정전 고속 미스트 엘리미네이터의 포집 효율 특성

김진선,김학준,한방우,우창규,김용진,이상린,문상철,Kim, Jin-seon,Kim, Hak-Joon,Han, Bangwoo,Woo, Chang Gyu,Kim, Yong-Jin,Lee, Sangrin,Moon, Sangchul 한국입자에어로졸학회 2018 Particle and Aerosol Research Vol.14 No.4

In this study, we developed a flat-plate type wet electrostatic precipitator that generates stable corona discharge compared to wire type discharge electrode. In order to compare the particle removal efficiency according to the shape of the discharge electrode such as the variation of the horizontal and vertical distance between spiked edges, and the variation of the height of discharge pin support were tested. As a result, when the horizontal distance between spiked edges was increased up to 36 mm, the vertical distance between spiked edges was increased up to 54 mm, and the height of the discharge pin support was increased up to 76 mm, the removal efficiency of PM10 was maintained at approximate 60.0%. Furthermore, the removal efficiency of particles over $5{\mu}m$ was about 80% or more. When the flow rate was 4 m/s, the gap between collection plates was 60 mm, and -14 kV was applied to the discharge electrode. The particle removal efficiency of the flat-plate type electrostatic precipitator was maintained when the horizontal and vertical distance between spiked edges, and the height of the discharge pin support was below a certain level. Those variables may be the important design factors for the shape of the discharge electrode. Therefore, when designing the electrostatic precipitator with multiple channels, the horizontal and vertical distance between spiked edges, and the height of discharge pin support must be selected in consideration of the weight of the discharge electrode and the processing cost.

Effect of Presurgical Nasoalveolar Molding in Unilateral Cleft Lip and Palate Infants

김진선,김영진,남순현,김현정,Kim, Jin-Sun,Kim, Young-Jin,Nam, Soon-Hyeun,Kim, Hyun-Jung Korean Academy of Pediatric Dentistry 2013 大韓小兒齒科學會誌 Vol.40 No.3

구순구개열은 얼굴에 발생하는 다양한 종류의 기형 중 빈번히 발생하는 기형으로, 발생 빈도는 일반적으로 1000명당 0.28~3.74명으로 알려져 있으나 파열의 종류, 인종 및 성별에 따라 큰 차이를 보인다. 구순구개열의 치료는 수술영역에서 많은 발전이 있었지만 수술만으로는 문제점을 해결하기는 어렵다. 파열부 간격을 줄이고 구순열 수술을 용이하게 하기 위한 술전 신생아 정형술의 개념이 1950년 McNeil에 의해 개발되었으며, 최근에는 술전 비치조 정형장치(presurgical nasoalveolar molding appliance, PNAM)를 사용하여 치조골뿐만 아니라 코의 모양을 정상화하려는 시도가 이루어지고 있다. 세 명의 환자가 편측성 구순구개열로 진단받은 후 술전비치조정형장치 장착을 위해 의뢰되었다. 레진과 교정용와이어를 이용하여 제작한 K-NAM 장치물을 입술 성형 수술을 시행하기 전까지 장착하였다. 첫 내원시와 nasal molding을 시행하여 입술 성형 수술을 하기 직전, 입술 성형 수술 이후 콧구멍의 높이, 너비, 비주의 각도를 측정하여 비교한 결과 세 증례에서 모두 코의 대칭성이 증가하며 술 후 심미개선에 효과적임을 알 수 있었다. K-NAM 장치물은 장치의 장착, 유지, 조절이 용이하고 장착한 상태에서 수유가 가능하기 때문에 장착시간을 증가시킬 수 있다. 따라서 nasal molding이 가능한 한정된 기간 안에 최대의 효과를 기대할 수 있다. 그리고 젖병을 빠는 행위가 가능해짐으로써 동시에 구강조직의 발달에도 도움을 줄 수 있을 것이라 생각한다. Cleft lip and palate, the most common craniofacial anomalies, are severe congenital defects that have an incidence of 0.28 to 3.74 per 1000 live births. Although there has been great improvement in the field of cleft surgery, surgical approach cannot be the single solution to resolve the various problems encountered in patients with cleft lip and palate. The concept of presurgical infant orthopedics (PSIO) for gradual closure of the cleft gap and simplified surgical performance was first introduced by McNeil in 1950. Recently, there are many attempts not only to approximate the alveolar segments but also to reshape the nasal cartilage. Three infants with unilateral cleft lip and palate were referred from the department of Plastic Surgery for presurgical nasoalveolar molding (PNAM). Maxillary appliances using resin with orthodontic wire were fabricated. Then these appliance was applied until patients underwent lip surgery. In all cases, the patients could wear the appliance all day since they were able to eat even with the appliance on, This resulted in significant improvements in the nasal symmetry were found. Our appliance, namely K-NAM, extends the wearing time within the limited period and as a result it is expected to maximize the treatment effects. Used properly, this appliance would play a major role in enhancing nasal symmetry with satisfactory results.

도시공원의 공간별 적정조도

김진선,최연철,Kim Jin-Seon,Choi Yeon-Chul 한국조경학회 2004 韓國造景學會誌 Vol.32 No.5

In this study, 1 dependent variable and 9 independent variables were established to examine suitable illuminance by spaces in urban parks in consideration of night users' psychological reactions and activity types. Such fixed variables were evaluated by a series of experiments of changing illuminance, and correlation among those variables was verified by correlation analysis and multiple regression analysis to suggest suitable illuminance by spaces. The results of this study are as follows: 1) The independent variables influencing suitable illuminance by spaces in urban parks were directly influenced rather by the psychological reaction of night users than the activity types by spatial functions. 2) Securing suitable illuminance by spaces commonly increased spatial availability, created certain atmosphere, and provided safety in the psychological reaction of night users. 3) Suitable illuminance by spaces in urban parks is: Central square is 31.88lx, resting space 6.30lx, exercising space 33.14lx, children's playground 14.19lx, pedestrian road 12.29lx, entry space 16.30lx, and green space 7.03lx. That is, when a place had more positive activities, spatial illuminance was increased. 4) Though comparison by spaces with the illuminance standard for urban parks as mentioned in KS A 3011-1993 can not be made, such illuminance was relatively compatible with the permissible range of illuminance in the author's opinion. It is expected that this study investigating suitable illuminance by spaces for night use in urban parks, will provide necessary knowledge for securing suitable illuminance by spaces in urban parks through classifyingin detail the illuminance standard of KS A 3011-1993. Besides, by helping make us aware of the importance of illuminance in urban parks as well as of external space in the night, this study will contribute to academic research and development in the field of landscape architecture and associated fields and be utilized in establishing legal and institutional standards.

부식된 핵연료 피복관과 지지격자 사이의 프레팅 마멸 특성

김진선,박세민,김용환,이승재,이영제,Kim, Jin-Seon,Park, Se-Min,Kim, Yong-Hwan,Lee, Seung-Jae,Lee, Young-Ze 한국트라이볼로지학회 2007 한국윤활학회지(윤활학회지) Vol.23 No.3

Fuel cladding tubes in nuclear fuel assembly are held up by supporting grids because the tubes are long and slender. Fluid flows of high-pressure and high-temperature in the tubes cause oscillating motions between tubes and supports. This is called as FIV (flow induced vibration), which causes fretting wear in contact parts of tube and support. The fretting wear of tube and support can threaten the safety of nuclear power plant. Therefore, a research about the fretting wear characteristics of tube-support is required. The fretting wear tests were performed with supporting grids and cladding tubes, especially after corrosion treatment on tubes, in water. The tests were done using various applied loads with fixed amplitude. From the results of fretting tests, the wear amounts of tube materials can be predictable by obtaining the wear coefficient using the work rate model. Due to stick phenomena the wear depth was changed as increasing load and temperature. The maximum wear depth was decreased as increasing the water temperatures. At high temperatures there are the regions of some severe adhesion due to stick phenomena.

LCD-BLU용 외부전극형광램프의 광효율 측정과 결과분석

김진선,정희석,조광섭,Kim, Jin-Seon,Jeong, Hui-Seok,Jo, Gwang-Seop 한국정보디스플레이학회 2008 인포메이션 디스플레이 Vol.9 No.6

21세기 한강! 살.가.지 운동으로 새롭게 디자인하자

김진선,Kim, Jin-Seon 한국하천협회 2007 하천과 문화 Vol.3 No.4

개별공조용 제어방식의 어제와 오늘

김진선,Kim, Jin-Seon 한국설비기술협회 1994 설비 : 공조ㆍ냉동ㆍ위생 Vol.11 No.5

고등각막표면굴절교정레이저절제술에서 근시교정량이 고위수차의 장기간 변화에 미치는 효과

김진선,이상범,Jin-Seon Kim,Sang-Bumm Lee 대한안과학회 2010 대한안과학회지 Vol.51 No.9

Purpose: To evaluate the effects of the amount of myopic correction on long-term changes in higher-order wavefront aberrations (HOAs) in advanced surface ablation-photorefractive keratectomy (ASA-PRK). Methods: The 193 eyes of 101 patients who underwent ASA-PRK were divided into two groups according to the amount of myopic correction by the median value (Group 1 ≤ -4.37D, 97 eyes, mean -3.26 ± 0.77D; Group 2 > -4.37D, 96 eyes, mean -5.77 ± 1.00D). Wavefront aberrometry was performed to measure total HOA, coma, trefoil, and spherical aberration preoperatively and at 1, 3, 6, 12, and 24 months after ASA-PRK. Statistical analysis was performed to compare changes in all HOAs between the two groups. Results: Each magnitude of total HOA, coma, and spherical aberration except trefoil significantly increased at 1, 3, 6, 12, and 24 months postoperatively in each group (p<0.05), and the increases were statistically significantly higher in group 2 compared to those of group 1 (p<0.05). The amount of changes in all HOAs except trefoil revealed that statistically significantly higher increases in group 2 compared to those of group 1 were determined only in the short-term period (up to 1 month, p<0.05), but not in the medium-term (1 to 6 months) or long-term periods (6 to 24 months). Conclusions: Postoperative total HOA, coma, and spherical aberration significantly increased in both groups, and these increases in surgery-induced HOAs were significantly higher in group 2 (> -4.37D). Increases in ASA-PRK-induced HOAs primarily originated from short-term changes in the postoperative one-month period and did not return to the preoperative level during the postoperative two-year period. J Korean Ophthalmol Soc 2010;51(9):1184-1195

대전입자형 디스플레이 소자의 점유면적 평가방법에 의한 구동특성 및 메모리 효과 분석

김진선,김영조,Kim, Jin-Sun,Kim, Young-Cho 한국전기전자재료학회 2011 전기전자재료학회논문지 Vol.24 No.8

The charged particle type display is a kind of the reflectivity type display and shows an image by absorption and reflection of external light source, which has keep an image without additional electric power because of bistability. In this paper, we made a device whose cell gap is $56\;{\mu}m$ and also analyzed driving and memory characteristics by applied driving voltages. As a result, we found that the driving voltage and memory effect depend on q/m(charge to mass ratio) of charged particle. In this case of breakdown voltage, the devices showed degradation of reflectivity and memory effect due to irregular movement of overcharged particles. In addition, contrast ratio of the device varies with memory effect. Thus, we consider that device needs uniform q/m for improvement of electric and optical properties and memory effect.

대전입자형 디스플레이 소자의 충전전압에 따른 구동특성 분석

김진선,김영조,Kim, Jin-Sun,Kim, Young-Cho 한국전기전자재료학회 2012 전기전자재료학회논문지 Vol.25 No.1

The charged particle type display device is a kind of the reflectivity type display and shows an image by absorption and reflection of external light source. The charged particle is important factor for driving of the display and quantity of charge per mass of the charged particle determines the driving voltage, contrast ratio, response time, etc. But it is easy for the charged particles to be damaged in the putting process of the display and the damages cause lumping phenomenon of the charged particles. Because the lumping phenomenon makes high driving voltage, low quality of optical properties, short life time, etc, so the charged particles must be filled by stable putting methods. In this paper, we filled the charged particles into the panels by electric fields to improve the electrical and optical characteristics of the display. Also, we analyzed the driving characteristics of the charged particles according to the applied putting voltages.