농업인 교육 프로그램 분석

김진모,김진군,마상진,전영욱,이진화,주현미 한국농업교육학회 2007 농업교육과 인적자원개발 Vol.39 No.1

이 연구는 농업인을 대상으로 한 교육 프로그램의 내용 및 방법을 살펴봄으로써 향후 농업인 교육을 위한 기초자료를 제공하는 데 목적이 있었다. 농업인 교육프로그램 분석을 위한 개념적 틀은 관련문헌에 대한 고찰과 수집 자료에 대한 귀납적 분석을 통해 개발되었다. 그 결과, 8가지의 기관 유형, 17가지의 프로그램 내용 영역, 5가지의 교육방법, 3가지의 교육인원, 3가지의 교육기간이 도출되었다. 분석대상은 총 173개 기관의 2,483개 프로그램이었다. 이 연구의 주요 결과는 다음과 같다. 첫째, 우리나라의 농업인 교육은 국가기관 및 기술센터 등의 정부기관 주도로 이루어지고 있었다. 둘째, 재배/사육기술, 생활개선 및 농촌건강관리, 정보획득 등의 내용이 주요 교육내용으로 다루어지고 있었다. 셋째, 각 기관 유형별로 비중 있게 다루는 주요 교육내용에 있어서 다소 차이가 있었다. 넷째, 농업인 교육프로그램에서 활용되는 교육방법은 대체적으로 강의에 편중되어 있었다. 다섯째, 교육인원에 있어 중규모와 대규모 인원의 비중이 상대적으로 높았으며, 1 대 1 개별 교육은 전혀 없는 것으로 나타났다. 여섯째, 1일 혹은 3일 이상 이루어지는 교육의 비중이 상대적으로 높았으며, 2일 동안 이루어지는 교육의 비중은 비교적 낮은 편이었다. The purposes of this study were to analyze the farmer education programs in Korea, and to get implications for further program development. The framework for the analysis was developed through extensive literature review and an inductive method. As a result, eight types of organizations for farmer education, seventeen content domains of programs, five instructional methods, three categories of program participant size, and three categories of program period were derived. The subjects of analysis were 2,483 programs of 173 farmer education organizations. The major findings were as follows: 1) Farmer education programs of Korea were led by government agencies such as national organizations and extension agencies. 2) The content domains of cultivating/raising techniques, improvement of life quality and farmer health care, and information acquisition were relatively highly dealt with. 3) Main contents which were dealt with by each type of farmer education organization were differentiated. 4) In terms of instructional method, a lecture had the highest portion in most contents domains. 5) The portion of the middle size and large size of participants was relatively higher than others. And there are no programs which used one by one teaching method. 6) The portion of programs for 1 day or 3days was relatively higher, and the portion of programs for 2 days was lower.

液膜에 의한 廢水중의 重金屬이온의 分離

孫晋彦,李成植,金鍾和,全成均 동아대학교 환경문제연구소 1986 硏究報告 Vol.9 No.1

The purpose of this paper was to separate the copper and nickel ions from waste water using supported liquid membrane The effect of a given amount of carrier and ammonia concentration of up-stream was described. We used the LIX65N as carriers. The results were as follows 1. The distribution ratio of copper ions at equilibrium was shown linear increment according o the mole ratio of carrier concentration versus the concentration of metal ions increased to 2.0. The maximum distribution ratio of copper ions exceeded that of nickel by approximately 4-fold when the liquid membrane was saturated by carrier 2. The important parameters governing flux were carrier and ammonia concentration. We compared these two parameters, and then the latter influenced more than the former to get higher flux. The copper ions reacted with ammonia in the up-stream, it formed a complexes of Cu(NH₃)₄^(2+), and then diffused to interface of liquid membrane. 3. The flux of metal ions were increased with enlarging the distribution ratio of ordinary extraction. The principle of coupled transport was carried out by the difference of concentration of hydrogen ions. 4. We can be selectively separated in the mixing soultion of copper and nickel ions using LIX65N as carrier.

교량감시를 위한 센서 네트워크 보안프로토콜

임화정,전진순,이헌길 강원대학교 산업기술연구소 2005 産業技術硏究 Vol.25 No.B

The wireless sensor network consists of a number of sensor nodes which have physical constraints. Each sensor node senses surrounding environments and sends the sensed information to Sink. The inherent vulnerability in security of the sensor nodes has promoted the needs for the light weight security protocol. In this paper, we propose a non-hierarchical sensor network and a security protocol that is suitable for monitoring the man-made objects such as bridges. Furthermore, we present the efficient way of setting the routing path by storing IDs, MAC(message authentication code) and the location information of the nodes, and taking advantage of the two node states, Sleep and Awake. This also will result in the reduced energy consuming rate.

숙시닐화에 따른 참깨박 농축 단백질의 성분 변화

김진아,박정륭,차명화,김진,전정례 동아시아식생활학회 1996 동아시아식생활학회지 Vol.6 No.3

Addition of 0.5, 1.0 and 2.0g of succinic anhydride to 2g of sesame protein concentrates succinylated 44.9, 70.0 and 83.1% of the available amino groups, respectively. Considerable amount of phytate were removed in all sesame protein concentrates and the highest reduction was obtained by addition of 2.0g of succinic anhydride. Among the minerals investigated, high amount of calcium and magnesium were presented in defatted sesame flour. In the case of calcium, magnesium and iron, the contents were decreased as the degree of succinylation was increased. Most amino acid content of sesame protein concentrates was not changed by succinylation but lysine was slightly decreased. Result of color measurement showed that the higher degree of succinylation, the higher values of L and b were founded.

xDSL을 위한 오류 제어 시스템 모델링 및 성능평가에 관한 연구

권호열,전진화 강원대학교 정보통신연구소 1999 정보통신논문지 Vol.3 No.-

In the xDSL channel of the twisted pair line, there are long burst errors because of impulse noise such as NEXT(Near end crosstalk), RFI(Radio frequency interference). So if only error control code were used for burst error correction, error control system is very complex. Therefore if an interleaver that distributes burst errors to a few codewords were used with error control code, a total error control system performance is promoted. In this paper, Reed-Solomon code used for correcting these burst errors, and scrambler, sequential interleaver. The channel loss is impulse noise tested for the ANSI T1E1.4. And a total system is simulated at the matlab communication and simulink toolbox. An analysis evaluation is acquired to error rate of the error correct system, and delay time of the interleaver, interleaver efficience.

3차원 레이저 스캐너를 이용한 한국 성인 정상교합자의 안면 연조직에 대한 연구

백형선,전재민,이화진 대한치과교정학회 2006 대한치과교정학회지 Vol.36 No.1

치과교정영역에서 컴퓨터기술의 발달로 안면 경조직 및 연조직의 3차원적인 분석이 가능해졌으며 이에 따라 교정환자의 진단과 치료계획 및 치료 후의 연조직의 3차원적인 평가가 가능하게 되었다. 그러나 안면 연조직의 3차원적 분석을 위한 표준화된 기준이 없고 임상적용이 가능한 진단 프로그램은 아직 없는 실정이다. 이에 본 연구에서는 3차원 진단 시 유용한 안면 연조직 계측점들의 3차원 계측치(X, Y, Z)를 제시하고, 이를 이용하여 설정된 길이, 각도 및 비율의 정상치를 제시하고자 한다. 3차원 촬영 기구로 비접촉식 3차원 레이저 스캐너를 이용하였으며, 한국 성인 정상교합자 남녀 각각 30명(남자평균 20.1세, 여자평균 21.7세)을 연구대상으로 하였다. Rapidform 2004 프로그램(Inus Technology Inc., Seoul, Korea)으로 3차원 영상을 만든 후 3차원 입체영상에 soft tissue nasion을 원점으로 하는 좌표계(X축-좌우, Y축-상하, Z축-전후)를 설정하고 29개의 계측점을 지정한 후 거리계측 45개 항목, 각도 8개 항목, 거리비율 29개 항목을 분석하였다. 각각의 계측점의 3차원 좌표(X, Y, Z)를 구하였으며 이를 바탕으로 각각의 계측항목을 계산하여 표준화하였다. 특히 각도항목에서 transverse upper lip prominence (Ch(Rt)-UKPm-Ch(Lt))는 남자 107°, 여자 106°였고, transverse mandibular prominence (Go'(Rt)-Pog'-Go'(Lt))는 남녀 모두 76°였다. Naso frontal angle (G-N'-Pn)은 남자 142°, 여자 147°, transverse nasal prominence (Zy(Rt)-Pn-Zy(Lt))는 남자 112°, 여자 116° 남녀 간에 통계학적으로 유의차가 있었다 (p<0.05). 하안면고경 하방 2/3 (Li-Me')와 하악체길이(Go'-Me'), 입술고경(ULPm-Li)과 폭경(Ch(Rt)-Ch(Lt))의 비율은 각각 2/5로 나타났다. 관상기준평면에서 안면의 윤곽을 나타내는 계측점인 FT, Zy, Pn, ULPm, Li, Me'까지의 거리의 비는 -1/-1/1/-0.5/0.5/-0.6였다. 또한 얻어진 자료를 이용하여 한국 성인 정상교합자의 3차원 안면 모델을 제작하였으며 이는 교정진단 또는 치료결과 비교 시 template로 활용될 수 있으리라 사료된다. Developments in computer technology have made possible the 3-dimensional (3-D) evaluation of hard and soft tissues in orthodontic diagnosis, treatment planning and post-treatment results. In this study, Korean adults with normal occlusion (male 30, female 30) were scanned by a 3-D laser scanner, then 3-D facial images formed by the Rapidform 2004 program (Inus Technology Inc., Seoul, Korea.). Reference planes in the facial soft tissue 3-D images were established and a 3-D coordinate system (X axis-left/right, Y axis-superior/inferior, Z axis-anterior/posterior) was established by using the soft tissue nasion as the zero point. Twenty-nine measurement points were established on the 3-D image and 43 linear measurements, 8 angular measurements, 29 linear distance ratios were obtained. The results are as follows; there were significant differences between males and females in the nasofrontal angle (male: 142°, female: 147°) and transverse nasal prominence (male: 112°, female: 116°) (p < 0.05). The transverse upper lip prominence was 107° in males, 106° in females and the transverse mandibular prominence was 76° in both males and females. Li-Me' was 0.4 times the length of Go-Me' (mandibular body length) and the mouth height was also 0.4 times the width of the mouth width. The linear distance ratio from the coronal reference plane of FT, Zy, Pn, ULPm, Li, Me' was -1/-1/1/-0.5/0.5/-0.6 respectively. The 3-D facial model of Korean adults with normal occlusion were be constructed using coordinate values and linear measurement values. These data may be used as a reference in 3-D diagnosis and treatment planning for malocclusion and dentofacial deformity patients and applied for 3-D analysis of facial soft tissue changes before and after orthodontic treatment and orthognathic surgery.

ADSL을 위한 전화선로의 특성분석 및 등화기 설계

최성환,전진화,권호열 강원대학교 정보통신연구소 1999 정보통신논문지 Vol.3 No.-

In this paper, we evaluate transmission channel characteristics of telephone cable to be used in general. First, we measured the impedances of open and short circuits in order to obtain the RLCG parameters per unit length of transmission line. And we obtained the frequency-dependent transfer function and propagation constant for transmission line using these values. The channel impulse response is derived from the inverse Fourier of transfer function. We design channel equalizer for ADSL(Asymmetrical Digital Subscriber Line) using the measured impulse response of channel. The results shows that the transfer characteristics decrease sharply according to the length of transmission line. Finally, we verify efficacy of the proposed method by means of simulation.

52 Mbps급 CAP 전송시스템의 모델링과 성능분석

권호열,전진화,김범규 강원대학교 정보통신연구소 1998 정보통신논문지 Vol.2 No.-

Carrierless Amplitude Modulation/Phase Modulation(CAP) has the same spectral characteristics and provides the same theoretical performance as QAM, but is generally less complex to implement digitally. In this paper, a 52 Mbps CAP transceiver system is modeled and simulated according to DAVIC VDSL standard. Also we analyzed error rate characteristics under AWGN channel by using MATLAB.

3차원 레이저 스캔을 이용한 안면 연조직 분석을 위한 계측점의 제안

백형선,이화진,전재민 대한치과교정학회 2006 대한치과교정학회지 Vol.36 No.1

3차원 레이저 스캐너는 두개안면부의 입체적인 영상을 구성할 수 있을 뿐만 아니라 컴퓨터의 조작을 통해 관찰이 용이하도록 원하는 위치로 회전과 축의 조정이 가능하여 면밀한 연조직 분석이 가능하다. 이에 본 연구에서는 Vivid 900 (Minolta, Tokyo, Japan) 3차원 레이저 스캐너와 Rapidform 프로그램 (Inus Technology Inc., Seoul, Korea)을 이용하여 마네킨의 3차원 영상을 채득하여 촬영 과정의 오차를 평가하고 3차원 레이저 스캔 영상의 정밀도 및 확대율을 평가하였으며, 마네킨과 정상교합자, 제Ⅱ급 부정교합자, 제 Ⅲ급 부정교합자의 3차원 레이저 스캔 영상에서 지정이 용이하고 반복 재현성이 높은 연조직 계측점을 제안하고자 하였다. 마네킨을 6회 반복 촬영한 결과 촬영 과정에서의 평균 오차는 X축은 0.16mm, Y축은 0.15mm, Z축은 0.15mm였다. 마네킨의 실측치와 3차원 스캔 영상에서의 계측치를 비교하여 본 결과, 평균오차 0.37mm, 확대율 0.66%로 나타났다. 3차원 스캔 영상에서 마네킨의 오른쪽 연조직 gonion을 제외한 26개의 연조직 계측점의 평균 오차가 2.0mm를 넘지 않았으며, glabella, 연조직 nasion, endocanthion, exocanthion, pronasale, subnasale, nasal alare, upper lip point, cheilion, lower lip point, 연조직 B point, 연조직 pogonion, 연조직 menton, preaurale 등이 평균 오차가 적었다. 제안된 연조직 계측점들은 3차원 레이저 영상에서 반복 재현성이 높고 지정이 용이하며 안면의 해부학적 특징을 나타내주는 점들로 두개안면 구조의 3차원적인 연조직의 분석을 위해 유용하게 사용될 수 있을 것이다. Three-dimensional (3-D) laser scans can provide a 3-D image of the face and it is efficient in examining specific structures of the craniofacial soft tissue. Due to the increasing concerns with the soft tissues and expansion of the treatment range, a need for 3-D soft tissue analysis has become urgent. Therefore, the purpose of this study was to evaluate the scanning error of the Vivid 900 (Minolta, Tokyo, Japan) 3-D laser scanner and Rapidform program (Inus Technology Inc., Seoul, Korea) and to evaluate the mean error and the magnification percentage of the image obtained from 3-D laser scans. in addition, soft tissue landmarks that are easy to designate and reproduce in 3-D images of normal, Class Ⅱ and Class Ⅲ maloccusion patients were obtained. The conclusions are as follows; scanning errors of the Vivid 900 3-D laser scanner using a manikin were 16mm in X axis, 0.15mm in the Y axis, and 0.15mm in the Z axis. In the comparison of actual measurements from the manikin and the 3-D image obtained from the Rapidform program, the mean error was 0.37mm and the magnification was 0.66%. Except for the right soft tissue gonion from 3-D image, errors of all soft tissue landmarks were within 2.0mm. Glabella, soft tissue nasion, endocanthion, exocanthion, pronasale, subnasale, nasal alare, upper lip point, cheilion, lower lip point, soft tissue B point, soft tissue pogonion, soft tissue menton and preaurale had especially small errors. Therefore, the Rapidform program can be considered a clinically efficient tool to produce and measure 3-D images. The soft tissue landmarks proposed above are mostly anatomically important points which are also easily reproducible. These landmarks can be beneficial in 3-D diagnosis and analysis.

미세절제술과 비교 유전자 보합법에 의한 각종 종양에서의 유전자 변화에 관한 연구

구선회,신소영,임춘화,전영미,이윤이,김진만 충남대학교 의과대학 지역사회의학연구소 2000 충남의대잡지 Vol.27 No.2

For the evaluation of oncogenesis, progression and prognosis of cancer, CGH is an important technique, because this technique is economic due to utilization of only one probe and lack of culture, screening mathod of whole genome and possibility of retrospective and prospective study. By the CGH, genornic variation of 20 breast cancer tissues, 23 stomach cancer tissues and 16 bladder cancer tissues were analyzed. The results were as followes ; 1. breast cancers The CGH results showed gains on chromosomes 8q(40%), lq(30%), 17q(15%), 20q(15%), 18q (15%), 5p(15%), and 13q(15%). The Deletions were on chromosomes 17p(45%) and 22q(20%). High-level amplifications(green/red ratio >1.5) were noted on chromosomes 1p31, iq, 3q25-qter, 5p, 7q31-qter, 8q, 9q22-qter, 10p, l1p, 11q22-qter, 12p, 12q24, 14g21-qter, 15q23-qter, 17q, 18p, 18q12-qter, 20p, and 20q. By comparison with infiltrating ductal carcinoma, the two medullary carcinomas showed high-level amplification on chromosomes iq3l, lq, 8q, 10p, 11p and 12p. 2. stomach cancers 1) Usual amplification sites of genome were lq, 13q, 17q, 20p,q. 2) 17p was the most common deletion site. The other sites of the deletion were lq, 4q. 3) In intestinal type of stomach cancer, genomic variation is more common than diffuse type. 4) In the cases of no evidence of lymph node metastasis, deletion of 17p is absent but amplification of 8q is obvious in the case of lymph node metastasis. 3. bladder cancers Common amplification of copy numbers of DNA sequences by CGH were seen at 1q, 3q, 4q, 5p, 6pq, 7p, 8q, 11q, 12q, 13q, 17q, 18q and 20pq(more than 20% of cases). High level amplification was noted at 1p32, 3p2l, 3q24, 4q26, 8q21-ter, 11q14-22, 12q15-21, 12q21-24, 13q 21-31, 17q22, and 18q22. Deletions were noted at 2q21-qter, 4q13-23, 5q, 8p12-22, 9pq, 11p13-15 (more than 20% of cases).