http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이승준,신인동,최수창,김용우,이종렬,이득우,Lee, Seung-Jun,Shin, In-Dong,Cha, Sao-Chang,Kim, Yong-Woo,Lee, Jong-Ryul,Lee, Deug-Woo 한국생산제조학회 2010 한국생산제조학회지 Vol.10 No.6
The development of high-speed spindle have been studied extensively for micro machining in advanced industrial countries. The research of miniaturized high-speed air spindle is important part which needs for the micro machining process of high quality. So, This study was to carry out results about design characteristics of miniaturized high-speed air spindle. We had designed 4type turbines and shaft. They were simulated in use the computer simulation programs. We made them as products. They measured RPM (revolutions per minute). As a result of experiments, there was a contrast among 4type Turbines. it reached 384,000rpm in 4.5bar of air pressure. And, We tried to compare the results of measurement whit the results of computer simulation.
중심 압축력을 받는 각형강관기둥 베이스플레이트의 지압응력과 설계에 대한 연구
이승준,김정현,Lee, Seung Joon,Kim, Jeong Hyun 한국강구조학회 2004 韓國鋼構造學會 論文集 Vol.16 No.4
본 연구에서는 중심축하중을 받는 각형강관기둥의 베이스플레이트의 지압응력의 분포와 설계에 대하여 조사하였다. 일반적으로 강구조 기둥의 베이스플레이트는 지압응력이 등분포하다고 가정하고 그 크기와 두께를 결정한다. 그러나 축하중이 적으면 베이스플레이트의 크기도 작아지고 두께도 얇아지며 지압응력은 등분포하게 되지 않으며 기둥단면의 하부에 집중된다. 본 연구에서는 실험적 방법과 해석적 방법으로 지압응력의 분포에 대하여 조사하고 그 결과를 이용하여 설계법을 검토하였다. 4개의 각형강관기둥 베이스플레이트 시험체를 제작하여 실험을 수행하였다. 또한 유한요소해석프로그램인 ANSYS를 이용하여 베이스플레이트의 지압응력의 분포를 해석하였다. 연구결과 축하중이 적은 경우 지압응력은 기둥단면의 하부에 집중되고 등분포하지 않으므로 유효폭의 개념을 이용하여 베이스플레이트를 설계하는 방법이 적절함을 나타내었다. In this study, the bearing pressure distribution and design method of rectangular steel tubular column base plates under concentric loading were investigated. In general, the size and thickness of the baseplate are determined with the assumption that the bearing pressure of the column baseplate is uniformly distributed. When the column is loaded lightly, however, the size of the baseplate becomes smaller, the thickness becomes thinner and the bearing pressure of the baseplate is not distributed evenly. In this study, the distribution of the bearing pressure was investigated using the experimental and analytical methods. Four test specimens of the rectangular steel column baseplate were fabricated and tested. The analysis of the specimens was done using the finite element analysis program ANSYS. The result was that it was appropriate to use the effective width method to design the lightly loaded column baseplate, because the bearing pressure was not distributed evenly and was only concentrated under the column section.
이승준,구민세,정란,신동기,Lee, Seung-Joon,Koo, Min-Se,Chung, Lan,Shin, Dong-Ki 한국전산구조공학회 1991 전산구조공학 Vol.4 No.3
내진설계를 하고 있는 나라들이 채택하고 있는 내진해석방법중 가장 일반적인 응답스펙트럽법(Response Spectrum Method)은 지진하중을 정적 수평하중으로 치환하여 정적해석하는 것을 기본으로 하고 있다. 여기서 계산된 대치수평하중은 구조물의 소성화에 따른 비선형거동으로 부터 오는 에너지분산현상 및 감쇠(damping)현상 등을 고려하기 위하여 소위 반응수정계수(behavior factor)란 일정수로 나누어 준다. 응답스펙트럼법에 의한 내진설계의 정확도를 좌우하는 지금까지 사용되어지고 있는 반응수정계수는 정확한 계산값들이 아닌 경험적인 값들이다. 반응수정계수를 해석적으로 결정하기 위해서는 구조물의 극한상태에 대한 정의가 선결되어져야 한다. 본 논문에서는 지진하중하에서 강구조물의 한계상태를 기하학적측면과 사용성 측면 및 재료공학적 측면에서 검토하였고 3가지 형태의 구조물을 모델로 하여 반응수정계수를 계산하였다. The procedure of the elastic response spectrum method which is used in the codes of many countries involves the computation of a static horizontal substitute loading resulting from the earthquake. The substitute loading is divided by a behavioral factor in order to take energy dissipation due to the real nonlinear structural behavior and damping effects ect. into account. The behavioral factors widely used in many countries are based not on the exact calculation but only on the empirical data. In order to determine the behavioral factors analytically, it is necessary to define the limit state of structures as a first step. In this work, the methods of the determination of limit state for the steel structures are discussed in the geometric, serviceabile and material apsects, and the behavioral factors for the three types of structures are calculated.
연행작용을 고려한 우면산 토석류 모의 매개변수 특성분석
이승준,안현욱,김민석,임현택,Lee, Seungjun,An, Hyunuk,Kim, Minseok,Lim, Hyuntaek 한국수자원학회 2020 한국수자원학회논문집 Vol.53 No.9
The shallow landslide-trigerred debris flow in hillslope catchments is the primary geological phenomenon that drives landscape changes and therefore imposes risks as a natural hazard. In particular, debris flows occurring in urban areas can result to substantial damages to properties and human injuries during the flow and sediment transport process. To alleviate the damages as a result of these debris flow, analytical models for flow and damage prediction are of significant importance. However, the analysis of debris flow model parameters is not yet sufficient, and the analysis of the entrainment, which has a significant influence on the flow process and the damage extent, is still incomplete. In this study, the effects of erosion and erosion process on the flow and the impact area due to the change in the soil parameters are analyzed using Deb2D model, a flow analysis model of debris developed in Korea. The research is conducted for the case of the Mt. Umyeon landslide in 2011. The resulting impacted area, total debris-flow volume, maximum velocity and inundated depth from the Erosion model are compared to the field survey data. Also, the effect of the entrainment changing parameters is analyzed through the erosion shape and depth. The debris flow simulation for the Raemian and Shindong apartment catchment with the consideration of entrainment effect and erosion has been successful. Each parameter sensitivity could be analyzed through sensitivity analysis for the two basins based on the change in parameters, which indicates the necessity of parameter estimation.
이승준,김원기,서동훈,Lee, Seung Joon,Kim, Won Ki,Seo, Dong Hoon 한국강구조학회 1997 韓國鋼構造學會 論文集 Vol.9 No.2
접합부 패널존의 거동에 영향을 줄 수 있는 변수를 고려하여 SRC 기둥-H형강보 접합부의 역학적 특성에 대해 실험적 연구를 하였다. 7개의 시험체를 제작하여 실험을 수행하였으며 실험으로부터 접합부의 전단강도와 이력거동을 조사하였고 파괴형태에 대하여 분석하였다. 접합부의 이력거동은 약간의 핀칭을 보이는 안정된 거동을 보였다. 이력거동은 최대하중에 도달한 후 변위를 증가할 때 내력이 감소하는 거동을 보였다. 접합부 패널존의 전단강도는 접합부내의 콘크리트 유효면적이 증가함에 따라 증가함을 보였다. 접합부 패널존의 전단강조는 철골기둥 웨브의 항복강도, 패널존내의 철골기둥 플랜지의 소성휨강도 그리고 유효콘크리트의 전단강도의 합으로 표현되며 실험결과는 이러한 접합부의 전단강도와 근사한 값을 보였다. To investigate the shear strength and hysteretic behavior of SRC column to H steel beam joints, seven cruciform specimens were fabricated and tested. The test specimens showed stable hysteresis behavior with a little pinching. The strength decreased with increase in deflection after the speciemens reached at the maximum strength. The shear strength of panel zones increased with increased in the concrete amount of SRC column sections. The shear strength may conservatively be estimated by the sum of shear yielding strength of steel column web, plastic bending strength of steel column flange and ultimate shear strength of concrete in the panel zone.