산전초음파에서 발견된 기형의 계통별 진단 임신 주수의 차이

이병관,김선미,홍준석,심순섭,박중심,전종관,윤보현,신희철 대한산부인과초음파학회 2003 대한산부인과초음파학회지 Vol.5 No.2

전방 천골 수막류 - 증 례 보 고 -

박준석,신원한,김범태,변박장,최순관 대한신경외과학회 1998 Journal of Korean neurosurgical society Vol.27 No.11

산업부산물을 이용한 중금속/유기성 슬러지의 고형화 및 용출특성에 관한 연구

전관수,김인환 嶺南大學校 工業技術硏究所 2004 工業技術硏究所論文集 Vol.32 No.1

This paper discusses the development of mixes for silica fume as stabilization/solidification agents and binders for industrial wastewater residue containing organic and heavy metal contaminants. The UCS(Unconfined Compressive Strength) gradually increased to 66.7% as the silicafume content increased to 15%. The leaching of TOC and chromium decreased as more OPC was substituted with silica fume. When the mix had 5% silica fume, it retained about 85% TOC, and chromium leached out 0.76mg-Cr/g-Cr in acidic solution. Also, microstructural studies of the solidified wastes through the scanning electron microscopy/energy dispersive spectroscopy (SEM/EDS) and X-ray diffraction analysis showed that the silica fume caused an inhibition to the ettringite formation which did not contribute to setting, but coated the cement particles and retarded the setting reactions. The results indicated that the incorporation of silica fume into the cement matrix minimized the detrimental effects of organic materials on the cement hydration reaction and contaminant leachability.

成長期 어린이의 步行狀態分析

田寬錫,洪盛杓 忠南大學校體育科學硏究所 1984 體育科學硏究誌 Vol.2 No.1

In order to comprehend the walking situations of the children in a growing period and to offer basic materials for a right walking guidance, I measured and analysed the step angles and vertical difference between both steps of a primary school's students (mas.: 380 persons, fem.: 340 persons). The following results were obtained ; 1. According to the measurement of step angles and vertical difference between both steps and its analysis, there were no changes by ages. 2. In the walking angles, a right foot is more foot -outside lined than a left one, and boys are more foot - outside lined than girls. 3. Boy students walk more widely than girl students in vertical difference between both steps. 4. While walking, children whose both feet are foot- inside lined and overlap each other, and whose both feet are foot-inside and are open, are much more. 5. A walking habit of child remains unchanged up to adult.

JDBC를 이용한 Web-GIS 구현

전홍구,최관순,공용해 순천향대학교 부설 산업기술연구소 1999 순천향 산업기술연구소논문집 Vol.5 No.2

GIS is evolving from a technology that addresses specific applications to a broad-based information system. Its value goes beyond increased efficiency, cost savings. Therefor GIS will be fundamental to the future on the internet. But our organizations and societies exclusively handle geographic informations in Korea. and they use independently foregin commercial GIS softwares. It makses difficult to accmulate local techniques in GIS. In order to solve this problem we implement WEB-GIS using JDBC without depening specific software.

송풍 및 교반속도가 음식쓰레기 고속퇴비화에 미치는 영향

전관수 嶺南大學校 環境問題硏究所 1995 環境硏究 Vol.15 No.1

음식쓰레기 고속퇴비화 장치의 개발을 위해 적정 운전조건을 조사하였다. 일반적인 퇴비화의 운전조건에 대해서는 국내외적으로 많은 연구결과들이 제시되고 있으나 고속퇴비화기기에 대해서는 연구결과의 발표가 미흡한 형편이다. 고속화퇴비기기에서는 연속적인 음식쓰레기의 공급과 교반이 행해지며 별도의 수분조절제를 첨가하지 않는 것이 경제적이므로 이에 따른 최적의 공기공급속도와 교반속도는 통상의 퇴비화와는 상이한 결과를 보일 수 있다. 본 연구의 결과 적정 공기량은 함수량의 변화에 따라 다르겠지만 2lℓof air/kg of food waste 이상은 되어야 안정한 퇴비화가 가능한 것으로 나타났다. 또한 교반속도는 공기량보다 퇴비화에 미치는 영향이 더 큰 것으로 사료되며, 대체적으로 회전축의 회전속도 증가에 따라 퇴비화의 진행정도가 비례하여 퇴비의 인발횟수를 줄이고 안정된 퇴비를 얻기 위해서는 2rpm 이상의 교반속도가 필요하였다. The optimum operation conditions for composting the garbage and food wastes were investigated using high rate composter. Previous studies were mainly focussed on the operating conditions for conventional composting process. The results obtained from the high rate composter were considerably different from those of the conventional process, since the continuous feeding and agitation were conducted, and bulking agent was reduced. In this study, 2lℓof air/kg of food water/min of aeration rate was proper for full aerobic composting. Composting efficiency was improved as the agitation rate increased. The agitation of about 2 rpm was necessary for stabilized compost in high rate composter.

물구나무서기 Performance와 運動能力과의 關係에 對한 硏究

田寬錫,李鐘虎 忠南大學校體育科學硏究所 1986 體育科學硏究誌 Vol.4 No.1

A study on the relationship between the performance of hand standing and the basic physical fitness for sports . This research program was planned to study the relation - ship between their abilities for “hand_standing" and their physical fitnecs for other activities in general Through the two recording tests, 1 came to the conclusions as follows : 1. The result from the second test is quite similiar with that from the firstone. except in the records of their ability to sit- ups on the ground. 2. The stature and weight don't have any immediate relation with their abilities for pull -ups, vertical-jumps. and sit- ups. However. it is evident that they are quite slightly related with one another. 3. It is admittable that there are something quite related with one another. in their abilities for pull-ups. sit-ups , vertical- jumps. and hand standings on the wall.

EG-모드 마이크로스트립 아이소레이터에 관한 연구

田啓石,丁寬秀,金容平 慶熙大學校 1980 論文集 Vol.10 No.-

In X-band, a edge-guided(EG) mode microstrip isolator is designed in which nonreciprocal attenuation is due to the ferromagnetic resonance absorption caused by a strong d-e magnetic field applied locally at the shorted edge of a ferrite microstrip. From modal analysis. the dominant EG mode has been shown to propagate alone the microstrip with one edge shorted to the ground plane. Dispersion relations and rf electric field distributions have been calculated numerically. And the upper limit and the cutoff frequency of band width have been discussed with several design parameters. A practical EG-mode microstrip isolator based on these results has been successfully designed, which has more than 25dB isolation.

로보트 매니퓰레이터에 대한 강건한 적응제어기 설계

安秀寬,朴世勝,裵悛坰,朴鍾國 慶熙大學校 1989 論文集 Vol.18 No.-

In this paper a new adaptive control algorithm is derived, with the unknown manipulator and payload parameters being estimated online. In pratice, we may simplify the algorithm by not explicitly all unknown parameters. Futher, the controller must be robust to residual time - varying disturbance, such as stiction or torque ripple. Also, the reference model is a simple double integrator and the acceleration input for robot manipulator consists of a proportion and derivative controller for trajectory tracking purposes. The validity of this control is confirmed in simulation where two - link robot manipulator shows the robust performances in spite of the existing nonlinear interaction and unknown parameter changes.

자동차차체 및 부품제조업 산업장의 작업환경실태에 관한 조사 연구

서준호,문덕환,김정호,이채관,황용식,손병철,김대환,이창희,김휘동,이채언 인제대학교 백병원 2002 仁濟醫學 Vol.23 No.5

Objectives: For the purpose of preparing the fundamental data and control the working environment and assessing the status of working environmental in manufacturing industry of bodies for motor car and of parts. Methods and Materials: Accessories for motor car and its engines the auther measured the noise level, concentration of dust, heavymetals, organic solvents, chemicals to 99 industries(24 working processes) form Feb. 2000 to Oec. 2000. Results: The results were as follows : 1. Mean noise level cutting, grinding, pressing, foundries and shot-blast was exceeded to threshold limit value(TLV) of noise. 2. Mean concentration of total dust was not exceeded to TLV. 3. Mean concentration of Mn in welding process and Pb in drying, welding, fabricating, rolling was exceeded to TLV. 4. Mean concentration for chemicals and organic solvents were not exceeded to TLV. 5. Mean concentration of dust and heavymetals were statistical significant difference between with local ventilation system and without local ventilation system. Conclusion: Above results, author suggest to prepare more passively control to working environment where exceeded the TLV.