고도보정 공간내삽에 의한 전국의 1km²단위 기상실황 추정

윤진일,이동석,최재연,조성인,박은우,황헌 한국농업정보과학회 1999 농업정보과학 Vol.1 No.1

Conventional method of generating meteorological surfaces over geographic areas often neglects the elevation effect which is considered to be a single most important control over local climate. Deviation of the estimates may exrled practical limits at some areas with complex toprlgraphy. A digital map featuring coordinates and elevation data of 72 weather stations in Korea were joined with hourly weather(trmperature, relative humidity, precipitation and wind speed) observations at the stations by using a geographic information system software. An inverse distanre weighted interpolation was done on the point features to generate prim-itive meteorological and elevation surface grids consisting of 430×600 cells, respectively. Elevation difference at each cell between the United States Geological Survey's 1 km digital elevation model and this virtual ele-vation surface was calculated. Known relationships between meteorological elements and the elevation differ-ence were used to derive "correction grids" representing the potential effects of elevation difference at each grid cell. The correction grids were added or multiplied to the primitive meteorological surfaces to obtain ele-vation-corrected estimates for corresponding elements. This srheme was applied to hourly data of 27 March 1998 to generate the elevation-corrected mrteorological surfaces. Observed data of 350 automated weather sta-tions were used to partially validate the accuracy of the results. This simple scheme sHelved a feasibility of a near-real time generation of hourly meteorological surfaces for temperature and rainfall with an affordable error range.

성격장애 진단준거 개발을 위한 전형성 분석

황순택,조연규,오동열,김창현,양병환 漢陽大學校 精神健康硏究 1994 精神健康硏究 Vol.13 No.-

유착성 견관절낭염의 치료에 대한 방사선학적 평가

윤동환,김희상,안경회,황치문 大韓再活醫學會 1999 Annals of Rehabilitation Medicine Vol.23 No.3

성격장애 진단준거목록의 타당도 연구

황순택,정재홍,조연규,오동렬,김창현,양병환 漢陽大學校 精神健康硏究 1999 精神健康硏究 Vol.18 No.-

헬리컬관외 침전 및 적하 열전달 특성에 관한 연구

황승기,윤상국,김동혁,이승갑 韓國海洋大學校 附設 海洋科學技術硏究所 2001 硏究論文集 Vol.10 No.2

An experimental study is carried out to investigate the cahracteristics of heat transfer of outside helical tubes. The main heat exchanger consists of twelve curved columns with each 300mm diameter and the total length of 1.2m copper tube having an outer diameter of 19.05mm with 1.5mm thickness. Water flows down the outside of helical tube, where flow patterns are the vertical film falling flow, immerged flow, and mixed-flow which is the combination of film falling flow and immerged flow. Refrigerant 11 flows the inside of the tub countercurrently. The experimental range of inside flow rate is 1.7∼3.2ℓ/min. The results are presented as Nusselt number with corresponding Reynolds number for variety of outside and inside flow rates. The heat transfer rates of the mixed flow are 8 to 56% higher than those of film falling flow or immerged flow only. Interpretation of the results is given on the basis of physical reasoning and the correlation equations.

치과용 심미 수복 재료들의 색상 연구를 통한 새로운 치과용 색체계의 제안

오윤정,박수정,김동준,조현구,황윤찬,오원만,황인남 대한치과보존학회 2007 Restorative Dentistry & Endodontics Vol.32 No.1

본 연구는 새로운 치과용 색체계 개발을 목적으로 현재 치과에서 사용되고 있는 Vita shade를 사용하는 9 제조사의 12종의 광중합형 복합레진과 1종의 치과용 도재의 색상을 diffuse/8° 수광 방식을 사용하는 분광색체계 (MiniScan XE plus, Model 4000S, Hunter Lab, USA)를 이용해 D65 표준광과 10도 관찰자 시야 하에서 CIE L^(*)a^(*)b^(*) 값을 측정하고 색상 범위를 분석하였다. 분석한 정보를 color sorting system을 응용한 CNU Cons Dental Color Chart의 색상 표현 방식인 T###에 치과용 수복 재료들의 범위를 적용하여 다음의 결과를 얻었다. 측정된 L^(*)a^(*)b^(*)값의 분포를 분석해 보면 L^(*)값은 80.40과 52.70 사이에, a^(*)값은 10.60과-3.60 사이에, 그리고 b^(*)값은 28.40과 2.21 사이에 분포한다. L^(*)값의 평균값은 67.40, 중앙값은 67.30이며, a^(*)값은 2.89와 2.91, b^(*)값은 14.30 과 13.90 이다. 이러한 분석을 토대로 CNU Cons Dental Color Chart의 T###의 첫 번째 숫자에 해당하는 L^(*)값의 각 숫자간의 차이는 2.0으로, 그리고 2번째 숫자인 a^(*)값의 각 숫자간의 차이는 1, 그리고 세 번째 숫자인 b^(*)값의 각 숫자간의 차이는 2로 정하였다. T555에 해당하는 L^(*)값의 범위는 66.0이상, 68.0미만으로, a^(*)값의 범위는 3이상 4미만으로, b^(*)값의 범위는 14이상 16미만으로 결정하였다. The purpose of this study is to develope new dental color-space system. Twelve kinds of dental composites and one kind of dental porcelain were used in this study. Disk samples (15 ㎜ in diameter, 4 ㎜ in thickness) of used materials were made and sample’s CIE L^(*)a^(*)b^(*) value was measured by Spectrocolorimeter (MiniScan XE plus, Model 4000S, diffuse/8° viewing mode, 14.3 ㎜ Port diameters, Hunter Lab. USA). The range of measured color distribution was analyzed. All the data were applied in the form of T### which is expression unit in CNU Cons Dental Color Chart. The value of L^(*) lies between 80.40 and 52.70. The value of a^(*) are between 10.60 and 3.60 and b^(*) are between 28.40 and 2.21. The average value of L^(*) is 67.40, and median value is 67.30. The value of a^(*) are 2.89 and 2.91 respectively. And for the b^(*), 14.30 and 13.90 were obtained. The data were converted to T### that is the unit count system in CNU-Cons Dental Color Chart. The value of L^(*) is converted in the first digit of the numbering system. Each unit is 2.0 measured values. The second digit is the value of a^(*) and is converted new number by 1.0 measured value. For the third digit b^(*) is replaced and it is 2.0 measured unit apart. T555 was set to the value of L^(*) ranging from 66.0 to 68.0, value of a^(*) ranging from 3 to 4 and b^(*) value ranging from 14 to 16.

상아세관의 주행방향에 따른 상아질 접착제의 침투양상에 대한 공초점레이저주사현미경 연구

김동준,황윤찬,김선호,오원만,황인남 大韓齒科保存學會 2003 Restorative Dentistry & Endodontics Vol.28 No.5

The purpose of this study was to evaluate the penetration pattern of dentin adhesives according to the orientation of dentinal tubules with confocal laser scanning microscopy. Specimens having perpendicular. parallel and oblique surface to dentinal tubules were fabricated. The primer of dentin adhesives (ALL BOND 2, CLEARFIL SE BOND and PQ1) was mixed with fluorescent material. rhodamine B isothio cyanate (Aldrich Cherm. CO., Milw., USA), It was applied to the specimens according to the instructions of manufactures. The specimens were covered with composite resin (Estelite, shade A2) and then cut to a thickness of 500 ㎛ with low speed saw (Isomet, Buehler, USA). The adhesive pattern of dentin adhesives were observed by fluorescence image using confocal laser scanning microscopy. The results were as follows. 1. For the groups with tubules perpendicular to bonded surface, funnel shape of resin tag was observed in all specimen. However. resin tags were more prominent in phosphoric acid etching system (ALL BOND 2 and PQ1) than self etching system (CLEARFIL SE BOND). 2. For the groups with tubules parallel to bonded surface. rhodamine labeled primer penetrated into peritubular dentin parallel to the orientation of dentinal tubules. But rhodamine labeled primer of PQ1 diffused more radially into surrounding intertubular dentin than other dentin adhesive systems. 3. For the groups with tubules oblique to bonded surface. resin tags appeared irregular and discontinuous. But they penetrated deeper into dentinal tubules than other groups.

콘택트렌즈 보존 용기 유래 Acanthamoeba lugdunensis KA/L5주의 내공생세균

정동일,공현희,김태호,황미열,유학선,윤호철,설성용 경북대학교 의학연구소 1999 경북대학교병원의학연구소논문집 Vol.3 No.1

콘택트렌즈 보존 용기 유래 가시아메바 KA/L5주의 세포질 내에 존재하는 bacterial endosymbiont(내공생세균)를 투과전자현미경으로 관찰하여 확인하였다. 숙주인 가시아메바 KA/L5주는 형태학적으로 제2군에 속하였고, rDNA PCR-RFLP 결과 A. lugdunensis로 동정되었다. 미토콘드리아 DNA RFLP와 동위효소 분석상 이 충주는 국내 콘택트렌즈 보존용기에서 가장흔히 분리되는 type인 KA/Ll주, 국내 임상 분리주 중 하나인 KA/E2주, 내공생세균을 가지는 것으로 보고된 병원 냉각수 유래 KA/W4주 및 L3a주와 동일하거나 매우 유사한 성적을 보였다. 내공생세균은 약 1.38× 0.507㎛의 크기였고, 아메바 세포질 내에 불규칙하게 분포하고 있었으며. 그 표면에 아메바의 ribosome이 부착되어 있었다. 내공생세균을 둘러싼 lacunae나 막과 같은 구조는 관찰되지 않았다. Legionella 특이 primer를 이용한 효소중합반응(PCR)에서 내공생세균의 염색체 DNA는 증폭되지 않았다. A. lugdunensis의 우리말 이름을 담수가시아메바로 제안한다. Transmission electron microscopy of an Acanthamieba isolate (KA/L5) from a contact lens case revealed bacterial endosymbionts within cytoplasm of the amoebae, The Acanthamoeba isolate belonged to the morphological group II. Based on the polymerase chain reaction (PCR) - restriction fragment length Polymorphism (RFLP) of 18S ribosomal RNA coding DNA (rDNA), the Isolate was identified as A. lugdunensis. Strain typing by isoenzyme analysis using isoelectric focusing (IEF) and mitochondrial (Mt) DNA RFLP revealed that the isolate was closely related with KA/Ll , the most predominant type of isolates from contact lens storage cases, KA/E2, a clinical isolate, KA/W4, preciously reported to host endosymbionts, and L3a strains of A. lugdunensis. The endosymbionts were similar to those of KA/W4 In aspects that they were randomly distributed in both trophozoites and cysts, and were rod-shaped bacteria measuring approximately 1.38x 0.50㎛. But the number of endosymbionts per amoeba was significantly lower than that of KA/W4. They were neither limited by phagosomal membranes nor included In lacunae- like structure.

상아세관의 주행방향에 따른 상아질 접착제의 침투양상에 대한 공초점레이저주사현미경적 연구

김동준,황윤찬,김선호,오원만,황인남 전남대학교 치의학연구소 2003 구강과학 Vol.15 No.1

The purpose of this study was to evaluate the penetration pattern of dentin adhesives according to the orientation of dentinal tubules with confocal laser scanning microscopy Specimens having perpendicular, parallel and oblique surface to dentinal tubules were fabricated. The primer of dentin adhesives (ALL BOND�2, CLEARFIL^(TM) SE BOND and PQ1) was mixed with fluorescent material, rhodamine B isothiocyanate (Aldrich Chem. CO., Milw., USA). It was applied to the specimens according to the instructions of manufactures. The specimens were covered with composite resin (Estelite, shade A2) and then cut to a thickness of 500 ㎛ with low speed saw (Isomet^(TM), Buehler, USA). The adhesive pattern of dentin adhesives were observed by fluorescence imaging using confocal laser scanning microscopy. The results were as follows. 1. For the groups with tubules perpendicular to bonded surface, funnel shape of resin tag was observed in all specimen. However, resin tags were more prominent in phosphoric acid etching system (ALL BOND� 2 and PQ1) than self etching system (CLEARFIL^(TM) SE BOND). 2. For the groups with tubules parallel to bonded surface, rhodamine-labeled primer penetrated into peritubular dentin parallel to the orientation of dentinal tubules. But rhodamine-labeled primer of PQ1 diffused more radially into surrounding intertubular dentin than other dentin adhesive systems. 3. For the groups with tubules oblique to bonded surface, resin tags appeared irregular and discontinuous. But they penetrated deeper into dentinal tubules than other groups.

터어키안 종양의 경접형골 수술례에 대한 임상분석

신동익,고영초,조맹기,황도윤 대한신경외과학회 1993 Journal of Korean neurosurgical society Vol.22 No.1

The most common severe cervical spine injury involving the posterior elements is subluxation or dislocation in which the posterior ligamentus complex is completely tom. Late instability is more common than previously realized, because ligamentous structures do not reconstitute normally. even with prolonged external rigid fixation. Subluxation of the cervical vertebrae in a flexion injury can be reduced by skeletal traction ; however, they usually require posterior stabilization. Unilateral and bilateral facet dislocation freqently require open reduction and posterior stabilization. The authors have used interlaminar clamps for the stabilization of thirty cases of unstable cervical spine. Advantages of this method are 1) immediate and rigid stabilization without cord injury. 2) early ambulation and prevention of respiratory complication and pressure sore. And also, posterior cervical stabilization with Halifax clamps is an easier, safer and faster technology in treatment of unstable spine.