비강 및 비인두에 발생한 도립유두종과 편평상피암종의 p53단백 및 세포증식능에 관한 연구

한주호,윤기중,이재규,신대균,박근호,조향정,문형배 圓光大學校 醫科學硏究所 1996 圓光醫科學 Vol.12 No.2

The inverted papilloma and squamous cell carcinoma are common neoplasia in the sinonasal cavity and nasopharynx, but the incidence of these tumors are very low and the study on the oncogenesis or biological activity of the tumor cells are not well known. This study was designed to evaluate the oncogenic roles of the p53 gene and the proliferative activity of the tumor cells in the inflammatory polyp, inverted papilloma and squamous cell carcinoma. The experiment was carried by the immunohistochemical stains about the p53 protein, PCNA and Ki-67, histochemical stain about the AgNORs. and flow cytometric analysis about the DNA ploidy using the formalin fixed paraffin embedded tissues. The frequency of the expression of p53 protein was 0%(0/16 cases) in the inflammatory polyps, 18.8% (3/16 cases) in the inverted papillomas, and 87.5%(14/16 cases) in the squamous cell carcinomas. The labelling index(%) of the PCNA and Ki-67 was 5.3% and 3.3% in the inflammatoy polyps, 29.6% and 25.2% in the inverted papillomas, and 51.9% and 36.8% in the squamous cell carcinoma. The expression of the PCNA and Ki-67 was distributed in the periphery of the tumor islands of the inverted papilloma and was distributed in the both of center and periphery of the tumor islands of the squamous cell carcinoma. The number of nuclear AgNORs was increased in the order of inflammatory polyps (0.96), inverted papillomas(1.34) and squamous cell carcinoma(2.09). The frequency of the DNA aneuploidy was 0%(0/16 cases) in the inflammatory polyps, 18.8%(3/16 cases) in the inverted papillomas. and 12.5%(2/16 cases) in the squamous cell carcinomas. Above results indicates that the changes of the p53 gene and proliferative activity of the tumor cells are involved on the oncogenesis and the biological activity of the inverted papilloma or squamous cell carcinoma in the nasopharynx and sinonasa cavity.

태백지역 사회간접자본에 관한 소고

배주한 관동대학교 기업경영연구소 1999 경영논집 Vol.18 No.-

구제도학파와 신제도학파와의 비교 연구

裵注漢,李善泰 관동대학교 기업경영연구소 1998 경영논집 Vol.17 No.-

신제도학파와 구제도학파는 통합 가능한가?

배주한 관동대학교 기업경영연구소 1999 경영논집 Vol.18 No.-

GT rotary file을 이용한 만곡 근관형성시 작업 효율 및 file 변형 발생에 관한 연구

신주희,백승호,배광식,임성삼,윤수한,김병현 대한치과보존학회 2001 Restorative Dentistry & Endodontics Vol.26 No.5

Root canal preparation process is of utmost importance in successful treatment of root canal. Also, one of the most important purpose of the root canal preparation is to enlarge the root canal three dimensionally without changing the curvature of the root canal. However, as the curvature of the root canal increases, there are many difficulties involved in formation of optimum root canal. Therefore, in order to solve the above mentioned problems, new developments in methods of root canal preparation and equipments for such purposes were made. Recently, vigorous studies about newly introduced engine-driven nitckel-ti-tanium rotary file are conducted. As shown in research results to dates, it is well established that the use of nickel-titanium file is better suited for curved root canal than stainless steel file in maintaining the curvature of root canal and reducing the deformation of root canal. However, it is also acknowledged that there are a few discrepancies in research results according to protocol, due to failure to remove variables in experiments. In addition, although it is recommended by the manufacturer that the GT rotary file should maintain a low rotational speed of 150∼350rpm and 'light pressure' as light as not to break the lead of a pencil, academic studies about the vertical force which is not yet standardized are not sufficiently explored. Therefore, this research devised and utilized a special research equipment to standardize the appropriate range of vertical force for GT rotary file through experiments by breaking of the lead of a pencil as expressed by the manufacturer and to accurately measure factors involved through repeating and recreating the environment of root canal preparation. Forming nine experimental groups by varying the vertical forces (150g, 220g, 300g) and rpm (150rpm, 250rpm, 350rpm), the effects of changing vertical forces and rpm on working efficiency were measured in terms of time expended in root canal preparation by crown-down method using a transparent resin block with 35 degree curvature and GT rotary file (z-test). The following research using this special research equipment that involved nine experimental groups and varying the vertical force for root canal preparation from 300g which is within the normal vertical force range to 700g and 1000g which fall outside the normal rpm range. The results were as follows : 1.Analysis of the experiment results revealed that the tome spent in root canal preparation decreased as the vertical forces and rpm increased (p<0.05). Also, the effects of rpm were greater than those of the vertical forces within the normal vertical force range (β-weight test) . 2.Observation of the deformation of GT rotary file revealed that deformation increases in a direct correlation with the vertical force increase and in a reverse correlation with the rpm decrease, In the case of the vertical forces close to the normal range, the probability of GT rotary file deformation were quite different depending on the rpm changes. In the case of◎eater tier◎cal forces, the occurrences of deformation of the file were more frequent regardless of the rpm changes. 3.Deformation and breakage of file were also commonly observed in the expended time measurement experiments and GT rotary file deformation experiments in which low speed rpm (150rpm) was used and at the curved portion of the resin block. Key words : GT rotary file, Crown-down method, Working efficiency, Vertical force, Rpm, Deformation and breakage of file

Paclitaxel 및 Apo-2L/TRAIL이 자궁경부암 세포주 아포토시스에 미치는 영향

김주영,남계현,김태희,이권해,이해혁,배동한 순천향의학연구소 2003 Journal of Soonchunhyang Medical Science Vol.9 No.2

Objective: TRAIL(also called Apo-2L) is a member of the tumor necrosis factor(TNF) family of cytokines which induces apoptosis cell death in a variety of tumor cell lines. It mediates its apoptotic effects through one of two receptors, DR4 and DR5, which are members of the TNF receptor family, and whose cytoplasmic regions contain death domains. TNF and Fas ligand induces apoptosis in tumor cells; however, their severe toxicity toward normal tissues hampers their application to cancer therapy. We examed if paclitaxed and/or Apo-2LTRAIL induces apoptosis of cervical cancer HeLa, SiHa, ME-180, and CaSki cells. Mehods : We have demonstrated that paclitaxel and Apo-2L/TRAIL induces apoptosis of cervical cancer HeLa, SiHa, CaSki and ME-180 cell lines in a dose-dependent manner. HeLa, SiHa, ME-180 and CaSki were obtained from American Type Culture Colection. Recombinant Human TRAIL(Chmicon). DR4 and DR5 were purchased from Santa Cruz. Paclitaxel, MTT assay Kit, Acridine orange and Ethium bormide were purchased from Sigma. HeLa and SiHa were grown in DMEM. ME-180 and CaSki were grown in RPMI. Tripan blue stain and MTT assay were done for cytotoxicity. Annexin V-FITC and PI(propidium iodide) flowcytometry for apoptosis assay. DR4 and DR% were expressed by Western Blot. Fluorescent Microscopy used Acridine orange(AO) and Ethium bromide(EB). Results : Importantly, concurrent treatment of cervical cancer cells with paclitaxed and Apo-2L/TRAIL induces significantly more apoptosis than Apo-2L/TRAIL alone. Conclusion : We need further studies which reveals possible therapeutic potential in the women with cervical cancer by suing Apo-2L/TRAIL.

寶城郡 熊峙面에 있어서의 肺吸蟲症의 疫學的 推移

李駿商,裵平元,林漢鍾,申鴻植 한국농촌보건회 1980 농촌의학·지역보건 Vol.5 No.1

가족성 고콜레스테롤혈증 유병자에서 HMG Co-A Reductasen Inhibitor 및 Bile Acid Resin의 투여로 인한 아킬레스건 황색종의 감소

채인호,한기훈,박영배,조주희,김효수,손대원,김철호,오병희,이명묵,최윤식,서정돈,이영우 대한순환기학회 1997 Korean Circulation Journal Vol.27 No.9

만성정신질환의 욕구에 대한 수요자와 공급자 측면의 비교연구(Ⅰ) : 만성정신질환자의 정신보건 욕구사정 도구 개발 예비 연구 The Development of Needs Assessment Tool for Mental Health of Chronically Mentally Ill(Preliminary Study)

이종국,한은선,안강호,김명식,김장배,손봉희,이주호 용인정신의학연구소 1999 용인정신의학보 Vol.6 No.2

제조환경변화와 기술회계의 중요성

洪孝錫,裵周漢 진주산업대학교 1997 論文集 Vol.36 No.-

The change of cost structures has challenged the accounting professions to develop a new cost management technique. Automation has changed the cost structure of many companies, so more costs are fixed in the short run. This change in cost mix has come to deemphasize such typical management accounting tools as cost-volume-profit analysis and break-even analysis. Given a high level of automation, most production cost is determined in the product planning and designing stages. So reducing the cost of products dramatically in the production stage is difficult, if not impossible. Most of the life cycle cost of products is determined in the designing stage. Shortening of the product life cycle has increased the importance of delivering a competitive product to the market quickly. Any errors in product cost or product quality are difficult to correct quickly because product life cycles are so short. The purpose of this study is to investigate the magnitude of technology accounting in changing manufacturing environment. Technology accounting embodies the concept that technology costs, which include plant, equipment, and information systems, should be treated as direct costs, equivalent to direct labor and material. Most technology costs nowadays are accounted for by amortization(or depreciation) and are included in indirect overhead. The problem with this method of accounting is that conventional amortization method is based on time, not production. In today's highly automated factories, traditional depreciation methods distort the product cost. There are two reasons for this problem. First, companies are basing their selection of depreciation methods and allocation bases on such criteria that do not mirror the manufacturing process. Second, the total of technology-related costs is large. The larger percentage technology costs take of total costs, the greater impact a misallocation puts on product cost. The goal of a technology accounting system is to more accurately assign capital investment costs to those products that benefit from them. This violates an important objective of cost accounting, which is to accurately match production costs to those products that benefit from them. Technologies are acquired to support specific activities, such as production requirements, engineering, or support tasks. Therefore, the cost of the asset should be charged only to those products that use it. By lumping technology costs are distributed over all activities masking the "real" cost of the activity.