling conditions are also investigated with SEM. The optimal drilling conditions such as drill types and cutting force with respect to the fabricating condition are studied.

좌심방에 발생한 원발성 미분류 방추세포 육종 1례

조정환,홍그루,송인욱,손창우,정선영,남종호,김미진 영남대학교 의과대학 2009 Yeungnam University Journal of Medicine Vol.26 No.2

형성평가에 대한 과학교사들의 인식 및 실태

南貞姬,成乙善,飮在鎬,金慶姬,崔秉舜 한국교원대학교 과학교육연구소 1999 청람과학교육연구논총 Vol.9 No.1

전국의 초, 중, 고등학교 과학교사 197명을 대상으로 과학교육에서 형성평가에 대한 인식 및 이에 대한 실태를 질문지를 이용하여 조사하였다. 교사들은 학교교육에서 평가의 가장 중요한 목적이 학습목표의 성취를 확인하기 위한 것이라고 생각하고 있었으며, 가장 적절한 평가방법은 형성평가라고 생각하고 있었다. 따라서 형성평가는 수업 후반부에 학습내용의 성취정도를 확인하는 평가라고 인식하고 있었다. 대부분의 교사들이 형성평가가 매우 필요하다고 인식하고 있었고, 그 이유로 학습목표 달성 정도의 확인을 들었다. 그러나 과학 수업 중 수시로 이루어지는 형성평가는 적었다. 형성평가의 실시를 어렵게 만드는 원인으로 학생 수 과다, 시간 부족, 준비의 어려움을 들었으며, 형성평가로부터 얻은 정보는 학생들의 성취수준을 판단하는데 이용한다고 응답하였다. The science teachers' perceptions and the status of formative assessment in science teaching were identified through a questionnaire. The majority of teachers thought that the most important goal of assessment in education was to identify to what extent pupils achieved learning objectives. They suggested that formative assessment was the most appropriate method regardless of the purposes of assessment. They thought that formative assessment was an assessment carried out at the end of lesson to identify to what extent pupils achieved learning objectives. The teachers stressed the need for formative assessment to identify what pupils achieved. But they carried out formative assessment about once a week and there were very few teachers carrying out formative assessment during the lesson. They responded that it was difficult to carry out formative assessment because of large class size, lack of time and difficulty in preparation. And they used the information from formative assessment to judge the level of attainment.

톱밥과 농산부산물을 이용한 검은비늘버섯(Pholiota adiposa)의 재배

이상선,이정우,조남석 한국목재공학회 2002 목재공학 Vol.30 No.1

본 연구에서는 검은 비늘버섯을 유용한 식용버섯으로 개발하기 위하여 톱밥 및 다양한 농산부산물을 기질로 하여 버섯재배를 실시하였으며, 기질의 홉합비가 버섯재배 및 생산량에 미치는 영향을 구명하고자 하였다. 톱밥을 이용한 버섯재배에서 수종별로는 미류나무가 795 g으로서 가장 많은 버섯이 생산되었으며, 아까시나무가중간정도, 상수리나무가 3수종 가운데 가장 적은 양이 생산되었다. 3수종의 톱밥을 30% 및 50% 비율로 혼합한 배지에서 아까시나무톱밥의 혼합으로 많은 버섯 생산을 결과하였는데, 아까시나무톱밥 70%+미류나무톱밥 30%가 265 g의 버섯을, 아까시나무톱밥 50%+미류나무톱밥 50% 조합에서는 228 g의 높은 버섯생산량을 나타냈는데 대하여, 상수리나무톱밥이 혼합되면 버섯생산량이 낮아졌다. 이러한 결과로부터 톱밥 혼합 배지에서 아까시나무는 부재료로서 매우 가치가 있는 것으로 나타났다. 모든 농산부산물의 경우에도 버섯의 증수효과를 결과하였다. 이러한 결과로부터 검은비늘버섯의 재배에 톱밥, 특히 아까시나무 및 농산부산물을 이용할 수 있음이 밝혀졌다. Cultivation of Pholiota adiposa on sawdust media and its mixed substrates with various agricultural by-products was attempted. The composition of each substrates were compared from the viewpoint of cultivation possibilities with the production of Pholiota adiposa. Populus deltoides showed the best production of the mushroom with 795 g, followed by Robinia pseudo-acacia and Quercus acutissima. The mixed sawdust media with 70% of Robina pseudo-acacia and 30% of Populus deltoides showed the best production of the mushroom with 265 g followed by the mixture of Robinia pseudo-acacia and Populus deltoides with 50% each with 228 g, while the addition of Quercus acutissima showed the negative effect for the production of Pholiota adiposa. Thus, Robinia pseudo-acacia was considered to be an effective amendment for the production of the mushroom. In addition, various kinds of agricultural by-products showed additive effect for the production of the mushroom, too. Therefore, we could concluded that the sawdust of Robinia pseudo-acacia and agricultural by-products can be used to cultivate Pholiota adiposa.

흰쥐 샘뇌하수체의 면역전자현미경적 연구 : 젖샘자극호르몬 분비세포와 성장자극호르몬 분비세포

하상선,박경호,양남길,안의태,고정식 순천향의학연구소 1995 Journal of Soonchunhyang Medical Science Vol.1 No.2

본 실험은 흰쥐 샘뇌하수체의 세포형태를 밝히기 위하여 이중면역금입자표지법을 이용하였다. 체중 200-250g의 Sprague Dewley계 숫흰쥐를 실험동물로 사용하였다. ether로 마취된 후 뇌하수체전엽을 적출하여 1% glutaraldehyde- 1% paraformaldehyde액으로 일차고정하였으며, 2% osmium tetroxide액에 이차고정하였다. 고정이 끝난 조직은 alcohol과 propylene oxide로 탈수한 후 araldite혼합액에 포매하였다. 포매된 조직은 LKB-V ultratome으로 60-70cm두께의 얇은 절편을 작성하여 300 mesh nickel grid에 붙인 다음 면역염색 및 이중면역금입자표지법을 시행하였다. 젖샘자극호르몬에 대한 면역염색은 sodium m-periodate로 45분간 처리한 다음, 비특이적 면역반응을 제거하기 위해서 bovine serum albumin(BSA, Sigma) 1% 용액을 사용하였으며, 완충용액으로는 Tris buffered saline, pH 8.2(TBS; 20mM Tris buffered + 20mM NaCl + 0.01% sodium azide)을 사용하였다. 일차항체는 rabbit anti ovine prolactin(ICN Chemicals)을 1 : 3,000으로 희석하여 사용하였으며, 이차항체는 biotin이 표시된 goat anti rabbit Ig G(희석비율 1 : 500, Amersham)을 사용하였고, 금입자표지는 streptavidin gold(희석비율 1 : 100, 10nm, Amersham)을 사용하였다. 성장자극호르몬에 대한 면역염색은 sodium m-periodate로 45분간 처리한 다음, 완충용액으로는 phosphate buffered saline, pH 7.4(0.01M)을 사용하였다. 비특이적 반응을 줄이기 위하여 100mM ammonium chloride로 처리한 후 rabbit anti human growth hormone(BioGenex)을 1 : 40으로 희석하여 면역 반응을 시킨후, protein A-gold(희석비율 1 : 50, 5 nm, BioCell)로 금입자표지를 하였다. 이중면역염색은 Bendayan(1982)의 방법을 변형하여 시행하였는데, grid의 한쪽 면은 젖샘분비자극호르몬의 항체, 다른 쪽 면은 성장자극호르몬의 항체로 반응시켰다. 면역염색이 끝난 절편은 uranyl acetate와 lead citrate로 염색한 후 JEM 100 CX-Ⅱ 전자현미경으로 관찰하여 다음과 같은 결과를 얻었다. 흰쥐 샘뇌하수체를 이중면역금입자표지법을 이용하여 젖샘자극호르몬분비세포는 3종류, 성장자극호르몬세포는 2종류로 구분할 수 있었다. 1. 젖샘자극호르몬분비세포는 불규칙한 모양을 한 큰 분비과립(300-700 nm)을 가진 성숙세포, 크기가 다양한 둥근 분비과립(150-200 nm)을 가진 중간 세포와 크기가 작은 둥근 분비과립(100-150 nm)을 가진 미성숙세포로 나눌 수 있었다. 2. 성장자극호르몬분비세포는 크고 둥근 분비과립(200-500 nm)을 가진 제 1 형 세포와 상대적으로 작고 둥근 분비과립 (150-200 nm)을 가진 제 Ⅱ형 세포로 나눌 수 있었다. 3. 젖샘자극호르몬과 성장자극호르몬이 한 세포내에 함께 존재하는 경우는 관찰 할 수 없었다. This experiment was aimed at clarifying immunocytochemical characteristics of growth hormone cells and prolactin cells in male rat adenohypophysis, using double immunogold method. Under ether anestehesia, male rats weighing 200-250 gm were decapitated. Adenohypophysis were fixed in the 1% glutaraldehyde - 1% paraformaldehyde solution. followed by refixation in the 2%osmium tetroxide solution. Dehydrated blocks were embedded in araldite mixture. The sections were cut on a LKB V ultrotome, and ultrathin sections were placed on nickel rid(300 mesh). The section-bearing grids were floated upside down on th esolutions in a moisture chamber at room temperature. Sections were etched with a saturated solution of sodium m-periodate for 45 min. Aftr etching. sections were pretreated with 0.02M Tris buffered saline(TBS), pH 8.4, with 1% bovine serum albumin(BSA, Sigma) for 60 min, then treated with rabbit anti-sheep prolactin(ICN incubated 60 min in biotinylated goat anti-rabbit IgG(Amersham) diluted 1:100 in TBS with 0.1% BSA. Then sections were incubated on streptavidin gold rinsed with TBS with 0.1% BSA. After each step, the grids were briefly rinsed with TBS with 0.1% BSA. After the streptavidin gold step, the sections were jet washed with distilled water. According to Bendayan(1982) method, the opposite side of the grid was etched with saturated solutin of sodium m-periodate for 45 min. Aftr etching, sections were treated with 0.01M phosphate buffered saline(PBS), pH 7.4, with 0.1% BSA and 0.1M ammonium chloride for 60 min, then treated with rabbit anti-human growth hormone(BioGenex) diluted 1:40 in PBS with 0.1% BSA for overnight. Grids were incubated 60 min in protein A-gold(5 nm, BioCell) diluted 1:50 in PBS with 0.1% BSA. The sections were jet washed with distilled water. The ultrathin sections stained with uranyl acetate and lead citrate were observed with JEM 100CX II electron microscope. The results were as follow: Three types of prolactin cells and two types of growth hormone cells of the rat adenohypophysis were recognized by double immunogold electron microscopy. 1. Matrue prolactin cells are characterized by irregulary shaped large secretory granules (300-700 nm): intermediate type cells contain round granules of varying sizes(150-200 nm): and immature type cells have small round secretory granules(100-150 nm). 2. Type I growth hormone cells are characterized by large round secretory granules(200-500 nm): type II growth hormone cells are characterized by large round secretory granules(150-200 nm). 3. In the male rat adenohypophysis double immunogold labeled with 10 nm gold particles for prolactin and with 5 nm gold particles for growth hormone proved that growth hormone and prolactin were not contained in the same cell at the same time.

복합레진의 조건등색에 관한 연구 : D_(65), A, C, FCW and TL84

박기정,황윤찬,김선호,오원만,황인남 전남대학교 치의학연구소 2003 구강과학 Vol.15 No.2

There were problems in selecting exact colors of composite resins currently used in clinic by examining with naked eyes. This study was done to present a criterion in selection of the most proper light sources and materials by measuring metamerism index of the light curing composite resins with spectrocolorimeter. Metamerism is present when two objects appear to be the same color in one illuminant but different in another. This is due to the fact that they have different spectral curves that fail to match under the second illuminant. In this study, five light polymerized composite resins; Esthet-X, Filteck Z250, Filteck A110, Charisma, Vitalescence which are currently used in clinic were chosen based on Vita shade. Five samples were made for shade of each product with Teflon mold(diameter: 15mm, thickness: 2mm). Compressed resins with glass slab were light polymerized with a visible light curing unit(Optilux 500, 13mm tip diameter, Demetron, USA) for 60 seconds. Polymerized samples were removed and those were grinded to 2.0mm in thickness with sand papers(#600 & #1000). Samples were carefully prepared without fingerprints and impurities in grinding procedure and kept in distilled water for a week at room temperature. Metamerism index of each samples on a Barium sulfate plate(L^(*)=96.54, a^(*)=0.19, b^(*)=0.01) prepared for sample fixation were measured with spectrocolorimeter(Miniscan XE plus. Model 4000s. Hunter Lab, USA) by applying standard light source D65, C, Fcw, TL84' and A. Standardization was done with Reference standard(X=80.8, Y=85.7, Z=90.8) and Light trap. Samples were kept in distilled water at room temperature in all procedures. The results are as follows. 1. Different resins using same Vita shade showed recognizable color difference(ΔE^(*)>2). 2. All composites had Ml below accepted value 0.5 between standard illuminant(D65, C, & A) and below 1.5 under fluorescent condition (Fcw & TL84). 3. Ml value between D65 and A showed higher value than Ml value between other source of light(p<0.01). 4. All resins except Z25O showed Ml value that A3 is higher than Al between D65 and A(p<0.05).

濟州産 柑橘醱酵酒 蒸溜酒의 熟成條件

高正三,吳現道,高男權,姜順善 濟州大學校 亞熱帶農業硏究所 1992 亞熱帶農業硏究 Vol.9 No.-

제주산 온주밀감을 이용하여 醱酵最適條件에서 얻어진 감귤주의 單式蒸溜하여 알콜농도를 43˚와 60˚로 조절한 다음 불란서산 참나무 술통재의 切片(1×1×3cm)을 浸漬 하여 熟成條件을 검토하였다. 알콜농도 60˚인 증류수중의 메탄올은 0.136g/100㎖, 알데히드는 4.07㎎/100㎖휴젤油는18.35㎎/100㎖, 에스테르는 27.03㎎/100㎖였다. 알콜농도가 높고 온도가 높을수록 참나무성분의 浸出이 잘 일어났으며, 단기간 熟成을 위해서는 다소 고온에서 熟成하는 것이 좋을 것으로 판단되었다. 숙성 pH는 4.1에서 색소침출효과가 좋았으며 자외선 처리효과는 없었다. 色素浸出은 온도에 많은 영향을 받고 있는 것을 알 수 있었으며, 官能檢査 결과 45˚, pH 4.1에서 6개월 熟成時에 외관 및 기호도에서 충분한 상품가치를 나타내었다. 감귤 브랜디의 경우 외국산 유명제품과 큰 차이를 보이지 않아 브랜딩기술의 확립과 熟成技術의 보완한다면 産業化에 대한 충분한 가능성이 있는 것으로 平價되었다. In order to produce citrus brandy made from Citrus unshiu produced in Cheju, aging conditions of citrus fine spirit with dipping oak chip were investigated. Citrus fine spirit prepared with simple distillation of citrus wine was adjusted to 43。 and 60。 alcohol concentration, and then three pieces of oak chip (1×1×3cm) was added to 300㎖ citrus fine spirit. The contents of methanol, aldehyde, fusel oil and ester were 0.136g/100㎖, 4.07mg/100㎖, 18.35mg/㎖ and 27.03mg/100㎖ respectively. The absorbance at 500nm of citrus fine spirit was increased with high alcohol concentration and high temperature. Color extraction from oak chip was mainly affected on temperature, and the effect of UV irradiation was not appeared. Compared with commercial Scotch whisky, citrus brandy adjusted to pH 4.1 and aged at 45℃ for 6 month was good in sensory evaluation.

우리 대학 기계공학 계열 학과의 교육성과 및 만족도에 관한 설문분석 사례 연구(1)

김진남,승삼선,이정우 三陟大學校 2001 論文集 Vol.34 No.1

Mechanical engineering educational survey for graduating seniors has been conducted in school of mechanical engineering, precision mechanical engineering and vehicle engineering to improve educational program objectives, accomplishment and curriculum. The questionnaire is prepared for according to KCUE(Korean Council For University Education) estimated criteria and 12 outcomes of the ABEEK(Accreditation Board of Engineering Education in Korea) accredited criteria. And the contents of questionnaire consist of engineering education ability, design ability, experiment and exercise, and etc.. The collected data have been analyzed statistically based on 12 outcomes of the ABEEK accredited criteria to estimate how much students are satisfied with the current engineering education. Its results help professors to setup the directions of education and to teach the proper subjects. The analysis results show that the current engineering educational objectives need to be modified to satisfy the ABEEK accredited criteria and engineering curriculum restructuring is inevitable to include more design and experiment/exercise courses.

변색 실활치에 대한 carbamide peroxide gel의 표백효과

박선아,김선호,황윤찬,오병주,윤창,박영준,정선와,황인남,오원만 大韓齒科保存學會 2002 Restorative Dentistry & Endodontics Vol.27 No.4

The bleaching of discolored nonvital teeth is conservative treatement that satisfy the cosmetic desire. The most common method for this treatement, walking bleaching, is using 30% hydrogen peroxide and sodium perborate. Many alternatives are suggested for preventing the external cervical root resorption that is the common complication of the nonvital teeth bleaching with 30% hydrogen peroxide. The same extent of oxidation reactions as that resulted by the bleaching with the application of 30% hydrogen peroxide and sodium perborate can also be acquired more safely by materials that contain 10% carbamide peroxide, used primarily for the bleaching of vital teeth. Therefore, this study was performed to evaluate the efficacy of 10% and 15% carbamide peroxide bleaching gel in nonvatal teeth bleaching. The internal bleaching of intentionally discolored teeth was performed in vitro with 10% carbamide peroxide (Group 1), 15% carbamide peroxide (Group 2), mixture of distilled water and sodium perborate (Group 3), and mixture of 30% hydrogen peroxide and sodium perborate (Group 4). The bleaching materials were refreshed following 3, 6, 9 and 12 days. To evaluate the bleaching effect, the color change of the crowns was measured at 1, 2, 3, 4, 7 and 15 days of bleaching using the colorimeter. The results were as follows : 1. L^* and ΔE^* values were increased with time in all bleaching agents(p<0.01). 2. There was no significant difference in L^* and ΔE^* value among bleaching agents. 3. Δ^* value higher than 3 was shown after 3 days of bleaching with 10% carbamide peroxide gel, 1 day with 15% carbamide peroxide gel, 4 days with mixture sodium perborate and distilled water and 4 days with mixture sodium perborate and 30% hydrogen peroxide, respectively. These results revealed that the use of 10% and 15% carbamide peroxide bleaching gel in non-vital teeth bleaching is as effective as mixture of distilled water and sodium perborate and mixture of 30% hydrogen peroxide and sodium perborate. Accordingly, carbamide peroxide could be used clinically to bleach discolored non-vital teeth.