In-pile tritium release behavior and the post-irradiation experiments of Li4SiO4 fabricated by melting process

Zhao Linjie,Yang Mao,Xiao Chengjian,Gong Yu,Ran Guangming,Chen Xiaojun,Li Jiamao,Yue Lei,Chen Chao,Hou Jingwei,Wang Heyi,Long Xinggui,Peng Shuming 한국원자력학회 2024 Nuclear Engineering and Technology Vol.56 No.1

Understanding the tritium release and retention behavior of candidate tritium breeder materials is crucial for breeder blanket design. Recently, a melt spraying process was developed to prepare Li4SiO4 pebbles, which were subsequently subjected to the in-pile tritium production and extraction platform in China Mianyang Research Reactor (CMRR) to investigate their in-situ tritium release behavior and irradiation performance. The results demonstrate that HT is the main tritium release form, and adding hydrogen to the purge gas reduces tritium retention while increasing the HT percent in the purge gas. Post-irradiation experiments reveal that the irradiated pebbles darken in color and their grains swell, but the mechanical properties remain largely unchanged. It is concluded that the tritium residence time of Li4SiO4 made by melt spraying method at 467 ◦C is approximately 23.34 h. High-density Li4SiO4 pebbles exhibit tritium release at relatively low temperatures (<600 ◦C) that is mainly controlled by bulk diffusion. The diffusion coefficient at 525 ◦C and 550 ◦C is 1.19 × 10 11 cm2/s and 5.34 × 10 11 cm2/s, respectively, with corresponding tritium residence times of 21.3 hours and 4.7 hours.

Self-adaptive Si/reduced graphene oxide scrolls for high-performance Li-ion battery anodes

Yu, Y.,Li, G.,Zhou, S.,Chen, X.,Lee, H.W.,Yang, W. Pergamon Press ; Elsevier Science Ltd 2017 Carbon Vol.120 No.-

<P>A Si/C composite with Si nanoparticles (nSi) uniformly dispersed in the interlayers of reduced graphene oxide scrolls (rGS) is successfully developed for high-performance Li-ion battery anodes. The rGS can deform reversibly with the repeated expansion/contraction of nSi to maintain contact between the nSi and the conductive rGS network, which can effectively buffer large volume changes and maintain continuous large-area core-shell electrical contact. Additionally, the continuous electrical network of rGS greatly enhances the electrical conductivity, and the open structures at the ends and sides of rGS provide paths for rapid diffusion of Li ions, thus enhancing the rate performance. By virtue of the rational design, the composite shows a high reversible specific capacity of 2030 mA h g(-1) at 0.2 A g(-1), high cycling stability of 1200 mA h g(-1) at 4 A g(-1) with 99.2% capacity retention after 200 cycles, and an excellent rate performance of 1000 mA h g(-1) even at 8 A g(-1). (C) 2017 Elsevier Ltd. All rights reserved.</P>

Dislocation Density-Based Constitutive Model and Processing Map for T2 Copper During Isothermal and Time-Variant Deformation

Gang Chen,Yu Jin,Jing Wang,Cheng Zhang,Qiang Chen,Hongming Zhang,Xingjian Zhao,Zhiyong Li,Changhai Xie,Zhiming Du 대한금속·재료학회 2022 METALS AND MATERIALS International Vol.28 No.9

Isothermal compression tests were carried out to study the hot deformation behavior of T2 copper under various conditions. The deformation parameters, such as temperature and strain rate, have strong influence on flow stress and microstructureevolution of the alloy. A unified dislocation density-based model considering dynamic recovery and recrystallization wasestablished. And material parameters of the developed model were optimized by genetic algorithm. Comparisons betweenthe experimental and model data demonstrates that the developed model can precisely describe the flow behavior at quitewide range of deformation conditions. Meanwhile, the designed iterative procedure allows the model to be applied in timevariantdeformation conditions. Processing map and microstructure examination were constructed to optimize the processingwindow of the studied alloy. According to the processing maps, flow instability mainly appeared at low temperatures of500–650 °C and strain rates higher than 0.1 s−1. The optimum deformation parameters of T2 copper was concluded as thetemperature range of 700–800 °C and the strain rate of 0.1–1 s−1.

Evolution of the effect of sulfur confinement in graphene-based porous carbons for use in Li-S batteries

Jia, Xiangling,Zhang, Chen,Liu, Juanjuan,Lv, Wei,Wang, Da-Wei,Tao, Ying,Li, Zhengjie,Zheng, Xiaoyu,Yu, Jong-Sung,Yang, Quan-Hong The Royal Society of Chemistry 2016 Nanoscale Vol.8 No.8

<P>A controllable drying strategy is proposed for the precise and non-destructive control over the structure of a 3D graphene assembly. Such an assembly is used as a model carbon material to investigate the pore structure-dependent shuttle effect and cycling performance of the cathode of a Li-S battery.</P>

Modeling urban building energy use: A review of modeling approaches and procedures

Li, Wenliang,Zhou, Yuyu,Cetin, Kristen,Eom, Jiyong,Wang, Yu,Chen, Gang,Zhang, Xuesong Elsevier 2017 ENERGY Vol.141 No.-

<P><B>Abstract</B></P> <P>With rapid urbanization and economic development, the world has been experiencing an unprecedented increase in energy consumption and greenhouse gas (GHG) emissions. While reducing energy consumption and GHG emissions is a common interest shared by major developed and developing countries, actions to enable these global reductions are generally implemented at the city scale. This is because baseline information from individual cities plays an important role in identifying economical options for improving building energy efficiency and reducing GHG emissions. Numerous approaches have been proposed for modeling urban building energy use in the past decades. This paper aims to provide an up-to-date review of the broad categories of energy models for urban buildings and describes the basic workflow of physics-based, bottom-up models and their applications in simulating urban-scale building energy use. Because there are significant differences across models with varied potential for application, strengths and weaknesses of the reviewed models are also presented. This is followed by a discussion of challenging issues associated with model preparation and calibration.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Advances in urban buildings energy models are reviewed. </LI> <LI> Strengths and weaknesses of urban building energy models are discussed. </LI> <LI> The workflow of physics-based bottom-up models are illuminated. </LI> <LI> Challenges and future research avenues in urban buildings energy use modeling are highlighted. </LI> </UL> </P>

Risk factor analysis of coexisting endometrial carcinoma in patients with endometrial hyperplasia: a retrospective observational study of Taiwanese Gynecologic Oncology Group

Yu-Li Chen,Kung-Liahng Wang,Min-Yu Chen,Mu-Hsien Yu,Chen-Hsuan Wu,Yu-Min Ke,Yi-Jen Chen,Yin-Yi Chang,Keng-Fu Hsu,Ming-Shyen Yen 대한부인종양학회 2013 Journal of Gynecologic Oncology Vol.24 No.1

Objective: To evaluate the clinical outcome and parameters related to coexisting endometrial carcinoma in women with tissuediagnosed endometrial hyperplasia. Methods: Between January 1991 and December 2009, three hundred and eighty-six patients with the presumptive diagnosis of endometrial hyperplasia were retrieved. Among these, one hundred and twenty-five patients were identified as having coexisting endometrial carcinoma in hysterectomy specimens. The three hundred and eighty-six patients were divided into two groups: the hyperplasia-benign group (261 cases) and the hyperplasia-malignant group (125 cases). Several clinical parameters including age, menopausal status, history of abnormal uterine bleeding, obstetrical history, medical history of diabetes and hypertension, BMI, and preoperative pathologic results were investigated. Results: Age ≥53 (odds ratio [OR], 2.40; 95% confidence interval [CI], 1.26 to 4.57), menopausal status (OR, 2.07; 95% CI, 1.14to 3.76), diabetes history (OR, 7.33; 95% CI, 2.79 to 19.26), abnormal uterine bleeding (OR, 3.99; 95% CI, 1.22 to 13.02), atypical endometrial hyperplasia (OR, 7.38; 95% CI, 4.03 to 13.49), and body mass index ≥27 (OR, 3.24; 95% CI, 1.76 to 5.97) were independent risk factors for prediction of endometrial hyperplasia coexisting with endometrial carcinoma. The diagnostic efficacy of atypical endometrial hyperplasia to predict the endometrial hyperplasia coexisting with endometrial carcinoma was better than or similar to those of other independent factors and combinations of these factors. Conclusion: Coexisting malignancy should be considered when examining endometrial hyperplasia patients with the related risk factors, especially atypical endometrial hyperplasia.

Reconsidering the Hierarchy and Translation of “Physical Education/Sports” Related Terms: Taiwan Perspective

Jeffrey Yu,Jun Lian,Ruei-Hong Li,Chen-Sin Hung,Dong-Tai Chen,Yu-Kai Chang 대한운동학회 2024 아시아 운동학 학술지 Vol.26 No.1

Objectives In the past centuries, the concept of “physical education” has changed from a more general concepts including physical activities and sports, to specifically inferring “instruction of physical activity”. Instead, “sports” has become the comprehensive concept of sports, exercise, and physical education. Given to the inconsistent terminologies and English translations of “體育 (ti-yu)” (physical education) and “運 動 (yun-dong)” (sports or exercise) in Mandarin, the purpose of this study was to investigate in the current terminology usage, hierarchy, and the English translation of “體育 (ti-yu)” and “運動 (yun-dong)” in Taiwan. Met hods Three government authorities, two sport related universities, eight top sport and exercise journals, and nighty-six college departments in Taiwan were analyzed. Results “運動 (yun-dong)” was the most widely used terminology as “體育 (ti-yu)” occupied the majority usage among government authorities, sport related universities, and title of top sport and exercise journals. Regarding English translation, despite of “department of physical education”, “sports” remained the most common terminology. Moreover, “體育 (ti-yu)” and “sports” are the highest hierarchy among government authorities, and sport related university; “體育 (ti-yu)” and “physical education” are the highest hierarchy among traditional sport and exercise journals; “運動 (yun-dong)” and “sports” are the highest hierarchy among college departments also the mainstream of current translation and hierarchy. Conclusions “體育 (ti-yu)” was the highest hierarchy in the past. However, “運動 (yun-dong)” has been the mainstream of the highest hierarchy in Mandarin according to college departments. In English, “sport(s)” is the main term in Taiwan when translating “體育 (ti-yu)” and 運動 (yun-dong)”, also being the highest hierarchy. On the other hand, “體育 (ti-yu)” and “physical education” are utilized regarding those departments focusing on educating PE teachers. This study expects the terminology, English translations, and hierarchy being align with the mainstream of current translation and hierarchy in the future.

RAPD Variation and Genetic Distances among Tibetan, Inner Mongolia and Liaoning Cashmere Goats

Chen, Shilin,Li, Menghua,Li, Yongjun,Zhao, Shuhong,Yu, Chuanzhou,Yu, Mei,Fan, Bin,Li, Kui Asian Australasian Association of Animal Productio 2001 Animal Bioscience Vol.14 No.11

Relationship among Tibetan cashmere goats, Inner Mongolia cashmere goats and Liaoning cashmere goats was studied using the technique of random amplified polymorphic DNA (RAPD). One primer and four primer combinations were screened. With the five primers and primer combinations, DNA fragments were amplified from the three breeds. Each breed has 28 samples. According to their RAPD fingerprint maps, the Nei's (1972) standard genetic distance was: 0.0876 between Tibetan cashmere goats and Inner Mongolia cashmere goats, 0.1601 between Tibetan cashmere goats and Liaoning cashmere goats, 0.0803 between the Inner Mongolia cashmere goats and Liaoning cashmere goats. It coincides with their geographic location. The genetic heterogeneity of Tibetan cashmere goats, Inner Mongolia cashmere goats and Liaoning cashmere goats is 0.3266, 0.2622 and 0.2475 respectively. It is also consistent with their development history.

Regulating the magnetic anisotropy by Hf thickness and heat treatment in Pt/Co/Hf films

Li Minghua,Zhang Shijie,Wang Shuanghai,Li Yongzeng,Liu Lu,Chen Yu,Shi Hui,Yu Guanghua 한국물리학회 2022 Current Applied Physics Vol.34 No.-

Pt/Co/Hf multilayers were prepared by magnetron sputtering, and the magnetic anisotropy was effectively regulated by Hf thickness and heat treatment in Pt/Co/Hf films. The interface microstructures were characterized. The influence of the interface microstructure on magnetic properties was studied. The results show that the magnetic anisotropy in Pt/Co/Hf films is closely related to the interface microstructure, which is influenced by Hf thickness and the heat treatment temperature. Microstructure analysis shows that after the Pt(3)/Co(1.5)/Hf (1) film is heat-treated, the CoOx content increases, more CoPt(111) forms, the interface is smoother and sharper, and the roughness of the Co/Hf interface decreases. Several factors work together to cause the magnetic anisotropy of the sample to change from in-plane magnetic anisotropy (IMA)to perpendicular magnetic anisotropy (PMA).

Early IL-17A Prevention Rather Than Late IL-17A Neutralization Attenuates Toluene Diisocyanate-Induced Mixed Granulocytic Asthma

Chen Shuyu,Yu Li,Deng Yao,Liu Yuanyuan,Wang Lingwei,Li Difei,Yang Kai,Liu Shengming,Tao Ailin,Chen Rongchang 대한천식알레르기학회 2022 Allergy, Asthma & Immunology Research Vol.14 No.5

Purpose: Interleukin (IL)-17A plays a critical role in the pathogenesis of allergic airway inflammation. Yet, the exact roles of IL-17A in asthma are still controversial. Thus, the aim of this study was to dissect the roles of IL-17A in toluene diisocyanate (TDI)-induced mixed granulocytic asthma and to assess the effects of neutralizing antibody in different effector phases on TDI-induced asthma. Methods: IL-17A functions in allergic airway inflammation were evaluated using mice deficient in IL-17A (Il17a−/−) or IL-17A monoclonal antibody (IL-17A mab, intraperitoneally, 50 μg per mouse, 100 μg per mouse). Moreover, the effects of exogenous recombinant IL (rIL)-17A in vivo (murine rIL-17A, intranasally, 1 μg per mouse) and in vitro (human rIL-17A, 100 ng/mL) were investigated. Results: TDI-induced mixed granulocytic airway inflammation was IL-17A-dependent because airway hyperreactivity, neutrophil and eosinophil infiltration, airway smooth muscle thickness, epithelium injury, dysfunctional T helper (Th) 2 and Th17 responses, granulocytic chemokine production and mucus overproduction were more markedly reduced in the Il17a−/− mice or by IL-17A neutralization during the sensitization phase of wild-type (WT) mice. By contrast, IL-17A neutralization during the antigen-challenge phase aggravated TDI-induced eosinophils recruitment, with markedly elevated Th2 response. In line with this, instillation of rIL-17 during antigen sensitization exacerbated airway inflammation by promoting neutrophils aggregation, while rIL-17A during the antigen-challenge phase protected the mice from TDI-induced airway eosinophilia. Moreover, rIL-17A exerted distinct effects on eosinophil- or neutrophil-related signatures in vitro. Conclusions: Our data demonstrated that IL-17A was required for the initiation of TDI-induced asthma, but functioned as a negative regulator of established allergic inflammation, suggesting that early abrogation of IL-17A signaling, but not late IL-17A neutralization, may prevent the progression of TDI-induced asthma and could be used as a therapeutic strategy for severe asthmatics in clinical settings.