http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
홍정오,김문겸 한국벤처창업학회 2022 벤처창업연구 Vol.17 No.3
현재 국내 액셀러레이터 시장에서 공공 액셀러레이터의 역할이 점차 확대되고 있다. 이에 따라 향후 정책의 수립을 위해 공공 액셀러레이터의 투자효과를 점검하고 그 타당성을 검증할 필요가 있다. 그러나 국내 액셀러레이터는 그 역사가 짧고 정량적인 자료가 공개되지 않고 있어 액셀러레이터에 관한 재무데이터를 활용한 정량적 연구가 부재한 것이 현실이다. 이에 본 연구는 공공 액셀러레이터의 투자가 스타트업에 미치는 효과를 확인하기 위해 실제 공공 액셀러레이터의 지분투자를 받은 스타트업의 재무데이터를 가지고 실증분석을 진행하였다. 2016년부터 2020년까지 5년간 공공 액셀러레이터가 투자한 112개 스타트업의 재무데이터를 사용하여 회귀분석을 진행하였다. 실증분석결과 첫째, 공공 액셀러레이터의 초기투자가 스타트업에 대한 성장성과 수익성에 영향을 미치는 것으로 나타났다. 세부적으로 살펴보면 공공 액셀러레이터의 초기투자가 성장성 지표인 매출액 증가율과 총자산증가율에 정(+)의 영향을 미치는 것을 확인하였다. 둘째, 공공 액셀러레이터의 공동투자가 성장성보다는 수익성 지표인 매출액이익률에 유의한 정(+)의 영향을 미치는 것으로 나타났다. 본 연구를 통해 유의미한 결과를 보인 초기 스타트업에 대한 투자를 지속적으로 확대하고 공공 액셀러레이터의 강점인 지원 사업을 결합한다면 스타트업의 성장에 더욱 큰 힘이 될 것으로 생각한다. 본 연구를 통하여 공공 액셀러레이터의 투자 성과를 확인하였으므로 향후 공공 액셀러레이터 사업은 민간 액셀러레이터들의 미흡한 부분을 보완함과 동시에 민간과의 공동투자를 통해 스타트업의 성과를 제고하는 방향의 정책 추진이 필요한 것으로 판단된다.
홍정오,김상혁,허강헌 한국세라믹학회 2009 한국세라믹학회지 Vol.46 No.2
MLCC (Multi-layer Ceramic Capacitor) is the most important passive component in electronic devices such as HHP, PC and digital display. The development trend of MLCC is a miniaturization with increasing the capacitance. In this paper, a development history of the high capacitance MLCC in Korea was introduced, and the necessity of the finer BaTiO₃ was explained in the viewpoint of the issued electrical and dielectric properties of high capacitance MLCC. The bottleneck technologies to realize the high capacitance was shortly introduced, followed by the prediction of the development trend of MLCC in near future. MLCC (Multi-layer Ceramic Capacitor) is the most important passive component in electronic devices such as HHP, PC and digital display. The development trend of MLCC is a miniaturization with increasing the capacitance. In this paper, a development history of the high capacitance MLCC in Korea was introduced, and the necessity of the finer BaTiO₃ was explained in the viewpoint of the issued electrical and dielectric properties of high capacitance MLCC. The bottleneck technologies to realize the high capacitance was shortly introduced, followed by the prediction of the development trend of MLCC in near future.
2-유로 카트리지 밸브를 이용한 유압용 유량 센서의 개발
홍예선,이정오 대한기계학회 1993 대한기계학회논문집 Vol.17 No.9
In this paper the design and test results of a dynamic flow rate sensor was reported. This sensor comprises an 2-way cartridge valve as standard hydraulic component and a displacement sensor. Its working principle bases on the linear relationship between the flow rate and the piston displacement of 2-way cartridge valves under constant pressure drop. This principle is well known, however it is not easy to develop a flow rate sensor with the measurement range of 300 1/min, pressure loss of less than 8 bar at 300 1/min, maximum linearity error of less than $\pm$1% and the maximum rising time of 10 ms. This paper describes the design procedure of the flow rate sensor, the improvement procedure of static performance and test method and results of dynamic performance.
복숭아혹진딧물에 대한 포스핀 및 에틸포메이트 훈증제 감수성 평가
박정선,김봉수,홍지혜,이병호,양정오 한국응용곤충학회 2017 한국응용곤충학회 학술대회논문집 Vol.2017 No.10
주요 농업해충인 복숭아혹진딧물 약충과 성충을 대상으로 포스핀 및 에틸포메이트 훈증제에 대한 감수성 평가를수행하였다. 포스핀은 6개 농도(0.025, 0.051, 0.099, 0.501, 0.999 및 2.001 mg/L)를 처리하였으며, 그 결과 0.099 mg/L에서약충과 성충은 각각 39.3%, 44.9%의 살충률을 보였으며, 두 태 모두 0.501 mg/L 이상 처리구에서는 100% 사망하여포스핀을 대상으로 한 약충과 성충의 LCT50 값은 각각 1.983, 1.845 mg h/L임을 확인하였다. 에틸포메이트 처리는약충은 7개 농도(0.45, 2.55, 3.98, 5.03, 9.77, 15.03 및 20.29 mg/L), 성충은 6개 농도(1.05, 2.03, 3.01, 4.06, 5.03 및9.77 mg/L)를 처리하였으며, 그 결과 5.03 mg/L에서 약충과 성충은 각각 95.6, 96.7%의 살충률을 보였으며, 9.77mg/L 이상 처리시 100% 사망하여 에틸포메이트를 대상으로 한 LCT50 값은 각각 1.593, 2.295 mg h/L임을 확인하였다.
Homologous 산화물 Zn<sub>k</sub>In<sub>2</sub>O<sub>3+k</sub>(k=1∼9)의 열전 특성
남윤선,최정규,홍정오,이영호,이명현,서원선,Nam, Yun-Sun,Choi, Joung-Kyu,Hong, Jeong-Oh,Lee, Young-Ho,Lee, Myung-Hyun,Seo, Won-Seon 한국재료학회 2003 한국재료학회지 Vol.13 No.8
In order to investigate the thermoelectric properties of $Zn_{k}$ $In_2$$O_{ 3+k}$ homologous compounds, the samples of $Zn_{k}$ /$In_2$$O_{3+k}$ / (k = integer between 1 and 9) were prepared by calcining the mixed powders of ZnO and $In_2$$O_3$fellowed by sintering at 1823 K for 2 hours in air, and their electrical conductivities and Seebeck coefficients were measured as a function of temperature in the range of 500 K to 1150 K. X-ray diffraction analysis of the sintered samples clarified that single-phase specimens were obtained for $Zn_{k} /$In_2$$O_{3+k}$ with k = 3, 4, 5, 7, 8, 9. Electrical conductivity of the $Zn_{k}$ $In_2$$O_{3+k}$ / decreased with increasing temperature, and decreased with increasing k for k $\geq$ 3. The Seebeck coefficient was negative at all the temperatures for all compositions, confirming that $Zn_{k}$ $In_2$$O_{3+k}$ / is an n-type semiconductor. Absolute values of the Seebeck coefficient increased linearly with increasing temperature and increased with increasing k for k $\geq$ 3. The temperature dependence of the Seebeck coefficient indicated that Z $n_{k}$I $n_2$ $O_{3+k}$ could be treated as an extrinsic degenerate semiconductor. Figure-of-merits of Z $n_{k}$I $n_2$ $O_{3+k}$ were evaluated from the measured electrical conductivity and Seebeck coefficient, and the reported thermal conductivity. Z $n_{7}$ I $n_2$ $O_{10}$ has the largest figure-of-merit over all the temperatures, and its highest value was $1.5{\times}$10$^{-4}$ $K^{-1}$ at 1145 K.5 K.